So-Jin Park
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
So-Jin Park has a total of 89 co-authors. Here are the top co-authors by number of shared publications:
In-Chan Hwang
Department of Chemical Engineering, Chungnam National University, 99 Daehak-ro, Yuseong-gu, Daejeon, 305-764, Republic of Korea
12 shared publicationsKyeong-Ho Lee
Chungnam National University
5 shared publications- Young-Yoon Choi
Minerals and Materials Processing Division, Korea Institute of Geoscience and Mineral Resources, Daejeon 305-350, Republic of Korea
4 shared publications Chan Woo Park
Decommissioning Technology Research Division, Korea Atomic Energy Research Institute, 989-111, Daedeokdae-ro, Yuseong-gu, Daejeon, 34057, Republic of Korea
3 shared publicationsHyeon-Deok Kim
Department of Chemical Engineering, Chungnam National University, 220 Gung-Dong, Yuseong-Gu, Daejeon, 305-764, Republic of Korea
3 shared publicationsManju Rani
Department of Chemical Engineering, Deenbandhu Chhotu Ram University of Science and Technology, Murthal, Haryana, India
3 shared publications
Latest Publications
- 6 May 2021
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 38 (5) , 1006-1013
Solid-liquid equilibrium and kinematic viscosity of binary mixture of fatty acid alkyl esters
- 6 May 2021
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 38 (5) , 1006-1013
Solid-liquid equilibrium and kinematic viscosity of binary mixture of fatty acid alkyl esters
- 27 June 2020
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (28) , 35580-35590
Cs desorption behavior during hydrothermal treatment of illite with oxalic acid
The desorption of radioactive cesium (Cs) in soil is influenced by the clay mineral type, adsorption site, and concentration of Cs. In this study, experiments to detect desorption of non-radioactive and radioactive Cs from illite using oxalic acid were performed for 2 days at 70 °C in hydrothermal conditions. The results showed that the 133Cs removal efficiency by oxalic acid and inorganic acid treatment was similar at high concentration (22.86 mmol/kg) of non-radioactive 133Cs. In the radioactive 137Cs experiment, the removal efficiency by oxalic acid was higher than that by inorganic acid at low concentration (0.79 × 10−6 mmol/kg) of radioactive 137Cs. Based on the illite hypothetical frayed edge site (FES) concentration of 0.612 mmol/kg, the results suggested that 137Cs was preferentially adsorbed to FES on illite. The 137Cs at low concentration was difficult to remove because it was irreversible adsorption to FES, while the non-radioactive Cs at high concentration was mainly adsorbed to planar sites, and so was easy to desorb by ion exchange. Based on the results of NMR, FTIR, and XPS analyses, we concluded that the higher efficiency of 137Cs removal at low concentration by oxalic acid treatment than by treatment with inorganic acid was because of chelation effects associated with the complexation of oxalic acid (ligands) and metal ions in irreversible site (FES).
- 27 June 2020
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (28) , 35580-35590
Cs desorption behavior during hydrothermal treatment of illite with oxalic acid
The desorption of radioactive cesium (Cs) in soil is influenced by the clay mineral type, adsorption site, and concentration of Cs. In this study, experiments to detect desorption of non-radioactive and radioactive Cs from illite using oxalic acid were performed for 2 days at 70 °C in hydrothermal conditions. The results showed that the 133Cs removal efficiency by oxalic acid and inorganic acid treatment was similar at high concentration (22.86 mmol/kg) of non-radioactive 133Cs. In the radioactive 137Cs experiment, the removal efficiency by oxalic acid was higher than that by inorganic acid at low concentration (0.79 × 10−6 mmol/kg) of radioactive 137Cs. Based on the illite hypothetical frayed edge site (FES) concentration of 0.612 mmol/kg, the results suggested that 137Cs was preferentially adsorbed to FES on illite. The 137Cs at low concentration was difficult to remove because it was irreversible adsorption to FES, while the non-radioactive Cs at high concentration was mainly adsorbed to planar sites, and so was easy to desorb by ion exchange. Based on the results of NMR, FTIR, and XPS analyses, we concluded that the higher efficiency of 137Cs removal at low concentration by oxalic acid treatment than by treatment with inorganic acid was because of chelation effects associated with the complexation of oxalic acid (ligands) and metal ions in irreversible site (FES).
- Open Access
Hydrothermal Desorption of Cs with Oxalic Acid from Hydrobiotite and Wastewater Treatment by Chemical Precipitation
A hydrobiotite (HBT) clay contains more cesium (Cs)-specific adsorption sites than illitic clay, and the capacity of frayed edge sites can increase as the weathering of micaceous minerals proceeds. Thus, Cs can be selectively adsorbed to HBT clay. In this study, we investigated the removal efficiency of non-radioactive (133Cs) and radioactive (137Cs) Cs from HBT, using oxalic acid. We found the minimum optimal concentration of 0.15 M oxalic acid removed more than 90% of Cs. Subsequently, cations and Cs ions were removed using Ca(OH)2 and sodium tetraphenylborate (NaTPB) to treat the washing wastewater generated at the optimum concentration of the desorbent (0.15 M oxalic acid). In order to remove cations and heavy metal ions in the waste solution, Ca(OH)2 was treated at a mass ratio of 0.025 g/mL and pH 9–10 to derive optimal conditions. As a final step, to remove Cs, NaTPB was treated with a mass ratio of 2 mg/mL and reduced to below 0.1 mg/L Cs to find the optimal dose. The novelty of this study is that the amount of radioactive waste can be drastically reduced by removing the non-radioactive cations and heavy metals separately in the first step and removing the remaining radioactive Cs in the second step.
