Laurent Blondé
Laurent Blondé has a total of 66 co-authors. Here are the top co-authors by number of shared publications:
Cyril Vienne
Technicolor, Cesson Sévigné, France
6 shared publicationsDidier Doyen
Technicolor Research & Innovation, Cesson-Sévigné, France
6 shared publicationsD. Doyen
Technicolor S.A. (France)
4 shared publications- Pascal Mamassian
Laboratoire des systèmes perceptifs, Département d’études Cognitives, École Normale Supérieure, PSL University, CNRS, Paris, France
4 shared publications Patrick Morvan
Technicolor Research and Innovation Rennes France
4 shared publicationsQ. Huynh-Thu
Technicolor S.A. (France)
3 shared publications
Latest Publications
- Open Access
- 7 May 2023
- Published by Association for Computing Machinery (ACM)
- p. 46-51
Energy-aware images: Quality of Experience vs Energy Reduction
The production, transmission and display of video content requires significant amounts of energy. Whether broadcasting or streaming a video, its display on modern televisions is responsible for a significant proportion of the energy consumption. This paper proposes a framework for analysing and processing video frames that allows a modern screen to use less energy when displaying these frames. The content is analyzed prior to encoding and transmission, generating metadata that is attached to the content. After reception by a display, the metadata is then used along with display parameters and user settings to adapt the content prior to display. Two use cases are discerned: one whereby the energy is reduced as much as possible under the constraint that visual quality is maintained, and another where the highest visual quality is sought under the constraint of a fixed reduction of energy use. These use cases would well serve broadcasting and streaming services, respectively.
- 7 May 2023
- Published by Association for Computing Machinery (ACM)
- p. 46-51
Open AccessEnergy-aware images: Quality of Experience vs Energy Reduction
The production, transmission and display of video content requires significant amounts of energy. Whether broadcasting or streaming a video, its display on modern televisions is responsible for a significant proportion of the energy consumption. This paper proposes a framework for analysing and processing video frames that allows a modern screen to use less energy when displaying these frames. The content is analyzed prior to encoding and transmission, generating metadata that is attached to the content. After reception by a display, the metadata is then used along with display parameters and user settings to adapt the content prior to display. Two use cases are discerned: one whereby the energy is reduced as much as possible under the constraint that visual quality is maintained, and another where the highest visual quality is sought under the constraint of a fixed reduction of energy use. These use cases would well serve broadcasting and streaming services, respectively.
- Open Access
- 14 September 2018
- Published by Optica Publishing Group in Optics Letters
- Vol. 43 (18) , 4501
Near field focusing by edge diffraction: publisher’s note
This publisher’s note corrects an error in the reference section of Opt. Lett. 43, 4053 (2018) [CrossRef] .
- 14 September 2018
- Published by Optica Publishing Group in Optics Letters
- Vol. 43 (18) , 4501
Open AccessNear field focusing by edge diffraction: publisher’s note
This publisher’s note corrects an error in the reference section of Opt. Lett. 43, 4053 (2018) [CrossRef] .
- 15 August 2018
- Published by Optica Publishing Group in Optics Letters
- Vol. 43 (16) , 4053-4056
Near field focusing by edge diffraction
Spherical microparticles have the ability for nonresonant focusing of light in the near field zone, forming nanojet (NJ) beams. Arbitrary-shaped microstructures, with wavelength-scale dimensions, may offer similar functionality with lower fabrication complexity. The focusing properties are ruled by the edge diffraction phenomenon. The diffraction of light on the edge of a dielectric microstructure forms a tilted focused beam whose deviation angle depends on the index ratio between the structure material and host medium. The beam geometry and field intensity enhancement can be tuned by varying the curvature of the edge line. Interference of edge diffracted waves from different segments of the edge line creates a condensed beam in the near field zone, the photonic nanojet.
