Brody R. Clark
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Brody R. Clark has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Chaminda Gallage
School of Civil and Environmental Engineering, Queensland University of Technology, Brisbane, Australia
2 shared publications John Yeaman
Retired, Professor, Science, Health, Education and Engineering Faculty, Univ. of the Sunshine Coast, Sippy Downs, QLD 4556, Australia
1 shared publication- Luisa Piacere
Undergraduate, Faculty of Science and Engineering, Queensland Univ. of Technology, 2 George St., Brisbane, QLD 4001, Australia
1 shared publication
Latest Publications
- 1 March 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 32 (3)
Temperature Variation through Deep Multigrade Asphalt Pavements and Proposed Method for Accounting for Fluctuations
Multigrade bitumen asphalt is a quality asphalt product that is not used in many places globally. Multigrade bitumen is believed to be less sensitive to temperature, which gives it an advantage over conventional binders. Previous testing has shown that asphalt temperature changes greatly with depth, but currently the industry standard is to nominate a single temperature for design. For detailed design of asphalt roads, perhaps asphalt layers should be divided into nominal layer depths and different modulus and fatigue equations/values should be used to reflect the temperatures of each respective layer. Previous laboratory testing conducted on multigrade bitumen asphalt beams under a range of temperatures and loading conditions was analyzed. The samples tested included 0% or 15% recycled asphalt pavement (RAP) to determine the impact of the recycled material on the fatigue life and stiffness of the pavement. This study investigated the temperature susceptibility of multigrade bitumen asphalt pavements compared with that of conventional binders by combining previous testing that included conducting a range of fatigue tests, developing complex modulus master curves for each mix, and a study of how pavement temperature changes through pavement depth. The materials properties were analyzed using the pavement design software. This investigation found that the final design of the pavement is greatly affected by the nominated pavement temperature and respective material properties. This paper outlines a potential revision to the current design approach for asphalt pavements and proposes that further investigation is needed into pavement temperature and its incorporation into design.
- 1 March 2020
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 32 (3)
Temperature Variation through Deep Multigrade Asphalt Pavements and Proposed Method for Accounting for Fluctuations
Multigrade bitumen asphalt is a quality asphalt product that is not used in many places globally. Multigrade bitumen is believed to be less sensitive to temperature, which gives it an advantage over conventional binders. Previous testing has shown that asphalt temperature changes greatly with depth, but currently the industry standard is to nominate a single temperature for design. For detailed design of asphalt roads, perhaps asphalt layers should be divided into nominal layer depths and different modulus and fatigue equations/values should be used to reflect the temperatures of each respective layer. Previous laboratory testing conducted on multigrade bitumen asphalt beams under a range of temperatures and loading conditions was analyzed. The samples tested included 0% or 15% recycled asphalt pavement (RAP) to determine the impact of the recycled material on the fatigue life and stiffness of the pavement. This study investigated the temperature susceptibility of multigrade bitumen asphalt pavements compared with that of conventional binders by combining previous testing that included conducting a range of fatigue tests, developing complex modulus master curves for each mix, and a study of how pavement temperature changes through pavement depth. The materials properties were analyzed using the pavement design software. This investigation found that the final design of the pavement is greatly affected by the nominated pavement temperature and respective material properties. This paper outlines a potential revision to the current design approach for asphalt pavements and proposes that further investigation is needed into pavement temperature and its incorporation into design.
- 1 February 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (2)
Effects of Recycled Asphalt Pavement on the Stiffness and Fatigue Performance of Multigrade Bitumen Asphalt
Recycled asphalt pavement (RAP) has received considerable interest in recent years for economic, environmental, and social reasons, and it is necessary to discover what effect the inclusion of RAP into asphalt layers has on the fatigue life of a pavement. Multigrade bitumen is less sensitive to temperature compared with conventional bitumen; therefore, it is expected that multigrade bitumen asphalt will perform much better than conventional asphalt. It is important to investigate the performance of RAP-added multigrade bitumen asphalt as an innovative pavement material. Therefore, in this study the effects of multigrade bitumen types and the amount of RAP content (e.g., 0 and 15%) on the fatigue life of this innovative pavement material were investigated in the laboratory using a four-point beam fatigue testing apparatus under controlled temperature. The results suggested that multigrade bitumen asphalt with and without RAP has higher fatigue life compared with the conventional bitumen asphalt. Further, it was revealed that the type of multigrade bitumen has significant effects on the fatigue performance of multigrade bitumen asphalt. It was observed that the effect of the RAP on the fatigue performance of multigrade bitumen varies with the type of multigrade bitumen. The study was further expanded to develop a master curve for a given mixture and the master curve can be used to obtain flexural modulus of the mixture at a given temperature and at a given loading frequency. The results show that multigrade bitumen and RAP inclusion can have beneficial effects on pavement design thickness.
- 1 February 2018
- Published by American Society of Civil Engineers (ASCE) in Journal of Materials in Civil Engineering
- Vol. 30 (2)
Effects of Recycled Asphalt Pavement on the Stiffness and Fatigue Performance of Multigrade Bitumen Asphalt
Recycled asphalt pavement (RAP) has received considerable interest in recent years for economic, environmental, and social reasons, and it is necessary to discover what effect the inclusion of RAP into asphalt layers has on the fatigue life of a pavement. Multigrade bitumen is less sensitive to temperature compared with conventional bitumen; therefore, it is expected that multigrade bitumen asphalt will perform much better than conventional asphalt. It is important to investigate the performance of RAP-added multigrade bitumen asphalt as an innovative pavement material. Therefore, in this study the effects of multigrade bitumen types and the amount of RAP content (e.g., 0 and 15%) on the fatigue life of this innovative pavement material were investigated in the laboratory using a four-point beam fatigue testing apparatus under controlled temperature. The results suggested that multigrade bitumen asphalt with and without RAP has higher fatigue life compared with the conventional bitumen asphalt. Further, it was revealed that the type of multigrade bitumen has significant effects on the fatigue performance of multigrade bitumen asphalt. It was observed that the effect of the RAP on the fatigue performance of multigrade bitumen varies with the type of multigrade bitumen. The study was further expanded to develop a master curve for a given mixture and the master curve can be used to obtain flexural modulus of the mixture at a given temperature and at a given loading frequency. The results show that multigrade bitumen and RAP inclusion can have beneficial effects on pavement design thickness.