Abhijit Krishna Adhikari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Abhijit Krishna Adhikari has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
Kuen-Song Lin
11 shared publications- Chao-Lung Chiang
Material Science Group, Scientific Research Division, National Synchrotron Radiation Research Center, Hsinchu 30076, Taiwan
4 shared publications - Kuen-Song Lin
Department of Chemical Engineering and Materials Science/Environmental Technology Research Center, Yuan Ze University, Chung-Li District, Taoyuan City, 32003, Taiwan
3 shared publications Mu-Ting Tu
3 shared publicationsChieh-Hung Wang
2 shared publicationsKai-Che Chang
2 shared publications
Latest Publications
- 1 August 2016
- Published by American Scientific Publishers in Nanoscience and Nanotechnology Letters
- Vol. 8 (8) , 621-627
Acid-Catalyzed Synthesis and CO2 Adsorption of Cu and Cu-Zn Bimetallic Imidazolate Frameworks
- 1 August 2016
- Published by American Scientific Publishers in Nanoscience and Nanotechnology Letters
- Vol. 8 (8) , 621-627
Acid-Catalyzed Synthesis and CO2 Adsorption of Cu and Cu-Zn Bimetallic Imidazolate Frameworks
- 1 June 2016
- Published by Elsevier in Journal of the Taiwan Institute of Chemical Engineers
- Vol. 63, 463-472
Hydrogen storage capacity enhancement of MIL-53(Cr) by Pd loaded activated carbon doping
- 1 June 2016
- Published by Elsevier in Journal of the Taiwan Institute of Chemical Engineers
- Vol. 63, 463-472
Hydrogen storage capacity enhancement of MIL-53(Cr) by Pd loaded activated carbon doping
- 1 January 2016
- Published by Elsevier in Chemical Engineering Journal
- Vol. 284, 1348-1360
Improving CO2 adsorption capacities and CO2/N2 separation efficiencies of MOF-74(Ni, Co) by doping palladium-containing activated carbon
- 1 January 2016
- Published by Elsevier in Chemical Engineering Journal
- Vol. 284, 1348-1360
Improving CO2 adsorption capacities and CO2/N2 separation efficiencies of MOF-74(Ni, Co) by doping palladium-containing activated carbon
- 13 November 2014
- Published by Springer Nature in Research on Chemical Intermediates
- Vol. 41 (10) , 7655-7667
Improved hydrogen storage capacity by hydrogen spillover and fine structural characterization of MIL-100 metal organic frameworks
- 13 November 2014
- Published by Springer Nature in Research on Chemical Intermediates
- Vol. 41 (10) , 7655-7667
Improved hydrogen storage capacity by hydrogen spillover and fine structural characterization of MIL-100 metal organic frameworks
- 1 April 2014
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 14 (4) , 2700-2708
Synthesis, Characterization, and Hydrogen Storage Enhancement of M2(BDC)2dabco with Palladium-Doped Activated Carbon
Two bi-organic type metal organic frameworks (MOFs) such as Co2(BDC)2dabco and Zn2(BDC)2 dabco have been synthesized by hydrothermal method and characterized along with hydrogen adsorption. The hydrogen adsorption capacity of these MOFs was increased after doping by palladium-activated carbon. Co2(BDC)2dabco has cracked and folded thin film like surface while Zn2(BDC)2dabco has a brick-typed cubic structure with particle size about 10∼15 μm identified by FE-SEM. The XRD patterns represents that both MOFs have the well crystalline structure. Nitrogen adsorption isotherms show that both structures have Type I adsorption isotherm with the BET specific surface area of 1,390 and 1,433 m2 g−1 for Co2(BDC)2dabco and Zn2(BDC)2dabco, respectively. Pristine Co2(BDC)2dabco and Zn2(BDC)2dabco can store about 0.22 and 0.25 wt.% of H2 measured at 298 K and 32 bar. This capacity was greatly enhanced by doping palladium-activated carbon to 0.31 and 0.41 wt.%, respectively. Moreover, both structures were also characterized by XANES/EXAFS. EXAFS spectra indicate that Co2(BDC)2dabco has the Co—O bond distance of 2.030 Å with the coordination number of 4.2 while Zn2(BDC)2dabco has 2.015 Å bond distance of Zn—O with the coordination number of 3.4.