- 15 August 2018
- Published by Optica Publishing Group in Optics Letters
- Vol. 43 (16) , 4053-4056
Near field focusing by edge diffraction
Spherical microparticles have the ability for nonresonant focusing of light in the near field zone, forming nanojet (NJ) beams. Arbitrary-shaped microstructures, with wavelength-scale dimensions, may offer similar functionality with lower fabrication complexity. The focusing properties are ruled by the edge diffraction phenomenon. The diffraction of light on the edge of a dielectric microstructure forms a tilted focused beam whose deviation angle depends on the index ratio between the structure material and host medium. The beam geometry and field intensity enhancement can be tuned by varying the curvature of the edge line. Interference of edge diffracted waves from different segments of the edge line creates a condensed beam in the near field zone, the photonic nanojet.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 7-12
Camera-agnostic format and processing for light-field data
Light-field (LF) is foreseen as an enabler for the next generation of 3D/AR/VR experiences. However, lack of unified representation, storage and processing formats, variant LF acquisition systems and capture-specific LF processing algorithms prevent cross-platform approaches and constrain the advancement and standardization process of the LF information. In this work we present our vision for camera-agnostic format and processing of LF data, aiming at a common ground for LF data storage, communication and processing. As a proof-of-concept for camera-agnostic pipeline, we present a new and efficient LF storage format (for 4D rays) and demonstrate feasibility of camera-agnostic LF processing. To do so, we implement a camera-agnostic depth extraction method. We use LF data from a camera-rig acquisition setup and several synthetic inputs including plenoptic and non-plenoptic captures, to emphasize the camera-agnostic nature of the proposed LF storage and processing pipeline.
- 1 July 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 7-12
Camera-agnostic format and processing for light-field data
Light-field (LF) is foreseen as an enabler for the next generation of 3D/AR/VR experiences. However, lack of unified representation, storage and processing formats, variant LF acquisition systems and capture-specific LF processing algorithms prevent cross-platform approaches and constrain the advancement and standardization process of the LF information. In this work we present our vision for camera-agnostic format and processing of LF data, aiming at a common ground for LF data storage, communication and processing. As a proof-of-concept for camera-agnostic pipeline, we present a new and efficient LF storage format (for 4D rays) and demonstrate feasibility of camera-agnostic LF processing. To do so, we implement a camera-agnostic depth extraction method. We use LF data from a camera-rig acquisition setup and several synthetic inputs including plenoptic and non-plenoptic captures, to emphasize the camera-agnostic nature of the proposed LF storage and processing pipeline.
- Open Access
- 10 February 2016
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 11 (2) , e0145671
Individual Colorimetric Observer Model
This study proposes a vision model for individual colorimetric observers. The proposed model can be beneficial in many color-critical applications such as color grading and soft proofing to assess ranges of color matches instead of a single average match. We extended the CIE 2006 physiological observer by adding eight additional physiological parameters to model individual color-normal observers. These eight parameters control lens pigment density, macular pigment density, optical densities of L-, M-, and S-cone photopigments, and λmax shifts of L-, M-, and S-cone photopigments. By identifying the variability of each physiological parameter, the model can simulate color matching functions among color-normal populations using Monte Carlo simulation. The variabilities of the eight parameters were identified through two steps. In the first step, extensive reviews of past studies were performed for each of the eight physiological parameters. In the second step, the obtained variabilities were scaled to fit a color matching dataset. The model was validated using three different datasets: traditional color matching, applied color matching, and Rayleigh matches.
- 10 February 2016
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 11 (2) , e0145671
Open AccessIndividual Colorimetric Observer Model
This study proposes a vision model for individual colorimetric observers. The proposed model can be beneficial in many color-critical applications such as color grading and soft proofing to assess ranges of color matches instead of a single average match. We extended the CIE 2006 physiological observer by adding eight additional physiological parameters to model individual color-normal observers. These eight parameters control lens pigment density, macular pigment density, optical densities of L-, M-, and S-cone photopigments, and λmax shifts of L-, M-, and S-cone photopigments. By identifying the variability of each physiological parameter, the model can simulate color matching functions among color-normal populations using Monte Carlo simulation. The variabilities of the eight parameters were identified through two steps. In the first step, extensive reviews of past studies were performed for each of the eight physiological parameters. In the second step, the obtained variabilities were scaled to fit a color matching dataset. The model was validated using three different datasets: traditional color matching, applied color matching, and Rayleigh matches.
