GRGustavo Simão Rodrigues

Gustavo Simão Rodrigues

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Gustavo Simão Rodrigues has a total of 86 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Mechanical integration analysis of 70-mm rocket launchers in remotely piloted aircraft

    by Matheus A. Marins, Lucas E. R. Uchoa, André L. T. Rezende, Elias D. R. Lopes, Gustavo S. Rodrigues, Daniel H. B. de Sousa

    The effort of armed forces worldwide to acquire high-tech equipment is becoming increasingly necessary with the ongoing technological advancement. Therefore, this work aims to technically evaluate the possibilities of the mechanical integration of a Skyfire rocket launcher from Avibras into a Remotely Piloted Aircraft System (RPAS), considering all the challenges of the process. First, an analysis of available aircraft in Brazil and around the world was conducted to select a system that had sufficient infrastructure for the launcher to be integrated. Next, three-dimensional (3D) modeling of the aircraft components and the weapon system was performed, so that it was possible to use this geometry in the simulations. In addition, several computational fluid dynamics (CFD) simulations were carried out in Ansys software to calculate the lift and drag coefficient parameters of the airflow over the aircraft wing, and graphs of the pressure and velocity contours on the wing were obtained. The simulations are crucial for comparing the lift and drag forces on the aircraft wing before and after the integration of the weapon system.

  • Open Access

    Knowledge-Based Fuzzy Control System for Automatic Transmission with Human-Sensitive Inputs

    by Igor Lucas Reinaldo, Elias Dias Rossi Lopes, Gustavo Simão Rodrigues, Ricardo Teixeira da Costa Neto

    With the increasing use of automatic transmissions in passenger vehicles, there is a growing need for improved gear shifting control strategies that aim to enhance performance and fuel efficiency. This paper introduces a knowledge-based fuzzy control system designed specifically for automatic transmissions in light vehicles. The proposed system utilizes a fuzzy inference system as the controller, enabling the emulation of the driver’s perceptions during the gear shifting process. Consequently, the input signal consists of variables that are either sensitive to or observable by the driver, while the output represents the selected gear. The paper evaluates three distinct control strategies, each based on different inputs. These inputs include the longitudinal velocity of the vehicle, the angular velocity of the engine, or a combination of both, along with the time-derivative of the throttle valve opening. Through the evaluation, it is observed that the combination of inputs yields significantly improved performance. Therefore, the methodology presented in this paper demonstrates that the combined input approach is more effective for gear shifting control.

  • Cascade Control for Path Tracking of Autonomous Robotic Vehicles

    by Vinícius Macedo, Marcelo Alejandro Forte, Gustavo Simão Rodrigues, Elias Dias Rossi Lopes

  • Optimization of vehicle suspension parameters based on ride comfort and stability requirements

    by Ryan Rodrigues Moreira Resende da Silva, Igor Lucas Reinaldo, Daniel Pinheiro Montenegro, Gustavo Simão Rodrigues, Elias Dias Rossi Lopes

    The use of optimization methods in engineering is growing, allowing the best possible way to fulfill the requirements of the project. For vehicle suspensions, there are various conditions, which involve comfort, safety, stability, maneuverability, among others. A safety and stability evaluation is carried out by several tests, including Double Lane Change. In this maneuver, the vehicle must change lanes quickly twice, allowing it to be assessed for stability in sudden movements. For ride comfort, it is common for the design to be based on the vehicle’s natural vibration frequencies. In this context, this work aims to present a methodology for optimizing the suspension parameters of a vehicle, based on the natural frequencies of vibration and the simulation of a Double Lane Change maneuver. For that, it is employed vertical and lateral dynamics mathematical models, with hypotheses that allow the adequate adaptation to the represented phenomena. Finally, Particle Swarm Optimization (PSO) is used, which is a stochastic algorithm, based on nature. It has low computational cost, with reasonable results, allowing the parameters to be estimated and comprising the two objectives simultaneously.


  • Multibody modeling and optimization of a dynamic vehicle suspension system

    by Jefferson Gomes de Carvalho Souza, Elias Dias Rossi Lopes, Gustavo Simão Rodrigues, Taís Gomes de Carvalho Souza

  • Methodology for analysis of heavy vehicle trafficability in deformable soils

    by Elias Dias Rossi Lopes, André Flora Alves Pinto, Moisés Xavier Guimarães Valentim, Pedro Siciliano Peixoto, Gustavo Simão Rodrigues, Ricardo Teixeira da Costa Neto

    Heavy vehicles have a wide range of applicability in our daily lives: buses, commercial trucks, and even defense vehicles are important to transport people and goods and provide protection. However, this field is not widely covered by the scientific literature in many aspects regarding their dynamic behavior, as most works tend to focus on personal vehicles (cars). This article elaborates on heavy vehicle trafficability on many different terrains or their capacity to operate in those soils, using an analysis based on the Wong–Reece method with deformable soil–rigid tire approximation. It also develops a dynamic model, using MATLAB SimulinkTM software, to show how heavy vehicle performance both kinematically and dynamically is influenced by the soil. To test both models, a numerical case study was conducted, using common parameters for wheeled heavy vehicles as inputs for the dynamic. Results indicate that heavy vehicles are often incapable of operating in highly deformable soils, sinking deeply into the ground; the soil also affects heavily the vehicle maximum velocity and gear from almost [ ] km/h in Greenville Loam soil to less than [ ] km/h in Upland Sandy Loam soil.