- 1 April 2014
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 14 (4) , 2700-2708
Synthesis, Characterization, and Hydrogen Storage Enhancement of M2(BDC)2dabco with Palladium-Doped Activated Carbon
Two bi-organic type metal organic frameworks (MOFs) such as Co2(BDC)2dabco and Zn2(BDC)2 dabco have been synthesized by hydrothermal method and characterized along with hydrogen adsorption. The hydrogen adsorption capacity of these MOFs was increased after doping by palladium-activated carbon. Co2(BDC)2dabco has cracked and folded thin film like surface while Zn2(BDC)2dabco has a brick-typed cubic structure with particle size about 10∼15 μm identified by FE-SEM. The XRD patterns represents that both MOFs have the well crystalline structure. Nitrogen adsorption isotherms show that both structures have Type I adsorption isotherm with the BET specific surface area of 1,390 and 1,433 m2 g−1 for Co2(BDC)2dabco and Zn2(BDC)2dabco, respectively. Pristine Co2(BDC)2dabco and Zn2(BDC)2dabco can store about 0.22 and 0.25 wt.% of H2 measured at 298 K and 32 bar. This capacity was greatly enhanced by doping palladium-activated carbon to 0.31 and 0.41 wt.%, respectively. Moreover, both structures were also characterized by XANES/EXAFS. EXAFS spectra indicate that Co2(BDC)2dabco has the Co—O bond distance of 2.030 Å with the coordination number of 4.2 while Zn2(BDC)2dabco has 2.015 Å bond distance of Zn—O with the coordination number of 3.4.
- 1 April 2014
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 14 (4) , 2709-2717
Synthesis, Fine Structural Characterization, and CO2 Adsorption Capacity of Metal Organic Frameworks-74
Two metal organic frameworks of MOF-74 group (zinc and copper-based) were successfully synthesized, characterized, and evaluated for CO2 adsorption. The both samples such as MOF-74(Zn) and MOF-74(Cu) were characterized with FE-SEM for morphology and particle size, XRD patterns for phase structure, FTIR for organic functional groups, nitrogen adsorption for pore textural properties, and X-ray absorption spectroscopy for fine structural parameters and oxidation states of central metal atoms. CO2 adsorption isotherms of MOF-74 samples were measured in a volumetric adsorption unit at 273 K and pressure up to 1.1 bar. The MOF-74(Zn) and MOF-74(Cu) adsorbents have the pore widths of 8.58 and 8.04 Å with the BET specific surface areas of 1,474 and 1,345 m2 g−1, respectively. CO2 adsorption capacities of MOF-74(Zn) and MOF-74(Cu) were 4.10 and 3.38 mmol · g−1, respectively measured at 273 K and 1.1 bar. The oxidation state of central atoms in MOF-74(Zn) was Zn(II) confirmed by XANES spectra while MOF-74(Cu) was composed of Cu(I) and Cu(II) central atoms. The bond distances of Zn—O and Cu—O were 1.98 and 1.94 Å, respectively.
