Bikram Gautam has a total of 16 co-authors. Here are the top co-authors by number of shared publications:

  • Rameshwar Adhikari

    Research Center for Applied Science and Technology (RECAST), Tribhuvan University, Kathmandu, Nepal

    4 shared publications
  • Anjita Rajbhanshi

    High Powered Committee for Integrated Development of the Bagmati Civilization (HPCIDBC), Ministry of Urban Development, Ghusewori, Kathmandu, Nepal

    2 shared publications
  • Anima Shrestha

    Department of Microbiology, Tri- Chandra Campus, Department of Microbiology, Kathmandu, Nepal

    1 shared publication
  • Anup Basnet

    Department of Microbiology, St. Xavier’s College, Maitighar, Kathmandu

    1 shared publication
  • David Wayne Ussery

    University of Arkansas for Medical Sciences

    1 shared publication
  • Elisa Dongol

    St. Xavier’s College, Maitighar, Kathmandu, Nepal

    1 shared publication

Latest Publications

  • Open Access

    Review of: "Assessment of Quality of drinking waterbased on the water quality index method in Hawassa Zuria Woreda, Sidama Regional State, Ethiopia"

    by Bikram Gautam

    HNO3 & CaCO3 is mentioned ---→ please have the “3” subscripted APHA has a latest edition but still the authors used 1999 version. Is there any specific reason for it? o C ---→ please have the “o” superscripted insted of “undectable” -----...

  • Open Access

    Microbiological quality assessment (including antibiogram and threat assessment) of bottled water

    by Bikram Gautam

    Water pollution is a major global problem that has been the leading cause of morbidity and mortality. This study was carried out to assess the microbiological quality of popular domestic brands of bottled water available in the Kathmandu Valley in Nepal. For the study of bottled water, a total of 50 samples each of different volumes (20 and 1 L) were selected. The samples were processed at the Microbiology laboratory at St. Xavier's College, Maitighar, Kathmandu. The microbiological assessments were performed as per the methods described in the American Public Health Association, 2005. Out of 100 samples, 48% of samples were found to be contaminated with total coliform. Escherichia coli was the predominant strain among the coliforms. Multidrug‐resistant E. coli, Enterobacter aerogenes, and Pseudomonas aeruginosa were isolated from the 48 bottled water. Treat assessment test revealed that 88.23% of the isolated E. coli produced β hemolytic colonies, while 11.77% did not show hemolytic colonies, 100% E. aerogenes colonies were not able to develop hemolytic colonies and 100%, P. aeruginosa colonies gave β hemolytic colonies, respectively. Chi–square test shows that there is a significant association (p ≤ .05) between fecal coliform and volume of the vessel (i.e., 20 and 1 L), bottle type (i.e., unscratched and undented and scratched and/or dented), season (i.e., monsoon and postmonsoon), and total coliform. Chi‐square test shows that there is no significant (p > .05) association between Pseudomonas spp and season (i.e., monsoon and postmonsoon). Out of 100 samples, 48% of samples were found to be contaminated with total coliform. Microorganisms survive in bottled water as they have many nutrients required for the microorganism in ionic form. Surveillance is lacking by the license‐providing organizations followed by governmental organizations.


  • Open Access

    Assessment of Bacterial Load in Polyethylene Terephthalate (PET) Bottled Water Marketed in Kathmandu Valley, Nepal

    by Bikram Gautam, Gaumani Gyanwali, David Wayne Ussery

    In recent years, we are having mixed feelings regarding the use of polyethylene terephthalate (PET) bottles for storing water. The aim of this study is to determine any associations between bacterial load and the physical condition of the water bottle. For this study, bottled water was purchased, and parameters like pH, electrical conductivity (EC), total dissolved solids (TDS), heterotrophic plate count (HPC), total coliform count, and Pseudomonas spp. count were determined as per the American Public Health Association, 2005. The pH value of water samples tested ranged from 5.2 to 6.8. The majority of samples (96) were found to contain pH values that were unacceptable as per the Department of Food Technology and Quality Control (DFTQC) guideline. Value of electrical conductivity (EC) ranged from 5 to 199μS/cm. HPC revealed that, out of 100 samples, 48 (48) samples were found to be acceptable as per the DFTQC guideline value (25cfu/mL). Among 100 samples, Pseudomonas spp. was found to be present in 23 of bottled water. Acidic pH and elevated concentrations of TDS and EC may lead to the survival of extremophiles present in HPC which may lead to degradation of PET. Extremophile bacteria that survive in bottled water for a long time rely on several survival mechanisms including evolutionary development (evo-devo) and solely survive on complex polymers like PET.


