Malenahalli Halappa Naveen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Malenahalli Halappa Naveen has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Yoon-Bo Shim
Pusan National University
8 shared publications - Jin Ho Bang
Department of Applied Chemistry, Center for Bionano Intelligence Education and Research Hanyang University ERICA Ansan Gyeonggi‐do Republic of Korea
7 shared publications Rizwan Khan
Department of Bionano Technology, Hanyang University, 55 Hanyangdaehak-ro, Sangnok-gu, Ansan, Gyeonggi-do 15588, Republic of Korea
6 shared publications- Mohammad Bodiuzzaman
Center for Renewable Energy and Storage Technologies (CREST), Division of Physical Sciences and Engineering (PSE)
5 shared publications - Mutalifu Abulikemu
King Abdullah University of Science and Technology (KAUST)
5 shared publications - Omar F. Mohammed
King Abdullah University of Science and Technology (KAUST)
5 shared publications
Latest Publications
- 14 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (37) , 39523-39534
Ligand-Modulated Synthesis of High-Nuclearity Copper Nanoclusters Enables Photocatalytic Functionalization of C–Cl and C–F Bonds
The controlled synthesis of high-nuclearity copper nanoclusters (Cu NCs) remains a long-standing challenge due to the intrinsic lability, rapid redox cycling, and strong aggregation tendencies of Cu(I)–NCs. We introduce a BINAP (2,2′-bis(diphenylphosphino)-1,1′-binaphthyl)-assisted, thiolate-driven strategy that enables the ultrafast assembly of a high-nuclearity Cu NCs [Cu63(TBBT)44(CH3COOCH3)2(CH3CN)4(CH3OH)H14]3+ (Cu63). Notably, BINAP functions as a transient chelating ligand that stabilizes Cu(I), moderates reduction kinetics, and suppresses uncontrolled thiolate polymerization. The resulting Cu63 structure features a 12-atom Cu core capped by a Cu51(TBBT)44 (TBBT: 4-tert-butylbenzenethiol) shell containing well-defined surface vacancy defects that modulate ligand arrangement and electronic structure. Cu63 exhibits a broad absorption tail that extends continuously into the visible region, air stability, and favorable excited-state redox properties. These synergistic properties render the high-nuclearity Cu-cluster an effective photoredox catalyst for the activation of unactivated aryl chlorides and fluorides under mild conditions.
- 14 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (37) , 39523-39534
Ligand-Modulated Synthesis of High-Nuclearity Copper Nanoclusters Enables Photocatalytic Functionalization of C–Cl and C–F Bonds
The controlled synthesis of high-nuclearity copper nanoclusters (Cu NCs) remains a long-standing challenge due to the intrinsic lability, rapid redox cycling, and strong aggregation tendencies of Cu(I)–NCs. We introduce a BINAP (2,2′-bis(diphenylphosphino)-1,1′-binaphthyl)-assisted, thiolate-driven strategy that enables the ultrafast assembly of a high-nuclearity Cu NCs [Cu63(TBBT)44(CH3COOCH3)2(CH3CN)4(CH3OH)H14]3+ (Cu63). Notably, BINAP functions as a transient chelating ligand that stabilizes Cu(I), moderates reduction kinetics, and suppresses uncontrolled thiolate polymerization. The resulting Cu63 structure features a 12-atom Cu core capped by a Cu51(TBBT)44 (TBBT: 4-tert-butylbenzenethiol) shell containing well-defined surface vacancy defects that modulate ligand arrangement and electronic structure. Cu63 exhibits a broad absorption tail that extends continuously into the visible region, air stability, and favorable excited-state redox properties. These synergistic properties render the high-nuclearity Cu-cluster an effective photoredox catalyst for the activation of unactivated aryl chlorides and fluorides under mild conditions.
