Dariusz Milewski
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dariusz Milewski has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Beata Milewska
Institute of Management and Quality, WSB University in Poznan, Powstańców Wielkopolskich 5, 61-895 Poznan, Poland
8 shared publications - Bogusz Wiśnicki
Faculty of Engineering and Economics of Transport, Maritime University of Szczecin, Wały Chrobrego 1-2, 70-500 Szczecin, Poland
5 shared publications - Tomasz Wiśniewski
Institute of Management, University of Szczecin, Cukrowa 8 Street, 71-004 Szczecin, Poland
2 shared publications Uniwersytet Szczeciński
2 shared publications- Basilis Masoulas
Changeland.com
1 shared publication Beata Milewska
WSB University in Poznań, Faculty of Finance and Banking
1 shared publication
Latest Publications
- Open Access
- 28 October 2026
- Published by MDPI AG
Economic and Social Consequences of the COVID-19 Pandemic
This Reprint brings together research examining the economic and social consequences of the COVID-19 pandemic from the perspective of sustainability, resilience and systemic transformation. The collected studies analyse the effects of the pandemic on economies, businesses, labour markets, supply chains, financial systems, public institutions, education, healthcare and social behaviour. They also explore the responses adopted by governments, organisations and communities to mitigate disruption and support recovery. Covering different countries, sectors and methodological approaches, the Reprint provides a broad assessment of both the immediate and long-term consequences of the crisis. Particular attention is given to digital transformation, remote work, economic adaptation, social security and the resilience of organisations and supply chains. The Reprint is intended for researchers, policymakers, managers and other readers interested in crisis management, sustainable development and socio-economic resilience.
- 28 October 2026
- Published by MDPI AG
Open AccessEconomic and Social Consequences of the COVID-19 Pandemic
This Reprint brings together research examining the economic and social consequences of the COVID-19 pandemic from the perspective of sustainability, resilience and systemic transformation. The collected studies analyse the effects of the pandemic on economies, businesses, labour markets, supply chains, financial systems, public institutions, education, healthcare and social behaviour. They also explore the responses adopted by governments, organisations and communities to mitigate disruption and support recovery. Covering different countries, sectors and methodological approaches, the Reprint provides a broad assessment of both the immediate and long-term consequences of the crisis. Particular attention is given to digital transformation, remote work, economic adaptation, social security and the resilience of organisations and supply chains. The Reprint is intended for researchers, policymakers, managers and other readers interested in crisis management, sustainable development and socio-economic resilience.
- Open Access
- 28 October 2026
- Published by MDPI AG
Economic and Social Consequences of the COVID-19 Pandemic
This Reprint brings together research examining the economic and social consequences of the COVID-19 pandemic from the perspective of sustainability, resilience and systemic transformation. The collected studies analyse the effects of the pandemic on economies, businesses, labour markets, supply chains, financial systems, public institutions, education, healthcare and social behaviour. They also explore the responses adopted by governments, organisations and communities to mitigate disruption and support recovery. Covering different countries, sectors and methodological approaches, the Reprint provides a broad assessment of both the immediate and long-term consequences of the crisis. Particular attention is given to digital transformation, remote work, economic adaptation, social security and the resilience of organisations and supply chains. The Reprint is intended for researchers, policymakers, managers and other readers interested in crisis management, sustainable development and socio-economic resilience.
- 28 October 2026
- Published by MDPI AG
Open AccessEconomic and Social Consequences of the COVID-19 Pandemic
This Reprint brings together research examining the economic and social consequences of the COVID-19 pandemic from the perspective of sustainability, resilience and systemic transformation. The collected studies analyse the effects of the pandemic on economies, businesses, labour markets, supply chains, financial systems, public institutions, education, healthcare and social behaviour. They also explore the responses adopted by governments, organisations and communities to mitigate disruption and support recovery. Covering different countries, sectors and methodological approaches, the Reprint provides a broad assessment of both the immediate and long-term consequences of the crisis. Particular attention is given to digital transformation, remote work, economic adaptation, social security and the resilience of organisations and supply chains. The Reprint is intended for researchers, policymakers, managers and other readers interested in crisis management, sustainable development and socio-economic resilience.
