Haris Kurtovic
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Haris Kurtovic has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
Ingo Hahn
Institute of Electrical Drives and Machines, Friedrich-Alexander University Erlangen-Nuremberg, Erlangen, Germany
5 shared publications- Qurban Ali Shah Syed
Chair of Electrical Drives and Machines, University of Erlangen-Nuremberg, Erlangen 91058, Germany
3 shared publications I. Hahn
Electrical Drives and Machines, University of Erlangen-Nürnberg, Germany
2 shared publicationsA. Lindner
1 shared publicationAndreas Lindner
Electrical Machines and Drives, University of Erlangen-Nuremberg, Cauerstraße 9 91052 Erlangen, Germany
1 shared publication- Ingo Hahn
Institute of Electrical Drives and Machines, University of Erlangen-Nuremberg, 91058 Erlangen, Germany
1 shared publication
Latest Publications
- 10 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 56 (2) , 1-4
Calculation of Active Material’s Torque Contributions for a Flux Switching Machine
A new calculation method for the torque contribution of an arbitrary point or element in an electric machine’s geometry is developed. The local torque contributions (LTC) and their visualizations, provide insights into the iron utilization and possible machine geometry improvements. The flux tubes created from the magnetic vector potential’s equipotential lines, are interpreted as a set of localized magnetic circuits (LMCs). Each LMCs, that crosses the air-gap, contributes to the machine’s torque, which is quantifiable by applying the Maxwell stress tensor to the LMCs air-gap intersections. The torque contributions are mapped to all finite elements belonging to each LMC, for each transient calculation’s rotor step. Furthermore, the torque contribution data is briefly discussed and a harmonic analysis is performed, focusing on the mean and ripple components of the torque. Finally, a brief example of a topological optimization with the calculated torque contributions as optimization criteria is presented and evaluated.
- 10 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 56 (2) , 1-4
Calculation of Active Material’s Torque Contributions for a Flux Switching Machine
A new calculation method for the torque contribution of an arbitrary point or element in an electric machine’s geometry is developed. The local torque contributions (LTC) and their visualizations, provide insights into the iron utilization and possible machine geometry improvements. The flux tubes created from the magnetic vector potential’s equipotential lines, are interpreted as a set of localized magnetic circuits (LMCs). Each LMCs, that crosses the air-gap, contributes to the machine’s torque, which is quantifiable by applying the Maxwell stress tensor to the LMCs air-gap intersections. The torque contributions are mapped to all finite elements belonging to each LMC, for each transient calculation’s rotor step. Furthermore, the torque contribution data is briefly discussed and a harmonic analysis is performed, focusing on the mean and ripple components of the torque. Finally, a brief example of a topological optimization with the calculated torque contributions as optimization criteria is presented and evaluated.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 629-636
Neural Network Meta-Modeling and Optimization of Flux Switching Machines
This paper presents the application of neural networks (NN)in the design and optimization of the flux switching machine. A finite element (FE)model of the flux switching machine is used to create data for the training of NNs. The trained NN meta-models are used to predict the properties of machine designs. Subsequently, a preselection from these predictions for further FE calculations is employed. Based on this approach, a generational NN based optimization is implemented. Furthermore, during the optimization many NN topologies and output variable combinations are investigated. The NN predictions and their quality are evaluated according to output variables, generations, and NN layouts. In addition, the improvements in the machine's capabilities are presented using a Pareto-domination based approach.
- 1 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 629-636
Neural Network Meta-Modeling and Optimization of Flux Switching Machines
This paper presents the application of neural networks (NN)in the design and optimization of the flux switching machine. A finite element (FE)model of the flux switching machine is used to create data for the training of NNs. The trained NN meta-models are used to predict the properties of machine designs. Subsequently, a preselection from these predictions for further FE calculations is employed. Based on this approach, a generational NN based optimization is implemented. Furthermore, during the optimization many NN topologies and output variable combinations are investigated. The NN predictions and their quality are evaluated according to output variables, generations, and NN layouts. In addition, the improvements in the machine's capabilities are presented using a Pareto-domination based approach.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1321-1326
Analytical Time Domain Flux-MMF Model for the Flux Switching Machine
A modeling approach for the flux switching machine., based on the flux-MMF method is proposed. Under the model assumptions of radial flux and infinite iron permeability., the machine is simplified to current loadings and permeances along the air gap. These quantities are used to calculate the flux and induced voltage of the machine and are functions of the rotor angle and current phase. The modeling approach is independent of the machine type and is performed in the space and time domain., without transforming any quantities into the frequency domain. The results of the model are presented and a comparison to finite element results is given.
- 1 June 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1321-1326
Analytical Time Domain Flux-MMF Model for the Flux Switching Machine
A modeling approach for the flux switching machine., based on the flux-MMF method is proposed. Under the model assumptions of radial flux and infinite iron permeability., the machine is simplified to current loadings and permeances along the air gap. These quantities are used to calculate the flux and induced voltage of the machine and are functions of the rotor angle and current phase. The modeling approach is independent of the machine type and is performed in the space and time domain., without transforming any quantities into the frequency domain. The results of the model are presented and a comparison to finite element results is given.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Double stator and single rotor type single-phase flux switching axial flux permanent magnet motor
In this paper, a new single-phase flux switching axial flux permanent magnet motor (FS AFPM) is presented. It has a double stator and single rotor (DSSR) disc-type structure. The rotor disc is a simple salient pole rotor, and it is sandwiched between the two stator discs. The permanent magnets (PMs) are embedded in the stator discs, which also contain the single-phase windings. To enhance the self-starting torque capability and unidirectional rotation, the rotor pole is chamfered. The characteristic analysis of the proposed DSSR type single-phase FS AFPM is carried out using the 3D finite element analysis (FEA).
