DCDong-Wan Cho

Dong-Wan Cho

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dong-Wan Cho has a total of 147 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Fundamental Study on Soil-Based Carbon Dioxide Removal Using Amine-Functionalized Modified Red Mud

    by Dong-Wan Cho, Hui-Yeon Kim, Hyeopjo Han, Giljae Yim

    This study is positioned as a foundational, soil-based carbon capture and carbon dioxide removal (CDR) investigation, aiming to establish fundamental design principles for mineral- and soil-derived CO₂ sorbents rather than immediate industrial deployment. Soil and soil-like materials play a central role in long-term carbon sequestration strategies due to their abundance, stability, and compatibility with land-based CDR systems. In this context, red mud (RM), an industrial by-product of alumina production via the Bayer process, was selected as a representative mineral-rich, soil-analog material to explore its potential as a functional platform for CO₂ capture.Globally, RM is generated at a scale of approximately 300 million tons per year, yet its reuse rate remains below 3%. Its disposal poses serious environmental concerns because of its high alkalinity, salinity, and fine particle size—characteristics that also resemble extreme or degraded soil conditions. From a soil-based CDR perspective, these properties make RM a valuable model system for investigating how mineral composition, pore structure, and surface chemistry influence CO₂ sorption behavior. Thus, this work focuses on transforming RM from an environmentally problematic residue into a functionalized, soil-like carbon capture medium.To enable its application in soil-based carbon capture research, RM was structurally modified through acid digestion, alkali reprecipitation, and calcination. This treatment generated a mesoporous framework and increased the BET surface area from 17.47 to 140.05 m²/g, mimicking the hierarchical pore structures found in reactive mineral soils. The modified RM (ARM) therefore serves as a controlled mineral matrix for systematically studying the interaction between nitrogen-containing functional groups and CO₂.Amine- and guanidine-functionalized sorbents were prepared by wet impregnation using polyethylenimine (PEI), triethylenetetramine (TETA), and 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD). Rather than focusing solely on maximizing adsorption capacity, this study emphasizes understanding how different nitrogen functionalities behave when immobilized on soil-like mineral surfaces. FT-IR spectroscopy, thermogravimetric analysis, and elemental analysis confirmed the successful anchoring of these functional groups, providing a reliable platform for mechanistic investigation.CO₂ adsorption experiments were conducted in a fixed-bed reactor under mild conditions representative of ambient or near-surface environments relevant to soil-based CDR. Among the tested materials, ARM–TETA exhibited the highest CO₂ adsorption capacity (36.90 mg/g), highlighting the importance of molecular flexibility and amine accessibility within mesoporous mineral matrices.Overall, this research serves as a baseline study for soil-based carbon capture, demonstrating how industrial mineral residues can be engineered into model systems for CDR research. The findings provide fundamental insights into pore–functionality relationships and support the broader development of scalable, land-compatible carbon capture materials derived from soil and mineral resources.

  • Open Access

    Geochemical Behavior of Rare Earth Elements and Their Use as Environmental Indicators

    by Hyeop-Jo Han, Jong-Un Lee, Sang-Woo Ji, Dong-Wan Cho, Gil-Jae Yim

    Rare earth elements (REEs) are increasingly being used in cutting-edge technologies, such as electric vehicles, wind turbines, and high-performance electronics, raising concerns over their environment accumulation and ecotoxicity. However, integrated reviews on their geochemical behavior and environmental occurrence remain limited. Geochemical proxies-including cerium (Ce) and europium (Eu) anomalies, light-to-heavy REE ratios (LREE/HREE), and normalized REE distribution patternsoffer potential as metrics for investigating source attribution, particularly for advanced industrial contamination where conventional heavy metal indicators are insufficient. Recently, the incorporation of REEs into positive matrix factorization models has emerged as a new strategy for precisely quantifying source contributions from both traditional and advanced industries. In this article, the geochemical behavior of REEs and their speciation in soils and sediments, fractionation via the sequential extraction method, and applicability as environmental indicators are systematically reviewed, thereby providing a reference framework for advancing REE-based environmental geochemical investigations.

  • Open Access

    Water Quality Changes and Composition of Precipitates during Lime Neutralization of the Drainage from Ilgwang Mine

    by Youngwook Cheong, Giljae Yim, Dong-Wan Cho, Joonhak Lee, Euiyoung Seo

    This study evaluated the changes in water quality and the composition of precipitates when the drainage from Ilgwang Mine was neutralized with lime. The amount of metal hydroxides was theoretically calculated. Neutralization experiments were conducted, followed by water quality analysis, precipitate weight measurement, and X-ray diffraction analysis. Water quality analysis showed that Fe, Al, Mn, Cu, and Zn components were removed at pH 9. Based on a flow rate of 100 m³/d, the amount of metal hydroxides was calculated as 45 kg/d, and the precipitate generation ranged from 70 to 90 kg/d within the neutralization pH range of 7-10. The precipitates were found to include metal precipitates, gypsum, calcite minerals, and some unreacted lime. The precipitate amount measured on-site was 30-40% higher than that observed in the neutralization experiments. The pH operating range of the neutralization reactor is considered to influence the generation of unreacted lime.


