Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nicolò Morselli has a total of 62 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Hydrogen Production from Agro-Industrial Residues of the Wine Industry: A Techno-Economic Analysis

    by Enrico Sola, Niccolò Fantasia, Marco Puglia, Nicolò Morselli, Giulio Allesina, Paolo Tartarini, Simone Pedrazzi

    The growing global energy demand and the urgent need to decarbonize the energy sector are driving the search for renewable and low-impact energy sources. Within this context, the conversion of biomass into hydrogen represents a viable pathway to sustainable energy, enabling both carbon mitigation and circular use of agricultural residues. This research focuses on the simulation of an integrated system that converts viticulture residues, vine prunings and grape stalks into biogenic hydrogen through a combination of pretreatment, gasification, and upgrading stages. The analysis of four different supply scenarios shows that the integration of prunings and stalks ensures the highest hydrogen yield (6.61 × 105 Nm3/year of H2) and the highest energy self-sufficiency, with 25% of produced syngas used to partially cover internal energy demand. Gasification enables the process to be carbon-negative, saving 1.18 kgCO2eq for Nm3 of H2 produced, and economically competitive, with a break-even price of 3.81 €/kg and a return on investment of ten years. The study aligns with the decarbonization goals of the European energy transition, promoting local and circular valorization of agro-industrial waste.

  • Open Access

    Statistical Analysis Based on Monte Carlo Method of the Technical and Economic Feasibility of Biomass Flame Weeding: Case Study of an Organic Farm

    by Luca Talucci, Simone Pedrazzi, Giulio Allesina, Nicolò Morselli

    This work aims to evaluate the introduction of biomass flame weeding (FW) as a carbon-neutral technology for weed management in agricultural enterprises. The case study focuses on a biodynamic farm in the Molise region (Italy) introducing FW as a complementary technology alongside the traditional mechanical methods. In the project layout FW is applied exclusively around the trunks of olive and vine crops. The case study foresees the generation of thermal energy required for FW using a gasifier powered directly by the woody biomass waste produced by the farm. The production of biochar as a solid by-product of the gasification process was also examined. The economic analysis was conducted by structuring a simulation based on the Monte Carlo method, applied to the Net Present Value (NPV). Three output parameters were taken into consideration: NPV at the final year of investment, Internal Rate of Return and the payback period. For each parameter, a corresponding probability distribution was established. The results indicate that the average NPV can range from €6,342.27 to €9,796.06. Furthermore, the probability that the payback period is between zero and fifteen years can vary between 78.2% and 83.9%, suggesting a strong capacity for the project to be self-sustaining.

  • Open Access

    Hydrogen utilization for decarbonizing the dairy industry: A techno-economic scenario analysis

    by Marco Puglia, Simone Boccaletti, Ahmet Fatih Kaya, Nicolò Morselli, Giulio Allesina, Simone Pedrazzi

  • Open Access

    Optimizing the Powertrain of a Fuel Cell Electric Bus: A Sizing and Hybridization Analysis

    by Ahmet Fatih Kaya, Marco Puglia, Nicolò Morselli, Giulio Allesina, Simone Pedrazzi

    In this study, the impact of the electric motor size and the hybridization ratio of a Fuel Cell Electric Bus on its vehicle performance (i.e., gradeability and acceleration) and fuel consumption was investigated using the ADVISOR software. The investigation first involved a parametric analysis with different electric motor and fuel cell sizes for the dynamic performance metrics, specifically the 0–60 km/h vehicle acceleration and the maximum gradeability (%) at a constant speed of 20 km/h. The results revealed that the acceleration is most sensitive to fuel cell power. Regarding gradeability, a more complex relationship was observed: when the electric motor power was below 215 kW, gradeability remained consistently low regardless of the fuel cell size. However, for motors exceeding 215 kW, fuel cell power then became a significant influencing factor on the vehicle’s climbing capability. Subsequently, the analysis focused on the effect of the hybridization ratio, which represents the power balance between the fuel cell and the energy storage system, varied between 0 and 0.8. Results showed that increasing the hybridization ratio decreases gradeability and acceleration performance and increases total energy consumption. This trade-off is quantitatively illustrated by the results over the Central Business District (CBD) driving cycle. For instance, the pure battery-electric configuration (a hybridization ratio of 0), featuring a 296 kW battery system, recorded a gradeability of 12.4% and an acceleration time of 16.3 s, while consuming 28,916 kJ. At an intermediate hybridization ratio of 0.4 (composed of a 118.4 kW fuel cell and a 177.6 kW battery), performance remained high with a gradeability of 12.2% and an acceleration of 17.3 s, but the energy consumption increased to 43,128 kJ. Finally, in the fuel-cell-dominant configuration with a hybridization ratio of approximately 0.8 (a 236.8 kW fuel cell and a 59.2 kW battery), gradeability dropped to 8.4%, acceleration time deteriorated to 38.9 s, and total energy consumption increased further to 52,678 kJ over the CBD driving cycle.

