Ngoc Quang Tran
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ngoc Quang Tran has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
Bong Kyun Kang
School of Advanced Materials Science and Engineering, Sungkyunkwan University, 2066, Seobu-ro,Jangan-gu, Suwon-si, Gyeong gi-do, Republic of Korea
3 shared publications- Dae Ho Yoon
School of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, Republic of Korea
3 shared publications - Hyoyoung Lee
Department of Chemistry, Sungkyunkwan University (SKKU), Suwon, Republic of Korea
3 shared publications Sintayehu Nibret Tiruneh
School of Advanced Materials Science and Engineering, Sungkyunkwan University, South Korea
2 shared publicationsThi Anh Le
Department of Chemistry, Sungkyunkwan University, Suwon, 440-746, South Korea
2 shared publicationsHung M. Le
Division of Molecular Modeling Center for Innovative Materials and Architectures Vietnam National University Ho Chi Minh City 721337 Vietnam
1 shared publication
Latest Publications
- 30 October 2018
- Published by Wiley in Chemistry – A European Journal
- Vol. 25 (4) , 1037-1043
Intertwined Titanium Carbide MXene within a 3 D Tangled Polypyrrole Nanowires Matrix for Enhanced Supercapacitor Performances
The exploration of the rational design and synthesis of unique and robust architectured electrodes for the high capacitance, rate capability, and stability of supercapacitors is crucial to the future of energy storage technology. Herein, an in situ synthesis of multilayered titanium carbide MXene tightly caging within a 3 D conducting tangled polypyrrole (PPy) nanowire (NW) network is proposed as an effective strategy to prevent the aggregation of MXene, profoundly enhancing the electrochemical performance of the supercapacitor. Owing to the beneficial effects of an ideal 3 D interconnected porous structure and high electrical conductivity, the obtained electrode exhibits fast charge and ion transport kinetics as well as full usage of active material. As expected, the 3 D Ti3C2Tx@PPY NW exhibits a specific capacitance five times higher than that of pristine MXene (610 F g−1), a good rate capability up to a current density of 25 A g−1, and excellent stability with 100 % retention after 14 000 cycles at 4 A g−1, outperforming the known state‐of‐the‐art MXene‐based supercapacitor. Our work provides a facile method for enhancing the performance of MXene‐based energy storage devices.
- 30 October 2018
- Published by Wiley in Chemistry – A European Journal
- Vol. 25 (4) , 1037-1043
Intertwined Titanium Carbide MXene within a 3 D Tangled Polypyrrole Nanowires Matrix for Enhanced Supercapacitor Performances
The exploration of the rational design and synthesis of unique and robust architectured electrodes for the high capacitance, rate capability, and stability of supercapacitors is crucial to the future of energy storage technology. Herein, an in situ synthesis of multilayered titanium carbide MXene tightly caging within a 3 D conducting tangled polypyrrole (PPy) nanowire (NW) network is proposed as an effective strategy to prevent the aggregation of MXene, profoundly enhancing the electrochemical performance of the supercapacitor. Owing to the beneficial effects of an ideal 3 D interconnected porous structure and high electrical conductivity, the obtained electrode exhibits fast charge and ion transport kinetics as well as full usage of active material. As expected, the 3 D Ti3C2Tx@PPY NW exhibits a specific capacitance five times higher than that of pristine MXene (610 F g−1), a good rate capability up to a current density of 25 A g−1, and excellent stability with 100 % retention after 14 000 cycles at 4 A g−1, outperforming the known state‐of‐the‐art MXene‐based supercapacitor. Our work provides a facile method for enhancing the performance of MXene‐based energy storage devices.
- 17 August 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (36) , 17495-17502
An ultralight and flexible sodium titanate nanowire aerogel with superior sodium storage
An ultralight, conductive, and flexible 3D assembly of a metal oxide nanowire aerogel as an electrode for energy storage devices without additives and typically inconvenient flexible supported-substrates remains a challenge. Herein, we report a new 3D highly ordered layer-by-layer stacking sodium titanate@reduced graphene oxide core–shell (NTO@GCS) nanowire aerogel that has an ultra-high aspect ratio with a diameter of 30–50 nm and typical length up to 100 μm for a new class of convenient sodium-ion battery (SIB) anodes. The formation mechanism of the unique 3D NTO nanowire aerogel, the precursor of the NTO@GCS aerogel, was carefully proposed, demonstrating that the key challenge for this synthesis strategy was to form a stable and homogeneous ultrafine NTO nanotube gel suspension. In addition, for high performance sodium-ion storage, reduced graphene oxides (rGOs) were introduced into the NTO aerogel backbone. The critical role of the graphene structure between the NTO nanowires and rGO sheets in Na+ storage was systematically investigated. Compared to the 3D pristine NTO aerogel and 3D NTO nanowires on graphene sheet paper, the 3D interconnected NTO–GCS aerogel electrode facilitated rapid ion/electrolyte transportation, resulting in remarkably enhanced Na+ storage with a reversible capacity of 240 mA h g−1 at 0.2C and durable cycling stability after 4900 cycles at a rate of 2 and 4C with nearly 100% coulombic efficiency.