- Open Access
- 24 June 2026
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 8 (8) , 2210-2219
Stepwise Ligand Tuning of Copper Clusters for CO 2 Electroreduction Pathway Control
Copper-based materials with tailored surface modifications hold great potential for electrocatalytic CO2 reduction reactions (CO2RR), particularly in the selective formation of multicarbon (C2+) products. However, progress remains limited by an incomplete understanding of the atomic-level coordination environment and associated physicochemical properties. Here, we investigate ligand effects on CO2RR performance by a series of atomically precise Cu clusters–Cu6(X)6, where X represents the thiourea derivative. Notably, Cu6(N,N′-diphenylthiourea)6 achieves maximum Faradaic efficiency of 80.6% toward C2 products at 150 mA cm−2, demonstrating an optimized balance of multiple proton-coupled electron transfer pathways. In contrast, the incorporation of an electron-donating ligand (−NMe2) shifts approximately 30% of C2 products to CH4, while an electron-withdrawing ligand (−CF3) increases the proportion of C1 products driven by modified hydrophilicity and electron-donating capability. These findings provide critical insights into atomic-level surface engineering and offer valuable guidance for the rational design of CO2RR catalysts.
- 24 June 2026
- Published by American Chemical Society (ACS) in ACS Materials Letters
- Vol. 8 (8) , 2210-2219
Open AccessStepwise Ligand Tuning of Copper Clusters for CO 2 Electroreduction Pathway Control
Copper-based materials with tailored surface modifications hold great potential for electrocatalytic CO2 reduction reactions (CO2RR), particularly in the selective formation of multicarbon (C2+) products. However, progress remains limited by an incomplete understanding of the atomic-level coordination environment and associated physicochemical properties. Here, we investigate ligand effects on CO2RR performance by a series of atomically precise Cu clusters–Cu6(X)6, where X represents the thiourea derivative. Notably, Cu6(N,N′-diphenylthiourea)6 achieves maximum Faradaic efficiency of 80.6% toward C2 products at 150 mA cm−2, demonstrating an optimized balance of multiple proton-coupled electron transfer pathways. In contrast, the incorporation of an electron-donating ligand (−NMe2) shifts approximately 30% of C2 products to CH4, while an electron-withdrawing ligand (−CF3) increases the proportion of C1 products driven by modified hydrophilicity and electron-donating capability. These findings provide critical insights into atomic-level surface engineering and offer valuable guidance for the rational design of CO2RR catalysts.
- 19 August 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (35) , 31713-31721
High-Nuclearity Copper Molecular Catalysts for Electrocatalytic CO-to-Acetate Conversion
Ligand-modified metal nanoclusters (NCs) have emerged as candidate materials for catalysis owing to their well-defined yet tunable structure and their metal centers' high nuclearity. We posited that NC-based catalytic behavior will depend on ligand properties, the accessibility of active sites, and their atomic configuration. We synthesized a series of Cu NC-based catalysts, tuned local hydrophobicity through ligand adjustment, balanced the ligand coverage and active site exposure, and found that we were, in this way, able to engender efficient electrosynthesis of acetate via CO electroreduction. Computation and operando spectroscopy show that asymmetric Cu-Cu sites, which determine the CO binding strength, impact the bifurcation step after C-C coupling. The best of these catalysts, Cu13Nap, achieved an acetate Faradaic efficiency (FE) of 86% and an energy efficiency of 29% in a 5 bar system, exceeding the single C2+ FE of <50% previously achieved by NC-based catalysts.
- 19 August 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (35) , 31713-31721
High-Nuclearity Copper Molecular Catalysts for Electrocatalytic CO-to-Acetate Conversion
Ligand-modified metal nanoclusters (NCs) have emerged as candidate materials for catalysis owing to their well-defined yet tunable structure and their metal centers' high nuclearity. We posited that NC-based catalytic behavior will depend on ligand properties, the accessibility of active sites, and their atomic configuration. We synthesized a series of Cu NC-based catalysts, tuned local hydrophobicity through ligand adjustment, balanced the ligand coverage and active site exposure, and found that we were, in this way, able to engender efficient electrosynthesis of acetate via CO electroreduction. Computation and operando spectroscopy show that asymmetric Cu-Cu sites, which determine the CO binding strength, impact the bifurcation step after C-C coupling. The best of these catalysts, Cu13Nap, achieved an acetate Faradaic efficiency (FE) of 86% and an energy efficiency of 29% in a 5 bar system, exceeding the single C2+ FE of <50% previously achieved by NC-based catalysts.