- Open Access
- 28 October 2026
- Published by MDPI AG
Economic and Social Consequences of the COVID-19 Pandemic
This Reprint brings together research examining the economic and social consequences of the COVID-19 pandemic from the perspective of sustainability, resilience and systemic transformation. The collected studies analyse the effects of the pandemic on economies, businesses, labour markets, supply chains, financial systems, public institutions, education, healthcare and social behaviour. They also explore the responses adopted by governments, organisations and communities to mitigate disruption and support recovery. Covering different countries, sectors and methodological approaches, the Reprint provides a broad assessment of both the immediate and long-term consequences of the crisis. Particular attention is given to digital transformation, remote work, economic adaptation, social security and the resilience of organisations and supply chains. The Reprint is intended for researchers, policymakers, managers and other readers interested in crisis management, sustainable development and socio-economic resilience.
- 28 October 2026
- Published by MDPI AG
Open AccessEconomic and Social Consequences of the COVID-19 Pandemic
This Reprint brings together research examining the economic and social consequences of the COVID-19 pandemic from the perspective of sustainability, resilience and systemic transformation. The collected studies analyse the effects of the pandemic on economies, businesses, labour markets, supply chains, financial systems, public institutions, education, healthcare and social behaviour. They also explore the responses adopted by governments, organisations and communities to mitigate disruption and support recovery. Covering different countries, sectors and methodological approaches, the Reprint provides a broad assessment of both the immediate and long-term consequences of the crisis. Particular attention is given to digital transformation, remote work, economic adaptation, social security and the resilience of organisations and supply chains. The Reprint is intended for researchers, policymakers, managers and other readers interested in crisis management, sustainable development and socio-economic resilience.
- Open Access
- 5 August 2026
- Published by Elsevier in SSRN Electronic Journal
Productivity of commerce in the time of AI and e-commerce
The authors analyzed the financial results of 219 retail, wholesale, and e-commerce companies from the US and EU to calculate the productivity of employees, stores and inventories over a 15-year period. The results indicate that the productivity of American companies (retail, wholesale companies, as well as e-commerce) is higher than European companies, and that the productivity of international trading companies is usually higher than that of single-country companies. Employee productivity in wholesale companies is the highest, average in e-commerce, and lowest in retail. The sales volume does not have a significant impact on productivity – only in some sectors the largest firms are also the most productive. Type of business activity is important factor on productivity. The pandemic period had little impact on productivity, revenue, and employment. The implementation of modern technologies does not translate into significant productivity gains, employment reductions, or improved financial results.
- 5 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessProductivity of commerce in the time of AI and e-commerce
The authors analyzed the financial results of 219 retail, wholesale, and e-commerce companies from the US and EU to calculate the productivity of employees, stores and inventories over a 15-year period. The results indicate that the productivity of American companies (retail, wholesale companies, as well as e-commerce) is higher than European companies, and that the productivity of international trading companies is usually higher than that of single-country companies. Employee productivity in wholesale companies is the highest, average in e-commerce, and lowest in retail. The sales volume does not have a significant impact on productivity – only in some sectors the largest firms are also the most productive. Type of business activity is important factor on productivity. The pandemic period had little impact on productivity, revenue, and employment. The implementation of modern technologies does not translate into significant productivity gains, employment reductions, or improved financial results.
- Open Access
- 8 May 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (10) , 4662
Economic and Social Consequences of the COVID-19 Pandemic: Resilience, Sustainability and Systemic Transformation
The COVID-19 pandemic was one of the most complex socio-economic crises of the early 21st century
- 8 May 2026
- Published by MDPI AG in Sustainability
- Vol. 18 (10) , 4662
Open AccessEconomic and Social Consequences of the COVID-19 Pandemic: Resilience, Sustainability and Systemic Transformation
The COVID-19 pandemic was one of the most complex socio-economic crises of the early 21st century
- Open Access
- 17 April 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (8) , 3617
Lean, Agile, and Six Sigma: Efficiency and the Challenges of Today’s World: Is It Time for a Change?
