Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xue-Rong Shi has a total of 254 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Rational Design of ZIF-67−Derived CoNiMn Phosphide Nanosheets for Hydrogen Evolution

    by Mingmin Yan, Zhaozhao Wang, Shusheng Xu, Xuya Wang, Xue-Rong Shi

    The design of earth-abundant electrocatalysts capable of driving the hydrogen evolution reaction (HER) across acidic, neutral, and alkaline electrolytes remains challenging. Here, ZIF-67-derived Co−Ni−Mn-containing phosphide nanosheet arrays were prepared directly on carbon cloth (nominally denoted CoNi2Mn3−P/CC). The optimized electrode delivers overpotentials of 77, 81, and 154 mV at 10 mA cm−2 in 1.0 M KOH, 0.5 M H2SO4, and 1.0 M phosphate-buffered solution, respectively. After 60 h of potentiostatic operation, the reported current-retention values are 72.5%, 67.6%, and 70.1% in alkaline, acidic, and neutral media, respectively, revealing measurable long-term activity losses. In a two-electrode electrolyzer coupled with a FeOOH/(Ni1Co1)MoO4/CC anode, the catalyst reaches 10 mA cm−2 at a cell voltage of 1.54 V; a solar-panel-powered demonstration is also presented. Structural analyses identify CoP- and Mn2P-related crystalline features together with Ni-containing surface species, while density functional theory (DFT) calculations indicate that selected Co/Ni-containing model sites have favorable hydrogen adsorption free energies (ΔGH*). These findings illustrate a composition- and architecture-directed approach to self-supported HER electrocatalysts, while emphasizing the importance of verifying operational stability and the detailed local metal environments.

  • Rh-Induced Oxygen Vacancies in a PdRh/SnO2 Heterointerface for Enhanced MEMS Hydrogen Detection

    by Haichao Xiong, Shusheng Xu, Tao Wang, Wangze Ni, Zhaozhao Wang, Yiting Chen, Xuerong Shi, Lipeng Zhao, Ming Li

    High-performance hydrogen (H2) sensors are essential for industrial safety and environmental monitoring. Herein, we report a microelectromechanical system (MEMS) H2 sensor based on SnO2 nanoflowers in situ decorated with PdRh nanoparticles (PdRh/SnO2). Gas-sensing evaluations demonstrate that the sensor exhibits an ultrahigh response (Ra/Rg) of 20.2 to 100 ppm H2, representing a nearly 4-fold enhancement compared to the conventional Pd/SnO2 sensor. Furthermore, it displays rapid response and recovery times of merely 1.7 and 2.2 s, equivalent to ∼63 and ∼34% of those exhibited by the Pd/SnO2 counterpart, respectively. Additionally, the device achieves a notably low detection limit below 100 ppb alongside good long-term stability. Mechanistic studies combining experiments and density functional theory (DFT) calculations reveal that this significant performance enhancement originates from a dual mechanism. While the synergistic catalytic dissociation of H2 by the PdRh nanoalloy contributes to the improved sensing kinetics, we uncover a more critical role of Rh: it lowers the desorption energy barrier of lattice oxygen in SnO2, thereby inducing the formation of high-density oxygen vacancies at the heterointerface. This Rh-mediated defect engineering promotes the adsorption and generation of reactive oxygen species, providing abundant active sites for H2 reactions and substantially amplifying the sensing response. Finally, the PdRh/SnO2-based MEMS sensor was successfully integrated into a portable wireless monitoring system, validating its tremendous potential for H2 detection applications.


  • NIR-II photothermal–thermoelectric effect-enhanced electrochemical sensing for dopamine detection in sweat

    by Wenbin Qiu, Lipeng Zhao, Haichao Xiong, Huimin Qi, Jialin Pan, Hailong Wu, Shusheng Xu, Yujie Ma, Xuerong Shi

    The accurate and non-invasive detection of dopamine (DA) in sweat is crucial for the early diagnosis of neurological diseases, but the selective and sensitive detection of DA in complex biological matrices still remains a challenge. This study presents a novel ternary nanocomposite, gold nanobipyramid@copper selenide@MXene nanosheets (Au NBP@Cu2-xSe @MXene), based screen-printed electrodes for the highly sensitive and selective detection of DA. For the first time, Au NBPs with localized surface plasmon resonance (LSPR) in the near-infrared second window (NIR-II) are employed to enable a one-step, pretreatment-free detection strategy by leveraging the negligible background absorption of biological matrices. Under NIR-II irradiation, the Au NBP core generates LSPR photothermal effect, which can be harnessed by the Cu2-xSe shell to induce a thermoelectric field that significantly accelerates the interfacial electrocatalytic oxidation of DA. Besides, Au NBPs can generate LSPR hot carriers which inject into Cu2-xSe to participate the redox process. Furthermore, the MXene substrate ensures efficient charge transport and structural stability. As a result, this ternary nanocomposite based sensor exhibits a wide linear detection range for DA from 0.1 to 1000 μM. It achieves a detection limit of 0.107 μM under standard conditions, which is further enhanced to 0.068 μM under NIR-II laser irradiation, demonstrating the effective signal amplification via the photothermal-thermoelectric coupling. This work provides a robust and innovative material platform that integrates photothermal, thermoelectric, and electrochemical mechanisms, paving the way for the development of next-generation, high-performance wearable sensors for non-invasive health monitoring.

