Caroline Portilho Trentini
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Caroline Portilho Trentini has a total of 38 co-authors. Here are the top co-authors by number of shared publications:
- Edson Antonio da Silva
Departamento de Tecnologia, Centro de Tecnologia, Universidade Estadual de Maringá, Av. Ângelo Moreira da Fonseca 1800, Umuarama 87506-370, PR, Brazil
7 shared publications Camila da Silva
5 shared publications- Lúcio Cardozo-Filho
Department of Chemical Engineering, State University of Maringá (UEM), Maringá 87020-900, PR, Brazil
4 shared publications - Vitor Augusto dos Santos Garcia
Departamento de Produção Vegetal, Faculdade de Ciências Agronômicas, Universidade Estadual Paulista “Júlio de Mesquita Filho”, Botucatu 18610-034, SP, Brazil
3 shared publications - Adriana Aparecida Sinópolis Gigliolli
Universidade Estadual de Maringá
1 shared publication Ana Carolina de Araujo Abdala
Program of Post-Graduation in Bioenergy, West Paraná State University, Faculdade Street 645, Jardim La Salle, 85903-000 Toledo, PR, Brazil
1 shared publication
Latest Publications
- Open Access
- 27 November 2022
- Published by Research, Society and Development in Research, Society and Development
- Vol. 11 (16)
Utilização de glicerol como substrato na produção de biossurfactante
Surfactants have surface active properties and micelle formation, they are molecular compounds with hydrophobic and hydrophilic portions, acting to reduce surface/interfacial tensions. In this context, glycerol, which is a waste generated in large quantities due to the increasing production of biodiesel worldwide, can be used as a substrate in the production of biosurfactants. Therefore, this work had as scope to perform a literature review on the use of glycerol, co-product of biodiesel synthesis, as substrate in the production of biosurfactants from Bacillus subtilis. The present research gathered from the qualitative analysis of bibliographic data related to the production of biosurfactants, factors that influence it, especially, of application in the environmental area. From the evaluation of published works in the area of interest, the bibliographic survey showed that glycerol is a promising carbon source in the production of biosurfactant, standing out when compared to other alternative sources. As well, the surfactant synthesized by B. subtilis, showed similarity with commercial surfactin, and potential in environmental bioremediation process, such as soil and water contaminated by hydrocarbons, heavy metals and oily compounds.
- 27 November 2022
- Published by Research, Society and Development in Research, Society and Development
- Vol. 11 (16)
Open AccessUtilização de glicerol como substrato na produção de biossurfactante
Surfactants have surface active properties and micelle formation, they are molecular compounds with hydrophobic and hydrophilic portions, acting to reduce surface/interfacial tensions. In this context, glycerol, which is a waste generated in large quantities due to the increasing production of biodiesel worldwide, can be used as a substrate in the production of biosurfactants. Therefore, this work had as scope to perform a literature review on the use of glycerol, co-product of biodiesel synthesis, as substrate in the production of biosurfactants from Bacillus subtilis. The present research gathered from the qualitative analysis of bibliographic data related to the production of biosurfactants, factors that influence it, especially, of application in the environmental area. From the evaluation of published works in the area of interest, the bibliographic survey showed that glycerol is a promising carbon source in the production of biosurfactant, standing out when compared to other alternative sources. As well, the surfactant synthesized by B. subtilis, showed similarity with commercial surfactin, and potential in environmental bioremediation process, such as soil and water contaminated by hydrocarbons, heavy metals and oily compounds.
- Open Access
- 3 March 2021
- Published by Editorial CSIC in Grasas y Aceites
- Vol. 72 (1) , e398
Catalyst-free production of fatty acid ethyl esters (FAEE) from macauba pulp oil
In this study, the production of fatty acid ethyl esters (FAEE) from macauba pulp oil and pressurized ethanol was investigated. The experiments were conducted without the addition of catalyst, at 20 MPa, to determine the effect of temperature (200 to 300 °C) and the oil to ethanol mass ratio (1:1 and 1:2) on the FAEE content and different residence times (10 to 45 min). The effect of the addition of n-hexane to the oil (20 wt%) as a co-solvent was also evaluated. The use of high temperatures (275 and 300 °C) resulted in high FAEE content (∼90%). Increasing the amount of ethanol in the reaction medium contributed to the formation of esters only at operating temperatures of 200 to 250 °C. It was also observed that with the addition of co-solvent (in the oil) it was possible to obtain high amounts of FAEE in a shorter reaction time. In addition, a low content of unreacted compounds (∼8.0%) and the conversion of ∼90 and 99% of the free fatty acids and triglycerides were observed, respectively.
