Jiaojiao Xia
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiaojiao Xia has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Bin Zou
School of Food and Biological Engineering, Jiangsu University, Zhenjiang 212013, China
9 shared publications Chu Yanhong
School of Food and Biological Engineering, Jiangsu University, No. 301 Xuefu Road, Zhenjiang, 212013, China
2 shared publicationsDinghua Yu
2 shared publicationsHe Huang
2 shared publicationsYanhong Chu
Jiangsu University
2 shared publicationsYi Hu
2 shared publications
Latest Publications
- Open Access
Sequential Alcoholysis–Esterification Catalysis by Immobilized Lipases for the Synthesis of OPO Structured Lipids: Immobilization Methods, Carriers, and Prospects
OPO structural lipids (1, 3-dioleoyl-2-palmitoylglycerol) are the most abundant type of triglycerides in breast milk. They are beneficial for providing energy and calcium absorption for infants and can prevent constipation caused by the formation of insoluble calcium soaps. Currently, enzymatic synthesis of OPO mainly involves three routes: acid hydrolysis, ester exchange, and alcoholysis–esterification combined catalysis. The acid hydrolysis process completes in one step, and the product separation is simple, but it is limited by the migration of acyl groups, resulting in generally low OPO yields. The ester exchange process uses both the substrate and product as triglycerides, and the subsequent separation is costly. In contrast, lipase, as an oil–water interface enzyme, has higher activity in oil–water systems, and the combined catalytic route of first alcoholysis to prepare 2-monoglyceride and then esterification to introduce oleic acid is more likely to achieve a higher OPO yield. However, in the process of enzymatic synthesis of OPO, free lipases have the disadvantages of poor thermal stability, easy inactivation, and difficulty in recovery, and immobilization is a key strategy to improve their industrial applicability in combined processes. This paper focuses on the research progress of immobilized lipases in the enzymatic synthesis of OPO structural lipids, systematically reviews the principles, advantages, and limitations of the main immobilization methods, and compares the performance of carrier systems in terms of enzyme loading, catalytic activity, operational stability, and reusability. Finally, this paper looks forward to future directions such as composite immobilization strategies, multi-enzyme combined catalytic systems, and rational design of carrier structures, with the aim of providing theoretical references for the efficient and green enzymatic synthesis of OPO structural lipids.
Open AccessSequential Alcoholysis–Esterification Catalysis by Immobilized Lipases for the Synthesis of OPO Structured Lipids: Immobilization Methods, Carriers, and Prospects
OPO structural lipids (1, 3-dioleoyl-2-palmitoylglycerol) are the most abundant type of triglycerides in breast milk. They are beneficial for providing energy and calcium absorption for infants and can prevent constipation caused by the formation of insoluble calcium soaps. Currently, enzymatic synthesis of OPO mainly involves three routes: acid hydrolysis, ester exchange, and alcoholysis–esterification combined catalysis. The acid hydrolysis process completes in one step, and the product separation is simple, but it is limited by the migration of acyl groups, resulting in generally low OPO yields. The ester exchange process uses both the substrate and product as triglycerides, and the subsequent separation is costly. In contrast, lipase, as an oil–water interface enzyme, has higher activity in oil–water systems, and the combined catalytic route of first alcoholysis to prepare 2-monoglyceride and then esterification to introduce oleic acid is more likely to achieve a higher OPO yield. However, in the process of enzymatic synthesis of OPO, free lipases have the disadvantages of poor thermal stability, easy inactivation, and difficulty in recovery, and immobilization is a key strategy to improve their industrial applicability in combined processes. This paper focuses on the research progress of immobilized lipases in the enzymatic synthesis of OPO structural lipids, systematically reviews the principles, advantages, and limitations of the main immobilization methods, and compares the performance of carrier systems in terms of enzyme loading, catalytic activity, operational stability, and reusability. Finally, this paper looks forward to future directions such as composite immobilization strategies, multi-enzyme combined catalytic systems, and rational design of carrier structures, with the aim of providing theoretical references for the efficient and green enzymatic synthesis of OPO structural lipids.
