Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ashish Vashishtha has a total of 69 co-authors. Here are the top co-authors by number of shared publications:

  • Dean Callaghan

    Department of Aerospace and Mechanical Engineering, South East Technological University, Carlow, Ireland

    7 shared publications
  • Cathal Nolan

    South East Technological University, Carlow, Ireland

    4 shared publications
  • Kojiro Suzuki

    Department of Advanced Energy, The University of Tokyo

    3 shared publications
  • M. Kamaraj

    Department of Metallurgical and Material Engineering, Indian Institute of Technology, Chennai, India

    3 shared publications
  • Ramesh Raghavendra

    SEAM Research Centre, School of Engineering, South East Technological University, Waterford, Ireland

    3 shared publications
  • Yasumasa Watanabe

    Department of Aeronautics and Astronautics, Graduate School of Engineering, The University of Tokyo

    3 shared publications

Latest Publications

  • Computational Investigation on Scramjet Combustor with Dual-Strut and Cavity-Based Model

    by Dinesh Kumar Bajaj, Krishna Reddy Kandula, Sakshi Kansara, Ashish Vashishtha, Devabrata Sahoo


  • Open Access

    Combustion Behaviour of ADN-Based Green Solid Propellant with Metal Additives: A Comprehensive Review and Discussion

    by Rushikesh Kore, Ashish Vashishtha

    Solid propellants play a crucial role in various civil, scientific, and defence-related aerospace propulsion applications due to their efficient energy release, high energy density, low fabrication cost, and ease of operation. Ammonium dinitramide (ADN) has gained considerable attention as a potential oxidizer for green solid propellants due to its high oxygen content, significant energy density, non-toxicity, and non-polluting combustion products, leading to lower environmental impact. As ADN is a new desirable oxidizer in the field of solid propellants, understanding the practicality and viability of the use of ADN in composite solid propellants necessitates a thorough understanding of its chemical and thermal decomposition pathways in addition to its combustion characteristics in the presence of other ingredients. ADN is being explored as an alternative to the traditionally used ammonium perchlorate (AP), a toxic oxidizer containing chlorine (Cl). Additionally, AP monopropellants often suffer from moderate burning rates and poor mechanical strength. To address these limitations, researchers have explored the incorporation of metal additives, such as aluminium (Al), magnesium (Mg), and metalloid boron (B), to enhance the combustion performance and burn rate of AP. These metals not only act as energy-rich additives but also influence the combustion process through various mechanisms. The incorporation of metal additives into ADN has shown promising enhancements in the overall energetic performance of green solid propellants. This review aims to provide an in-depth analysis of the thermal decomposition of ADN and its combustion behaviour, along with the combustion of ADN-based solid propellants with metal additives. Finally, based on an extensive review of the existing literature, various research pathways for focused future collaborative efforts are identified to further advance ADN-based “green” solid propellants.


  • Open Access

    CFD Investigation of a Co-Flow Nozzle for Cold Spray Additive Manufacturing Applications

    by Amit Kumar Sharma, Ashish Vashishtha, Dean Callaghan, Srinivasan Rao Bakshi, M. Kamaraj, Ramesh Raghavendra

    This current work evaluates the efficacy of a co-flow nozzle for cold spray applications with the aim of mitigating nozzle clogging issues, which can occur during long-duration operations, by replacing the solid wall of a divergent nozzle section with an annular co-flow fluid boundary. Simulations were conducted on high-pressure nitrogen flowing through convergent–divergent (C–D) axisymmetric nozzles, with a stagnation pressure of 6 MPa and a stagnation temperature of 1273 K. In these simulations, Inconel 718 particles of varying sizes (15 µm to 35 µm) were modeled using a 2-way Lagrangian technique, and the model’s accuracy was confirmed through validation against experimental results. An annular co-flow nozzle with a circular cross section and straight passage covering the primary C–D nozzle has been designed and modeled for cold spray application. Co-flow was introduced to the reduced nozzle length to compensate for particle velocity loss at higher operating conditions. It was found that co-flow facilitates momentum preservation for primary flow by providing an annular gas boundary, resulting in increased particle speed for a longer axial distance beyond the nozzle exit of the reduced divergent length nozzle. The particle acceleration performance of the reduced divergent section nozzle, when combined with co-flow, is comparable to the original length nozzle.


