ANAhmed Osama Abo El Naga

Ahmed Osama Abo El Naga

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ahmed Osama Abo El Naga has a total of 42 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Toward sustainable activated carbon from peanut shells for efficient cationic dye removal: equilibrium, kinetics, and cost evaluation

    by Aya S. Mahmoud, Mohamed El Saied, Seham Ali Shaban, Ahmed O. Abo El Naga

    Transforming abundant agricultural residue into high-performance carbonaceous adsorbents has emerged as a green and cost-effective strategy for the efficient removal of dyes from contaminated effluents. In this study, activated carbon adsorbents (referred to as PNSAC-x) were synthesized from peanut shells (PNS) using phosphoric acid as a cost-effective activating agent. Activation was conducted at a relatively low temperature of 400 ℃, employing PNS: H 3 PO 4 weight ratios of 1:1, 1:2, and 1:3. The developed carbons were evaluated for their adsorption performance in removing crystal violet (CV) as a model cationic dye. Among the synthesized samples, PNSAC-3 (1:3 ratio) exhibited superior performance, achieving 98.9% CV removal within only 20 min at natural pH, with an adsorbent dosage of 0.3 g L − 1 at 25 °C. Comprehensive characterization confirmed that PNSAC-3 possesses an amorphous structure with a well-developed porous network, reaching a maximum adsorption capacity of 145 mg g -1 under the investigated conditions. Cost analysis demonstrated the economic feasibility of PNSAC-3 production, with an estimated cost as low as 115 LE kg⁻¹ using commercial-grade phosphoric acid. The adsorption kinetics followed the pseudo-second-order model (R 2 = 0.998), while the equilibrium data were best described by the Langmuir isotherm model (R 2 = 0.999). Thermodynamic studies indicated a spontaneous and endothermic adsorption process with increased feasibility at elevated temperatures. pH-dependent studies showed that the adsorption process involved both electrostatic forces and non-electrostatic interactions, including hydrogen bonding, hydrophobic effects, and π-π interactions. PNSAC-3 also demonstrated excellent reusability, retaining more than 94.4% of its adsorption efficiency after five adsorption–desorption cycles. These findings underscore the potential of PNSAC-3 as a highly efficient and cost-competitive adsorbent for the large-scale removal of cationic dyes from industrial wastewater.


  • Open Access

    Catalytic reduction of toxic dyes over nickel oxide nanoparticles supported on CMK-3 catalyst

    by Mohammed M. Younus, M. A. Sayed, Mohamed El Saied, Ahmed O. Abo El Naga

    In the current paper, a NiO nanoparticles-loaded mesoporous carbon (CMK-3) catalyst, denoted as NiO/CMK-3, has been successfully synthesized using a facile strategy. The as-prepared material has been characterized through XRD, Raman spectroscopy, low-temperature N2 physisorption measurements, FTIR, FE-SEM, TEM, and XPS. The as-fabricated NiO/CMK-3 catalyst manifested a superior activity in the NaBH4-assisted reduction of methylene blue (MB) dye to its colorless leuco form. Remarkably, over 99% of 25 mg L−1 MB was reduced by 7.5 mM/L NaBH4 using 0.1 g L−1 NiO/CMK-3 within 3 min at room temperature. Furthermore, the kinetics study confirmed the appropriateness of the pseudo-first-order kinetic model for elucidating the kinetics of MB reduction by the catalyst. Importantly, the NiO/CMK-3 catalyst maintained almost constant catalytic activity even after 5 times of reuse in MB reduction, demonstrating its superior stability and reusable ability. So, NiO/CMK-5 appears as a promising heterogeneous catalyst for the effective remediation of dye-containing wastewater.


  • Open Access

    Activation of peroxymonosulfate with ZIF-67-derived Co/N-doped porous carbon nanocubes for the degradation of Congo red dye

    by Aya Khamis, Aya S. Mahmoud, Ahmed O. Abo El Naga, Seham A. Shaban, Nadia A. Youssef

    In this study, porous carbon nanocubes encapsulated magnetic metallic Co nanoparticles (denoted as Co@N-PCNC) was prepared via pyrolyzing ZIF-67 nanocubes precursor at 600 °C and characterized by various technologies. It was used to activate peroxymonosulfate (PMS) to degrade Congo red (CR) dye efficiently. Over 98.45% of 50 mg L−1 CR was degraded using 0.033 mM PMS activated by 75 mg L−1 Co@N-PCNC within 12 min. The free radical quenching experiments were performed to reveal the nature of the reactive oxygen species radicals generated throughout the catalytic oxidation of CR. The effects of common inorganic anions and the water matrix on CR removal were studied. Moreover, the results of the kinetic study revealed the suitability of the pseudo-first-order and Langmuir–Hinshelwood kinetic models for illustrating CR degradation using the Co@N-PCNC/PMS system. Ultimately, the Co@N-PCNC displayed good operational stability, and after five cycles, the CR removal rate can still maintain over 90% after 12 min.