  • Open Access

    Chemical Evaluation of Trace Elements in Bottled Water

    by Bikram Gautam

    Sales of bottled water have been increasing around the globe. This study was carried out to assess the trace elements present in bottled water. For the study of bottled water, a total of 100 samples of different volumes (20 L and 1 L) were selected. The physicochemical assessments were performed as per the methods described in the American Public Health Association, 2005. Average values of pH, electrical conductivity, total dissolved solids, and turbidity were found to be 5.96±0.54, 59.97±58.65, 4.42±3.69, and 0.408±0.19, respectively. Likewise, average values of total hardness (as CaCO3), calcium (as CaCO3), magnesium (as CaCO3), chlorine, iron, copper, cobalt, nickel, fluoride, sodium, and potassium were found to be 14.78±8.43, 3.26±1.55, 11.51±7.92, 7.51±3.21, 0.0032±0.0017, 0.0091±0.0116, 0.2520±0.0127, 0.0080±0.0082, 0.047±0.0139, 12.65±10.90, and 1.41±2.00, respectively; meanwhile residual chlorine, zinc, silver, cadmium, and lead were below detection limit. All the physicochemical characteristics of bottled water were found to be within International Bottled Water Association (IBWA) guidelines. From the physicochemical aspects, the bottled water was found to be within the permissible value set by IBWA. Pearsons correlation revealed significant association between trace elements. Levenes test for equity of variances indicated that the majority (iron, copper, cobalt, nickel, fluoride, sodium, and potassium) of trace elements and seasons (monsoon and postmonsoon) demonstrated a statistically significant distribution (at 95 confidence interval). At elevated concentrations, some elements can be harmful to human health and can cause morphological abnormalities, mutagenic effects, reduced growth, and increased morbidity and mortality in humans but it all depends upon a persons metabolic factors, genetic factors, and ability to excrete trace elements through different routes, etc. Water could have percolated down from the surface to the ground water and as such the difference in concentration of trace elements in monsoon and postmonsoon seasons could be noticeable.


  • Open Access

    Evaluation of ginger extract’s yield, using cold extraction method and its antimicrobial activity against pathogens

    by Bikram Gautam, Richa Nepal, Rupa Bhandari, Shishir Gyawali

    Ginger is commonly used herb across the world either in a meal or in herbal products. The chemical constituents of ginger possess antioxidants, can modulate apoptosis, inhibit vascular endothelial growth factor and inhibit inflammatory reactions. The main aim of this study is to assess the antimicrobial activity of the ginger extracts. For this purpose, ginger rhizome (R), packaged ginger powder (P) and ginger leaves (L) were collected from Urlabari, Morang and Kathmandu, Nepal. The plant materials were first minced (except P) and then extracted using cold extraction technique. For assessing the antimicrobial activity of the extracts against the American Type Culture Collection (ATCC) strains, cup well method was preferred. The percentage yield of extracts R, P, L and ginger rhizome’s juice (J) was 10.79 ± 0.03 %, 9.76 ± 0.16 %, 8.17 ± 0.07 % and 16.8 ± 1.98 % respectively. The extract R were found to susceptible against the pathogens Streptococcus pneumoniae, Klebsiella pneumoniae, Escherichia coli, Staphylococcus aureus and methicillin resistant Staphylococcus aureus (MRSA). The extract P were found to susceptible against the pathogens E. coli, S. aureus and MRSA. The methanol extract of L was found to be susceptible to S. aureus, K. pneumoniae and MRSA. All the extracts (R, P, L) were reistant against Pseudomonas aeruginosa. All 6 bacterial isolates were resistant against the extract J. The extract shows antimicrobial property only when the extract is concentrated. The ginger leaves also have antimicrobial property. Asian J. Med. Biol. Res. March 2019, 5(1): 8-13