  • Open Access

    Geochemical Assessment and Preliminary Source Tracing of Sediment and Water Pollution in Major Korean Rivers

    by Hyeop-Jo Han, Seon Yong Lee, Dong-Wan Cho

    This study assesses sediment and water pollution in major rivers of Korea (Han River, Nakdong River, Geum River, and Yeongsan River) and additional rivers in the Saemangeum and Cheongyang regions. The sources of contamination are traced using geochemical methods. A total of 28 sediment samples and 28 river water samples were collected from six rivers, along with six subsoil samples from non-polluted areas to establish background levels of heavy metals.The river water samples met Korea’s water quality standards, confirming effective management of these rivers. However, sediment analysis revealed varying contamination levels for different elements. Several sediment samples showed Grade II–III contamination (As: 8 samples, Cd: 4 samples, Cr: 5 samples, Cu: 10 samples, Ni: 14 samples, Pb: 9 samples, Zn: 9 samples). Additionally, As (2 samples) and Cd (1 sample) were classified as Grade IV. Upon overall assessment, 3 of the 28 sediment samples were classified as "very poor" and 8 as "poor," confirming contamination in sediments from six river regions.Geochemical indices, such as the enrichment factor (EF) and geo-accumulation index (Igeo), indicated clear contamination levels relative to background concentrations, in line with the results of the pollution assessment. However, Pearson correlation analysis between heavy metal concentrations in water and sediment showed no significant linear correlations for most metals (Cd, Cu, Ni, Pb, Zn).Rare earth element (REE) analysis showed a predominance of light REEs (LREEs) over heavy REEs (HREEs) in all river sediments, consistent with the influence of granitic bedrock in Korea. The highest HREE/LREE ratio was found in ND (Nakdong river) region sediments, suggesting a potential influence from marine environments.Future work will include isotopic analysis (Cu, Pb, Zn) to more precisely trace contamination sources. Integrating geochemical indices, REE distribution patterns, and isotopic ratios is expected to enhance the accuracy of pollution assessment and source tracing.

  • Open Access

    Evaluation of Precipitate Generation Due to Neutralization of Lime in Acid Mine Drainage from Daedeok Coal Mine

    by Youngwook Cheong, Dong-Wan Cho, Dong-Kil Lee, Jeong-Yun Jang, Hunsung Park

    This study aimed to find the cause of the excessive sludge generated at the Daedeok mine drainage treatment plant. A lime neutralization experiment, water quality analysis, and measurement of the precipitate amount were conducted. Geochemical modeling was performed to predict the weight of the precipitate, and Fe-pH-Eh and gypsum-Ca-SO4 diagrams were prepared. When the acid mine drainage (AMD) was oxidized with hydrogen peroxide and neutralized with lime, the major contaminants were removed in the following order: Fet > Al > Mn, as the pH levels increased. Precipitation occurred at pH <5 at 6.4 g/L and at pH 7-8 at 1.9 g/L because the precipitation pH of Fe, Al, and gypsum were concentrated below pH 5. According to the geochemical modeling, Fe, Al, and Mn hydroxides accounted for approximately 30%, while gypsum accounted for approximately 70% of the total precipitate weight at pH 8. The significant sludge deposition in the settling pond was mainly attributed to the generation of gypsum.


  • Open Access

    Carbon dioxide-assisted thermochemical conversion of magnetically harvested harmful algae into syngas and metal biochar

    by Hyeonjung Yu, Jeong-Yun Jang, In-Hyun Nam, Hwanju Jo, Gil-Jae Yim, Hocheol Song, Dong-Wan Cho


  • Open Access

    Evaluation of water quality change and sludge generation according to hydrogen peroxide treatment during lime neutralization

    by YoungWook Cheong, Dong-Wan Cho, Giljae Yim, Jeong-Yun Jang

    This study investigated the effect of hydrogen peroxide treatment on the removal pH for Fe, Al, and Mn and sludge production in the lime neutralization process. In the laboratory, the AMD collected from the coal mine was oxidized with 5% H2O2, and then neutralized to pH 3, 5, 7 and 9, respectively, with 20% lime slurry. In the control experiment, the same neutralization experiment was performed without H2O2 treatment. During the experiment, the supernatant was measured for pH and Eh and analyzed for Fe, Al, Mn, Ca and SO42- ions. Simple neutralization without H2O2 treatment up to pH 8 resulted in almost 100% Fe (<0.3 mg/L), Al (<0.3 mg/L), and Mn (2 mg/L) removal. Neutralization with pre H2O2 treatment also eliminated Fe and Al at pH 6 to the same removal efficiencies and Mn remained at 15 mg/L. The use of lime was 17% less and the weight of sludge was 35% less, and the volume of sludge decreased by 47%. As a result of evaluating the pH-Eh-Fe diagram for hydrogen peroxide/lime neutralization facilities, it was evaluated that Fe could be removed at pH 5-6. It can be concluded that neutralizing up to pH 6 after oxidation effectively minimizes the amount of sludge generated by removing Fe and Al and suppressing gypsum production.