  • Open Access

    Xylene Isomerization using Hierarchically Mesoporous ZSM-5

    by Ahmed El Fadaly, M. A. Sayed, Ahmed O. Abo El Naga, Mohamed El Saied, Seham Ali Shaban, Fouad I. Elhosiny

    The current study described the synthesis of H-ZSM-5 zeolites with hierarchical micro-meso- porosity (HM-ZSM-5-x) via the soft-templating route, employing organosilane surfactant, 3-[(trimethoxysilyl) propyl]octyldimethyl-ammonium chloride, as the mesoporous template. The catalytic performance was examined in the isomerization of o-xylene in a fixed-bed reactor at atmospheric pressure. Many techniques were conducted to characterize the catalysts. The X-ray diffraction (XRD) and Fourier Transform Infra Red (FTIR) results affirmed that all mesoporous zeolites possess the characteristic MFI structure, as well as good crystallinity. The N2 physisorption measurements signified that all HM-ZSM-5-x samples have higher surface areas and pore volumes than the micro-ZSM-5 sample, with the mesopores accounting for the vast majority of the total surface areas and pore volumes of HM-ZSM-5-x samples. Moreover, the mesoporosity of the obtained HM-ZSM-5-x zeolites can be simply tuned via the variation of the amount of TPOAC used. Compared with classical micro-ZSM-5, the HM-ZSM-5-0.15 sample possessed a higher o-xylene conversion and p-xylene yield that was attributed to its remarkable textural characteristics in terms of higher surface area and prevailing mesoporous character that led to a reduced diffusion limitation. Importantly, the catalyst manifested superb operational stability within 50 h, indicating high resistance against deactivation through coke deposition. Copyright © 2023 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).


  • Open Access

    Activation of Peroxymonosulfate with ZIF-67-derived Co/N-doped Porous Carbon Nanocubes for the Degradation of Congo Red Dye

    by Aya Khamis, Aya S. Mahmoud, Ahmed O. Abo El Naga, Seham A. Shaban, Nadia Abd Elhakim

    In this study, porous carbon nanaocubes encapsulated magnetic metallic Co nanoparticles (denoted as Co@N-PCNC) was prepared via pyrolyzing ZIF-67 nanocubes precursor at 600°C, and characterized by various technologies. It was used to activate peroxymonosulfate (PMS) to degrade Congo red (CR) dye efficiently. Over 98.45% of 50 mg/L CR with initial pH of 5.5 was degraded by 100 mg/L PMS activated by 10 mg/L Co@N-C within 12 min. The free radical quenching experiments were performed to reveal the nature of the reactive oxygen species radicals generated throughout the catalytic oxidation of CR. The effects of common inorganic anions and water matrix on CR removal were studied. The Co@N-PCNC displayed good operational stability, and after three cycles, the CR removal rate can still maintain over 90% after 12 min reaction.

  • Open Access

    Efficient adsorption of acetaminophen from the aqueous phase using low-cost and renewable adsorbent derived from orange peels

    by Mohamed El Saied, Seham A. Shaban, Mohsen S. Mostafa, Ahmed O. Abo El Naga

    Pharmaceutically active compounds (PhACs) are frequently detected emerging pollutants in water resources worldwide that provoke pernicious influences on human health and the ecosystem. Developing effective carbonaceous adsorbents from biomass for the efficient removal of PhACs has lately drawn significant research attention. Herein, an efficient and cost-effective activated carbon was produced via ZnCl2-activation, employing orange peels as a precursor (named hereafter as OPAC). OPAC was well-characterized and applied in the sequestration of acetaminophen (N-acetyl-para-aminophenol, APAP), a broadly used non-steroidal anti-inflammatory drug, from water media using the batch technique. OPAC exhibited excellent performance, and more than 95.5% APAP was removed after 90 min, in the pH range of 2.0–8.0, using 1 g/l adsorbent at 25 °C. Additionally, the equilibrium and the kinetic studies outcomes unveiled the suitability of the Langmuir and the pseudo-second-order kinetic models, respectively, to describe the adsorption process. Based on the pH-adsorption dependence and OPAC properties, the presumable mechanism was mainly dominated by non-electrostatic interactions, including hydrogen bonding, π-π interactions, and pore diffusion. Thermodynamically, the process was found to be spontaneous and endothermic. Ultimately, OPAC manifested outstanding recyclability, with at least 95% of the initial efficiency being preserved after five cycles, making it more attractive from the environmental and economic perspectives.


  • Potato peel waste-derived carbon-based solid acid for the esterification of oleic acid to biodiesel

    by Modather F. Hussein, Ahmed O. Abo El Naga, Mohamed El Saied, Mahmoud M. AbuBaker, Seham A. Shaban, Fathy Y. El Kady


  • Metal–Organic frameworks encapsulated with vanadium-substituted heteropoly acid for highly stable asymmetric supercapacitors

    by Aya M. Mohamed, Mohamed Ramadan, Nashaat Ahmed, Ahmed O. Abo ElNaga, Hafsa H. Alalawy, T. Zaki, Seham A. Shaban, Hanaa B. Hassan, Nageh K. Allam


  • Preparation and characterization of Li2B4O7 – TiO2 – SiO2 glasses doped with metal-organic framework derived nano-porous Cr2O3

    by A. Dahshan, Yasser B. Saddeek, K.A. Aly, K.H.S. Shaaban, Modather F. Hussein, Ahmed O. Abo El Naga, S.A. Shaban, S.O. Mahmoud