- 23 June 2015
- Published by Wiley in Color Research & Application
- Vol. 41 (5) , 530-539
Color matching experiment for highlighting interobserver variability
Human color vision differs from person to person, not only when color deficiencies occur but also within color‐normal populations. Investigating individual variability in normal color vision is beneficial both for clinical purposes and for quantifying observer metamerism. Researchers have used color matches such as Rayleigh matches, Moreland matches, the D&H color rule, and various combinations of different media for such investigations. However, none of them were originally aimed at investigating the interobserver variability in color‐normal populations, but rather were aimed at screening for color‐deficiencies. The objective of this study was, therefore, to design and carry out a color matching experiment where observer variability appeared as large as possible to detect the interobserver differences in the color‐normal population. Color matching was simulated under different combinations of reference spectrum and matching primaries using ColorChecker patches, different display/projector primaries, and the Stiles and Burch 49 observers. The simulation results showed: (1) The choice of spectra for the matching primaries had a significant effect on observer variability, (2) observer variability was large for near‐neutral reference colors, and (3) observer variability in the lightness direction was small relative to chromatic variability. The color matching experiment highlighting interobserver variability was designed based on these three findings and carried out for 61 color‐normal observers. Typical interobserver variability was 9.2 mean color difference from the mean (MCDM) using CIEDE2000 (spanning about 40 CIELAB units), which was much larger than any previous experiment. The obtained color matching data are useful for derivation, validation, and analysis of color matching functions. © 2015 Wiley Periodicals, Inc. Col Res Appl, 41, 530–539, 2016
- 23 June 2015
- Published by Wiley in Color Research & Application
- Vol. 41 (5) , 530-539
Color matching experiment for highlighting interobserver variability
Human color vision differs from person to person, not only when color deficiencies occur but also within color‐normal populations. Investigating individual variability in normal color vision is beneficial both for clinical purposes and for quantifying observer metamerism. Researchers have used color matches such as Rayleigh matches, Moreland matches, the D&H color rule, and various combinations of different media for such investigations. However, none of them were originally aimed at investigating the interobserver variability in color‐normal populations, but rather were aimed at screening for color‐deficiencies. The objective of this study was, therefore, to design and carry out a color matching experiment where observer variability appeared as large as possible to detect the interobserver differences in the color‐normal population. Color matching was simulated under different combinations of reference spectrum and matching primaries using ColorChecker patches, different display/projector primaries, and the Stiles and Burch 49 observers. The simulation results showed: (1) The choice of spectra for the matching primaries had a significant effect on observer variability, (2) observer variability was large for near‐neutral reference colors, and (3) observer variability in the lightness direction was small relative to chromatic variability. The color matching experiment highlighting interobserver variability was designed based on these three findings and carried out for 61 color‐normal observers. Typical interobserver variability was 9.2 mean color difference from the mean (MCDM) using CIEDE2000 (spanning about 40 CIELAB units), which was much larger than any previous experiment. The obtained color matching data are useful for derivation, validation, and analysis of color matching functions. © 2015 Wiley Periodicals, Inc. Col Res Appl, 41, 530–539, 2016
- 1 June 2015
- Published by SAGE Publications in Perception
- Vol. 44 (6) , 613-627
Depth-of-Focus Affects 3D Perception in Stereoscopic Displays
Stereoscopic systems present binocular images on planar surface at a fixed distance. They induce cues to flatness, indicating that images are presented on a unique surface and specifying the relative depth of that surface. The center of interest of this study is on a second problem, arising when a 3D object distance differs from the display distance. As binocular disparity must be scaled using an estimate of viewing distance, object depth can thus be affected through disparity scaling. Two previous experiments revealed that stereoscopic displays can affect depth perception due to conflicting accommodation and vergence cues at near distances. In this study, depth perception is evaluated for farther accommodation and vergence distances using a commercially available 3D TV. In Experiment 1, we evaluated depth perception of 3D stimuli at different vergence distances for a large pool of participants. We observed a strong effect of vergence distance that was bigger for younger than for older participants, suggesting that the effect of accommodation was reduced in participants with emerging presbyopia. In Experiment 2, we extended 3D estimations by varying both the accommodation and vergence distances. We also tested the hypothesis that setting accommodation open loop by constricting pupil size could decrease the contribution of focus cues to perceived distance. We found that the depth constancy was affected by accommodation and vergence distances and that the accommodation distance effect was reduced with a larger depth-of-focus. We discuss these results with regard to the effectiveness of focus cues as a distance signal. Overall, these results highlight the importance of appropriate focus cues in stereoscopic displays at intermediate viewing distances.
