Vinju Vasudevan Srinivasan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Vinju Vasudevan Srinivasan has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Anand Ramanathan
Center for Environmentally Beneficial Catalysis, The University of Kansas, Lawrence, Kansas 66047, United States
7 shared publications - Muthusamy Poomalai Pachamuthu
Department of Chemistry
7 shared publications Rajamanickam Maheswari
Department of Chemistry, Anna University, Chennai 600025, India
7 shared publicationsGaffar Imran
4 shared publications- Ramkumar Vanaraj
Department of Molecular Analytics, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Thandalam, Chennai 602105, Tamil Nadu, India
4 shared publications A. Selvamani
3 shared publications
Latest Publications
- Open Access
Microwave-Assisted Catalytic Conversion of 5-HMF for Biofuel Additives by Molybdophosphoric Acid Encapsulated KCC-1
In this work, the microwave-assisted reaction of 5-hydroxymethylfurfural (5-HMF) into valuable ether and acylated production formation was investigated with the help of molybdophosphoric acid encapsulated dendritic fibrous silica (KCC-1) as a catalyst. XRD, N2 adsorption-desorption, SEM, FT-IR, NH3-TPD, and TEM were used to analyze the physicochemical and structural properties of the synthesized catalysts. The microwave etherification of 5-HMF with ethanol was tested using synthesized catalysts. The effects of the reaction temperature, reaction time, catalytic amount, and microwave power were investigated. The resulting MPA-KCC-1 and IMPA-KCC-1 catalysts demonstrated excellent activity for the etherification of 5-HMF with ethanol, producing 5-(hydroxymethyl) furfural diethyl acetal (HMFDEA) and 5-(ethoxymethyl)furfural diethyl acetal (EMFDEA) products selectively. The significant advantages of the work are the selective production of EMFDEA at 82%, the catalyst can be easily removed via filtration, and the catalyst activity remains nearly intact even after five reaction cycles.
Open AccessMicrowave-Assisted Catalytic Conversion of 5-HMF for Biofuel Additives by Molybdophosphoric Acid Encapsulated KCC-1
In this work, the microwave-assisted reaction of 5-hydroxymethylfurfural (5-HMF) into valuable ether and acylated production formation was investigated with the help of molybdophosphoric acid encapsulated dendritic fibrous silica (KCC-1) as a catalyst. XRD, N2 adsorption-desorption, SEM, FT-IR, NH3-TPD, and TEM were used to analyze the physicochemical and structural properties of the synthesized catalysts. The microwave etherification of 5-HMF with ethanol was tested using synthesized catalysts. The effects of the reaction temperature, reaction time, catalytic amount, and microwave power were investigated. The resulting MPA-KCC-1 and IMPA-KCC-1 catalysts demonstrated excellent activity for the etherification of 5-HMF with ethanol, producing 5-(hydroxymethyl) furfural diethyl acetal (HMFDEA) and 5-(ethoxymethyl)furfural diethyl acetal (EMFDEA) products selectively. The significant advantages of the work are the selective production of EMFDEA at 82%, the catalyst can be easily removed via filtration, and the catalyst activity remains nearly intact even after five reaction cycles.
- 3 September 2020
- Published by Taylor & Francis in International Journal of Environmental Analytical Chemistry
- Vol. 102 (18) , 6359-6372
Efficient reduction of dyes to leuco form over silver nanoparticles on functionalised SBA-15 and aminoclay
In this work, a simple chemical method for synthesis of Ag nanoparticles (NPs) incorporated on amine-functionalised mesoporous silica SBA-15 support (Ag/NH2-SBA-15) is reported for various dye degradation as the first time. The synthesised sample was characterised by powder XRD, BET surface area and pore size analyser, ICP-OES, XPS HRTEM, and HRSEM techniques. About 5 nm-sized Ag nanoparticles are dispersed over the support. The Ag/NH2-SBA-15 catalytic efficiency was investigated on various dyes degradation such as Malachite green (MG), Phenol red (PR), Bromophenol blue (BPB), Rose Bengal (RB), Methylene Blue (MB), Rhodamine derivatives (Rh 6 G, Rh B), Congo red (CR) and 4-Nitrophenol (4-NP) in the presence of NaBH4. About 90% degradation efficiency resulted in 6 min of reaction time in the presence of a catalyst. Besides, the Ag/NH2-SBA-15 catalyst activity has been compared with homogeneous Ag/aminoclay and shown higher catalytic activity. All the reactions were monitored by UV-Visible spectrometer. The reaction kinetics of Ag nanoparticle catalysed reduction illustrates pseudo-first-order kinetics with the rate constant for the reduction is in the order Ag/NH2-SBA-15 (3.34 × 10−1 s−1) and Ag/aminoclay (1.80 × 10−2 s−1).
