Kazunobu Takahashi
Kazunobu Takahashi has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
Rongrong Chen
5 shared publicationsJun Wang
4 shared publications- Jun Wang
Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin, China
4 shared publications Peili Liu
4 shared publicationsXun Sun
4 shared publicationsYakun Li
4 shared publications
Latest Publications
- 1 August 2019
- Published by Elsevier in European Polymer Journal
- Vol. 117, 77-85
Fabrication of epoxy modified polysiloxane with enhanced mechanical properties for marine antifouling application
- 1 August 2019
- Published by Elsevier in European Polymer Journal
- Vol. 117, 77-85
Fabrication of epoxy modified polysiloxane with enhanced mechanical properties for marine antifouling application
- 24 April 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 58 (19) , 8016-8025
Synthesis of Amphiphilic Acrylate Boron Fluorinated Polymers with Antifouling Behavior
- 24 April 2019
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 58 (19) , 8016-8025
Synthesis of Amphiphilic Acrylate Boron Fluorinated Polymers with Antifouling Behavior
- 5 November 2018
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 42 (24) , 19908-19916
Antifouling behavior of self-renewal acrylate boron polymers with pyridine-diphenylborane side chains
Currently, most high-performance tributyltin (TBT)-free antifouling paints contain cuprous oxide (Cu2O) in their formulations, leading to a serious challenge to the marine environment and ecosystem. In this study, non-metal acrylate boron polymers (ABPs) were synthesized using acrylate acid polymers (AAPs) as the backbone and a pyridine-phenyl borane compound as the side chain with hydrolyzable functional groups. The antifouling mechanism of ABPs researched by XPS and EDS indicated that the antifouling performance of ABPs was realized by the hydrolysis of hydrophobic diphenyl borane pyridine side groups. The results of diatom anti-setting test showed that fewer or no algae cells were attached on the surfaces of ABPs with higher contents of hydrophobic diphenyl borane pyridine side groups. The growth rates of algae suspension solutions containing ABPs were close to that of the blank solution without ABPs. Antifouling paints made of ABPs showed excellent antifouling performances in the Yellow Sea of China. This study provides new insights into the development of ABPs with desirable antifouling properties and environmental friendliness.
- 5 November 2018
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 42 (24) , 19908-19916
Antifouling behavior of self-renewal acrylate boron polymers with pyridine-diphenylborane side chains
Currently, most high-performance tributyltin (TBT)-free antifouling paints contain cuprous oxide (Cu2O) in their formulations, leading to a serious challenge to the marine environment and ecosystem. In this study, non-metal acrylate boron polymers (ABPs) were synthesized using acrylate acid polymers (AAPs) as the backbone and a pyridine-phenyl borane compound as the side chain with hydrolyzable functional groups. The antifouling mechanism of ABPs researched by XPS and EDS indicated that the antifouling performance of ABPs was realized by the hydrolysis of hydrophobic diphenyl borane pyridine side groups. The results of diatom anti-setting test showed that fewer or no algae cells were attached on the surfaces of ABPs with higher contents of hydrophobic diphenyl borane pyridine side groups. The growth rates of algae suspension solutions containing ABPs were close to that of the blank solution without ABPs. Antifouling paints made of ABPs showed excellent antifouling performances in the Yellow Sea of China. This study provides new insights into the development of ABPs with desirable antifouling properties and environmental friendliness.
- 20 September 2017
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 41 (21) , 12767-12776
Hierarchical flower like double-layer superhydrophobic films fabricated on AZ31 for corrosion protection and self-cleaning
The designed sample is prepared by self-assembly of octadecyltrichlorosilane and deposition of ferric stearate, and the contact angle is 160°.
- 20 September 2017
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 41 (21) , 12767-12776
Hierarchical flower like double-layer superhydrophobic films fabricated on AZ31 for corrosion protection and self-cleaning
The designed sample is prepared by self-assembly of octadecyltrichlorosilane and deposition of ferric stearate, and the contact angle is 160°.
- Open Access
- 16 August 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (63) , 40020-40027
Synthesis of zinc-based acrylate copolymers and their marine antifouling application
Marine fouling organisms have caused inconvenience to humans for a long time owing to their high vitality and great destructiveness.
- 16 August 2017
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 7 (63) , 40020-40027
Open AccessSynthesis of zinc-based acrylate copolymers and their marine antifouling application
Marine fouling organisms have caused inconvenience to humans for a long time owing to their high vitality and great destructiveness.
- Top Cited Papers
- 14 March 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (12) , 11106-11115
Fabrication of ZIF-8@SiO2 Micro/Nano Hierarchical Superhydrophobic Surface on AZ31 Magnesium Alloy with Impressive Corrosion Resistance and Abrasion Resistance
Superhydrophobic coatings are highly promising for protecting material surfaces and for wide applications. In this study, superhydrophobic composites, comprising a rhombic-dodecahedral zeolitic imidazolate framework (ZIF-8@SiO2), have been manufactured onto AZ31 magnesium alloy via chemical etching and dip-coating methods to enhance stability and corrosion resistance. Herein, we report on a simple strategy to modify hydrophobic hexadecyltrimethoxysilan (HDTMS) on ZIF-8@SiO2 to significantly improve the property of repelling water. We show that various liquids can be stable on its surface and maintain a contact angle higher than 150°. The morphologies and chemical composition were characterized by means of scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FI-IR). In addition, the anticorrosion and antiattrition properties of the film were assessed by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization and HT, respectively. Such a coating shows promising potential as a material for large-scale fabrication.