- 9 May 2026
- Published by American Chemical Society (ACS) in Journal of Agricultural and Food Chemistry
- Vol. 74 (19) , 15219-15230
Lipase Immobilized in Hollow Mesoporous Carbon Spheres: Enzymatic Properties and Applications in the Production of Geranyl Acetate
In this study, we successfully synthesized two immobilized enzyme carrier: hollow mesoporous carbon spheres (HMCS) and mesoporous carbon spheres (MCS). The carriers were thoroughly characterized by using a range of techniques, including scanning electron microscopy, water contact angle measurement, and BET surface area analysis. HMCS exhibited a unique hollow structure, moderate hydrophobicity, and a larger specific surface area. The high-performance immobilized lipase, CRL@HMCS was prepared by using HMCS as the carrier. The basic enzymatic properties and reaction kinetic parameters of CRL@HMCS were studied. CRL@HMCS exhibited significantly higher catalytic efficiency, with a Vmax approximately 2.7-fold greater than that of the free CRL. Excellent operational stability was showed by retaining 64.14% of its relative activity after being reused 7 times and 84.05% after 22 days of storage. Under optimal conditions (45 °C, 200 rpm, 5 h), CRL@HMCS achieved a 70.4% yield in geranyl acetate synthesis, significantly higher than the free enzyme (48.65%).
- 9 May 2026
- Published by American Chemical Society (ACS) in Journal of Agricultural and Food Chemistry
- Vol. 74 (19) , 15219-15230
Lipase Immobilized in Hollow Mesoporous Carbon Spheres: Enzymatic Properties and Applications in the Production of Geranyl Acetate
In this study, we successfully synthesized two immobilized enzyme carrier: hollow mesoporous carbon spheres (HMCS) and mesoporous carbon spheres (MCS). The carriers were thoroughly characterized by using a range of techniques, including scanning electron microscopy, water contact angle measurement, and BET surface area analysis. HMCS exhibited a unique hollow structure, moderate hydrophobicity, and a larger specific surface area. The high-performance immobilized lipase, CRL@HMCS was prepared by using HMCS as the carrier. The basic enzymatic properties and reaction kinetic parameters of CRL@HMCS were studied. CRL@HMCS exhibited significantly higher catalytic efficiency, with a Vmax approximately 2.7-fold greater than that of the free CRL. Excellent operational stability was showed by retaining 64.14% of its relative activity after being reused 7 times and 84.05% after 22 days of storage. Under optimal conditions (45 °C, 200 rpm, 5 h), CRL@HMCS achieved a 70.4% yield in geranyl acetate synthesis, significantly higher than the free enzyme (48.65%).
- 22 April 2020
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 192 (1) , 132-145
Metal-Organic Frameworks Conjugated Lipase with Enhanced Bio-catalytic Activity and Stability
Covalent immobilization of lipase onto a solid carrier is an effective way to enhance stability. Immobilization inhibits the activity of lipase due to decreased flexibility of enzyme structure via the covalent bond. In this study, monomer of the metal-organic frameworks (MOFs) material ZIF-8 (2-methyl imidazole-4-carboxylic acid) was innovatively used as a chemical modifier of Candida nrugosa lipase (CRL). The circular dichroism spectra results show that the CRL molecule was altered by chemical modification and thus its catalytic activity was 1.3 times higher than that of the free CRL. The modified CRL molecule was further immobilized in the “skeleton” of ZIF-8 through the monomer while in situ forming the cell skeleton of the MOFs, which prevent the active center from being destroyed. The results show that conjugation of chemical modification and immobilized enzymes ensure that there was no obvious reduction in the activity of CRL after immobilization and the stability of CRL was improved. Especially, the organic solvent stability of the modified immobilization CRL in isopropanol was significantly improved and retained more than 148% of its activity.
- 22 April 2020
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 192 (1) , 132-145
Metal-Organic Frameworks Conjugated Lipase with Enhanced Bio-catalytic Activity and Stability
Covalent immobilization of lipase onto a solid carrier is an effective way to enhance stability. Immobilization inhibits the activity of lipase due to decreased flexibility of enzyme structure via the covalent bond. In this study, monomer of the metal-organic frameworks (MOFs) material ZIF-8 (2-methyl imidazole-4-carboxylic acid) was innovatively used as a chemical modifier of Candida nrugosa lipase (CRL). The circular dichroism spectra results show that the CRL molecule was altered by chemical modification and thus its catalytic activity was 1.3 times higher than that of the free CRL. The modified CRL molecule was further immobilized in the “skeleton” of ZIF-8 through the monomer while in situ forming the cell skeleton of the MOFs, which prevent the active center from being destroyed. The results show that conjugation of chemical modification and immobilized enzymes ensure that there was no obvious reduction in the activity of CRL after immobilization and the stability of CRL was improved. Especially, the organic solvent stability of the modified immobilization CRL in isopropanol was significantly improved and retained more than 148% of its activity.