- 1 April 2014
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 14 (4) , 2709-2717
Synthesis, Fine Structural Characterization, and CO2 Adsorption Capacity of Metal Organic Frameworks-74
Two metal organic frameworks of MOF-74 group (zinc and copper-based) were successfully synthesized, characterized, and evaluated for CO2 adsorption. The both samples such as MOF-74(Zn) and MOF-74(Cu) were characterized with FE-SEM for morphology and particle size, XRD patterns for phase structure, FTIR for organic functional groups, nitrogen adsorption for pore textural properties, and X-ray absorption spectroscopy for fine structural parameters and oxidation states of central metal atoms. CO2 adsorption isotherms of MOF-74 samples were measured in a volumetric adsorption unit at 273 K and pressure up to 1.1 bar. The MOF-74(Zn) and MOF-74(Cu) adsorbents have the pore widths of 8.58 and 8.04 Å with the BET specific surface areas of 1,474 and 1,345 m2 g−1, respectively. CO2 adsorption capacities of MOF-74(Zn) and MOF-74(Cu) were 4.10 and 3.38 mmol · g−1, respectively measured at 273 K and 1.1 bar. The oxidation state of central atoms in MOF-74(Zn) was Zn(II) confirmed by XANES spectra while MOF-74(Cu) was composed of Cu(I) and Cu(II) central atoms. The bond distances of Zn—O and Cu—O were 1.98 and 1.94 Å, respectively.
- 1 April 2013
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 13 (4) , 2549-2556
Preparation, Characterization, and Hydrogen Storage Capacity of MIL-53 Metal-Organic Frameworks
Metal organic frameworks (MOFs) are considered as most promising candidate for hydrogen storage material for practical application. MIL-53(Cr) MOFs were synthesized from Cr(NO3)3·9H2O combined with terephthalic acid organic linker. MIL-53(Cr) MOFs are octahedral in shape and the particle size was around 10 μm identified by FE-SEM. The cleaning of the MOFs crystals with different solvents at different warm temperature were found effective and approved to increase the specific surface area and porosity of MIL-53(Cr) MOFs. The XRD patterns represented that MIL- 53(Cr) MOFs had well crystalline structures. Nitrogen adsorption isotherms show that Mil-53(Cr) has approximately type-I isotherm with a highest BET specific surface area of 1946 m2 g−1 after treated with hot methanol. Hydrogen adsorption study shows that this material can store 0.45 wt.% of H2 measured at 303 K and 32 bar. The pre-edge XANES spectra confirm the existence of Cr(III) in crystalline framework of MIL-53(Cr) and the sharp feature at 6007 eV in XANES spectra represents the dipole-allowed electron transition from 1s to 4p xy. In addition, EXAFS spectra indicate that MIL-53(Cr) metal organic frameworks structure has the Cr—O bond distance of 1.96 Å with a coordination number of 5.4.
- 1 April 2013
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 13 (4) , 2549-2556
Preparation, Characterization, and Hydrogen Storage Capacity of MIL-53 Metal-Organic Frameworks
Metal organic frameworks (MOFs) are considered as most promising candidate for hydrogen storage material for practical application. MIL-53(Cr) MOFs were synthesized from Cr(NO3)3·9H2O combined with terephthalic acid organic linker. MIL-53(Cr) MOFs are octahedral in shape and the particle size was around 10 μm identified by FE-SEM. The cleaning of the MOFs crystals with different solvents at different warm temperature were found effective and approved to increase the specific surface area and porosity of MIL-53(Cr) MOFs. The XRD patterns represented that MIL- 53(Cr) MOFs had well crystalline structures. Nitrogen adsorption isotherms show that Mil-53(Cr) has approximately type-I isotherm with a highest BET specific surface area of 1946 m2 g−1 after treated with hot methanol. Hydrogen adsorption study shows that this material can store 0.45 wt.% of H2 measured at 303 K and 32 bar. The pre-edge XANES spectra confirm the existence of Cr(III) in crystalline framework of MIL-53(Cr) and the sharp feature at 6007 eV in XANES spectra represents the dipole-allowed electron transition from 1s to 4p xy. In addition, EXAFS spectra indicate that MIL-53(Cr) metal organic frameworks structure has the Cr—O bond distance of 1.96 Å with a coordination number of 5.4.
