RTR. A. Tomakova

R. A. Tomakova

*This is an algorithmically generated author record based on publicly available information.

R. A. Tomakova has a total of 40 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Artificial intelligence in higher education: awareness of risks

    by R. A. Tomakova, V. I. Tomakov

    The purpose of the research is to identify and classify the risks associated with the introduction of artificial intelli gence in the field of education. Methods . General scientific research methods were used: analysis and synthesis, induction, deduction, concretiza tion, classification. Comparative and systematic approaches were used to identify cause-and-effect relationships. The classification of risks is based on the principles of unity of foundation, mutual exclusion, systemic completeness, rele vance and adaptability. Results . The potential risks of using artificial intelligence technologies in the educational sphere are diverse and cov er different levels of interaction between students, teachers and the education system as a whole. Potential risks are identified and characterized: technological, ethical, psychological, cognitive, social, pedagogical, legal and regulatory. Recognizing the risks will make it possible to use the potential of artificial intelligence to improve the quality of educa tion, without forgetting the fundamental principles of learning and personal development of students. The classifica tion of potential risks will allow taking into account the balance between the use of artificial intelligence and the preservation of the human factor in education, and developing strategies to minimize negative consequences in the educational process. Conclusion . To minimize the negative consequences of the use of artificial intelligence in education, comprehensive measures are needed, including the development of appropriate regulations, the improvement of educational pro grams, the development of new methods and pedagogical technologies, the retraining of teachers and the provision of modern technical infrastructure. The best results from the introduction of artificial intelligence will be achieved if an educational environment is formed that preserves the value of traditional teaching under the guidance of a teacher, but at the same time actively uses and integrates the capabilities of artificial intelligence.


  • Open Access

    Intelligent system for optimization of production activities at a medium and large enterprise based on ais

    by D. A. Karakchiev, K. N. Shevchenko, R. A. Tomakova

    The purpose of the research is to develop a universal system for optimizing the production process, performing the function of equipment monitoring, fault notification, production control and analytical function for medium and large industrial enterprises. Methods . The prospects of integrating automated information systems and enterprise resource planning (ERP) into a production optimization system are considered. This approach involves the creation of a common multi-module system that allows continuous monitoring of equipment, recording the status of both work and downtime, creating and conducting production planning of resources, conducting complex analytics, reducing response time to calls from repair services, and improving production efficiency and quality. To solve this problem, various sources of initial in formation are analyzed, including data on production activities, static and dynamic data on the work of various departments in the field of logistics and analytics. Using the enterprise resource planning system allows you to integrate and analyze this data in real time, ensuring the effectiveness of production control and analytics in the enterprise. Results . The presented production optimization system is based on an improved version of an automated information system, which in the future involves development in the logistics and analytical industries. In the process of working with the collected data, work is analyzed, planned and monitored, which significantly reduces the number of unnecessary calculations and, as a result, minimizes production costs and staffing. Conclusion . The use of a monitoring and resource planning system in production infrastructures opens up opportunities for increasing transparency, profitability and management for businesses

  • Designing the core of an information system based on a workflow engine: a comparative analysis of approaches

    by A. A. Pinaev, R. A. Tomakova, D. K. Reutov, D. A. Fomin

    The purpose of the research is to develop the core architecture of an information system based on the open-source workflow engine Elsa Workflows, focused on the automation of business processes in small and medium-sized businesses. Special attention is paid to the creation of a flexible, scalable and cost-effective information system. Methods . The paper uses system analysis methods to conduct a comparative analysis of existing solutions such as Camunda, ELMA BPM. The functional and non-functional requirements for the information system are formulated and substantiated. An algorithm for the functioning of the core has been developed, and a prototype architecture using technology has been implemented.NET, PostgreSQL, and React. Simulation modeling was carried out, experiments were conducted. Results . A modular system architecture is proposed, including subsystems for task management, monitoring, notifications, integration, and analytics. Elsa Workflows is a lightweight, modular and freely distributed engine for the .NET platform. Its key features are support for code and declarative implementation of processes, visual editing, built-in support for REST API and microservice architecture. Special attention is paid to the flexibility of defining processes: they can be executed both in C# (code-first approach), and in a declarative form – via JSON or YAML. The scheme of the algorithm for the functioning of the task's life cycle with error handling mechanisms, post-processing and information archiving capabilities is implemented. The possibility of creating an effective workflow core on the platform has been proven.NET, characterized by a low cost of ownership and a high degree of adaptability. Conclusion . Using the Elsa Workflows open-source workflow engine allows you to create a modern information system core that combines flexibility, productivity, and compliance with import substitution requirements. The proposed solution can serve as a basis for digitalization of poorly automated industries and contribute to improving the operational efficiency of enterprises.

