Radmila Sinđić Grebović
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Radmila Sinđić Grebović has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
Željka Radovanović
3 shared publicationsMarko Grebovic
University of Donja Gorica, Faculty for Information Systems and Technologies
1 shared publicationMarko Grebović
University of Montenegro
1 shared publication- Mina Grebović
University of Montenegro
1 shared publication - Nikolai Vatin
Advanced Engineering School for Digital Engineering, Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russian Federation
1 shared publication - Nina Serdar
Faculty of Civil Engineering, University of Montenegro
1 shared publication
Latest Publications
- Open Access
- 23 September 2026
- Published by Association of Structural Engineers of Serbia
- Vol. 1 (1) , 551-560
NUMERICAL ANALYSIS OF A NON-SLENDER HIGH-STRENGTH CONCRETE BEAM USING ABAQUS
The shear design of non-slender reinforced high-strength concrete (HSC) beams remains questionable, as indicated by experimental findings. This paper aims to perform a numerical simulation of a non-slender HSC beam and compare the results with experimental data. A finite element model of the tested HSC beam was developed in Abaqus, incorporating the properties as specified in the experimental study. The numerical results are compared with experimentally obtained ultimate load and observed failure mode, as well as with results derived from the simple and refined Strut-and-Tie Model (STM). The comparison shows reasonable agreement between numerical and experimental responses, while certain differences are observed relative to STM predictions. The study demonstrates that finite element modeling can serve as a useful complementary tool for evaluating the shear behavior of non-slender beams and for assessing the reliability of STM in practical design.
- 23 September 2026
- Published by Association of Structural Engineers of Serbia
- Vol. 1 (1) , 551-560
Open AccessNUMERICAL ANALYSIS OF A NON-SLENDER HIGH-STRENGTH CONCRETE BEAM USING ABAQUS
The shear design of non-slender reinforced high-strength concrete (HSC) beams remains questionable, as indicated by experimental findings. This paper aims to perform a numerical simulation of a non-slender HSC beam and compare the results with experimental data. A finite element model of the tested HSC beam was developed in Abaqus, incorporating the properties as specified in the experimental study. The numerical results are compared with experimentally obtained ultimate load and observed failure mode, as well as with results derived from the simple and refined Strut-and-Tie Model (STM). The comparison shows reasonable agreement between numerical and experimental responses, while certain differences are observed relative to STM predictions. The study demonstrates that finite element modeling can serve as a useful complementary tool for evaluating the shear behavior of non-slender beams and for assessing the reliability of STM in practical design.
- Open Access
- 1 June 2026
- Published by University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy
- Vol. 17 (1) , 982-992
CONSTRUCTION WASTE MANAGEMENT PLAN FOR REHABILITATION OF THE ĐURĐEVIĆA TARA BRIDGE
The rehabilitation and reconstruction of the Đurđevića Tara Bridge, a structure of national importance, located within a protected area, the UNESCO Biosphere Reserve, inevitably generates various types of construction waste. This paper presents the waste management approach, focusing on the identification, source separation, temporary storage, and transport of inert and hazardous waste. The plan emphasizes minimizing the impact on the sensitive Tara Canyon ecosystem, promoting recycling and the exclusive use of authorized operators for disposal. However, the plan relies on local capacity and digital systems assumptions; failure risks environmental contamination and legal penalties.
- 1 June 2026
- Published by University of Banja Luka, Faculty of Architecture, Civil Engineering and Geodesy
- Vol. 17 (1) , 982-992
Open AccessCONSTRUCTION WASTE MANAGEMENT PLAN FOR REHABILITATION OF THE ĐURĐEVIĆA TARA BRIDGE
The rehabilitation and reconstruction of the Đurđevića Tara Bridge, a structure of national importance, located within a protected area, the UNESCO Biosphere Reserve, inevitably generates various types of construction waste. This paper presents the waste management approach, focusing on the identification, source separation, temporary storage, and transport of inert and hazardous waste. The plan emphasizes minimizing the impact on the sensitive Tara Canyon ecosystem, promoting recycling and the exclusive use of authorized operators for disposal. However, the plan relies on local capacity and digital systems assumptions; failure risks environmental contamination and legal penalties.
- Open Access
- 26 March 2025
- Published by Faculty of Geotechnical Engineering, University of Zagreb in Environmental engineering
- Vol. 11 (1-2) , 7-13
Fiber-reinforced concrete as an aspect of green construction technology
This paper investigates the effects of the different types and percentages of fiber reinforcements in concrete on structures' design life. The primary parameter of the analysis is the tensile strength of concrete in correlation with compressive strength in dependence on the type and quantity of fibers. Using fiber reinforcement allows obtaining a pattern of evenly distributed micro-cracks instead of the usual system of localized individual relative wide cracks and increases the durability of structures. The durability of concrete is evaluated from the probability of the appearance of cracks through a comparative analysis of the results of experimental tests for mixtures with different types and amounts of fibers. The subject of the analysis is also a mixture of concrete made by increasing the coarse aggregate from recycled materials content and lower consumption of cementitious materials as a green concrete option with improved resistance to aggressive environmental influences. The main goal is to assess fiber-reinforced concrete (FRC) as cost-effective and green by increasing the recycled aggregate content and lowering the consumption of cementitious materials. A comparative analysis of results gained by statistical and machine learning methods is performed for the influential parameters' assessment of the FRC structures' design life.