- 3 March 2021
- Published by Editorial CSIC in Grasas y Aceites
- Vol. 72 (1) , e398
Open AccessCatalyst-free production of fatty acid ethyl esters (FAEE) from macauba pulp oil
In this study, the production of fatty acid ethyl esters (FAEE) from macauba pulp oil and pressurized ethanol was investigated. The experiments were conducted without the addition of catalyst, at 20 MPa, to determine the effect of temperature (200 to 300 °C) and the oil to ethanol mass ratio (1:1 and 1:2) on the FAEE content and different residence times (10 to 45 min). The effect of the addition of n-hexane to the oil (20 wt%) as a co-solvent was also evaluated. The use of high temperatures (275 and 300 °C) resulted in high FAEE content (∼90%). Increasing the amount of ethanol in the reaction medium contributed to the formation of esters only at operating temperatures of 200 to 250 °C. It was also observed that with the addition of co-solvent (in the oil) it was possible to obtain high amounts of FAEE in a shorter reaction time. In addition, a low content of unreacted compounds (∼8.0%) and the conversion of ∼90 and 99% of the free fatty acids and triglycerides were observed, respectively.
- 1 May 2019
- Published by Elsevier in Energy Conversion and Management
- Vol. 187, 398-406
Continuous catalyst-free interesterification of crambe oil using methyl acetate under pressurized conditions
- 1 May 2019
- Published by Elsevier in Energy Conversion and Management
- Vol. 187, 398-406
Continuous catalyst-free interesterification of crambe oil using methyl acetate under pressurized conditions
- 1 October 2018
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 140, 238-247
Esters production in continuous reactor from macauba pulp oil using methyl acetate in pressurized conditions
- 1 October 2018
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 140, 238-247
Esters production in continuous reactor from macauba pulp oil using methyl acetate in pressurized conditions
- 1 June 2018
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 136, 157-163
Assessment of continuous catalyst-free production of ethyl esters from grease trap waste
- 1 June 2018
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 136, 157-163
Assessment of continuous catalyst-free production of ethyl esters from grease trap waste
- 29 May 2018
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 97 (3) , 785-792
Extraction of macauba kernel oil using supercritical carbon dioxide and compressed propane
Macauba kernel oil (MKO) was extracted using supercritical CO2 and compressed propane as the solvent. The influence of temperature (313–353 K for CO2 and 303–333 K for propane) and pressure (18–22 MPa for CO2 and 8–12 MPa for propane) on oil yield was investigated, and the results were compared with conventional extraction. A characterization of oil and defatted meal was performed. Temperature and pressure, in the evaluated range, influenced oil yield with the use of CO2. For propane, the oil yield was not influenced by the experimental conditions. In the evaluated experimental range, the use of propane and CO2 provided 100 % and ∼93 % oil yield compared to conventional extraction, respectively. MKO showed a predominance of saturated fatty acids, among which lauric acid was the major constituent. CO2 presented greater efficiency in the removal of phytosteroids and tocopherols from the macauba kernel, however, the oil extracted with propane presented longer oxidative stability. Defatted meals presented modified physico‐chemical composition and potentiated technological characteristics due to oil removal.
- 29 May 2018
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 97 (3) , 785-792
Extraction of macauba kernel oil using supercritical carbon dioxide and compressed propane
Macauba kernel oil (MKO) was extracted using supercritical CO2 and compressed propane as the solvent. The influence of temperature (313–353 K for CO2 and 303–333 K for propane) and pressure (18–22 MPa for CO2 and 8–12 MPa for propane) on oil yield was investigated, and the results were compared with conventional extraction. A characterization of oil and defatted meal was performed. Temperature and pressure, in the evaluated range, influenced oil yield with the use of CO2. For propane, the oil yield was not influenced by the experimental conditions. In the evaluated experimental range, the use of propane and CO2 provided 100 % and ∼93 % oil yield compared to conventional extraction, respectively. MKO showed a predominance of saturated fatty acids, among which lauric acid was the major constituent. CO2 presented greater efficiency in the removal of phytosteroids and tocopherols from the macauba kernel, however, the oil extracted with propane presented longer oxidative stability. Defatted meals presented modified physico‐chemical composition and potentiated technological characteristics due to oil removal.