Open AccessHydrothermal Desorption of Cs with Oxalic Acid from Hydrobiotite and Wastewater Treatment by Chemical Precipitation
A hydrobiotite (HBT) clay contains more cesium (Cs)-specific adsorption sites than illitic clay, and the capacity of frayed edge sites can increase as the weathering of micaceous minerals proceeds. Thus, Cs can be selectively adsorbed to HBT clay. In this study, we investigated the removal efficiency of non-radioactive (133Cs) and radioactive (137Cs) Cs from HBT, using oxalic acid. We found the minimum optimal concentration of 0.15 M oxalic acid removed more than 90% of Cs. Subsequently, cations and Cs ions were removed using Ca(OH)2 and sodium tetraphenylborate (NaTPB) to treat the washing wastewater generated at the optimum concentration of the desorbent (0.15 M oxalic acid). In order to remove cations and heavy metal ions in the waste solution, Ca(OH)2 was treated at a mass ratio of 0.025 g/mL and pH 9–10 to derive optimal conditions. As a final step, to remove Cs, NaTPB was treated with a mass ratio of 2 mg/mL and reduced to below 0.1 mg/L Cs to find the optimal dose. The novelty of this study is that the amount of radioactive waste can be drastically reduced by removing the non-radioactive cations and heavy metals separately in the first step and removing the remaining radioactive Cs in the second step.
- 28 May 2020
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 37 (7) , 1181-1194
Measurement and correlation of thermodynamic properties of ternary mixtures of oxygenated fuel
- 28 May 2020
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 37 (7) , 1181-1194
Measurement and correlation of thermodynamic properties of ternary mixtures of oxygenated fuel
- 13 November 2019
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 36 (11) , 1922-1931
Measurement and modeling of transport properties of binary liquid mixtures containing oxygenates and n-alkanes
- 13 November 2019
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 36 (11) , 1922-1931
Measurement and modeling of transport properties of binary liquid mixtures containing oxygenates and n-alkanes
- Open Access
Colorimetric Method for Detection of Hydrazine Decomposition in Chemical Decontamination Process
The aim of nuclear facility decommissioning is to make local settlements safe, sustainable and professedly acceptable. The challenges are the clean-up of the nuclear site and waste management. This means a definite promise in terms of safety and security, taking into account social and environmental accountability. There is an essential need to develop safe and efficient methods for nuclear decommissioning. Thus, chemical decontamination technology is of great significance to the decommissioning of nuclear energy facilities. In particular, chemical decontamination technology is applicable to the pipelines and internal loop. The iron-rich oxides, such as Fe3O4 or NiOFe2O3, of a nuclear power plant should have sound decontamination follow-through and should put through a very small amount of secondary waste. It is important to be able to detect and quantify hydrazine in decontamination situations with high sensitivity and selectivity. A colorimetric assay is a technique used to determine the concentration of colored compounds in a solution. However, detecting targeted species rapidly and easily, and with high sensitivity and specificity, is still challenging. Here, the catalytic reaction of oxidants in the p-dimethylaminobenzaldehyde and hydrazine reaction is elucidated. Oxidants can catalyze the reaction of hydrazine and p-dimethylaminobenzaldehyde to form an azine complex such as p-dimethylaminobenzaldazine, with high selectivity and sensitivity within 30 min at ambient temperatures. In the absence of an oxidant such as iron or hydrogen peroxide no detectable colorimetric change was observed by the reaction of p-dimethylaminobenzaldehyde and hydrazine unless an external oxidant was present in the system. In this study, we demonstrated a colorimetric method for the sensitive detection of hydrazine decomposition in the chemical decontamination process. Furthermore, the colorimetric response was easy to monitor with the unaided eye, without any sophisticated instrumentation. This method is thus suitable for on-site detection of contamination in a nuclear facility. In addition, this colorimetric method is convenient, non-invasive, free of complex equipment, and low-cost, making it possible to analyze hydrazine in industrial nuclear facilities. The proposed method was successfully applied to the determination of hydrazine decomposition in the nuclear decontamination process.