- 3 September 2020
- Published by Taylor & Francis in International Journal of Environmental Analytical Chemistry
- Vol. 102 (18) , 6359-6372
Efficient reduction of dyes to leuco form over silver nanoparticles on functionalised SBA-15 and aminoclay
In this work, a simple chemical method for synthesis of Ag nanoparticles (NPs) incorporated on amine-functionalised mesoporous silica SBA-15 support (Ag/NH2-SBA-15) is reported for various dye degradation as the first time. The synthesised sample was characterised by powder XRD, BET surface area and pore size analyser, ICP-OES, XPS HRTEM, and HRSEM techniques. About 5 nm-sized Ag nanoparticles are dispersed over the support. The Ag/NH2-SBA-15 catalytic efficiency was investigated on various dyes degradation such as Malachite green (MG), Phenol red (PR), Bromophenol blue (BPB), Rose Bengal (RB), Methylene Blue (MB), Rhodamine derivatives (Rh 6 G, Rh B), Congo red (CR) and 4-Nitrophenol (4-NP) in the presence of NaBH4. About 90% degradation efficiency resulted in 6 min of reaction time in the presence of a catalyst. Besides, the Ag/NH2-SBA-15 catalyst activity has been compared with homogeneous Ag/aminoclay and shown higher catalytic activity. All the reactions were monitored by UV-Visible spectrometer. The reaction kinetics of Ag nanoparticle catalysed reduction illustrates pseudo-first-order kinetics with the rate constant for the reduction is in the order Ag/NH2-SBA-15 (3.34 × 10−1 s−1) and Ag/aminoclay (1.80 × 10−2 s−1).
- 1 October 2019
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 287, 159-166
Preparation of mesoporous stannosilicates SnTUD-1 and catalytic activity in levulinic acid esterification
- 1 October 2019
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 287, 159-166
Preparation of mesoporous stannosilicates SnTUD-1 and catalytic activity in levulinic acid esterification
- 1 June 2018
- Published by Elsevier in Journal of Rare Earths
- Vol. 36 (6) , 603-612
Effective removal of automobile exhausts over flower-like Ce1−Cu O2 nanocatalysts exposed active {100} plane
- 1 June 2018
- Published by Elsevier in Journal of Rare Earths
- Vol. 36 (6) , 603-612
Effective removal of automobile exhausts over flower-like Ce1−Cu O2 nanocatalysts exposed active {100} plane
- 9 August 2017
- Published by Wiley in Polymer Composites
- Vol. 39 (12) , 4425-4433
Synthesis and characterization of alkyl chain containing polytriazoleimide/reduced graphene oxide nanocomposites
Polytriazoleimide/reduced graphene oxide (PTAI/RGO) nanocomposites were prepared by typical solution casting and thermal imidization method. Initially, the GO was synthesized by Hummers method, then reduced with hydrazine hydrate to obtain RGO and the diamine containing 1,2,3‐triazole ring and alkyl chain were synthesized by the 1,3‐dipolar cycloaddition reaction in the presence of Cu(I) catalyst by click reaction. The monomers and polymers were characterized by FTIR and NMR spectroscopy. The mechanical, thermal, and morphological properties of PTAI/RGO (0, 1, 2 and 3 wt%) are reported. The glass transition temperature of the nanocomposites is in the range of 164–182°C. The tensile strength of the PTAI/RGO nanocomposites film was dramatically increased from 72 to 114 MPa from 0 to 3 wt% of RGO, which is ∼53% of improvement compared to that of pure PTAI films and the corresponding tensile modulus increased from 1.4 to 2.65 GPa. The thermogravimetric analysis (TGA) of the nanocomposites improved the thermal stability by the addition of RGO. The temperature corresponding 5% (T5%) weight loss are in the range of 280–331°C. The dispersion of RGO in the surface of the nanocomposites was analyzed by scanning electron microscopy and transmission electron microscopy. This effective approach shows a potential application in polyimides‐based nanocomposites. POLYM. COMPOS., 39:4425–4433, 2018. © 2017 Society of Plastics Engineers