- 22 April 2019
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 411 (13) , 2905-2914
Monocrotophos detection with a bienzyme biosensor based on ionic-liquid-modified carbon nanotubes
Acetylcholinesterase (AChE) biosensor technology is widely applied in the detection of organophosphate pesticides in agricultural production via the inhibition of AChE activity by organophosphates. However, the AChE electrode has some drawbacks, such as low stability and high overpotential. Combining the advantages of multiwalled carbon nanotubes (MWCNTs) and ionic liquids, we constructed a novel bienzyme electrode [Cl/iron porphyrin (FePP)-modified MWCNTs/AChE/glassy carbon electrode], which included AChE and mimetic oxidase FePP. In this electrode, FePP is covalently bound to the AChE carrier via ionic liquid for increased electrode sensitivity and stability. Under optimal conditions, this novel biosensor has a monocrotophos detection limit of 3.2 × 10–11 mol/L and good recovery of 89–104%. After 5 weeks of storage at 4 °C, the oxidation current was 97.8% of its original value. The biosensor has high stability and sensitivity for monocrotophos detection and is a promising device for monitoring food safety.
- 22 April 2019
- Published by Springer Nature in Analytical and Bioanalytical Chemistry
- Vol. 411 (13) , 2905-2914
Monocrotophos detection with a bienzyme biosensor based on ionic-liquid-modified carbon nanotubes
Acetylcholinesterase (AChE) biosensor technology is widely applied in the detection of organophosphate pesticides in agricultural production via the inhibition of AChE activity by organophosphates. However, the AChE electrode has some drawbacks, such as low stability and high overpotential. Combining the advantages of multiwalled carbon nanotubes (MWCNTs) and ionic liquids, we constructed a novel bienzyme electrode [Cl/iron porphyrin (FePP)-modified MWCNTs/AChE/glassy carbon electrode], which included AChE and mimetic oxidase FePP. In this electrode, FePP is covalently bound to the AChE carrier via ionic liquid for increased electrode sensitivity and stability. Under optimal conditions, this novel biosensor has a monocrotophos detection limit of 3.2 × 10–11 mol/L and good recovery of 89–104%. After 5 weeks of storage at 4 °C, the oxidation current was 97.8% of its original value. The biosensor has high stability and sensitivity for monocrotophos detection and is a promising device for monitoring food safety.
- 12 November 2018
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 42 (2) , 279-290
Biomimetic oxidase sensor based on functionalized surface of carbon nanotubes and iron prophyrins for catechol detection
A novel and highly stable biomimetic oxidase sensor system was designed for catehol detection. FePP used as biomimetic horseradish peroxidase (HRP) was immobilized onto modified multi-walled carbon nanotubes (MWCNTs). Functional groups such as –OH, –NH2 and –COOH were introduced onto the surface of MWCNTs to provide biomimetic microenvironment for iron porphyrins (FePP). Stable biomimetic enzyme electrode has been developed to detect catechol as a simple, economical and efficient method. At optimal condition, the detection limit of OH-MWCNTs/FePP/Nafion was 3.754 × 10− 6 M. After stored at − 4 °C for 35 days, the oxidation current value still maintained 98.3% of initial activity. In repetitive nature test, relative standard deviation (RSD) of oxidation current remained within 1.0% after ten consecutive measurements in the same concentration of catechol solution, while most of reported oxidase sensor was within 2.0% under the same condition.
- 12 November 2018
- Published by Springer Nature in Bioprocess and Biosystems Engineering
- Vol. 42 (2) , 279-290
Biomimetic oxidase sensor based on functionalized surface of carbon nanotubes and iron prophyrins for catechol detection
A novel and highly stable biomimetic oxidase sensor system was designed for catehol detection. FePP used as biomimetic horseradish peroxidase (HRP) was immobilized onto modified multi-walled carbon nanotubes (MWCNTs). Functional groups such as –OH, –NH2 and –COOH were introduced onto the surface of MWCNTs to provide biomimetic microenvironment for iron porphyrins (FePP). Stable biomimetic enzyme electrode has been developed to detect catechol as a simple, economical and efficient method. At optimal condition, the detection limit of OH-MWCNTs/FePP/Nafion was 3.754 × 10− 6 M. After stored at − 4 °C for 35 days, the oxidation current value still maintained 98.3% of initial activity. In repetitive nature test, relative standard deviation (RSD) of oxidation current remained within 1.0% after ten consecutive measurements in the same concentration of catechol solution, while most of reported oxidase sensor was within 2.0% under the same condition.