  • Open Access

    Hybrid genetic algorithm for identifying parameters of nonlinear models with constraints in biomaterial impedance problems

    by Н. А. Корсунский, R. A. Tomakova, V. A. Starkov

    Purpose of research . The research objective is to evaluate the effectiveness of a hybrid algorithm combining a genetic algorithm (GA) and a least squares method (LSM) designed to identify bioimpedance parameters in the tasks of pulmonary pathology diagnostics. The main attention is paid to improving the measurement accuracy (the norm of the residual ≤ 0.09) and developing recommendations for integrating the method into software and. Methods . The study was performed on the basis of the E20-10 module ("L-Card"), which generates sinusoidal signals using ECG electrodes. to minimize parasitic containers. The bioimpedance parameters were identified using a hybrid algorithm in which genetic search was combined with the least squares method, including regularization (λ=0.1). Data analysis was carried out using the Cole method, and measurement control was carried out through software implemented in Delphi, which provided real—time signal processing. Results . Based on the E20-10 module and a complex developed for measurement and biological analysis. The average distance between the model data and Xperiment is 4% (standard deviation of 0.09). The REXTRA identification error does not exceed 2.1%, which confirms the reliability of the method in clinical settings. Conclusion . The study has confirmed that the hybrid algorithm provides high accuracy (residual norm of 0.09) and the ability to regenerate when determining biological parameters. Analysis of the characteristics of the amplitude and frequency phase, which allowed the development of classifications that can automate the diagnosis of lung diseases. The results showed that the potential of the method is to create a medical diagnostic package that can work in real time (1 sec per analysis). However, additional research on living subjects is required for clinical implementation, as well as the adaptation of algorithms for various diseases.

  • Development of a software and information system for testing the emotional sphere of a person

    by R. A. Tomakova, A. V. Malyshev, A. V. Bykov

    The purpose of the research is to develop a software and information system for automating the assessment of cognitive abilities of employees and candidates using scientifically validated testing methodologies in HR departments. Methods . To implement the software system, the C# programming language was used with the ASP.NET Core framework, along with JavaScript and the React library. For storing data on users, testing results, and reports, the MSSQL database was utilized. The following scientifically validated methodologies were employed: "Schulte Tables" (G. Schulte) to measure attention concentration, "Pair Word Memorization Method" (H. Ebbinghaus) to assess shortterm memory, "Raven's Progressive Matrices" (J. Raven) to analyze logical thinking, "Holmes and Rahe Stress Scale" (T. Holmes, R. Rahe) to evaluate stress resilience, and "Belbin's Methodology" (R. M. Belbin) to determine team roles. The system uses test results as input data, which are subsequently analyzed to generate reports and provide recommendations. Results . During the development, a software and information system was created to automate the process of assessing cognitive abilities of employees and candidates. Interfaces for users and HR specialists were implemented, providing access to tests, results, and analytics. Testing on a sample of company employees demonstrated a diagnostic accuracy level of 93%. The system offers personalized and group analysis capabilities, including generating recommendations for skill development and building summary reports, making it an effective tool for HR departments. The testing results showed that the developed software fully meets functional requirements and is ready for use. Conclusion. The developed software and information system enables the automation of cognitive testing processes for employees and candidates, providing HR departments with a convenient tool for evaluating key skills and developing development plans. The system ensures high diagnostic accuracy and saves specialists’ time through automated data processing. Future development prospects include expanding functionality, adding new testing methodologies, implementing adaptive algorithms for dynamically adjusting task complexity, and integrating with HRM systems to optimize personnel management processes.

