CCChia-Hung Chen

Chia-Hung Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chia-Hung Chen has a total of 53 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Pipelined Incremental ΔΣ ADC With Residue Harvesting and Noise Penalty Mitigation

    by Shih-Che Kuo, Chia-Hung Chen

    This paper proposes a pipelined incremental ΔΣ analog-to-digital converter (IADC) by cascading two IADCs for sensor system-on-chip whose oversampling ratio (OSR) is constrained by the system clock frequency. The two-stage IADC disrupts the noise accumulation path of four integrations in a 2-2 multi-stage noise shaping (MASH) IADC, reducing the noise penalty from fourth-order to second-order. Consequently, the input sampling capacitor size can be reduced by 42%. And, the digital filter can be simplified significantly to reduce the overall system-level hardware cost. Two identical integrators are alternating- one integrator accumulates the quantization residue, the other one holds the residue to interface the second IADC. When one Nyquist conversion is finished, the residue is harvested by one integrator and these two integrators interchange their roles reciprocally for integration and holding the residue. Additional techniques are proposed to mitigate the circuit non-idealities. The gain self-correction technique eliminates coefficient errors in the first loop, relaxing the matching requirements of the integrator’s coefficient. Furthermore, the dynamically segmented integration combines a static lower-bandwidth amplifier with floating inverter amplifiers (FIAs) to accelerate the slewing. Fabricated in a 0.18 μm process, the prototyped IADC consumes 0.38 mm² and 470 μW under a 1.8-V supply. Clocked at a 1.6-MHz, it achieves a DR / SNDR of 98.4 dB / 95.3 dB over a 20-kHz bandwidth, resulting in FoMS,DR / FoMS,SNDR of 174.7 dB / 171.6 dB. This work validates a high-accuracy solution for low OSR applications while maintaining a competitive energy efficiency.

  • A NS-SAR Assisted CT Incremental ADC With Input Signal Track-and-Reset for Extending Maximum Stable Amplitude

    by Cheng-En Wei, Ching-Ju Lu, Shih-Che Kuo, Ching-Cheng Wang, Che-Wei Hsu, Chia-Hung Chen

    Incremental analog-to-digital converters (IADCs) are well-suited for multiplexing across sensor nodes. Continuous-time (CT) implementations often offer better energy efficiency than switched-capacitor circuits. This paper presents a medium-bandwidth and high-resolution IADC incorporating a second-order CT loop filter and an entirely passive noise-shaping successive approximation-register (SAR) internal quantizer with a direct input feedforward path. The noise-shaping SAR quantizer enhances noise shaping by one additional order. Meanwhile, the direct input feedforward path mitigates the voltage ringing issues that arise when resetting the loop filter during incremental operation, thereby successfully extending the maximum stable amplitude. The proposed hardware prototype is fabricated in $0.18~\mu $ m CMOS technology, occupying an active area of 0.38 mm2. It achieves a peak SNDR of 89.2 dB with an input amplitude of -2 dBFS and a DR of 91.9 dB for 100 kHz signal bandwidth. Operating at a 1.8V supply voltage, the prototype consumes 1.19 mW, resulting in a Schreier FoM of 168.4/171.1 dB.


  • Open Access

    A Review on Sub-0.21-V Ultra-Low-Supply-Voltage Analog-to-Digital Converters

    by Eric Christie, Jared Marchant, Shea Smith, Long Kong, Chia-Hung Chen, Shiuh-Hua Wood Chiang

    Ultra-low-supply-voltage (ULV) analog-to-digital converters (ADCs) operating at 0.21 V or lower are attractive for Internet-of-Things (IoT) and embedded applications due to their extremely low power consumption. This paper surveys state-of-the-art ULV ADCs to evaluate current trends and design strategies. Architectures, circuit implementations, and calibration techniques are analyzed and key trends are identified. Based on the observations, the paper provides recommendations for the circuit designer to make judicious design choices to obtain the desired performance for ULV ADCs. This paper further explores the VCO-based architecture and proposes a new topology to achieve high resolution for ULV ADCs.


  • A Low-Noise Area-Efficient Column-Parallel ADC With an Input Triplet for a 120-dB High Dynamic Range CMOS Image Sensor

    by Pai-Hsiang Hsu, Yueh-Ru Lee, Chia-Hung Chen, Chung-Chih Hung

    This article presents and demonstrates the design of a high dynamic range (HDR) CMOS image sensor (CIS). Detailed operation of various comparator circuits is analyzed. A low-noise, area-efficient, wide-input range comparator is proposed for HDR applications. Based on the analysis, a six-transistor (6T) comparator is proposed with a p-type metal oxide semiconductor (PMOS) input triplet, which effectively increases the input range of a conventional PMOS-input type comparator and compensates the charge injection and kT/C noise introduced from pixels switching between high-conversion-gain (HCG) and low-conversion-gain (LCG) modes. The proposed scheme achieves an extra high dynamic range (DR). A full HD (1920 $\times$ 1080) HDR image sensor with 2.9 $\mu $ m pixel pitches is fabricated in a 55 nm one-ploy five-metal (1P5M) CIS process. The incorporated analog-to-digital conversion (ADC) demonstrates a 12-bit resolution, a noise of 96 $\mu_{\mathrm{VRMS}}$ , a power consumption of 25 $\mu $ W, an area of 2.9 $\times$ 400 $\mu$ m, and its integral non-linearity (INL) and differential non-linearity (DNL) are $-$ 0.43/ $+$ 7.22 and $-$ 0.30/ $+$ 0.29 LSB, respectively. The sensor achieves a 120-dB DR at 30 frames/sec and a temporal noise of 0.91e-.