- 1 November 2018
- Published by Elsevier in Analytical Biochemistry
- Vol. 560, 12-18
Acetylcholinesterase biosensor based on functionalized surface of carbon nanotubes for monocrotophos detection
- 1 November 2018
- Published by Elsevier in Analytical Biochemistry
- Vol. 560, 12-18
Acetylcholinesterase biosensor based on functionalized surface of carbon nanotubes for monocrotophos detection
- 16 December 2017
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 185 (3) , 606-618
Immobilization of Lipase by Ionic Liquid-Modified Mesoporous SiO2 Adsorption and Calcium Alginate-Embedding Method
Porcine pancreatic lipase (PPL) was immobilized onto functionalized ionic liquid-modified silica carrier using gelatinization and physical adsorption. The immobilized lipase was characterized with N2 adsorption–desorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR) before and after modification and immobilization. The results showed that the modification of the ionic liquid and the introduction of lipase had been successfully approved. The rate of enzymatic reaction and its influencing factors was primarily studied by enzymatic reaction kinetics. K m values of PPL-SiO2@CA and PPL-IM/BF4-SiO2@CA were 4.9 and 3.7 mg/ml, respectively. It indicated that the modification of the functionalized ionic liquid enhanced the affinity between the immobilized enzyme and the substrate. The immobilization efficiency, specific activity, optimum temperature, optimum pH, thermal stability, reusability, and storage stability of the immobilized enzyme were investigated. We found that the stability of the immobilized enzyme was significantly higher than that of the unmodified immobilized enzyme. Specially, PPL-IM/BF4-SiO2@CA maintained good thermal stability and retained more than 92% of its activity at 65 °C after preheating 3 h. Above, the immobilized lipase maintained more than 92% of its initial activity after incubating at 65 °C for 3 h.
- 16 December 2017
- Published by Springer Nature in Applied Biochemistry and Biotechnology
- Vol. 185 (3) , 606-618
Immobilization of Lipase by Ionic Liquid-Modified Mesoporous SiO2 Adsorption and Calcium Alginate-Embedding Method
Porcine pancreatic lipase (PPL) was immobilized onto functionalized ionic liquid-modified silica carrier using gelatinization and physical adsorption. The immobilized lipase was characterized with N2 adsorption–desorption, X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FT-IR) before and after modification and immobilization. The results showed that the modification of the ionic liquid and the introduction of lipase had been successfully approved. The rate of enzymatic reaction and its influencing factors was primarily studied by enzymatic reaction kinetics. K m values of PPL-SiO2@CA and PPL-IM/BF4-SiO2@CA were 4.9 and 3.7 mg/ml, respectively. It indicated that the modification of the functionalized ionic liquid enhanced the affinity between the immobilized enzyme and the substrate. The immobilization efficiency, specific activity, optimum temperature, optimum pH, thermal stability, reusability, and storage stability of the immobilized enzyme were investigated. We found that the stability of the immobilized enzyme was significantly higher than that of the unmodified immobilized enzyme. Specially, PPL-IM/BF4-SiO2@CA maintained good thermal stability and retained more than 92% of its activity at 65 °C after preheating 3 h. Above, the immobilized lipase maintained more than 92% of its initial activity after incubating at 65 °C for 3 h.
- 1 August 2014
- Published by Elsevier in Applied Surface Science
- Vol. 311, 62-67
Enhancing stabilities of lipase by enzyme aggregate coating immobilized onto ionic liquid modified mesoporous materials
- 1 August 2014
- Published by Elsevier in Applied Surface Science
- Vol. 311, 62-67
Enhancing stabilities of lipase by enzyme aggregate coating immobilized onto ionic liquid modified mesoporous materials
- 1 February 2011
- Published by Elsevier in Catalysis Communications
- Vol. 12 (6) , 544-547
Sulfated copper oxide: An efficient catalyst for dehydration of sorbitol to isosorbide
- 1 February 2011
- Published by Elsevier in Catalysis Communications
- Vol. 12 (6) , 544-547
Sulfated copper oxide: An efficient catalyst for dehydration of sorbitol to isosorbide
- 1 December 2010
- Published by Elsevier in Biochemical Engineering Journal
- Vol. 53 (1) , 150-153
Immobilization of porcine pancreatic lipase onto ionic liquid modified mesoporous silica SBA-15
- 1 December 2010
- Published by Elsevier in Biochemical Engineering Journal
- Vol. 53 (1) , 150-153
Immobilization of porcine pancreatic lipase onto ionic liquid modified mesoporous silica SBA-15