- 31 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (32) , 28932-28942
Unshielded Ino Decahedral Core Copper Nanoclusters Enable Efficient Photocatalytic Sulfonylation of Aryl Halides
The synthesis of metal nanoclusters (NCs) having decahedral cores is challenging, with only a few reports primarily focusing on systems containing gold (Au) and silver (Ag). Herein, we present the synthesis, characterization, and catalytic activities of a copper (Cu) NC featuring a centered Ino decahedral core: Cu19(tBuPhCH2S)12(PPh3)6H6Br (Cu19). Unlike typical core-shell structured NCs, Cu19 exhibits a unique structure with a core capped by four motifs from four directions, where two square faces and both apexes of the Ino decahedron core are capped, leaving three square faces of the core exposed, acting as highly efficient catalytic active sites. This distinctive design opens new possibilities for catalytic applications of Cu NCs, as demonstrated experimentally in the sulfonylation of aryl halides under visible light irradiation at room temperature. Density functional theory (DFT) and experimental results suggest that the catalytic cycle proceeds through a single-electron transfer (SET) process between the photoexcited Cu19 NC-sulfinates and the aryl halide, enabling efficient C-S arylation of sulfinates. The unshielded Cu19 NC catalysts can be converted into a heterogeneous recyclable catalyst and are compatible with a wide range of aryl halides and sulfinate nucleophiles for producing sulfones.
- 31 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (32) , 28932-28942
Unshielded Ino Decahedral Core Copper Nanoclusters Enable Efficient Photocatalytic Sulfonylation of Aryl Halides
The synthesis of metal nanoclusters (NCs) having decahedral cores is challenging, with only a few reports primarily focusing on systems containing gold (Au) and silver (Ag). Herein, we present the synthesis, characterization, and catalytic activities of a copper (Cu) NC featuring a centered Ino decahedral core: Cu19(tBuPhCH2S)12(PPh3)6H6Br (Cu19). Unlike typical core-shell structured NCs, Cu19 exhibits a unique structure with a core capped by four motifs from four directions, where two square faces and both apexes of the Ino decahedron core are capped, leaving three square faces of the core exposed, acting as highly efficient catalytic active sites. This distinctive design opens new possibilities for catalytic applications of Cu NCs, as demonstrated experimentally in the sulfonylation of aryl halides under visible light irradiation at room temperature. Density functional theory (DFT) and experimental results suggest that the catalytic cycle proceeds through a single-electron transfer (SET) process between the photoexcited Cu19 NC-sulfinates and the aryl halide, enabling efficient C-S arylation of sulfinates. The unshielded Cu19 NC catalysts can be converted into a heterogeneous recyclable catalyst and are compatible with a wide range of aryl halides and sulfinate nucleophiles for producing sulfones.
- 19 May 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (13) , 3646-3658
Non-precious macrocycle embedded hybrid nanocomposites for efficient water oxidation
The development of efficient electrocatalysts for OER remains a challenge owing to issues such as unfavourable mass transport, reaction thermodynamics, and kinetics. In this study, we present a novel bio-inspired polymeric cobalt(II) phthalocyanine (Poly CoTAPc) as an effective OER catalyst. Mimicking the active sites of metalloenzymes involved in biological processes, Poly CoTAPc demonstrated exceptional catalytic activity and stability. To enhance the conductivity and maximize the exposure of active sites, Poly CoTAPc was combined with Ketjen black (KB) nanoparticles. The resulting Poly CoTAPc/KB composite was subsequently coated onto a nickel foam current collector. The fabricated Poly CoTAPc/KB/Ni electrode exhibited superior electrocatalytic performance compared with that of the benchmark catalyst IrO2 under alkaline conditions. Specifically, it achieved an overpotential of 306 mV, a low Tafel slope of 81 mV dec−1, and enhanced mass activity (22.72 A gmetal −1 at 1.58 V) and turnover frequency (TOF) (0.0122 s−1) for the OER. Additionally, the electrode demonstrated exceptional stability and maintained performance for over 30 hours. The Poly CoTAPc/KB electrocatalyst exhibited better electron transfer capacity and good stability. Moreover, its cost-effectiveness, use of very low amount of non-precious Co metal, and eco-friendliness make this catalyst highly efficient and promising compared with traditional metal-based catalysts in advancing OER catalysts for sustainable energy applications.