  • Open Access

    Characterization and Durability of Cool Materials: Standard Methodologies for the Evaluation of Thermal Performance of New and Aged Products

    by Chiara Ferrari, Marco Puglia, Nicolò Morselli, Simone Pedrazzi, Giulio Allesina, Mauro A. Corticelli, Paolo Tartarini, Alberto Muscio

    This study highlights how the analysis of the long-term performance of solar reflective materials used both as roofing and flooring solutions to mitigate urban overheating has recently become more important. European and Italian legislations focus just on initial properties, but actual energy efficiency depends on durability over time. The objective is the development and the validation of characterization methodologies that consider performance degradation due to aging, providing reliable guidance for designers and policy makers. This study integrates standard thermophysical characterization methods with natural and accelerated aging protocols. Solar reflectance (SR) measurements can be performed by using ultraviolet-visible-near-infrared spectrophotometer, solar spectrum reflectometer and pyranometer/albedometer, while thermal emissivity can be measured with infrared emissometers. Natural aging was implemented at the Energy Efficiency Laboratory structure of the University of Modena and Reggio Emilia, operational since 2017. Accelerated methods include the standard protocol for surface soiling and an innovative method for biological growth. The analysis reveals significant degradations in SR, with reductions of between 10% and 40% after three years of natural exposure. Bituminous membranes show the most marked degradation, while ceramic materials present the best stability. Accelerated methods show interesting correlations with natural aging. The doubling of the standard accelerated cycle, designed on North American climatic conditions, is more representative of European climatic conditions characterized by greater air pollution. It must be recalled that evaluation based just on initial performance significantly underestimates long-term behaviour. The results suggest the need to update regulations by introducing requirements based on post-ageing performance. New materials design should be focus on durability by integrating into new materials both self-cleaning properties and improved stability over time. While, during design process, materials with certified long-term stability, analyzed through durability and degradation analysis should be considered in energy and economic assessments.

  • Open Access

    Metabolomic Insights into the Potential of Chestnut Biochar as a Functional Feed Ingredient

    by Serena Reggi, Sara Frazzini, Simone Pedrazzi, Martina Ghidoli, Maria Claudia Torresani, Marco Puglia, Nicolò Morselli, Marianna Guagliano, Cinzia Cristiani, Salvatore Roberto Pilu, et al.

    Biochar is potentially a functional ingredient in animal nutrition that offers health benefits such as detoxification, while also promoting environmental sustainability through carbon sequestration, emission reduction, and its circular production. However, the heterogeneity of commercially available biochar products requires a detailed assessment of their functional properties for applications in animal feed. This study evaluates chestnut biochar from morphological, chemical, and metabolomic perspectives and assesses its functional properties. Metabolomic analysis of a water extract using QTOF HPLC-MS/MS confirmed the presence of bioactive compounds, such as hydroxybenzoic and succinic acids, highlighting its potential as a functional feed ingredient. The chestnut biochar inhibited the growth of the pathogenic E. coli strains F18+ and F4+, with maximum inhibition rates of 15.8% and 28.6%, respectively, after three hours of incubation. The downregulation of genes associated with quorum sensing (MotA, FliA, FtsE, and HflX, involved in biofilm formation and cellular division) suggests that biochar interferes with several aspects of the pathogenic process. Importantly, biochar was not found to adversely affect beneficial probiotic bacteria, such as Lactiplantibacillus plantarum and Limosilactobacillus reuteri. These findings support the potential of chestnut biochar as a versatile ingredient for sustainable animal nutrition, thus promoting animal welfare while offering environmental benefits.


  • Open Access

    Biochar-Aided Heat Transfer in Ground Source Heat Pumps: Effects on Water Capillary Rise and Carbon Storage Capability

    by Nicolò Morselli, Filippo Ottani, Marco Puglia, Simone Pedrazzi, Paolo Tartarini, Giulio Allesina

    Ground source heat pump systems rely on soil conductivity for optimal performance, and soil conductivity is primarily influenced by soil moisture content. In this study, we investigate how biochar, a porous material derived from biomass gasification and pyrolysis, influences capillary water rise and moisture retention in soil. Mixtures of biochar with soil and sand in varying ratios, along with control mixtures, were prepared and tested on lab-scale equipment. The results showed that biochar-amended samples exhibited a significantly higher capillary water rise. At a height of 0.25 m above the water level, the minimum moisture content in the biochar-treated samples was 43.5%, much higher than the 6.5% recorded in the control group, which consisted of soil or soil and sand only. Even in the long term, mixtures with biochar maintained high moisture content, ranging from 36% to 57%, compared to the control’s 8%, at heights near 0.5 m over the free surface of the water. Moreover, the utilization of biochar as a soil improver in geothermal application is an innovative way for carbon sequestration which, in the analyzed conditions, leads to the storage of up to 0.7 tons of CO2eq per square meter of geothermal field.

  • Enhancing Energy-Efficient Thermal Control in Buildings with a Hybrid M-Cycle/Vapor Compression Refrigeration System

    by Alberto Muscio, Michele Cossu, Roberto Sedoni, Nicolò Morselli, Marco Puglia, Giulio Allesina, Simone Pedrazzi, Diego Angeli

  • Open Access

    Identification of Heat Transfer Parameters for Gravity Sand Casting Simulations

    by Alberto Vergnano, Pietro Facondini, Nicolò Morselli, Paolo Veronesi, Francesco Leali

    Gravity sand casting simulations require accurate modelling of heat transfer phenomena to reliably evaluate the expected quality of the produced parts. Average model parameters can be easily retrieved from a validated database. However, these parameters are highly dependent on the specific sand used and the actual forming process in the foundry. Furthermore, the heat transfer from the solidifying alloy to the mould surfaces is not precisely known, so simulation models usually use typical values for overall heat transfer coefficients. Most research works investigate individual parameters, whereas heat transfer phenomena largely arise from their interaction together. Therefore, the present work describes a combined experimental and computational method based on genetic algorithm techniques for determining the most important parameters for heat transfer in a sand mould. The experiments examine both virgin and reused sand, as these are alternatively used in the foundry for mould forming. The density, thermal conductivity, and specific heat capacity of the different sands are identified, along with heat transfer coefficients. The counterproof simulations demonstrate that the standard parameters are quite reliable for virgin sand. However, in the case of reused sand, the identified parameters lead to more reliable results.