RRRodney W. Rudd

Rodney W. Rudd

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Rodney W. Rudd has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • BioTab—A New Method for Analyzing and Documenting Injury Causation in Motor-Vehicle Crashes

    by Lawrence W. Schneider, Jonathan D. Rupp, Mark Scarboro, Frank Pintar, Kristy B. Arbogast, Rodney W. Rudd, Mark R. Sochor, Joel Stitzel, Chris Sherwood, Joel B. MacWilliams, et al.

    Objective: To describe a new method for analyzing and documenting the causes of injuries in motor vehicle crashes that has been implemented since 2005 in cases investigated by the Crash Injury Research Engineering Network (CIREN). Methods: The new method, called BioTab, documents injury causation using evidence from in-depth crash investigations. BioTab focuses on developing injury causation scenarios (ICSs) that document all factors considered essential for an injury to have occurred as well as factors that contributed to the likelihood and/or severity of an injury. The elements of an injury causation scenario are (1) the source of the energy that caused the injury, (2) involved physical components (IPCs) contacted by the occupant that are considered necessary for the injury to have occurred, (3) the body region or regions contacted by each IPC, (4) the internal paths between body regions contacted by IPCs and the injured body region, (5) critical intrusions of vehicle components, and (6) factors that contributed to the likelihood and/or the severity of injury. Results: Advantages of the BioTab method are that it


  • Pedestrian Lower Extremity Response and Injury: A Small Sedan vs. A Large Sport Utility Vehicle

    by Jason Kerrigan, Damien Subit, Costin Untaroiu, Jeff Crandall, Rodney Rudd

    Vehicle front-end geometry and stiffness characteristics have been shown to influence pedestrian lower extremity response and injury patterns. The goal of this study is to compare the lower extremity response and injuries of post mortem human surrogates (PMHS) tested in full-scale vehicle-pedestrian impact experiments with a small sedan and a large sport utility vehicle (SUV). The pelves and lower limbs of six PMHS were instrumented with six-degree-of-freedom instrumentation packages. The PMHS were then positioned laterally in mid-stance gait and subjected to vehicle impact at 40 km/h with either a small sedan (n=3) or a large SUV (n=3). Detailed descriptions of the pelvic and lower extremity injuries are presented in conjunction with global and local kinematics data and high speed video images. Injured PMHS knee joints reached peak lateral bending angles between 25 and 85 degrees (exceeding published injury criteria) at bending rates between 1.1 deg/ms and 3.7 deg/ms. In one case, the onset of tibia and fibula fracture may have prevented ipsilateral knee joint injury. Overall, the SUV appeared to be more aggressive than the sedan in causing injuries to the lower extremities and the pelvis of the tested PMHS.


  • The line of action in the tibia during axial compression of the leg

    by James R. Funk, Rodney W. Rudd, Jason R. Kerrigan, Jeff R. Crandall


  • Development of Injury Criteria for Pelvic Fracture in Frontal Crashes

    by Robert S. Salzar, Cameron R. “Dale” Bass, Richard Kent, Steven Millington, Martin Davis, Scott Lucas, Rodney Rudd, Benny Folk, Lucy Donnellan, Daisuke Murakami, et al.

    Objective. This article assesses the position-dependent injury tolerance of the hip in the frontal direction based on testing of eight postmortem human subjects. Methods. For each subject, the left and right hemipelvis complex was axially loaded using a previously developed test configuration. Six positions were defined from a seated femur neutral condition, combining flexed, neutral, and extended femur positions with abducted, neutral, and adducted positions. Results. Axial injury tolerances based on peak force were found to be 6,850 ± 840 N in the extended, neutral position and 4,080 ± 830 N in the flexed, neutral position. From the flexed neutral orientation, the peak axial force increased 18% for 20° abduction and decreased 6% for 20° adduction. From the extended, neutral orientation, the peak axial force decreased 4% for 20° abduction and decreased 3% for 20° adduction. However, as there is evidence that increases in loading may occur after the initiation of fracture, the magnitude of the peak force is likely related to the extent of injury, not to the initial tolerance. Using the axial femur force at the initiation of fracture (assessed with acoustic crack sensors) as a potentially more relevant indicator of injury may lower the existing injury criteria. This fracture initiation force varied by position from 3,010 ± 560 N in the flexed, neutral position to 5,470 N in the extended, abducted position. Further, there was a large position-dependent variation in the ratio of fracture initiation force to the peak axial force. The initiation of fracture was 83% of the peak axial force in the extended, abducted position, but the ratio was 34% in the extended, adducted position. Conclusions. This may have significant implications for the development of pelvic injury criteria by automobile designers attempting to mitigate pelvis injuries.