  • Nanoscale Ag 2 O/WO 3 Heterojunctions for High-Performance Acetylene Detection

    by Lipeng Zhao, Shusheng Xu, Haichao Xiong, Wenbin Qiu, Xuerong Shi, Ming Li


  • Alkali-Free Synthesis of Formic Acid from CO 2 Hydrogenation on a Pd/CoAlO x Catalyst Rich in Intimate Pd 0 –CoO–AlO x Ensembles

    by Mengwei Li, Qian Zhang, Shiying Li, Bo Zhou, Sen Wang, Mei Dong, Jianguo Wang, Xuerong Shi, Maohong Fan, Weibin Fan

    CO2 hydrogenation to formic acid is not only an effective route to achieving carbon neutrality but also a sustainable way to create a recyclable hydrogen energy storage and release system. Typically, a large amount of bases, such as alkali/alkaline earth metal hydroxides or other organics, is added to the reaction system to enhance the reaction, thereby facilitating the formation of formates that are difficult to decompose for recycling CO2 and releasing H2. In this context, a Pd/CoAlOx catalyst with intimate Pd0-CoO-AlOx ensembles was synthesized, and it showed an unprecedentedly high formic acid turnover frequency (TOF) of ∼94 h-1 at 80 °C and 3.0 MPa in the absence of any alkali additives, which is significantly higher than those of the reported catalysts. Aberration-corrected high-angle annular dark field scanning transmission electron microscopy, high-resolution electron energy loss spectroscopy, quasi in situ X-ray photoelectron spectroscopy, quasi in situ low-energy ion scattering, X-ray absorption near-edge structure/extended X-ray absorption fine structure, in situ CO2-DRIFTS, H2-D2 exchanging experiment, and density functional theory calculation results unraveled that the intimate assembly of CoO and AlOx species to CoO-AlOx interfaces can not only provide essential active sites for CO2 adsorption but also facilitate the atomic dispersion of metallic Pd0 species that enhances H2 dissociation. As a result, Pd0-CoO-AlOx ensembles significantly enhance the catalytic activity of Pd/CoAlOx(1/1) for the hydrogenation of CO2 to formic acid.


  • Frontiers in gas sensing with semiconducting metal oxide array electronic noses

    by Yuchen Xia, Heng Zhang, Xuerong Shi, Shusheng Xu

    This graph outlines key semiconductor metal oxide gas sensor tech: materials (ZnO, SnO 2 , TiO 2 ), ML (CNN, KNN, SVM), μheater fab (bulk Si, SOI, floating), photoactivation (UV/vis).


  • Gas sensing for lithium-ion battery thermal runaway: an inorganic chemistry perspective

    by Heng Zhang, Yongqiang Liu, Jiaxiang Xing, Bofei Zheng, Xuerong Shi, Shusheng Xu

    This review summarizes electronic nose systems based on material engineering, device integration, and machine learning, highlighting gas sensing mechanisms and their potential for early warning of thermal runaway in lithium-ion batteries.

  • Electron Delocalization-Induced Modulation of Rate-Determining Step of Copper Catalyst for Efficient Ammonia Electrosynthesis

    by Yao Dai, Xuerong Shi, Peng Zhao, Xingzhe Chen, Chaofan Liu, Kaihang Yue, Jin Yang, Ruihu Lu, Xueyang Tu, Laiquan Li, et al.

    Electrochemical NOx- reduction offers an attractive approach for the sustainable production of ammonia (NH3). Copper (Cu)-based materials are commonly used catalysts but suffer from a complex reaction pathway and low NH3 selectivity. Herein, we report an electron delocalization strategy by inducing oxygen vacancy and chlorine (Cl) coordination sites as a dual modulator for the active Cu sites. Our model catalyst (Cu2O1-xCl2) could deliver high NH3 yields over a wide potential window, with a maximum NH3 yield rate of 10.05 mg h-1 cm-2 and a Faradaic efficiency (FE) of 95.1%, exceeding most reported metal catalysts. A combination of experimental and theoretical investigations reveals that the dual modulator induces a favorable electron delocalization around the active Cu sites, resulting in an alteration of the rate-determining step (RDS) from NO2* hydrogenation to the one proton-electron coupling of NO* to form NOH*. This thus enables rapid hydrogenation, avoids the occurrence of side reactions, and significantly improves the selectivity and yield of NH3. When assembled into a membrane electrode electrolyzer, the cell can achieve an industrial current density of 340 mA cm-2 with an NH3 production rate of about 21.36 mg h-1 cm-2 and stably operates for up to 200 h. This RDS regulation strategy provides an innovative solution for enhancing the selectivity and efficiency of target products in electrocatalysis.