- 9 August 2017
- Published by Wiley in Polymer Composites
- Vol. 39 (12) , 4425-4433
Synthesis and characterization of alkyl chain containing polytriazoleimide/reduced graphene oxide nanocomposites
Polytriazoleimide/reduced graphene oxide (PTAI/RGO) nanocomposites were prepared by typical solution casting and thermal imidization method. Initially, the GO was synthesized by Hummers method, then reduced with hydrazine hydrate to obtain RGO and the diamine containing 1,2,3‐triazole ring and alkyl chain were synthesized by the 1,3‐dipolar cycloaddition reaction in the presence of Cu(I) catalyst by click reaction. The monomers and polymers were characterized by FTIR and NMR spectroscopy. The mechanical, thermal, and morphological properties of PTAI/RGO (0, 1, 2 and 3 wt%) are reported. The glass transition temperature of the nanocomposites is in the range of 164–182°C. The tensile strength of the PTAI/RGO nanocomposites film was dramatically increased from 72 to 114 MPa from 0 to 3 wt% of RGO, which is ∼53% of improvement compared to that of pure PTAI films and the corresponding tensile modulus increased from 1.4 to 2.65 GPa. The thermogravimetric analysis (TGA) of the nanocomposites improved the thermal stability by the addition of RGO. The temperature corresponding 5% (T5%) weight loss are in the range of 280–331°C. The dispersion of RGO in the surface of the nanocomposites was analyzed by scanning electron microscopy and transmission electron microscopy. This effective approach shows a potential application in polyimides‐based nanocomposites. POLYM. COMPOS., 39:4425–4433, 2018. © 2017 Society of Plastics Engineers
- 31 July 2017
- Published by Wiley in ChemistrySelect
- Vol. 2 (22) , 6223-6230
Selective Oxidation of Cyclohexane Using Graphene Oxide‐Supported Ceria Nanocomposites with Exposed Active {1 0 0} Facets
The present study is focused on the synthesis and characterization of ceria loaded graphene oxide (GO) and investigates their catalytic activity on vapor phase selective oxidation of cyclohexane. In this regards, we have synthesized various loading of CeO 2 on GO with two different morphology includes nanocrystals and flower‐like, which designated as CeO 2 ( x )/GO (where x= 0, 0.2, 0.4, 0.6, 0.8 and 1.0 wt.% ). The physico‐chemical properties of the materials were extensively studied with help of XRD, N 2 adsorption desorption (BET), DRUV‐Vis, HRSEM, HRTEM, H 2 ‐TPR and XPS techniques. The crystalline nature of materials were analyzed by XRD, pure ceria shows high crystalline size about 15. 3 nm compared to others. Surface area of synthesized materials has been obtained with help of N 2 adsorption desorption analysis, pure ceria and graphene oxide shows surface area about 93 and 574 m 2 /g, respectively. XPS and DRUV‐Vis spectra were confirms the presence of enormous Ce 3+ ions in the lattice. The presence of nanocrystals and flower‐like morphology of CeO 2 ( x )/GO were confirmed by HRSEM images. HRTEM images were clearly illustrated that the presence of dominant active {1 0 0} facets in flower‐like CeO 2 /GO than that of nanocrystalline morphology. The catalytic activity of materials has been evaluated on selective oxidation of cyclohexane using air as a green oxidant. The key reaction parameters were varied to study the stability, activity and selectivity of the catalysts. The activity of the catalysts is correlated with their physico‐chemical properties, and these results concluded that suitable amount of ceria and it's flower‐like morphology on GO is essential for selective oxidation of cyclohexane at low temperature (180 °C) compared to nanocrystalline morphology. Hence, flower‐like CeO 2 (0.4)/GO is a most suitable catalyst for high conversion (90%) of cyclohexane into cyclohexanone with 74% selectivity due to occurrence of enormous {1 0 0} facet and Ce 3+ .