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Double stator and single rotor type single-phase flux switching axial flux permanent magnet motor
In this paper, a new single-phase flux switching axial flux permanent magnet motor (FS AFPM) is presented. It has a double stator and single rotor (DSSR) disc-type structure. The rotor disc is a simple salient pole rotor, and it is sandwiched between the two stator discs. The permanent magnets (PMs) are embedded in the stator discs, which also contain the single-phase windings. To enhance the self-starting torque capability and unidirectional rotation, the rotor pole is chamfered. The characteristic analysis of the proposed DSSR type single-phase FS AFPM is carried out using the 3D finite element analysis (FEA).
- 16 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 53 (11) , 1-5
New Single-Phase Flux Switching Axial Flux Permanent Magnet Motor
In this paper, a new topology of a single-phase flux switching permanent magnet motor (FSPM) is presented. Unlike conventional FSPMs, the airgap flux flows in the axial direction, therefore, it is named as the flux switching axial flux permanent magnet motor (FS AFPM). The proposed single-phase FS AFPM has a compact disc-type structure, four stator pole teeth and two rotor pole teeth (4/2 combination). However, number of the stator poles as well as the rotor poles can be easily increased, due to an enlarged circumferential length. It has two discs, one for the stator and other for the rotor. Like conventional FSPMs, this machines has a simple salient rotor pole structure. Along with the armature windings, the permanent magnets (PMs) are also embedded in the stator. A 3D finite element analysis (FEA) is carried out for the characteristic analysis of the proposed single-phase FS AFPM. For the enhancement of the self-starting torque capability and unidirectional rotation, the rotor pole is tapered.
- 16 May 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Magnetics
- Vol. 53 (11) , 1-5
New Single-Phase Flux Switching Axial Flux Permanent Magnet Motor
In this paper, a new topology of a single-phase flux switching permanent magnet motor (FSPM) is presented. Unlike conventional FSPMs, the airgap flux flows in the axial direction, therefore, it is named as the flux switching axial flux permanent magnet motor (FS AFPM). The proposed single-phase FS AFPM has a compact disc-type structure, four stator pole teeth and two rotor pole teeth (4/2 combination). However, number of the stator poles as well as the rotor poles can be easily increased, due to an enlarged circumferential length. It has two discs, one for the stator and other for the rotor. Like conventional FSPMs, this machines has a simple salient rotor pole structure. Along with the armature windings, the permanent magnets (PMs) are also embedded in the stator. A 3D finite element analysis (FEA) is carried out for the characteristic analysis of the proposed single-phase FS AFPM. For the enhancement of the self-starting torque capability and unidirectional rotation, the rotor pole is tapered.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
New single phase flux switching axial flux permanent magnet motor
Conventional single phase permanent magnet (PM) brushless DC motors (BLDC) are used in low power consumption applications, which require relatively small torque, such as fans and pumps. In this paper, a new topology of a single phase FSPM is proposed. In the final paper, a detailed characteristic analysis will be carried out, by varying the rotor teeth pole pitch, the chamfer depth and length, the stator slot opening width and also increasing the number of rotor poles and stator slots.
- 1 April 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
New single phase flux switching axial flux permanent magnet motor
Conventional single phase permanent magnet (PM) brushless DC motors (BLDC) are used in low power consumption applications, which require relatively small torque, such as fans and pumps. In this paper, a new topology of a single phase FSPM is proposed. In the final paper, a detailed characteristic analysis will be carried out, by varying the rotor teeth pole pitch, the chamfer depth and length, the stator slot opening width and also increasing the number of rotor poles and stator slots.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
Analysis and improvement of a toroidal wound permanent magnet flux-switching machine
A 6/8 flux-switching machine with large air-gap and toroidal winding design is presented. The fractional-slot winding of C-core flux-switching machine is wound around the stator yoke instead of the stator pole in this machine design. On the basis of the C-core flux-switching machine several modifications of the stator core shape and of PM arrangement are evaluated by means of 2D Finite Element Analysis. A significant enhancement of the torque capability of the toroidal winding design can be achieved by some minor changes of the stator core shape. Additionally, the application of Halbach shaped magnets leads to even more torque and a reduction of the leakage flux at the stator outer diameter.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-10
Analysis and improvement of a toroidal wound permanent magnet flux-switching machine
A 6/8 flux-switching machine with large air-gap and toroidal winding design is presented. The fractional-slot winding of C-core flux-switching machine is wound around the stator yoke instead of the stator pole in this machine design. On the basis of the C-core flux-switching machine several modifications of the stator core shape and of PM arrangement are evaluated by means of 2D Finite Element Analysis. A significant enhancement of the torque capability of the toroidal winding design can be achieved by some minor changes of the stator core shape. Additionally, the application of Halbach shaped magnets leads to even more torque and a reduction of the leakage flux at the stator outer diameter.