  • Open Access

    Bacterial Load Reduction in Guheswori Sewage Treatment Plant, Kathmandu, Nepal

    by Bikram Gautam, Anjita Rajbhanshi, Rameshwar Adhikari

    Background: Water sources such as lakes, ponds, river etc. have been continuously contaminated by the micro organisms and chemicals. The former can pose a significant threat to human health. This work aims at detecting the bacterial load before and after the sewage treatment and hence isolating pathogens from the sewage before primary treatment and secondary treated effluent. Methods: Grab sampling (50mL sewage before primary treatment and secondary treated effluent) was performed for 20 days in the Guheswori sewage treatment plant. The reduction in microbial load was determined through heterotrophic plate count. Pathogens were screened from the effluent obtained from the secondary treatment plant. Results: Bacterial load reduction was found to be about 48.02% on average. The observed bacterial load reduction might have been caused by bacteriophage flocculation and sedimentation. Pathogens isolated from the treated effluent were Escherichia coli, Salmonella Typhi, Enterococcus faecalis, Staphylococcus aureus, Coagulase negative Staphylococcus (CONS), Citrobacter fruendii, Enterobacter aerogenes, Proteus mirabilis, P. vulgaris, Pseudomonas aeruginosa. Conclusions: It has been found that the sewage treatment plant helps to reduce the bacterial load which is, however, not capable of effluent polishing where all pathogens are killed.


  • Open Access

    Association of Antibiotic and Heavy Metal Resistant Bacteria Screened from Wastewater

    by Bikram Gautam, Rameshwar Adhikari

    Wastewater treatment plant is a potential reservoir contributing to the evolution and spread of heavy metal and antibiotic resistant bacteria. The pollutants such as biocides, antibiotics, heavy metals are to be feared for as they have been known to evoke resistance in microorganisms in such polluted environment. The aim of this study was to the isolate bacteria from the treated wastewater and assess the resistance pattern of the isolates against antibiotics and heavy metals. Grab sampling was performed from April to June 2017, from the treated effluent from the secondary treatment plant. To assess the resistance pattern for antibiotic(s) and heavy metal(s), antibiotic susceptibility test and minimum inhibitory concentration by cup well method were performed respectively. Staphylococcus aureus, Enterococcus faecalis, Citrobacter freundii, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis, P. vulgaris, Salmonella Typhi, Pseudomonas aeruginosa were isolated. Multi drug and heavy metal resistant isolates were screened. Fisher’s exact test revealed that there is a significant association (p< 0.001) between antibiotic resistance pattern and resistance patterns at dilution of 2500 g/L (25%). Cramer’s V test revealed that the effect size of antibiotic resistance pattern and heavy metal resistance pattern at dilution 2500 g/L is medium. P. aeruginosa was able to resist the metal concentration up to 10000 g/L (100%) dilution of Fe++. Heavy metal resistant bacteria can be safely used to lower chemical concentration in the environment once their harmful genes are edited, knocked etc. so that risks of evoking antibiotic resistance could be minimized.