- 26 March 2025
- Published by Faculty of Geotechnical Engineering, University of Zagreb in Environmental engineering
- Vol. 11 (1-2) , 7-13
Open AccessFiber-reinforced concrete as an aspect of green construction technology
This paper investigates the effects of the different types and percentages of fiber reinforcements in concrete on structures' design life. The primary parameter of the analysis is the tensile strength of concrete in correlation with compressive strength in dependence on the type and quantity of fibers. Using fiber reinforcement allows obtaining a pattern of evenly distributed micro-cracks instead of the usual system of localized individual relative wide cracks and increases the durability of structures. The durability of concrete is evaluated from the probability of the appearance of cracks through a comparative analysis of the results of experimental tests for mixtures with different types and amounts of fibers. The subject of the analysis is also a mixture of concrete made by increasing the coarse aggregate from recycled materials content and lower consumption of cementitious materials as a green concrete option with improved resistance to aggressive environmental influences. The main goal is to assess fiber-reinforced concrete (FRC) as cost-effective and green by increasing the recycled aggregate content and lowering the consumption of cementitious materials. A comparative analysis of results gained by statistical and machine learning methods is performed for the influential parameters' assessment of the FRC structures' design life.
- 19 June 2019
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 292, 56-62
Estimation of Tensile Strength of High Strength Concrete Based on Experimental Results
Use of high strength concrete require reliable predictions of correlations of compressive strength with tensile strength or splitting strength. Analysis of correlation between tensile strength of concrete and compressive strength, based on experimental results, is shown in this paper. It is proposed new simple correlation. Regression analysis that use, is based on the results of the experimental researches of compressive strength and splitting tensile strength, at specimens of high strength concrete. Comparative analysis of test results, gained for high strength concrete and normal strength concrete is performed. Analysis comprises the results of the experimental research of deep beams subjected to shear. Stresses measured on surfaces of high strength concrete beams subjected to shear and level of stresses that induce inclined cracks in concrete are applied. Relationship between concrete compressive strength and shear cracking stresses is studied, too. Experimental research was done at pairs of the beams made of concrete with high compressive strength and normal compressive strength. Estimation of validation of relations prescribed by the design codes for high strength concrete has performed.
- 19 June 2019
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 292, 56-62
Estimation of Tensile Strength of High Strength Concrete Based on Experimental Results
Use of high strength concrete require reliable predictions of correlations of compressive strength with tensile strength or splitting strength. Analysis of correlation between tensile strength of concrete and compressive strength, based on experimental results, is shown in this paper. It is proposed new simple correlation. Regression analysis that use, is based on the results of the experimental researches of compressive strength and splitting tensile strength, at specimens of high strength concrete. Comparative analysis of test results, gained for high strength concrete and normal strength concrete is performed. Analysis comprises the results of the experimental research of deep beams subjected to shear. Stresses measured on surfaces of high strength concrete beams subjected to shear and level of stresses that induce inclined cracks in concrete are applied. Relationship between concrete compressive strength and shear cracking stresses is studied, too. Experimental research was done at pairs of the beams made of concrete with high compressive strength and normal compressive strength. Estimation of validation of relations prescribed by the design codes for high strength concrete has performed.
- Open Access
- 1 October 2017
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 24 (5) , 1449-1456
Innovation of parameter αcc for design resistance of high-strength concrete columns
Uporaba betona visoke čvrstoće znatno je porasla u posljednjih nekoliko decenija. Povećanjem tlačne čvrstoća betona, naponsko-deformacijska svojstva betona se mijenjaju. U suvremenim tehničkim propisima predlažu se posebne...
- 1 October 2017
- Published by University of Slavonski Brod in Tehnicki vjesnik - Technical Gazette
- Vol. 24 (5) , 1449-1456
Open AccessInnovation of parameter αcc for design resistance of high-strength concrete columns
Uporaba betona visoke čvrstoće znatno je porasla u posljednjih nekoliko decenija. Povećanjem tlačne čvrstoća betona, naponsko-deformacijska svojstva betona se mijenjaju. U suvremenim tehničkim propisima predlažu se posebne...
- Open Access
- 1 January 2015
- Published by Elsevier in Procedia Engineering
- Vol. 117, 628-636
Definition of Thermal Actions on the Building in Accordance with the Standard EN 1991-1-5
- 1 January 2015
- Published by Elsevier in Procedia Engineering
- Vol. 117, 628-636
Open AccessDefinition of Thermal Actions on the Building in Accordance with the Standard EN 1991-1-5
- Open Access
- 1 January 2015
- Published by Elsevier in Procedia Engineering
- Vol. 117, 865-873
The Mechanical Properties of Masonry Walls - Analysis of the Test Results
- 1 January 2015
- Published by Elsevier in Procedia Engineering
- Vol. 117, 865-873
Open AccessThe Mechanical Properties of Masonry Walls - Analysis of the Test Results
- Open Access
- 1 January 2015
- Published by Elsevier in Procedia Engineering
- Vol. 117, 487-494
Shear Strength of High Strength Concrete Beams Loaded Close to the Support
- 1 January 2015
- Published by Elsevier in Procedia Engineering
- Vol. 117, 487-494
Open AccessShear Strength of High Strength Concrete Beams Loaded Close to the Support