  • Open Access

    Interactive lecture-conference in the training of IT specialists: methodological features and educational effec

    by R. A. Tomakova, A. N. Brezhneva

    The relevance of the research is determined by the requirements for improving the quality of training of IT specialists within the framework of the implementation of the national project «Personnel». The successful implementation of the national project is based on an integrated approach to the qualitative transformation of the higher education system, including the introduction of innovative teaching methods.The purpose of the study was to analyze the advantages and develop methods for preparing and conducting a lecture-conference, as well as to study the factors contributing to the successful implementation of an interactive lecture in the educational process in the training of IT specialists.Methods. The following methods are used: study and analysis of theoretical and methodological literature on the research topic; methodological design; observation, questioning, expert assessment.Results. During the research, the advantages of the lecture-conference were identified, a methodology was developed that includes both general and specific goals of the lecture-conference, the content of the training, as well as the educational material itself and the technological process covering the organization of educational activities, the methods and forms of work used by both students and teachers, including management the processes of preparation, presentation and assimilation of the material, diagnosis of the results of the educational process. The analysis of the factors contributing to the successful implementation of an interactive lecture in the educational process is carried out. This made it possible to identify both the opportunities and potential difficulties that teachers may face when implementing this class format. Based on the results obtained, the practice of using this technique in the preparation of bachelors of engineering and technical profile was implemented.Conclusion. The educational effect of an interactive lecture-conference is achieved due to the ability to combine the advantages of a traditional lecture and interactive forms of learning, which allows for a deeper understanding of the educational material due to its informative content, and to make the academic discipline more accessible to various categories of students. The lecture-conference allows you to systematically present theoretical knowledge, stimulates critical thinking, promotes the development of communication skills and the ability to work in a team. The educational effect of the lecture-conference is also manifested in its ability to stimulate interest in the subject, motivate students to study the material independently and develop a range of competencies.

  • Open Access

    Recommendation system for anti-procrastination tracking based on ChatGPT and personal data

    by A. M. Sidorov, R. A. Tomakova, D. K. Reutov

    The purpose of the research is to analyze the potential of integrating the ChatGPT language model into a personalized recommendation system aimed at reducing procrastination. The focus is on the concept of a digital assistant capable of adaptively responding to users’ behavioral patterns, maintaining attention, and fostering self-discipline in the context of information overload and constant digital distractions. Methods. The system is based on the ChatGPT language model integrated with user activity trackers. It is designed to collect and analyze data such as task schedules, productivity levels, mood, task-switching frequency, and physiological parameters (e.g., heart rate, stress level, sleep quality) where wearable devices are available. The system architecture includes a contextual layer for data aggregation and a dialogue generation module for personalized recommendations. Recommendations are stratified into operational (immediate actions), tactical (daily planning), and motivational (focus and resilience support) types. The system also provides mechanisms for adapting recommendations based on behavioral context, temporal patterns, and user state. Results. The paper describes the functional components of the proposed architecture, key user interaction scenarios, and examples of dialogue interventions. Interface solutions for visualizing progress in productivity and self-regulation are discussed. The feasibility of using a language model as an empathetic digital coach that can respond to users’ dynamic states and provide supportive guidance for overcoming procrastination is substantiated. Conclusion. The proposed concept demonstrates the potential of ChatGPT as a tool for digital well-being. Personalized interaction based on the analysis of user behavior and states may serve as a foundation for the development of effective digital self-regulation systems. Future research directions include the implementation of predictive logic, integration of biometric tracking, and expansion of the behavioral model.

  • Open Access

    Methods of telematics data analysis for decision support systems for optimal unmanned vehicle control

    by R. A. Khodukin, R. A. Tomakova, A. V. Malyshev

    The purpose of the research is purpose of the study. The analysis of modern solutions aimed at supporting decision-making on optimal driving within the framework of the Connected Car concept, as well as systematize the main methods of using telematics data and architecture of similar systems. Methods. Methods. The study is based on an analysis of domestic and foreign publications, patents and practical implementations in the field of Connected Cars, as well as examples of the introduction of telematics platforms in the automotive industry. Classical statistical methods, machine learning algorithms, and big data streaming tools are considered. Special attention is paid to scalability, standardization and quality of telematics information. Results. It has been established that most modern systems rely on basic statistical and machine learning methods (classification, clustering, regression models) to analyze large amounts of data on vehicle movement. However, unified approaches to the integration of these methods into the integrated architecture of decision support systems have not yet been formed. Hybrid approaches combining statistical methods, ML algorithms, and Big Data technologies demonstrate the greatest effectiveness. Their widespread adoption is hampered by the lack of uniform standards for telematics data exchange, the difficulties of reliable data storage, and the need to filter noise and omissions. Based on the review, the advantages and disadvantages of various methods are identified, as well as the requirements for the architecture of the DSS for the Connected Car are formulated. Conclusion. The review confirms the high demand for flexible, scalable solutions capable of processing telematics data in real time and taking into account individual driving characteristics. The further development of such systems is closely related to the unification of telematics information formats, increased security (both in terms of data protection and in the field of traffic), as well as expanding the range of analyzed sources (road infrastructure, weather conditions, smart city ecosystems, etc.) to improve the accuracy of recommendations and optimize driving.