  • Efficacy of Toothpaste in Reducing Micro-Flora Isolated from Toothbrush

    by Bikram Gautam, Sabi Pokhrel, Sagar Aryal, Anup Basnet

    Oral cavity is the easiest site of entry of microorganisms during breathing, eating, drinking and brushing which can lead to several bacterial infections in oral cavity, pharynx, larynx, gastrointestinal tracts etc. Toothbrushes commonly used to maintain oral health and prevent dental disease; but unfortunately, how keeping the toothbrush is neglected. A wide range of chemicals have been added to toothpastes in order to produce a direct inhibitory effect on plaque formation and kill microorganisms. The aims of the study were to investigate the relationship between toothbrush keeping place, its microbial content determine the type of micro-flora present in toothbrush kept in different locations and to determine efficacy of toothpaste in reducing micro-flora isolated from toothbrush. Used toothbrushes were taken from 21 individuals. 2 (1 herbal and 1 regular) toothpastes were selected for the study and were collected from local market. Standard pour plate method and plate count method were performed to determine the reduction of microbial load. Out of 21 toothbrushes, 19 (90.48%) were found to be growth positive and 2 (9.52%) were growth negative. Common Gram positive organisms isolates includes Lactobacillus species (20%), Bacillus subtilis (5%), Bacillus megaterium (5%), Stahpylococcus aureus (25%), Staphylococcus epidermidis (10%), Micrococcus species (10%) and Gram negative organisms isolated include Citrobacter freundii (5%), Pseudomonas aeruginosa (5%), Proteus mirabilis (5%), Enterobacter species (5%) and Klebsiella pneumonia (5%). Toothbrushes kept in the toilet/bathroom showed contamination with pathogens. Toothpaste T1 was found to be better at reducing microbial load compared to T2. Toilet/bathroom is the worst place for keeping toothbrushes. Toothpastes have their own patent, specialty and were found to be effective against the microorganisms. Synergistic interactions between the principal components of toothpaste can be considered to be a vital part of their efficacy.Kathmandu University Journal of Science, Engineering and TechnologyVol. 13, No. 2, 2017, page: 71-78


  • Open Access

    Comparison of Membrane Filtration and Replica Plate Technique to Detect Fecal Coliform

    by Bikram Gautam, Rameshwar Adhikari

    Introduction: Membrane filtration (MF) is one of the widely used technique on a routine basis. On the other hand, replica plate (RP) technique can be used to transfer existing bacterial colonies in two plates which even allows pinpointing the original colony. The aim of this study is to comparatively detect the cfu/100 mL of fecal coliform using membrane filtration and replica plate techniques.Methods: In the study, a total of 25 bottled water were selected from the local market in Kathmandu valley. The total coliform count was detected using MF, while fecal coliform was detected using both MF and RP technique.Results: It was found that the average cfu/100 mL for total coliform, fecal coliform (MF) and fecal coliform (RP) were 143.38, 49.82 and 51.00 respectively. Pearson correlation coefficient calculated between total coliform and fecal coliform (MF), total coliform and fecal coliform (RP), fecal coliform (MF) and fecal coliform (RP) were found to be 0.695, 0.733 and 0.990 respectively; implying a positive correlation Conclusions: It has been demonstrated that intrinsic and extrinsic factors influence colony forming units. Furthermore, RP is a more sensitive method for screening fecal coliforms although both MF and RP can be efficiently used.


  • Isolation of Bacteriophage from Guheswori Sewage Treatment Plant Capable of Infecting Pathogens

    by Bikram Gautam, Lomas Aryal, Sachana Adhikari, Manoj Rana, Anjita Rajbhanshi, Sunita Ghale, Rameshwar Adhikari

    Background: Waste water contains microorganisms which are continuously shed in the feces. These microorganisms especially bacteria might acquire antibiotic resistance and pose a significant threat to human health. Therefore, this work aims at isolating bacteriophage capable of infecting the isolated bacteria. Methodology: For this purpose, the grab sampling was performed at the Guheswori sewage treatment plant from the inlet in the primary treatment plant and from the outlet of the secondary treatment plant. For the isolation of bacteriophage, bacteriophage in the sewage was first enriched in an isolated pathogen, then filtered and then subjected to the isolates in the nutrient agar. Results: Pathogens like Escherichia coli, Salmonella Typhi, Enterococcus faecalis, Staphylococcus aureus, Coagulase negative Staphylococcus (CONS), Citrobacter fruendii, Enterobacter aerogenes, Proteus mirabilis, P. vulgaris, Pseudomonas aeruginosa were screened. Bacteriophage was able to infect E. coli (p < 0.001), S. Typhi (p < 0.001), E. faecalis (p = 0.182); and unable to infect S. aureus, CONS, C. fruendii, E. aerogenes, P. mirabilis, P. vulgaris, P. aeruginosa. Conclusion: Bacteriophage are able to infect and kill pathogens like E. coli, S. Typhi, E. faecalis and unable to infect S. aureus, CONS, C. fruendii, E. aerogenes, P. mirabilis, P. vulgaris, P. aeruginosa. Among all other reasons of lowering bacterial load, bacteriophages could also be one of the confounding factor. Such bacteriophage able to infect and undergo lytic cycle could be used in phage typing.