- 1 August 2017
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 126, 72-78
Oil extraction from macauba pulp using compressed propane
- 1 August 2017
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 126, 72-78
Oil extraction from macauba pulp using compressed propane
- Open Access
- 1 July 2017
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 34 (3) , 831-839
Assessment of process variables on the use of macauba pulp oil as feedstock for the continuous production of ethyl esters under pressurized conditions
This study evaluated the potential of macauba pulp oil (MPO) as a feedstock for continuous ester production using ethanol under pressurized conditions. Experiments were performed in order to obtain data for the effect of process variables on ethyl ester (FAEE) and free fatty acid (FFA) conversion in a catalyst-free process. From the results, it appears that the MPO to ethanol mass ratio and the pressure were the variables with more favorable effect on the evaluated response variables. The addition of n-hexane caused an increase in the production of esters; however, this had a negative effect on FFA conversion. The addition of water was unfavorable for oil processing with high acidity. In this process, esterification and transesterification occur simultaneously, and the high FFA content in MPO provides high yields (85 wt% of esters; 93% FFA conversion) at low temperature, since the esterification reaction rate is higher than the transesterification. The decomposition of fatty acids was evaluated and levels <5% were observed under the evaluated experimental conditions.
- 1 July 2017
- Published by FapUNIFESP (SciELO) in Brazilian Journal of Chemical Engineering
- Vol. 34 (3) , 831-839
Open AccessAssessment of process variables on the use of macauba pulp oil as feedstock for the continuous production of ethyl esters under pressurized conditions
This study evaluated the potential of macauba pulp oil (MPO) as a feedstock for continuous ester production using ethanol under pressurized conditions. Experiments were performed in order to obtain data for the effect of process variables on ethyl ester (FAEE) and free fatty acid (FFA) conversion in a catalyst-free process. From the results, it appears that the MPO to ethanol mass ratio and the pressure were the variables with more favorable effect on the evaluated response variables. The addition of n-hexane caused an increase in the production of esters; however, this had a negative effect on FFA conversion. The addition of water was unfavorable for oil processing with high acidity. In this process, esterification and transesterification occur simultaneously, and the high FFA content in MPO provides high yields (85 wt% of esters; 93% FFA conversion) at low temperature, since the esterification reaction rate is higher than the transesterification. The decomposition of fatty acids was evaluated and levels <5% were observed under the evaluated experimental conditions.
- 21 January 2017
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 95 (8) , 1579-1584
Pressurized liquid extraction of macauba pulp oil
- 21 January 2017
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 95 (8) , 1579-1584
Pressurized liquid extraction of macauba pulp oil
- Open Access
- 8 January 2016
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 46 (4) , 725-731
Low-pressure solvent extraction of oil from macauba (Acrocomia aculeata) pulp: characterization of oil and defatted meal
This study aimed to extract the oil from macauba pulp using a low-pressure solvent extraction, as well as characterisation of the extracts and defatted meal obtained using different solvents (n-hexane, ethyl acetate and isopropanol). Results reported higher yields in oil, 27.43%, using isopropanol (P0.05) on the composition; however, in the quantification of free glycerol compounds, isopropanol showed higher levels, 104.15mg 100g-1, of these compounds (P<0.05). Meals had higher ash, protein and fibre content when compared to pulp. Thus, oil removal can be stated to promote water retention capacity; however, it has no influence on the other technological characteristics evaluated.
- 8 January 2016
- Published by FapUNIFESP (SciELO) in Ciência Rural
- Vol. 46 (4) , 725-731
Open AccessLow-pressure solvent extraction of oil from macauba (Acrocomia aculeata) pulp: characterization of oil and defatted meal
This study aimed to extract the oil from macauba pulp using a low-pressure solvent extraction, as well as characterisation of the extracts and defatted meal obtained using different solvents (n-hexane, ethyl acetate and isopropanol). Results reported higher yields in oil, 27.43%, using isopropanol (P0.05) on the composition; however, in the quantification of free glycerol compounds, isopropanol showed higher levels, 104.15mg 100g-1, of these compounds (P<0.05). Meals had higher ash, protein and fibre content when compared to pulp. Thus, oil removal can be stated to promote water retention capacity; however, it has no influence on the other technological characteristics evaluated.