  • A Concept of Aerospike Nozzle for Cold Spray Additive Manufacturing—Towards a Potential Solution for Preventing the Issue of Clogging

    by Rija Nrina Raoelison, Sabeur Msolli, Sihao Deng, Ashish Vashishtha, Amit Sharma, Dean Callaghan, Wassim Zaim-Mounajed, Teng Zhang, Essolé Padayodi, Jean-Claude Sagot, et al.

    The clogging, a frequent gas passage deformation phenomenon because of powder accumulation on inner nozzle wall, is a major issue in long duration Cold Spray (CS) operations and a major challenge for Cold spray technology to be adopted for additive manufacturing. This study aims to design and integrate new nozzle design in Cold Spray operations for addressing the clogging issues in traditional circular convergent-divergent (CD) nozzles. The concept of the Aerospike nozzle is proposed for that purpose and is investigated using numerical simulation methods in this paper. An aerospike nozzle allows gases to accelerate externally bounded by environment on one-side and contoured spike wall on other side. After accelerating along the spike wall, aerospike nozzle can generate a longer supersonic gas stream. The spike region can be truncated near the tip to provide a flat face for powder injection. This proposed strategy will allow powder particles to accelerate through a longer supersonic core region, without interacting with nozzle wall. With appropriate operating parameters, an aerospike nozzle can reduce or eliminate the clogging issue completely. The efficiency and operation of aerospike nozzle is compared with same Mach number C-D nozzle using numerical simulations at stagnation pressure of 30 bar and temperature of 623K, where the aluminium powder particles are injected at 30 g/min in the centerline of both nozzles and are accelerated to similar velocities. The powder particles are accelerated in supersonic core region of aerospike nozzle without interacting with nozzle wall, it is concluded that the aerospike nozzle can be a promising nozzle design to provide clogging free long duration CS operations.


  • Open Access

    Investigation of a Modified Circular Nozzle for Cold Spray Applications

    by Amit Kumar Sharma, Ashish Vashishtha, Dean Callaghan, Srinivasan Rao Bakshi, M. Kamaraj, Ramesh Raghavendra

    The current work numerically evaluates the efficacy of a coflowing nozzle for cold spray applications with the aim to mitigate nozzle clogging by reducing the length of its divergent section. The high-pressure nitrogen flow through convergentdivergent axis-symmetric nozzles was simulated and the particle acceleration is modelled using a 2-way Lagrangian technique which is validated using experimental results. An annular co-flow nozzle with a circular central nozzle has been modelled for nitrogen gas. Reduction of nozzle divergent length from 189 mm to 99 mm showed an approximate 2.2% drop in particle velocity at high pressure operation while no variation at lower pressure operation was observed. Co-flow was introduced to the reduced nozzle length to compensate for particle velocity loss at higher operating conditions and it was found that co-flow facilitates momentum preservation for primary flow resulting in increased particle speed for a longer axial distance after the nozzle exit. The reduced divergent section nozzle, when combined with co-flow, is comparable to the original length nozzle.


  • Detached Eddy Simulation of Unsteady Flow over a Frontal Cavity

    by Samruddhi P. Salunke, Suryapratap S. Shinde, Ishika A. Singh, Devabrata Sahoo, Ashish Vashishtha

    View Video Presentation: https://doi.org/10.2514/6.2023-0997.vid Frontal cavity consists of complex unsteadiness which causes bow shock instabilities when the body is moving at supersonic or hypersonic speed through a fluid. These complex unsteady flow fields are an important practical concern in the aerospace applications. Understanding this flow field around the frontal cavity will help us to know more in depth about these instabilities to create effective control methods to avoid structural damages. The main objective of the present research is to analyze the bow shock instabilities at different Mach number around the frontal cavity at supersonic and hypersonic speeds by using the numerical concept of Detached Eddy Simulations (DES) in two dimensional axisymmetric domain. Three different freestream Mach numbers (2, 4 and 6) were considered in the present investigation in order to study the effect of Mach number on flow unsteadiness. It was observed that an increase in Mach number, the frequency of most dominant mode (bow shock pulsation) increases significantly. In addition to that, additional low amplitude sub-dominant modes were observed for all the cases of freestream Mach numbers studied in the present investigation.

  • Open Access

    Mach number dependence of flow instability around a spiked body

    by Ashish Vashishtha, Shashank Khurana

    A forward-facing aerospike have been identified as a passive flow control device for enhancing the aerodynamic efficiency and reducing the heat transfer in high