  • Kinematic Analysis of Head/Neck Motion in Pedestrian-Vehicle Collisions Using 6-Degree-of-Freedom Instrumentation Cubes

    by Rodney Rudd, Jason Kerrigan, Jeff Crandall, Carlos Arregui

    Given the quantity and severity of head injuries to pedestrians in vehicle-to-pedestrian collisions, human pedestrian finite element models and pedestrian dummies must possess a biofidelic head/neck response to accurately reproduce head-strike kinematics and kinetics. Full-scale pedestrian impact experiments were performed on post-mortem human surrogates (PMHS) using a mid-sized sport utility vehicle and a small sedan. Kinematics of the head and torso were obtained with a six-degree-of-freedom (6DOF) cube, which contained three orthogonally mounted linear accelerometers and three angular rate sensors. The goal of the current study was to present a methodology for analyzing the data obtained from the sensors on each cube, and to use the kinematics data to calculate spatial trajectories, as well as linear velocities and angular accelerations of the head and T1 vertebra. The analysis procedures were checked by computing kinematics for artificial input motions and by comparing planar pedestrian trajectories with those obtained from video analysis. The results of this study will serve as the basis for future pedestrian model and dummy neck evaluations.


  • The Effect of Tibial Curvature and Fibular Loading on the Tibia Index

    by James R. Funk, Rodney W. Rudd, Jason R. Kerrigan, Jeff R. Crandall

    The tibia index (TI) is commonly used to predict leg injury based on measurements taken by an anthropomorphic test device (ATD). The TI consists of an interaction formula that combines axial loading and bending plus a supplemental compressive force criterion. Current ATD lower limbs lack geometric biofidelity with regard to tibial curvature and fibular load-sharing. Due to differences in tibial curvature, the midshaft moments induced by axial loading are different in humans and ATDs. Midshaft tibial loading in the human is also reduced by load-sharing through the fibula, which is not replicated in current ATDs. In this study, tibial curvature and fibular load-sharing are quantified through CT imaging and biomechanical testing, and equations are presented to correct ATD measurements to reflect the loading that would be experienced by a human tibia.


  • Small female head and neck interaction with a deploying side airbag

    by Stefan M. Duma, Jeff R. Crandall, Rodney W. Rudd, Richard W. Kent


  • Response of the Thor-Lx and Hybrid III Lower Extremities in Frontal Sled Tests

    by Rodney W. Rudd, Jeff R. Crandall, Greg Shaw

    The objectives of this study were to evaluate and compare the responses, repeatability, and durability of the Thor-Lx/HIIIr and Hybrid III/Denton lower extremities in frontal sled tests. Effectiveness of the two limb types was studied by evaluating responses in different test configurations using existing and proposed Injury Assessment Reference Values (IARVs) for both leg designs. Hybrid III or Thor-Lx legs were attached to the distal femurs of a 50th percentile male Hybrid III dummy, which was subjected to three series of 56 km/h frontal sled tests with and without toepan intrusion. Due to the design differences, many of the absolute response values were different between the Hybrid III and Thor-Lx legs. The expanded measurement capabilities, modified geometry and refined responses of the Thor-Lx limbs provide a more thorough and conservative judgment of injury risk. The Thor-Lx legs produced repeatable results throughout this series of tests and demonstrated sufficient durability under the severe loading conditions.


  • Comparative Evaluation of Dummy Response with Thor-Lx/HIIIr and Hybrid III Lower Extremities

    by Greg Shaw, Rodney W. Rudd, Jeff R. Crandall, Fayun Luo

    Multiple series of frontal sled tests were performed to evaluate the new Thor-Lx/HIIIr lower extremity developed by the National Highway Traffic Safety Administration for retrofit use on the 50th percentile male Hybrid III. This study's objective was to compare the Thor-Lx/HIIIr to the existing Hybrid III dummy leg (HIII) from the standpoint of repeatability and effects on femur and upper body response values.\ The test-to-test repeatability of the dummy responses, as measured by the coefficient of variation (CV), was generally acceptable (CV < 10%) for all of the test conditions for both legs. Overall, tests with the Thor-Lx/HIIIr legs produced upper body movement and injury criteria values for the head and chest that were acceptably consistent and were generally indistinguishable from those produced with the HIII leg. Low right femur loads, which ranged from 4 to 25 percent of the injury assessment reference value, varied substantially test-to-test for tests with both types of legs. Higher right femur loads in tests with the HIII legs were attributed to differences in leg construction and geometry.


  • Methodology for Measuring Tibial and Fibular Loads in a Cadaver

    by James R. Funk, Rodney W. Rudd, Sreebala C. M. Srinivasan, Richard J. King, Jeff R. Crandall, Philippe Y. Petit

    Crash test dummies rely on biomechanical data from cadaver studies to biofidelically reproduce loading and predict injury. Unfortunately, it is difficult to obtain equivalent measurements of leg loading in a dummy and a cadaver, particularly for bending moments. A methodology is presented here to implant load cells in the tibia and fibula while minimally altering the functional anatomy of the two bones. The location and orientation of the load cells can be measured in all six degrees of freedom from post-test radiographs. Equations are given to transform tibial and fibular load cell measurements from a cadaver or dummy to a common leg coordinate frame so that test data can be meaningfully compared.