The article presents the results of research on the resilience of companies using management concepts such as Lean Management, Agile, and Six Sigma to the crises that companies have had to face in recent years: the COVID-19 pandemic, rising energy prices, and the war in Ukraine. The implementation of these management concepts should lead to process improvements and a reduction in the consumption of production resources, including energy. The aim of the study was to determine how these crises have affected the efficiency of companies and to determine whether the solutions used so far are sufficient or require modification. The authors used three research methods. Firstly, they analyzed the literature—scientific publications, studies, and expert reports. Secondly, they analyzed the financial results (net profits and share of Costs of Goods Sold in the value of Revenues) in the period before (2016–2019) and after the outbreak of the COVID-19 pandemic (2020–2023) of companies using Lean Management, Agile, and Six Sigma strategies and their combinations. To compare the effectiveness of these management methods, they also analyzed the financial results of international corporations and Polish companies. Third, they conducted a survey among Polish companies applying the Lean Management concept. The results of this research show that the crises of recent years, even if they caused a deterioration in financial performance, were short-lived as companies were able to adapt to the new conditions. Japanese companies using Lean Management increased their profits by an average of 55.56% between 2020 and 2023, and “Lean” American organizations even more (71.64%). Polish companies have been steadily increasing their profits for years (134.14% before the pandemic and 143.27% after the outbreak). The share of COGS will remain at a similar (high) level for many years to come. There are no significant increases in these costs due to crises in the companies’ environment (e.g., increase in energy prices), and, on the other hand, there is no tendency for them to decrease in a large proportion of companies. In the years 2020–2023, the largest decreases in the share of these costs occurred in companies combining Lean and Six Sigma (−11.85%). In companies that use the Agile strategy, there was an increase of 8.05%. However, these are average data, and the analysis of the results of companies from individual groups leads to the conclusion that it is not only the management concept that is important, but also how it is implemented in a given company. In addition, streamlining processes only by eliminating waste is not enough these days. It is necessary to use modern technologies (digital technologies, Industry 4.0). Increasing the efficiency of production or logistics processes leads to a reduction in energy consumption and external costs. However, new, specialized solutions are needed. The issue of energy efficiency is indeed gaining more and more importance in companies and is included in management concepts, e.g., in Lean Management.
- 17 April 2025
- Published by MDPI AG in Sustainability
- Vol. 17 (8) , 3617
Open AccessLean, Agile, and Six Sigma: Efficiency and the Challenges of Today’s World: Is It Time for a Change?
The article presents the results of research on the resilience of companies using management concepts such as Lean Management, Agile, and Six Sigma to the crises that companies have had to face in recent years: the COVID-19 pandemic, rising energy prices, and the war in Ukraine. The implementation of these management concepts should lead to process improvements and a reduction in the consumption of production resources, including energy. The aim of the study was to determine how these crises have affected the efficiency of companies and to determine whether the solutions used so far are sufficient or require modification. The authors used three research methods. Firstly, they analyzed the literature—scientific publications, studies, and expert reports. Secondly, they analyzed the financial results (net profits and share of Costs of Goods Sold in the value of Revenues) in the period before (2016–2019) and after the outbreak of the COVID-19 pandemic (2020–2023) of companies using Lean Management, Agile, and Six Sigma strategies and their combinations. To compare the effectiveness of these management methods, they also analyzed the financial results of international corporations and Polish companies. Third, they conducted a survey among Polish companies applying the Lean Management concept. The results of this research show that the crises of recent years, even if they caused a deterioration in financial performance, were short-lived as companies were able to adapt to the new conditions. Japanese companies using Lean Management increased their profits by an average of 55.56% between 2020 and 2023, and “Lean” American organizations even more (71.64%). Polish companies have been steadily increasing their profits for years (134.14% before the pandemic and 143.27% after the outbreak). The share of COGS will remain at a similar (high) level for many years to come. There are no significant increases in these costs due to crises in the companies’ environment (e.g., increase in energy prices), and, on the other hand, there is no tendency for them to decrease in a large proportion of companies. In the years 2020–2023, the largest decreases in the share of these costs occurred in companies combining Lean and Six Sigma (−11.85%). In companies that use the Agile strategy, there was an increase of 8.05%. However, these are average data, and the analysis of the results of companies from individual groups leads to the conclusion that it is not only the management concept that is important, but also how it is implemented in a given company. In addition, streamlining processes only by eliminating waste is not enough these days. It is necessary to use modern technologies (digital technologies, Industry 4.0). Increasing the efficiency of production or logistics processes leads to a reduction in energy consumption and external costs. However, new, specialized solutions are needed. The issue of energy efficiency is indeed gaining more and more importance in companies and is included in management concepts, e.g., in Lean Management.