Open AccessColorimetric Method for Detection of Hydrazine Decomposition in Chemical Decontamination Process
The aim of nuclear facility decommissioning is to make local settlements safe, sustainable and professedly acceptable. The challenges are the clean-up of the nuclear site and waste management. This means a definite promise in terms of safety and security, taking into account social and environmental accountability. There is an essential need to develop safe and efficient methods for nuclear decommissioning. Thus, chemical decontamination technology is of great significance to the decommissioning of nuclear energy facilities. In particular, chemical decontamination technology is applicable to the pipelines and internal loop. The iron-rich oxides, such as Fe3O4 or NiOFe2O3, of a nuclear power plant should have sound decontamination follow-through and should put through a very small amount of secondary waste. It is important to be able to detect and quantify hydrazine in decontamination situations with high sensitivity and selectivity. A colorimetric assay is a technique used to determine the concentration of colored compounds in a solution. However, detecting targeted species rapidly and easily, and with high sensitivity and specificity, is still challenging. Here, the catalytic reaction of oxidants in the p-dimethylaminobenzaldehyde and hydrazine reaction is elucidated. Oxidants can catalyze the reaction of hydrazine and p-dimethylaminobenzaldehyde to form an azine complex such as p-dimethylaminobenzaldazine, with high selectivity and sensitivity within 30 min at ambient temperatures. In the absence of an oxidant such as iron or hydrogen peroxide no detectable colorimetric change was observed by the reaction of p-dimethylaminobenzaldehyde and hydrazine unless an external oxidant was present in the system. In this study, we demonstrated a colorimetric method for the sensitive detection of hydrazine decomposition in the chemical decontamination process. Furthermore, the colorimetric response was easy to monitor with the unaided eye, without any sophisticated instrumentation. This method is thus suitable for on-site detection of contamination in a nuclear facility. In addition, this colorimetric method is convenient, non-invasive, free of complex equipment, and low-cost, making it possible to analyze hydrazine in industrial nuclear facilities. The proposed method was successfully applied to the determination of hydrazine decomposition in the nuclear decontamination process.
- 2 September 2019
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 36 (9) , 1401-1409
Measurement and modeling of viscosity for binary mixtures of diisopropyl ether with n-alkanes (C7–C10)
- 2 September 2019
- Published by Springer Nature in Korean Journal of Chemical Engineering
- Vol. 36 (9) , 1401-1409
Measurement and modeling of viscosity for binary mixtures of diisopropyl ether with n-alkanes (C7–C10)
- 6 December 2018
- Published by Wiley in Surface and Interface Analysis
- Vol. 51 (4) , 408-412
Pattern formation using polystyrene benzaldimine self‐assembled monolayer by soft X‐ray
A nanopatterning fabrication by soft X‐ray generated chemical construction of a polystyrene benzaldehydeimine monolayer has been carried out from the polystyrenebezaldehyde resin with (3‐aminopropyl) triethoxysilane for the first time. The molecular layer was exposed to soft X‐rays; the involved chemical modification on the monolayer was analyzed by using Fourier transform infrared spectroscopy‐attenuated total internal reflectance and contact angle measurement. As a result, we could confirm that the imine monolayer was cleaved upon the soft X‐ray irradiation, leaving the hydrophobic part, the imine functionality was changed into a new nonhydrolysable, and the hydrophilic amine functionality was established from the unexposed imine monolayer through acid hydrolysis. This above phenomenon is used for the patterning of self‐assembled monolayers. The microscope images revealed patterns as small as ≤52.4 nm with regular height and phase variations.
- 6 December 2018
- Published by Wiley in Surface and Interface Analysis
- Vol. 51 (4) , 408-412
Pattern formation using polystyrene benzaldimine self‐assembled monolayer by soft X‐ray
A nanopatterning fabrication by soft X‐ray generated chemical construction of a polystyrene benzaldehydeimine monolayer has been carried out from the polystyrenebezaldehyde resin with (3‐aminopropyl) triethoxysilane for the first time. The molecular layer was exposed to soft X‐rays; the involved chemical modification on the monolayer was analyzed by using Fourier transform infrared spectroscopy‐attenuated total internal reflectance and contact angle measurement. As a result, we could confirm that the imine monolayer was cleaved upon the soft X‐ray irradiation, leaving the hydrophobic part, the imine functionality was changed into a new nonhydrolysable, and the hydrophilic amine functionality was established from the unexposed imine monolayer through acid hydrolysis. This above phenomenon is used for the patterning of self‐assembled monolayers. The microscope images revealed patterns as small as ≤52.4 nm with regular height and phase variations.
- 1 October 2018
- Published by Elsevier in Fluid Phase Equilibria
- Vol. 473, 138-144
Solid-liquid equilibria and thermo-physical properties of liquid electrolyte systems for lithium ion batteries
- 1 October 2018
- Published by Elsevier in Fluid Phase Equilibria
- Vol. 473, 138-144
Solid-liquid equilibria and thermo-physical properties of liquid electrolyte systems for lithium ion batteries
- 29 September 2018
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 318 (2) , 1339-1345
A study on the removal of impurities in a SP-HyBRID decontamination wastewater of the primary coolant system in a pressurized water reactor
- 29 September 2018
- Published by Springer Nature in Journal of Radioanalytical and Nuclear Chemistry
- Vol. 318 (2) , 1339-1345
A study on the removal of impurities in a SP-HyBRID decontamination wastewater of the primary coolant system in a pressurized water reactor