- 31 July 2017
- Published by Wiley in ChemistrySelect
- Vol. 2 (22) , 6223-6230
Selective Oxidation of Cyclohexane Using Graphene Oxide‐Supported Ceria Nanocomposites with Exposed Active {1 0 0} Facets
The present study is focused on the synthesis and characterization of ceria loaded graphene oxide (GO) and investigates their catalytic activity on vapor phase selective oxidation of cyclohexane. In this regards, we have synthesized various loading of CeO 2 on GO with two different morphology includes nanocrystals and flower‐like, which designated as CeO 2 ( x )/GO (where x= 0, 0.2, 0.4, 0.6, 0.8 and 1.0 wt.% ). The physico‐chemical properties of the materials were extensively studied with help of XRD, N 2 adsorption desorption (BET), DRUV‐Vis, HRSEM, HRTEM, H 2 ‐TPR and XPS techniques. The crystalline nature of materials were analyzed by XRD, pure ceria shows high crystalline size about 15. 3 nm compared to others. Surface area of synthesized materials has been obtained with help of N 2 adsorption desorption analysis, pure ceria and graphene oxide shows surface area about 93 and 574 m 2 /g, respectively. XPS and DRUV‐Vis spectra were confirms the presence of enormous Ce 3+ ions in the lattice. The presence of nanocrystals and flower‐like morphology of CeO 2 ( x )/GO were confirmed by HRSEM images. HRTEM images were clearly illustrated that the presence of dominant active {1 0 0} facets in flower‐like CeO 2 /GO than that of nanocrystalline morphology. The catalytic activity of materials has been evaluated on selective oxidation of cyclohexane using air as a green oxidant. The key reaction parameters were varied to study the stability, activity and selectivity of the catalysts. The activity of the catalysts is correlated with their physico‐chemical properties, and these results concluded that suitable amount of ceria and it's flower‐like morphology on GO is essential for selective oxidation of cyclohexane at low temperature (180 °C) compared to nanocrystalline morphology. Hence, flower‐like CeO 2 (0.4)/GO is a most suitable catalyst for high conversion (90%) of cyclohexane into cyclohexanone with 74% selectivity due to occurrence of enormous {1 0 0} facet and Ce 3+ .
- 1 June 2017
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 5 (3) , 2440-2447
Organic functionalized Fe3O4/RGO nanocomposites for CO2 adsorption
- 1 June 2017
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 5 (3) , 2440-2447
Organic functionalized Fe3O4/RGO nanocomposites for CO2 adsorption
- 1 October 2015
- Published by Elsevier in Materials Research Bulletin
- Vol. 70, 914-919
Characterizations and synergistic catalytic activity of bimetallic Al-Fe-TUD-1
- 1 October 2015
- Published by Elsevier in Materials Research Bulletin
- Vol. 70, 914-919
Characterizations and synergistic catalytic activity of bimetallic Al-Fe-TUD-1
- 1 September 2015
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 165, 72-78
Iron incorporated Ia3d mesostructured silicate prepared at room temperature: Excellent Friedel–Crafts benzylation catalyst
- 1 September 2015
- Published by Elsevier in Materials Chemistry and Physics
- Vol. 165, 72-78
Iron incorporated Ia3d mesostructured silicate prepared at room temperature: Excellent Friedel–Crafts benzylation catalyst
- 20 August 2015
- Published by Springer Nature in Journal of Porous Materials
- Vol. 23 (1) , 57-65
Unique characteristics of MnOx-incorporated mesoporous silicate, Mn-FDU-5, prepared via evaporation induced self assembly
- 20 August 2015
- Published by Springer Nature in Journal of Porous Materials
- Vol. 23 (1) , 57-65
Unique characteristics of MnOx-incorporated mesoporous silicate, Mn-FDU-5, prepared via evaporation induced self assembly