- Open Access
- 3 April 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (7) , 3970
The Combined Decision Problem: “Pull” vs. “Push” and the Degree of Centralization of Warehousing in the Field of Physical Distribution with a Special Focus on the Polish Market
This article concerns the efficiency of the distribution system with different strategies—“Pull” or “Push”—and different sizes of distribution network in terms of when products produced by the manufacturing plant are sent to distribution warehouses. The article hypothesized that the choice of how to replenish stocks in these warehouses—“Pull” or “Push”—and the choice of the degree of centralization of the distribution network (number of warehouses) were two decision problems that should be considered together. This hypothesis was confirmed. A simulation model was developed to conduct simulations for different scenarios (different demand distributions—Gaussian or Gamma different demand fluctuations and the timeliness of replenishing inventories in warehouses). With more expensive goods and greater sales fluctuations, there was a certain tendency towards centralizing storage and using the Pull strategy. The choice of a given strategy had a significant impact on the costs of logistics processes and on the profitability of enterprises. The cost savings ranged from 17% to 54%. The average share of distribution costs in the sales value was 6%. In some cases, it was over 10% (the level of profitability of industrial enterprises In Poland). Choosing the right strategy could, in some cases, change profits by 20%. In most cases, the most cost-effective strategy was a flexible Pull system and centralized storage, which is consistent with real-life business cases.
- 3 April 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (7) , 3970
Open AccessThe Combined Decision Problem: “Pull” vs. “Push” and the Degree of Centralization of Warehousing in the Field of Physical Distribution with a Special Focus on the Polish Market
This article concerns the efficiency of the distribution system with different strategies—“Pull” or “Push”—and different sizes of distribution network in terms of when products produced by the manufacturing plant are sent to distribution warehouses. The article hypothesized that the choice of how to replenish stocks in these warehouses—“Pull” or “Push”—and the choice of the degree of centralization of the distribution network (number of warehouses) were two decision problems that should be considered together. This hypothesis was confirmed. A simulation model was developed to conduct simulations for different scenarios (different demand distributions—Gaussian or Gamma different demand fluctuations and the timeliness of replenishing inventories in warehouses). With more expensive goods and greater sales fluctuations, there was a certain tendency towards centralizing storage and using the Pull strategy. The choice of a given strategy had a significant impact on the costs of logistics processes and on the profitability of enterprises. The cost savings ranged from 17% to 54%. The average share of distribution costs in the sales value was 6%. In some cases, it was over 10% (the level of profitability of industrial enterprises In Poland). Choosing the right strategy could, in some cases, change profits by 20%. In most cases, the most cost-effective strategy was a flexible Pull system and centralized storage, which is consistent with real-life business cases.