- 1 April 2013
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 13 (4) , 2538-2548
Synthesis and Characterization of Nickel and Zinc Ferrite Nanocatalysts for Decomposition of CO2 Greenhouse Effect Gas
The decomposition of CO2 over oxygen deficient nickel ferrite nanoparticles (NFNs) and zinc ferrite nanoparticles (ZFNs) at 573 K was studied. The oxidation states with fine structure of Fe/Ni or Fe/Zn species were also measured in NFNs and ZFNs catalysts, respectively. Oxygen deficiency of catalysts was obtained by reduction in hydrogen. Decomposition of CO2 into carbon and oxygen has been carried out within few minutes when it comes into contact with oxygen deficient catalysts through incorporation of oxygen into ferrite nanoparticles. Oxygen and carbon rather than CO were produced in the decomposition process. The complete decomposition of CO2 was possible because of higher degree of oxygen deficiency andsurface-to-volume ratio of the catalysts. The pre-edge XANES spectra of Fe species in both catalysts exhibit an absorbance feature at 7114 eV for the 1s to 3d transition which is forbidden by the selection rule in case of perfect octahedral symmetry. The EXAFS data showed that the NFNs had two central Fe atoms coordinated by primarily Fe-O and Fe-Fe with bond distances of 1.871 and 3.051 angstroms, respectively. In case of ZFNs these values are 1.889 and 3.062 A, respectively. Methane gas was produced during the reactivation of NFNs by flowing hydrogen gas. Decomposition of CO2, moreover, recovery of valuable methane using heat energy of offgas produced from power generation plant or steel industry is an appealing alternative for energy recovery.
- 1 April 2013
- Published by American Scientific Publishers in Journal of Nanoscience and Nanotechnology
- Vol. 13 (4) , 2538-2548
Synthesis and Characterization of Nickel and Zinc Ferrite Nanocatalysts for Decomposition of CO2 Greenhouse Effect Gas
The decomposition of CO2 over oxygen deficient nickel ferrite nanoparticles (NFNs) and zinc ferrite nanoparticles (ZFNs) at 573 K was studied. The oxidation states with fine structure of Fe/Ni or Fe/Zn species were also measured in NFNs and ZFNs catalysts, respectively. Oxygen deficiency of catalysts was obtained by reduction in hydrogen. Decomposition of CO2 into carbon and oxygen has been carried out within few minutes when it comes into contact with oxygen deficient catalysts through incorporation of oxygen into ferrite nanoparticles. Oxygen and carbon rather than CO were produced in the decomposition process. The complete decomposition of CO2 was possible because of higher degree of oxygen deficiency andsurface-to-volume ratio of the catalysts. The pre-edge XANES spectra of Fe species in both catalysts exhibit an absorbance feature at 7114 eV for the 1s to 3d transition which is forbidden by the selection rule in case of perfect octahedral symmetry. The EXAFS data showed that the NFNs had two central Fe atoms coordinated by primarily Fe-O and Fe-Fe with bond distances of 1.871 and 3.051 angstroms, respectively. In case of ZFNs these values are 1.889 and 3.062 A, respectively. Methane gas was produced during the reactivation of NFNs by flowing hydrogen gas. Decomposition of CO2, moreover, recovery of valuable methane using heat energy of offgas produced from power generation plant or steel industry is an appealing alternative for energy recovery.
- 12 October 2012
- Published by Springer Nature in Adsorption
- Vol. 18 (5-6) , 483-491
Synthesis, characterization, and hydrogen storage study by hydrogen spillover of MIL-101 metal organic frameworks
- 12 October 2012
- Published by Springer Nature in Adsorption
- Vol. 18 (5-6) , 483-491
Synthesis, characterization, and hydrogen storage study by hydrogen spillover of MIL-101 metal organic frameworks
- Top Cited Papers
- 1 September 2012
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 37 (18) , 13865-13871
Synthesis and characterization of porous HKUST-1 metal organic frameworks for hydrogen storage
- 1 September 2012
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 37 (18) , 13865-13871
Top Cited PapersSynthesis and characterization of porous HKUST-1 metal organic frameworks for hydrogen storage