  • Modeling and dynamic analysis of a 6 x 6 heavy military truck by adaptive model predictive control with application to NATO lane change test course

    by Marcelo Andrés Acuña, Gustavo Simão Rodrigues, Rafael Vitor Guerra Queiroz, Elias Dias Rossi Lopes

    In this paper, the computer-aided vehicle dynamic analysis of a 6x6 heavy military truck is presented and examined. For the analysis, a MATLAB/Simulink® platform is used to design and model a truck. The vehicle configuration taken into account for the analysis is the powertrain (engine, gear box, transfer gear, differential), suspension, steering system and tire model according to the Pacekja 89’ formulation. In addition, the effect of the rolling resistance and drag is considered, in order to represent the vehicle behavior as real as possible. The longitudinal dynamic and lateral dynamic are formulated. First, the longitudinal dynamic model is established by means of implementation of the weight transfer function. The vehicles are considered as rigid bodies with 1 degree of freedom. Second, the vehicular planar model with three wheels, well known as bicycle model, is applied following the North Atlantic Treaty Organization double line change maneuver test reaching 3 degree of freedom. The driver behavior is represented by using an adaptive model predictive control varying the longitudinal velocity. The forces for braking, inertia of the rotating components, the energy lost in the powertrain, and the effect of dive squat and rollover. The numerical simulation results are shown and compared with a full-vehicle model formed by using Mechanical Simulation Corporation’s truckSIM®. There were chosen simulation scenarios applied to the model to observe the effects of different parameters concerning the dynamic behavior, and also prepared in truckSIM® environment. The main contributions of this article are the development of the vehicular model, through the use of block diagrams in a reliable and relatively simple programming code such as MATLAB/Simulink®, with innovative tools used in the control of autonomous vehicle driving and the flexibility to adapt said model to different environmental conditions and different vehicle parameters.


  • ESTIMATION OF PARAMETERS OF THE TORQUE CONVERTER OF AN AUTOMATIC TRANSMISSION OF A PASSENGER VEHICLE

    by Elias Dias Rossi Lopes, André Flora Alves Pinto, Caio César Do Prado Dorea Reis, Alan Baio Bonel, Alexandre Luiz Amarante Mesquita, Andre Luis Rodrigues Mathias, Bernard Carvalho Bernardes, Carlos Andres Millan Paramo, Christiane Lima Barbosa, Diego Ribeiro Pinto de Castro, et al.

    Em “Pesquisa Científica e Inovação Tecnológica nas Engenharias 3” temos treze capítulos que trazem preciosas contribuições para a inovação tecnológica nas engenharias. Pesquisas na área de gestão de resíduos, produção de energia limpa, cuidados com o ambiente em que vivemos demonstram que os pesquisadores estão preocupados com a inovação, mas respeitando os recursos naturais. Na mesma linha, pesquisas na área de logística e mecânica demonstram preocupação com o bem-estar da sociedade sem renunciar aos benefícios proporcionados pela tecnologia. Benefícios presentes ainda na otimização de custos em construção e na utilização de tecnologias de informação móveis. Esperamos que esta obra seja útil ao progresso da ciência e possa melhorar as pesquisas na área. Boa leitura! Franciele Braga Machado Túllio Lucio Mauro Braga Machado

  • Open Access

    Otimização de Parâmetros da Suspensão com base em Requisitos de Conforto e Estabilidade

    by Elias Dias, Rossi Lopes¹, Igor Lucas Reinaldo¹, Ryan Rodrigues, Moreira Resende Da Silva¹, Daniel Pinheiro Montenegro¹, Gustavo Simão Rodrigues

    RESUMO O emprego de métodos de otimização em engenharia é crescente, por permitir que se atenda da melhor maneira possível aos requisitos de projeto. Para suspensões veiculares, há condicionantes variadas, que envolvem conforto, segurança, estabilidade, manobrabilidade, entre outros.

  • Comparison between 6x6 and 6x4 vehicle behavior in steady-state cornering

    by Gustavo Simão Rodrigues, Marcelo Andrés Acuña, Rafael Vitor Guerra Queiroz Queiroz, Ricardo Teixeira DA Costa Neto