- Open Access
- 21 February 2025
- Published by MDPI AG in Preprints.org
The Combined Decision Problem: “Pull” vs. “Push” and the Degree of Centralization of Warehousing in the Field of Physical Distribution
The article presents the problem of efficiency of the distribution system with different strategies - “Pull” or “Push” and different sizes of distribution networks. The problem relates to the case where products are shipped to the customers through the distribution network. The problem addressed by the author concerns the method of replenishing stocks in these warehouses by the production plant. The author hypothesized that the profitability of using the Pull or Push strategy depends on the number of warehouses - and vice versa: not only how many warehouses (or distribution centers) there are, but also how the stocks stored in them are replenished. For this reason, both of these decision problems should be considered together. The profitability of a particular combination of these two strategies depends on the costs of the logistics and production processes, the parameters of the distributed products and the parameters of demand. This hypothesis has been confirmed. The author developed a simulation model to calculate the effects of applying a given strategy on the availability of these stocks to customers and the levels of stocks. The model was used to simulate different scenarios (different demand distribution - Gauss or Gamma and different demand fluctuations). The results obtained can be further used to calculate the economic efficiency of these strategies, which is also presented in the article as an example of the application of this model. With more expensive goods and higher fluctuations in sales, there is a certain tendency to centralize storage and use Pull strategies. A given strategy - Pull or Push - is not necessarily related to a given competitive strategy (competing with lower costs or better service). Each of these strategies may result in lower total costs or higher level of Logistics Customer Service measured by the availability of the products to customers.
- 21 February 2025
- Published by MDPI AG in Preprints.org
Open AccessThe Combined Decision Problem: “Pull” vs. “Push” and the Degree of Centralization of Warehousing in the Field of Physical Distribution
The article presents the problem of efficiency of the distribution system with different strategies - “Pull” or “Push” and different sizes of distribution networks. The problem relates to the case where products are shipped to the customers through the distribution network. The problem addressed by the author concerns the method of replenishing stocks in these warehouses by the production plant. The author hypothesized that the profitability of using the Pull or Push strategy depends on the number of warehouses - and vice versa: not only how many warehouses (or distribution centers) there are, but also how the stocks stored in them are replenished. For this reason, both of these decision problems should be considered together. The profitability of a particular combination of these two strategies depends on the costs of the logistics and production processes, the parameters of the distributed products and the parameters of demand. This hypothesis has been confirmed. The author developed a simulation model to calculate the effects of applying a given strategy on the availability of these stocks to customers and the levels of stocks. The model was used to simulate different scenarios (different demand distribution - Gauss or Gamma and different demand fluctuations). The results obtained can be further used to calculate the economic efficiency of these strategies, which is also presented in the article as an example of the application of this model. With more expensive goods and higher fluctuations in sales, there is a certain tendency to centralize storage and use Pull strategies. A given strategy - Pull or Push - is not necessarily related to a given competitive strategy (competing with lower costs or better service). Each of these strategies may result in lower total costs or higher level of Logistics Customer Service measured by the availability of the products to customers.
- Open Access
- 20 February 2025
- Published by MDPI AG in Preprints.org
Lean, Agile and Six Sigma: Efficiency and the Challenges of Today's World, Is It Time for Change?
The article presents the results of the authors' research on the resilience of management concepts such as Lean Management, Agile, SixSigma to phenomena in the business environment. The crises of recent years - the Covid-19 pandemic, the increase in energy prices, the war in Ukraine - have posed great challenges for companies, including those that have applied management concepts such as Lean Management. Just-In-Time may involve more frequent deliveries, which has an impact on fuel consumption costs. On the other hand, however, improving processes by eliminating waste leads to a reduction in the consumption of production resources, including energy. The relationship is therefore not clear-cut. The authors used three research methods. Firstly, they analysed the literature - scientific publications, studies and expert reports. Secondly, they analysed the financial results from recent years of Polish companies, multinationals and companies that apply Lean Management, Agile and Six Sigma strategies and their combination. Thirdly, they surveyed companies that apply the Lean Management concept. The research sought to establish how crises, especially energy crises, have affected the effectiveness of companies using these management strategies and to determine whether the solutions used so far are sufficient or whether they need to be modified or new methods or tools need to be developed. The results of this research show that the crises of recent years, if they even caused a deterioration in the financial situation, were short-lived, as companies were able to adapt to the new conditions. The situation of companies that have implemented Lean is no better than that of other companies - it is not apparent that any of the management concepts studied help more in increasing process efficiency. The best results come from companies that combine different concepts (Lean, Agile, SixSigma), as well as digital technologies Industry 4.0). The crises, although they have forced companies to take certain measures (e.g. the use of renewable energy sources), have (contrary to predictions) not resulted in radical changes, i.e. moving from one concept to another or abandoning Just-In-Time. The issue of energy efficiency is gaining more and more attention in companies and is included in management concepts, e.g. Lean management. Lean management has a positive effect on energy efficiency (indirect effect) through the elimination of waste, but in order to effectively increase energy efficiency, solutions must be applied that are aimed directly at increasing energy efficiency.