- 14 March 2017
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (12) , 11106-11115
Top Cited PapersFabrication of ZIF-8@SiO2 Micro/Nano Hierarchical Superhydrophobic Surface on AZ31 Magnesium Alloy with Impressive Corrosion Resistance and Abrasion Resistance
Superhydrophobic coatings are highly promising for protecting material surfaces and for wide applications. In this study, superhydrophobic composites, comprising a rhombic-dodecahedral zeolitic imidazolate framework (ZIF-8@SiO2), have been manufactured onto AZ31 magnesium alloy via chemical etching and dip-coating methods to enhance stability and corrosion resistance. Herein, we report on a simple strategy to modify hydrophobic hexadecyltrimethoxysilan (HDTMS) on ZIF-8@SiO2 to significantly improve the property of repelling water. We show that various liquids can be stable on its surface and maintain a contact angle higher than 150°. The morphologies and chemical composition were characterized by means of scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FI-IR). In addition, the anticorrosion and antiattrition properties of the film were assessed by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization and HT, respectively. Such a coating shows promising potential as a material for large-scale fabrication.
- 27 January 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (17) , 13858-13866
Synthesis of hybrid zinc/silyl acrylate copolymers and their surface properties in the microfouling stage
Development of an environmentally friendly and efficient marine antifouling coating is a central goal in marine antifouling. In this study, a series of novel hybrid zinc/silyl acrylate copolymers (Zn/Si-acrylate copolymers) composed of tri(isopropyl)silyl acrylate (TIPSA), zinc-2-ethylhexanoate methacrylate (Zn-monomer), ethyl acrylate and methyl methacrylate were synthesized and their surface compositions, thermal degradation and hydrolysis properties were investigated. After being immersed in seawater, the hydrolysis of TIPSA and Zn-monomer could lead to a gradual self-peeling of the Zn/Si-acrylate surfaces, which was controlled by the ratio of TIPSA to Zn-monomer. The Zn/Si-acrylate copolymers with high Zn-monomer content showed excellent performance in the resistance of diatom Phaeodactylum tricornutum (P. tricornutum) growth on the Zn/Si-acrylate films. Both the self-peeling and release of zinc compounds lead to antifouling properties, which demonstrated that Zn/Si-acrylate copolymers were an effective resin for marine antifouling in static or low flow conditions.
- 27 January 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (17) , 13858-13866
Synthesis of hybrid zinc/silyl acrylate copolymers and their surface properties in the microfouling stage
Development of an environmentally friendly and efficient marine antifouling coating is a central goal in marine antifouling. In this study, a series of novel hybrid zinc/silyl acrylate copolymers (Zn/Si-acrylate copolymers) composed of tri(isopropyl)silyl acrylate (TIPSA), zinc-2-ethylhexanoate methacrylate (Zn-monomer), ethyl acrylate and methyl methacrylate were synthesized and their surface compositions, thermal degradation and hydrolysis properties were investigated. After being immersed in seawater, the hydrolysis of TIPSA and Zn-monomer could lead to a gradual self-peeling of the Zn/Si-acrylate surfaces, which was controlled by the ratio of TIPSA to Zn-monomer. The Zn/Si-acrylate copolymers with high Zn-monomer content showed excellent performance in the resistance of diatom Phaeodactylum tricornutum (P. tricornutum) growth on the Zn/Si-acrylate films. Both the self-peeling and release of zinc compounds lead to antifouling properties, which demonstrated that Zn/Si-acrylate copolymers were an effective resin for marine antifouling in static or low flow conditions.
- 17 August 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (86) , 70080-70085
Multiple sheet-layered super slippery surfaces based on anodic aluminium oxide and its anticorrosion property
A key challenge for this paper is to discuss the effects of porosity on the properties of substrates. Co3O4grown on AAO super slippery surfaces with high porosity possessed good anticorrosion properties and super slippery properties by comparison.
- 17 August 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5 (86) , 70080-70085
Multiple sheet-layered super slippery surfaces based on anodic aluminium oxide and its anticorrosion property
A key challenge for this paper is to discuss the effects of porosity on the properties of substrates. Co3O4grown on AAO super slippery surfaces with high porosity possessed good anticorrosion properties and super slippery properties by comparison.
- Open Access
- 1 December 2008
- Published by Elsevier in Journal of Biological Chemistry
- Vol. 283 (50) , 34773-34784
Sequential Action of ATP-dependent Subunit Conformational Change and Interaction between Helical Protrusions in the Closure of the Built-in Lid of Group II Chaperonins
- 1 December 2008
- Published by Elsevier in Journal of Biological Chemistry
- Vol. 283 (50) , 34773-34784
Open AccessSequential Action of ATP-dependent Subunit Conformational Change and Interaction between Helical Protrusions in the Closure of the Built-in Lid of Group II Chaperonins