- 19 May 2025
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 9 (13) , 3646-3658
Non-precious macrocycle embedded hybrid nanocomposites for efficient water oxidation
The development of efficient electrocatalysts for OER remains a challenge owing to issues such as unfavourable mass transport, reaction thermodynamics, and kinetics. In this study, we present a novel bio-inspired polymeric cobalt(II) phthalocyanine (Poly CoTAPc) as an effective OER catalyst. Mimicking the active sites of metalloenzymes involved in biological processes, Poly CoTAPc demonstrated exceptional catalytic activity and stability. To enhance the conductivity and maximize the exposure of active sites, Poly CoTAPc was combined with Ketjen black (KB) nanoparticles. The resulting Poly CoTAPc/KB composite was subsequently coated onto a nickel foam current collector. The fabricated Poly CoTAPc/KB/Ni electrode exhibited superior electrocatalytic performance compared with that of the benchmark catalyst IrO2 under alkaline conditions. Specifically, it achieved an overpotential of 306 mV, a low Tafel slope of 81 mV dec−1, and enhanced mass activity (22.72 A gmetal −1 at 1.58 V) and turnover frequency (TOF) (0.0122 s−1) for the OER. Additionally, the electrode demonstrated exceptional stability and maintained performance for over 30 hours. The Poly CoTAPc/KB electrocatalyst exhibited better electron transfer capacity and good stability. Moreover, its cost-effectiveness, use of very low amount of non-precious Co metal, and eco-friendliness make this catalyst highly efficient and promising compared with traditional metal-based catalysts in advancing OER catalysts for sustainable energy applications.
- 19 September 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (39) , 26994-27005
Modulating Decarboxylative Oxidation Photocatalysis by Ligand Engineering of Atomically Precise Copper Nanoclusters
Copper nanoclusters (Cu NCs) characterized by their well-defined electronic and optical properties are an ideal platform for organic photocatalysis and exploring atomic-level behaviors. However, their potential as greener, efficient catalysts for challenging reactions like decarboxylative oxygenation under mild conditions remains unexplored. Herein, we present Cu13(Nap)3(PPh3)7H10 (hereafter Cu13Nap), protected by 1-naphthalene thiolate (Nap), which performs well in decarboxylative oxidation (90% yield) under photochemical conditions. In comparison, the isostructural Cu13(DCBT)3(PPh3)7H10 (hereafter Cu13DCBT), stabilized by 2,4-dichlorobenzenethiolate (DCBT), yields only 28%, and other previously reported Cu NCs (Cu28, Cu29, Cu45, Cu57, and Cu61) yield in the range of 6-18%. The introduction of naphthalene thiolate to the surface of Cu13 NCs influences their electronic structure and charge transfer in the ligand shell, enhancing visible light absorption and catalytic performance. Density functional theory (DFT) and experimental evidence suggest that the reaction proceeds primarily through an energy transfer mechanism. The energy transfer pathway is uncommon in the context of previous reports for decarboxylative oxidation reactions. Our findings suggest that strategically manipulating ligands holds significant potential for creating composite active sites on atomically precise copper NCs, resulting in enhanced catalytic efficacy and selectivity across various challenging reactions.