  • Open Access

    Methods and algorithms for identifying special points in images obtained from an onboard photo video recorder of an unmanned aerial vehicle

    by I. N. Gorbachev, R. A. Tomakova, S. V. Korobkov

    The purpose of the research is to develop methods for controlling unmanned aerial vehicles based on the analysis of data coming from a video stream.Methods. An unmanned aerial vehicle can lose contact with the satellite navigation system, so the task of ensuring its orientation using an onboard photo video recorder with onboard data processing becomes relevant. For this purpose, special points on the terrain are used, the identification of which in the picture allows restoring the orientation of the aircraft. To search for special points of the blob type in the picture, a method is proposed for transforming the original image into a criterion image, after threshold processing of which the coordinates of the blobs are obtained. A method has been developed for transforming the original image into a criterion image, which consists in determining correlation images. For each correlation image, a scalar blob identification criterion is determined, which allows determining the coordinates of a special point in pictures obtained from an onboard photo video recorder.Results. To improve the accuracy of determining the coordinates of blobs in pictures, an aggregated blob of three special points was used. An algorithm for two-stage identification of coordinates of an aggregated blob is investigated. At the first stage, the coordinates of special points closest to the coordinates of the vertices of the aggregated blob are determined, and at the second stage, the coordinates of the vertices of the triangle whose center of gravity is closest to the center of gravity of the aggregated blob are determined. The algorithms for searching for special points have shown their efficiency at a high level of interference modeled in the image by means of Gaussian noise, as well as interference associated with the deviation of the aircraft from the specified course.Conclusion. The formation of an aggregated blob with subsequent multi-stage identification allows for increasing the accuracy of determining its coordinates, and also makes it possible to record the deviation from the course of the aircraft in the area of two adjacent images and introduce appropriate corrections into the navigation system.

  • Open Access

    Formation of informative characteristics of biomaterial impedance for algorithms of software and hardware complexes

    by Н. А. Корсунский, R. A. Tomakova, A. V. Brezhnev

    The purpose of the research is to evaluate the accuracy and reliability of methods for measuring the impedance of a biological material and to develop recommendations for improving algorithms for the development of software and hardware complexes in the field of biomedical diagnostics. Considerable attention is paid to the analysis of data obtained in Vivo.Methods. 400 measurements were performed on a group of 20 volunteers using electrical thermal effects to obtain amplitude-phase frequency characteristics of the impedance of biological tissues. During the experiment, the Cole method was used to determine coefficients reflecting the key parameters of the test tissue and its impedance characteristics. To generate the test signals, sequences of single-frequency sinusoidal signals were used, controlled by software on the E20-10 platform, specially designed for digitizing data and analyzing transients in living tissues.Results. Based on the E20-10 data acquisition system manufactured by L-Card CJSC, a complex for receiving and processing impedance data was developed, including software implemented in the Delphi language designed to generate and process test signals. The in Vivo results showed average discrepancies within 4% between the measured and expected values, which confirms the high accuracy and reliability of the proposed approach to measuring the resonance of biological tissues.Conclusion. The implementation of software for measuring biomaterial impedance using the developed algorithms and applied amplitude-phase frequency characteristics provides a more accurate assessment of the dissipative properties of biological tissues. Data analysis has shown the possibilities and prospects of developing high-precision classifiers for a decision support system for early diagnosis of medical risks. These classifiers can be especially useful for identifying predisposition to lung diseases such as pneumonia and tuberculosis. Further research in this field can lead to significant progress in the creation of effective software and hardware complexes for biomedical diagnostics, contributing to the improvement of the prevention and treatment of various pathologies, taking into account the individual characteristics of the patien