- 17 August 2018
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 6 (36) , 17495-17502
An ultralight and flexible sodium titanate nanowire aerogel with superior sodium storage
An ultralight, conductive, and flexible 3D assembly of a metal oxide nanowire aerogel as an electrode for energy storage devices without additives and typically inconvenient flexible supported-substrates remains a challenge. Herein, we report a new 3D highly ordered layer-by-layer stacking sodium titanate@reduced graphene oxide core–shell (NTO@GCS) nanowire aerogel that has an ultra-high aspect ratio with a diameter of 30–50 nm and typical length up to 100 μm for a new class of convenient sodium-ion battery (SIB) anodes. The formation mechanism of the unique 3D NTO nanowire aerogel, the precursor of the NTO@GCS aerogel, was carefully proposed, demonstrating that the key challenge for this synthesis strategy was to form a stable and homogeneous ultrafine NTO nanotube gel suspension. In addition, for high performance sodium-ion storage, reduced graphene oxides (rGOs) were introduced into the NTO aerogel backbone. The critical role of the graphene structure between the NTO nanowires and rGO sheets in Na+ storage was systematically investigated. Compared to the 3D pristine NTO aerogel and 3D NTO nanowires on graphene sheet paper, the 3D interconnected NTO–GCS aerogel electrode facilitated rapid ion/electrolyte transportation, resulting in remarkably enhanced Na+ storage with a reversible capacity of 240 mA h g−1 at 0.2C and durable cycling stability after 4900 cycles at a rate of 2 and 4C with nearly 100% coulombic efficiency.
- 30 January 2018
- Published by Wiley in Advanced Energy Materials
- Vol. 8 (15)
Anion–Cation Double Substitution in Transition Metal Dichalcogenide to Accelerate Water Dissociation Kinetic for Electrocatalysis
Until now, many works have shown that the hydrogen evolution reaction (HER) performance can be improved by anion or cation substitution into the crystal lattice of pyrite‐structure materials. However, the synergistic effects of anion–cation double substitution for overall enhancement of the catalytic activity remains questionable. Here, the simultaneous incorporation of vanadium and phosphorus into the CoS2 moiety for preparing 3D mesoporous cubic pyrite‐metal Co1‐xVxSP is presented. It is demonstrated that the higher catalytic activity of CoS2 after V incorporation can be primarily attributed to abundance active sites, whereas P substitution is responsible for improving HER kinetics and intrinsic catalyst. Interestingly, due to the synergistic effect of P–V double substitution, the 3D Co1‐xVxSP shows superior electrocatalysis toward the HER with a very small overpotential of 55 mV at 10 mA cm−2, a small Tafel slope of 50 mV dec−1, and a high turnover frequency of 0.45 H2 s−1 at 10 mA cm−2, which is very close to commercial 20% Pt/C. Density functional theory calculation reveals that the superior catalytic activity of the 3D Co1‐xVxSP is contributed by the reduced kinetic energy barrier of rate‐determining HER step as well as the promotion of the desorption H2 gas process.
- 30 January 2018
- Published by Wiley in Advanced Energy Materials
- Vol. 8 (15)
Anion–Cation Double Substitution in Transition Metal Dichalcogenide to Accelerate Water Dissociation Kinetic for Electrocatalysis
Until now, many works have shown that the hydrogen evolution reaction (HER) performance can be improved by anion or cation substitution into the crystal lattice of pyrite‐structure materials. However, the synergistic effects of anion–cation double substitution for overall enhancement of the catalytic activity remains questionable. Here, the simultaneous incorporation of vanadium and phosphorus into the CoS2 moiety for preparing 3D mesoporous cubic pyrite‐metal Co1‐xVxSP is presented. It is demonstrated that the higher catalytic activity of CoS2 after V incorporation can be primarily attributed to abundance active sites, whereas P substitution is responsible for improving HER kinetics and intrinsic catalyst. Interestingly, due to the synergistic effect of P–V double substitution, the 3D Co1‐xVxSP shows superior electrocatalysis toward the HER with a very small overpotential of 55 mV at 10 mA cm−2, a small Tafel slope of 50 mV dec−1, and a high turnover frequency of 0.45 H2 s−1 at 10 mA cm−2, which is very close to commercial 20% Pt/C. Density functional theory calculation reveals that the superior catalytic activity of the 3D Co1‐xVxSP is contributed by the reduced kinetic energy barrier of rate‐determining HER step as well as the promotion of the desorption H2 gas process.
- 27 July 2016
- Published by Wiley in ChemSusChem
- Vol. 9 (16) , 2261-2268
Enrichment of Pyrrolic Nitrogen by Hole Defects in Nitrogen and Sulfur Co‐Doped Graphene Hydrogel for Flexible Supercapacitors
The effect of the doping configuration and concentration of nitrogen (N) and sulfur (S) on the electrochemical performance of 3 D N and S co‐doped hole defect graphene hydrogel (NS‐HGH) electrodes is investigated. Surprisingly, by introducing a hole defect on the graphene surface, the difference in the doping concentrations of N and S can be used to effectively modulate the electrochemical behavior of the NS‐HGH. The hole defects provide a rapid ion diffusion path. Finally, we showed that the intriguing specific capacitance (536 F g−1) of the NS‐HGH could enhance the overall performance of the pseudocapacitance and electric double layer capacitance. The rational design of the NS‐HGH‐based flexible solid state supercapacitor results in not only outstanding electrochemical performance with a maximum energy density of 14.8 Wh kg−1 and power density of 5.2 KW kg−1 but also in extraordinary mechanical flexibility and excellent cycle stability.