- 1 June 2015
- Published by SAGE Publications in Perception
- Vol. 44 (6) , 613-627
Depth-of-Focus Affects 3D Perception in Stereoscopic Displays
Stereoscopic systems present binocular images on planar surface at a fixed distance. They induce cues to flatness, indicating that images are presented on a unique surface and specifying the relative depth of that surface. The center of interest of this study is on a second problem, arising when a 3D object distance differs from the display distance. As binocular disparity must be scaled using an estimate of viewing distance, object depth can thus be affected through disparity scaling. Two previous experiments revealed that stereoscopic displays can affect depth perception due to conflicting accommodation and vergence cues at near distances. In this study, depth perception is evaluated for farther accommodation and vergence distances using a commercially available 3D TV. In Experiment 1, we evaluated depth perception of 3D stimuli at different vergence distances for a large pool of participants. We observed a strong effect of vergence distance that was bigger for younger than for older participants, suggesting that the effect of accommodation was reduced in participants with emerging presbyopia. In Experiment 2, we extended 3D estimations by varying both the accommodation and vergence distances. We also tested the hypothesis that setting accommodation open loop by constricting pupil size could decrease the contribution of focus cues to perceived distance. We found that the depth constancy was affected by accommodation and vergence distances and that the accommodation distance effect was reduced with a larger depth-of-focus. We discuss these results with regard to the effectiveness of focus cues as a distance signal. Overall, these results highlight the importance of appropriate focus cues in stereoscopic displays at intermediate viewing distances.
- 1 July 2014
- Published by Elsevier in Vision Research
- Vol. 100, 124-133
Effect of the accommodation-vergence conflict on vergence eye movements
- 1 July 2014
- Published by Elsevier in Vision Research
- Vol. 100, 124-133
Effect of the accommodation-vergence conflict on vergence eye movements
- 1 January 2014
- Published by SAGE Publications in Perception
- Vol. 43 (6) , 481-498
Perceived Rigidity in Motion-in-Depth Increases with Contour Perspective
When observers are asked to match the depth of an object according to its height, they often report systematic errors depending on viewing distance. Systematic biases can also arise while vergence distances are induced by binocular disparities. Observers of stereoscopic images tend to overestimate the depth of objects displayed in front of the screen, while the depth of objects displayed behind the screen plane is underestimated. This phenomenon creates a serious problem in that veridicality in depth perception appears distorted when one attempts to render the metrics of a captured 3-D world. These distortions could also subsist with structure-from-motion information and during motion-in-depth. Observers judged the circularity of transparent rotating cylinders that were either static or moving in depth. Crossed results show that participants could precisely retrieve the best modulation between presented depth and width. As this effect could be amplified with stimuli containing stronger perspective cues (ie contour perspective), participants judged the rigidity of spinning cubes, moving along the line of sight, which were either edges-defined or defined by randomly textured surfaces (dots). The results showed that, although depth constancy was not improved by contour perspective, perceived rigidity was increased by perspective when the best scaling estimate was displayed. This finding suggests that appropriate binocular disparity information in combination to monocular signal is necessary for stereoscopic depth perception.
- 1 January 2014
- Published by SAGE Publications in Perception
- Vol. 43 (6) , 481-498
Perceived Rigidity in Motion-in-Depth Increases with Contour Perspective
When observers are asked to match the depth of an object according to its height, they often report systematic errors depending on viewing distance. Systematic biases can also arise while vergence distances are induced by binocular disparities. Observers of stereoscopic images tend to overestimate the depth of objects displayed in front of the screen, while the depth of objects displayed behind the screen plane is underestimated. This phenomenon creates a serious problem in that veridicality in depth perception appears distorted when one attempts to render the metrics of a captured 3-D world. These distortions could also subsist with structure-from-motion information and during motion-in-depth. Observers judged the circularity of transparent rotating cylinders that were either static or moving in depth. Crossed results show that participants could precisely retrieve the best modulation between presented depth and width. As this effect could be amplified with stimuli containing stronger perspective cues (ie contour perspective), participants judged the rigidity of spinning cubes, moving along the line of sight, which were either edges-defined or defined by randomly textured surfaces (dots). The results showed that, although depth constancy was not improved by contour perspective, perceived rigidity was increased by perspective when the best scaling estimate was displayed. This finding suggests that appropriate binocular disparity information in combination to monocular signal is necessary for stereoscopic depth perception.
- 1 January 2014
- Published by Springer Nature in Lecture Notes in Computer Science
- p. 18-25
Multiple Color Matches to Estimate Human Color Vision Sensitivities
- 1 January 2014
- Published by Springer Nature in Lecture Notes in Computer Science
- p. 18-25
Multiple Color Matches to Estimate Human Color Vision Sensitivities