  • A Multistep Multistage Fifth-Order Incremental Delta Sigma Analog-to-Digital Converter for Sensor Interfaces

    by Jia-Sheng Huang, Shih-Che Kuo, Chia-Hung Chen

    Incremental analog-to-digital converters (IADCs), by adding a simultaneous reset in analog modulators and digital filters, are Nyquist-rate ADCs which use noise-shaping to convert a finite number of analog samples into a single digital word. They retain most advantages of the delta sigma ( $\Delta \Sigma )$ ADCs, and are much easier to be multiplexed with shorter latency and simpler digital filters. Integrated sensor fusion system-on-chips (SoCs) require a high-accuracy low-latency analog-to-digital converter (ADC) to interface a wide input range signal and multiplex among multiple sensor channels. To fulfill these demands at the same time, a multistage multistep incremental ADC is proposed. A third-order multistage IADC, implemented by cascading a second-order IADC (IADC2) and a first-order IADC (IADC1), performs the coarse quantization in the first step. When the coarse quantization is finished, the residue is also accumulated at the last integrator’s output and is ready for fine quantization. The circuit is reused and reconfigured as a second IADC in the second step. Prototyped in 180 nm technology and power supplied at 1.8 V, the proposed work can achieve 20 kHz signal bandwidth with 358.4 $\mu $ W power dissipation. The measured performance of the prototype is 91 dB dynamic range (DR), 89.1 dB signal-to-noise-and-distortion (SNDR), and 107.5 dB spurious-free DR (SFDR). The measured SNDR/DR achieves Schreier figure-of-merit (FoM) of 166.6/168.5 dB.


  • A Multi-Step Incremental Analog-to-Digital Converter With a Single Opamp and Two- Capacitor SAR Extended Counting

    by Shih-Che Kuo, Jia-Sheng Huang, Yu-Cheng Huang, Chia-Wei Kao, Che-Wei Hsu, Chia-Hung Chen

    This work describes a hybrid incremental ADC (IADC) with two-capacitor (2-C) successive-approximation registers (SAR) extended counting in two-step operation to achieve high resolution data conversion. The circuits in the first step is acting as a first-order incremental analog-to-digital converter (IADC). Finite impulse response (FIR) DAC is incorporated in the loop filter to reduce the transient voltage step. It is reconfigured as a 2-C SAR to perform extended counting technique in the second step. Only one opamp is re-used in both steps. The hardware is prototyped in 0.18 μm CMOS technology, and the hybrid ADC accomplishes a measured DR / SNR / SNDR of 100.2 / 97.1 / 96.6 dB and an input signal bandwidth of 1.2 kHz. Operated at 1.5-V, it consumes 33.2 μW, and this achieves a Walden figure-of-merit (FoM) of 0.25 pJ/conversion-step and Schreier FoM of 175.8 dB.


  • Open Access

    A fourth‐order incremental ADC in three‐step

    by Jia‐Sheng Huang, Shih‐Che Kuo, Chia‐Wei Kao, Yu‐Cheng Huang, Che‐Wei Hsu, Chia‐Hung Chen

    This letter presents a second‐order incremental ADC (IADC) operated in three steps, which extends the performance of a second‐order IADC close to that of a fourth‐order IADC with only two amplifiers. It performs a second‐order noise‐shaping quantization in the first step operation. Reusing the same hardware, the circuit is reconfigured to perform fine quantization as a first‐order IADC in the second and third step. Within a conversion time of 60 clock periods (oversampling ratio OSR = 60), 35 dB signal‐to‐quantization‐noise ratio is boosted. The proposed topology is very suitable for low‐bandwidth high‐resolution data conversion.

  • A 677-μW 90-dB DR 16-kHz BW Incremental ΔΣ ADC for Sensor Interfaces

    by Chia-Wei Kao, Che-Wei Hsu, Jia-Sheng Huang, Yu-Cheng Huang, Shih-Che Kuo, Chia-Hung Chen

    Incremental ADCs (IADC) have more advantages and are now popular in high-resolution sensor interface circuits. In this paper, we proposed and demonstrate a power- and area-optimized IADC, using second-order feedforward one-bit modulator. With very simple coefficients scaling, the dynamic range is very wide and it can achieve 90-dB dynamic range and peak SNDR 86.2 dB with 2.6 Vpp, and its occupied area 0.025 mm 2 . It can achieve 16 kHz bandwidth with power consumption 677 μW, which results in a Schreier FoM 162 dB. It is very suitable for integration on sensor system-on-chip.

  • Top Cited Papers

    Incremental Delta-Sigma ADCs: A Tutorial Review

    by Zhichao Tan, Chia-Hung Chen, Youngcheol Chae, Gabor C. Temes

    In many sensor applications, a high-resolution analog-to-digital converter (ADC) is a key block. The use of an incremental delta-sigma ADC (IADC) is often well suited for such applications. While the energy-efficiency of IADCs has improved by several orders of magnitude over the past decade, the implementation of high performance IADCs, especially in battery-powered systems, is still challenging. This paper presents a tutorial review on energy-efficient IADCs and addresses the progress in this area. This paper describes the fundamentals of IADCs and energy-efficient hybrid IADC architectures. Various design techniques for improving the energy-efficiency of the IADCs are described. This paper is intended to serve as a starting point for the development of a new energy-efficient IADC.