- 20 February 2025
- Published by MDPI AG in Preprints.org
Open AccessLean, Agile and Six Sigma: Efficiency and the Challenges of Today's World, Is It Time for Change?
The article presents the results of the authors' research on the resilience of management concepts such as Lean Management, Agile, SixSigma to phenomena in the business environment. The crises of recent years - the Covid-19 pandemic, the increase in energy prices, the war in Ukraine - have posed great challenges for companies, including those that have applied management concepts such as Lean Management. Just-In-Time may involve more frequent deliveries, which has an impact on fuel consumption costs. On the other hand, however, improving processes by eliminating waste leads to a reduction in the consumption of production resources, including energy. The relationship is therefore not clear-cut. The authors used three research methods. Firstly, they analysed the literature - scientific publications, studies and expert reports. Secondly, they analysed the financial results from recent years of Polish companies, multinationals and companies that apply Lean Management, Agile and Six Sigma strategies and their combination. Thirdly, they surveyed companies that apply the Lean Management concept. The research sought to establish how crises, especially energy crises, have affected the effectiveness of companies using these management strategies and to determine whether the solutions used so far are sufficient or whether they need to be modified or new methods or tools need to be developed. The results of this research show that the crises of recent years, if they even caused a deterioration in the financial situation, were short-lived, as companies were able to adapt to the new conditions. The situation of companies that have implemented Lean is no better than that of other companies - it is not apparent that any of the management concepts studied help more in increasing process efficiency. The best results come from companies that combine different concepts (Lean, Agile, SixSigma), as well as digital technologies Industry 4.0). The crises, although they have forced companies to take certain measures (e.g. the use of renewable energy sources), have (contrary to predictions) not resulted in radical changes, i.e. moving from one concept to another or abandoning Just-In-Time. The issue of energy efficiency is gaining more and more attention in companies and is included in management concepts, e.g. Lean management. Lean management has a positive effect on energy efficiency (indirect effect) through the elimination of waste, but in order to effectively increase energy efficiency, solutions must be applied that are aimed directly at increasing energy efficiency.