  • Open Access

    Fabrication of PAC sludge-valorized biochars and their practical application to the remediation of methyl arsenic in wetlands

    by Jungho Ryu, Young-Soo Han, Dong-Wan Cho, So-Jeong Kim, Yong-Chan Cho, Chul-Min Chon, Joo Sung Ahn, In-Hyun Nam

    This study aims to mitigate As pollution in wetlands by using biochar composites, which are a byproduct of valorizing drinking water treatment sludge (i.e., polyaluminum chloride (PAC) sludge). PAC sludge produced when PAC is used as a coagulant contains various aluminum and iron components because of the high affinity of PAC for heavy metals. Therefore, the valorization of PAC sludge by pyrolysis can be a strategic method to secure environmental safety for sludge utilization by destroying the organic pollutants and immobilizing heavy metals while simultaneously producing biochar composites that can be used as an environmental adsorbent. Biochar composites were fabricated under N2 and CO2 environments, systematically characterized by X-ray diffraction, thermogravimetric, and Brunauer–Emmett–Teller/Barrett–Joyner–Halenda analyses, and tested for the adsorption of As species. Both biochar composites exhibited excellent adsorption performance for both inorganic As (As(III) and As(V)) and organic As (dimethylarsinic acid, DMA). A lab-scale microcosm test showed that ~30% of spiked DMA was removed by biochar and that the total As fixed in the sediment decreased by ~20%. In addition, the As speciation results for the sediment and biochar revealed demethylation of the DMA and reduction of As(V) to As(III) by microorganisms, which was confirmed by a microbial growth batch test. Finally, a large-scale field experiment carried out in an artificial ecological wetland ensured that the addition of biochar could reduce the total amount of As to be immobilized in wetland sediment by 19%. In addition, the presence of biochar could alter the migration trend of As species in plants by reducing the amount of organic As to be fixed in the sediment. The aforementioned results demonstrate the practical feasibility of using PAC sludge-derived biochar as an adsorbent for As species.

  • Open Access

    Co-thermochemical conversion of coffee grounds and nano Fe(III) oxides to fabricate metal-biochar for the simultaneous removal of Sb(V), Cd(II), and Ni(II) from water

    by Dong-Wan Cho, Jeong-Yun Jang, Youngwook Cheong, Gil-Jae Yim

    Nano Fe(III) oxide (FO) was employed as an additive material for CO2-aided pyrolysis of spent coffee grounds (SCG) and its impacts on the syngas (H2 & CO) generation and biochar adsorption characteristics were examined. Amendment of FO led to 153 and 682% increase of H2 and CO in pyrolytic process of SCG, respectively, which is deemed to arise from enhanced thermal cracking of hydrocarbons and oxygen transfer reaction mediated by FO. Incorporation of FO successfully created porous structure in the produced biochar. The adsorption tests revealed that the biochar exhibited bi-functional capability to remove both positively charged Cd(II) and Ni(II), and negatively charged Sb(V). The adsorption of Cd(II) and Ni(II) was hardly deteriorated in the multiple adsorption cycles, and the adsorption of Sb(V) was further enhanced through formation of surface ternary complexes. The overall results demonstrated nano Fe(III) oxide is a promising amendment material in CO2-aided pyrolysis of lignocellulosic biomass for enhancing syngas generation and producing functional biochar.

  • Open Access

    Feasibility evaluation of utilizing mine tailings as a paste backfill material for mine filling

    by Giljae Yim, Sangwoo Ji, Youngwook Cheong, Dong-Wan Cho

    There are totally 5,396 mines located in South Korea, and 2,033 mines are presently closed or abandoned. According to the current status of mine hazard by mine damage type (2017) of the Korea Mine Rehabilitation and mineral Resources Corporation, mine hazard could be caused by tailings loss in 237 mines. Mining stream/void inside the mines are inevitably formed during resource development, and therefore the appropriate management for the mine stability is continuously needed. Mining filling is regarded as one of the best options since the filling mass acts as a secondary support material that can ensure the stability of the mine void and increase the yielding rate of mining. This study evaluated the suitability of harmless tailings, generated from mine development, as a paste backfill material to secure the stability of mine. The particle size of tailings collected at the tungsten mine used in the study was suitable to be used as a paste backfill materials. The strength of cement solidified using test materials was affected by the content of cement and curing duration of the backfill materials sample. It turned out that above 3.5% the cement content and curing for two weeks were an optimal condition to produce the safe cement. In the Environment Ministry's water pollutant emission acceptance standards (South Korea), the tested backfill materials passed all domestic standards for As, Cd, Cr+6, Pb, Cu, and Hg. The environmental/physical properties of tailings obtained from the results demonstrated that the use the tailings as a paste backfill material to fill the inner space of mines could be considered as a promising option. This evaluation results will contribute to the stabilization of mining enemies and restoration of mine damage in abandoned mine areas through economical and efficient treatment of tailings.