- 27 July 2016
- Published by Wiley in ChemSusChem
- Vol. 9 (16) , 2261-2268
Enrichment of Pyrrolic Nitrogen by Hole Defects in Nitrogen and Sulfur Co‐Doped Graphene Hydrogel for Flexible Supercapacitors
The effect of the doping configuration and concentration of nitrogen (N) and sulfur (S) on the electrochemical performance of 3 D N and S co‐doped hole defect graphene hydrogel (NS‐HGH) electrodes is investigated. Surprisingly, by introducing a hole defect on the graphene surface, the difference in the doping concentrations of N and S can be used to effectively modulate the electrochemical behavior of the NS‐HGH. The hole defects provide a rapid ion diffusion path. Finally, we showed that the intriguing specific capacitance (536 F g−1) of the NS‐HGH could enhance the overall performance of the pseudocapacitance and electric double layer capacitance. The rational design of the NS‐HGH‐based flexible solid state supercapacitor results in not only outstanding electrochemical performance with a maximum energy density of 14.8 Wh kg−1 and power density of 5.2 KW kg−1 but also in extraordinary mechanical flexibility and excellent cycle stability.
- 5 January 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (6) , 4764-4769
Enhanced electrochemical performance of lamellar structured Co–Ni(OH) 2 /reduced graphene oxide (rGO) via hydrothermal synthesis
Lamellar Co–Ni(OH) 2 /rGO structures were synthesized and electrochemical properties were improved due to the unique structure and enhanced crystallinity. Also, exhibited long term stability even if high mass loading was used in electrode fabrication.
- 5 January 2016
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 6 (6) , 4764-4769
Enhanced electrochemical performance of lamellar structured Co–Ni(OH) 2 /reduced graphene oxide (rGO) via hydrothermal synthesis
Lamellar Co–Ni(OH) 2 /rGO structures were synthesized and electrochemical properties were improved due to the unique structure and enhanced crystallinity. Also, exhibited long term stability even if high mass loading was used in electrode fabrication.
- 22 December 2015
- Published by Wiley in Chemistry – A European Journal
- Vol. 22 (5) , 1652-1657
Design of Advanced MnO/N‐Gr 3D Walls through Polymer Cross‐Linking for High‐Performance Supercapacitor
Three‐dimensional, vertically aligned MnO/nitrogen‐doped graphene (3D MnO/N‐Gr) walls were prepared through facile solution‐phase synthesis followed by thermal treatment. Polyvinylpyrrolidone (PVP) was strategically added to generate cross‐links to simultaneously form 3D wall structures and to incorporate nitrogen atoms into the graphene network. The unique wall features of the as‐prepared 3D MnO/N‐Gr hybirdes provide a large surface area (91.516 m2 g−1) and allow for rapid diffusion of the ion electrolyte, resulting in a high specific capacitance of 378 F g−1 at 0.25 A g−1 and an excellent charge/discharge stability (93.7 % capacity retention after 8000 cycles) in aqueous 1 m Na2SO4 solution as electrolyte. Moreover, the symmetric supercapacitors that were rationally designed by using 3D MnO/N‐Gr hybrids exhibit outstanding electrochemical performance in an organic electrolyte with an energy density of 90.6 Wh kg−1 and a power density of 437.5 W kg−1.
- 22 December 2015
- Published by Wiley in Chemistry – A European Journal
- Vol. 22 (5) , 1652-1657
Design of Advanced MnO/N‐Gr 3D Walls through Polymer Cross‐Linking for High‐Performance Supercapacitor
Three‐dimensional, vertically aligned MnO/nitrogen‐doped graphene (3D MnO/N‐Gr) walls were prepared through facile solution‐phase synthesis followed by thermal treatment. Polyvinylpyrrolidone (PVP) was strategically added to generate cross‐links to simultaneously form 3D wall structures and to incorporate nitrogen atoms into the graphene network. The unique wall features of the as‐prepared 3D MnO/N‐Gr hybirdes provide a large surface area (91.516 m2 g−1) and allow for rapid diffusion of the ion electrolyte, resulting in a high specific capacitance of 378 F g−1 at 0.25 A g−1 and an excellent charge/discharge stability (93.7 % capacity retention after 8000 cycles) in aqueous 1 m Na2SO4 solution as electrolyte. Moreover, the symmetric supercapacitors that were rationally designed by using 3D MnO/N‐Gr hybrids exhibit outstanding electrochemical performance in an organic electrolyte with an energy density of 90.6 Wh kg−1 and a power density of 437.5 W kg−1.