- Open Access
- 1 January 2025
- Published by University of Szczecin
Produktywność przedsiębiorstw i wydajność procesów we współczesnym świecie
Productivity of enterprises and efficiency of processes in the today’s world The monograph presents the author’s research results on the productivity of enterprises and the efficiency of its processes and its factors in the modern world. For this purpose, scientific literature, expert studies and data available on the Internet were analyzed, including, above all, financial reports of companies in which financial results, costs and data and information on the resources used (employment, consumption of means of production) are presented. The financial results of Polish and international manufacturing and service companies, including those using Lean Management, SixSigma and Agile concepts, were studied. Based on this data, the author made numerous calculations of the productivity of the resources used and the share of production costs in the value of revenues. The aim was to verify whether the views on the weak productivity growth worldwide, especially in highly developed countries, despite spectacular technological progress, are correct. The aim was also to determine whether there is a correlation between productivity changes and factors such as the country in which a given company operates, the type of activity (production, services), the sector of the economy, and the size of the company. These factors are important. The influence of classic efficiency factors such as “economies of scale” has been confirmed. However, the most important factor seems to be how a given company, its processes and resources are managed. The author’s research shows that even if there is indeed a problem of low productivity growth, it mainly concerns entire economies, while there are very large differences between companies. In the companies researched by the author, both Polish and foreign, productivity is increasing, which is mainly due to an increase in revenues but also to a reduction in employment. Poland is a leader in productivity growth. In many companies, although revenues are growing, employment has remained at a similar level for years. This may indicate that these companies are increasing the efficiency of their processes. The impact of external factors is important – companies have been affected by the global economic crisis, the Covid-19 pandemic, rising energy prices and inflation. However, efficient companies have managed to cope in these difficult times. Long-term effects are more important, especially social phenomena such as generational change and an ageing population. This is a significant problem because, contrary to what one might think, technological progress does not eliminate humans from the production process; only their role changes. Achieving high efficiency is not guaranteed by the use of famous management concepts such as Lean Management, SixSigma, or Agile, because they also require modification and adaptation to the modern conditions in which companies operate. The monograph also discusses the concepts of effectiveness, efficiency, and productivity, with particular emphasis on the usefulness of ways to measure them in the management of an enterprise. The conclusions drawn from the above considerations are that the distinction between these concepts is important not only from a theoretical but also from a practical point of view, because different measures can serve different goals. The measurement of efficiency, productivity or profits should be approached systematically. Therefore, the differences between the three fields – economics, management and finance – as well as their common areas are also presented.
- 1 January 2025
- Published by University of Szczecin
Open AccessProduktywność przedsiębiorstw i wydajność procesów we współczesnym świecie
Productivity of enterprises and efficiency of processes in the today’s world The monograph presents the author’s research results on the productivity of enterprises and the efficiency of its processes and its factors in the modern world. For this purpose, scientific literature, expert studies and data available on the Internet were analyzed, including, above all, financial reports of companies in which financial results, costs and data and information on the resources used (employment, consumption of means of production) are presented. The financial results of Polish and international manufacturing and service companies, including those using Lean Management, SixSigma and Agile concepts, were studied. Based on this data, the author made numerous calculations of the productivity of the resources used and the share of production costs in the value of revenues. The aim was to verify whether the views on the weak productivity growth worldwide, especially in highly developed countries, despite spectacular technological progress, are correct. The aim was also to determine whether there is a correlation between productivity changes and factors such as the country in which a given company operates, the type of activity (production, services), the sector of the economy, and the size of the company. These factors are important. The influence of classic efficiency factors such as “economies of scale” has been confirmed. However, the most important factor seems to be how a given company, its processes and resources are managed. The author’s research shows that even if there is indeed a problem of low productivity growth, it mainly concerns entire economies, while there are very large differences between companies. In the companies researched by the author, both Polish and foreign, productivity is increasing, which is mainly due to an increase in revenues but also to a reduction in employment. Poland is a leader in productivity growth. In many companies, although revenues are growing, employment has remained at a similar level for years. This may indicate that these companies are increasing the efficiency of their processes. The impact of external factors is important – companies have been affected by the global economic crisis, the Covid-19 pandemic, rising energy prices and inflation. However, efficient companies have managed to cope in these difficult times. Long-term effects are more important, especially social phenomena such as generational change and an ageing population. This is a significant problem because, contrary to what one might think, technological progress does not eliminate humans from the production process; only their role changes. Achieving high efficiency is not guaranteed by the use of famous management concepts such as Lean Management, SixSigma, or Agile, because they also require modification and adaptation to the modern conditions in which companies operate. The monograph also discusses the concepts of effectiveness, efficiency, and productivity, with particular emphasis on the usefulness of ways to measure them in the management of an enterprise. The conclusions drawn from the above considerations are that the distinction between these concepts is important not only from a theoretical but also from a practical point of view, because different measures can serve different goals. The measurement of efficiency, productivity or profits should be approached systematically. Therefore, the differences between the three fields – economics, management and finance – as well as their common areas are also presented.