- 19 September 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (39) , 26994-27005
Modulating Decarboxylative Oxidation Photocatalysis by Ligand Engineering of Atomically Precise Copper Nanoclusters
Copper nanoclusters (Cu NCs) characterized by their well-defined electronic and optical properties are an ideal platform for organic photocatalysis and exploring atomic-level behaviors. However, their potential as greener, efficient catalysts for challenging reactions like decarboxylative oxygenation under mild conditions remains unexplored. Herein, we present Cu13(Nap)3(PPh3)7H10 (hereafter Cu13Nap), protected by 1-naphthalene thiolate (Nap), which performs well in decarboxylative oxidation (90% yield) under photochemical conditions. In comparison, the isostructural Cu13(DCBT)3(PPh3)7H10 (hereafter Cu13DCBT), stabilized by 2,4-dichlorobenzenethiolate (DCBT), yields only 28%, and other previously reported Cu NCs (Cu28, Cu29, Cu45, Cu57, and Cu61) yield in the range of 6-18%. The introduction of naphthalene thiolate to the surface of Cu13 NCs influences their electronic structure and charge transfer in the ligand shell, enhancing visible light absorption and catalytic performance. Density functional theory (DFT) and experimental evidence suggest that the reaction proceeds primarily through an energy transfer mechanism. The energy transfer pathway is uncommon in the context of previous reports for decarboxylative oxidation reactions. Our findings suggest that strategically manipulating ligands holds significant potential for creating composite active sites on atomically precise copper NCs, resulting in enhanced catalytic efficacy and selectivity across various challenging reactions.
- 23 March 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (13) , 15165-15175
Nanostructuring Matters: Stabilization of Electrocatalytic Oxygen Evolution Reaction Activity of ZnCo2O4 by Zinc Leaching
Despite the enormous attention paid to cobalt oxide materials as efficient water splitting electrocatalysts, a deep understanding of their activity discrepancy is still elusive. In this work, we showed that stabilization of the internally generated oxygen evolution reaction (OER) active phase (oxyhydroxide) is crucial for ZnCo2O4 electrocatalysts. A systematic evaluation of the bulk and nanostructured ZnCo2O4 system concomitant with nanostructured Co3O4 showed that leaching of Zn is the driving force behind the near-surface transformation to the oxyhydroxide phase. The relative contribution to this near-surface reconstruction was found to be surface-sensitive. The electrochemical observations combined with Raman and impedance spectroscopy revealed that the good catalytic activity could be attributed to the formation of the cobalt oxyhydroxide phase, which was created by the dissolution of Zn from the nanostructured surface. Moreover, this study sheds light on previous contradicting postulates regarding the discrepancy of the OER activity of ZnCo2O4. Our finding regarding the formation of the OER active phase in spinel Zn–Co oxide will motivate researchers to focus more on the near-surface reconstruction behavior of cobalt-based oxide electrocatalysts in the future.
- 23 March 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (13) , 15165-15175
Nanostructuring Matters: Stabilization of Electrocatalytic Oxygen Evolution Reaction Activity of ZnCo2O4 by Zinc Leaching
Despite the enormous attention paid to cobalt oxide materials as efficient water splitting electrocatalysts, a deep understanding of their activity discrepancy is still elusive. In this work, we showed that stabilization of the internally generated oxygen evolution reaction (OER) active phase (oxyhydroxide) is crucial for ZnCo2O4 electrocatalysts. A systematic evaluation of the bulk and nanostructured ZnCo2O4 system concomitant with nanostructured Co3O4 showed that leaching of Zn is the driving force behind the near-surface transformation to the oxyhydroxide phase. The relative contribution to this near-surface reconstruction was found to be surface-sensitive. The electrochemical observations combined with Raman and impedance spectroscopy revealed that the good catalytic activity could be attributed to the formation of the cobalt oxyhydroxide phase, which was created by the dissolution of Zn from the nanostructured surface. Moreover, this study sheds light on previous contradicting postulates regarding the discrepancy of the OER activity of ZnCo2O4. Our finding regarding the formation of the OER active phase in spinel Zn–Co oxide will motivate researchers to focus more on the near-surface reconstruction behavior of cobalt-based oxide electrocatalysts in the future.
- 6 August 2021
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 33 (19) , 7595-7612
Gold Nanoclusters as Electrocatalysts: Atomic Level Understanding from Fundamentals to Applications
- 6 August 2021
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 33 (19) , 7595-7612
Gold Nanoclusters as Electrocatalysts: Atomic Level Understanding from Fundamentals to Applications
- 12 July 2021
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 6 (8) , 2713-2725
Similar Looks, Different Photoelectrochemical Behavior: Unique Aspects of Metal-Nanocluster-Sensitized Electrodes
Metal nanoclusters (NCs) were initially used in light-harvesting applications as mere alternatives to traditional photosensitizers; therefore, NCs are often evaluated using a similar set of parameters as those developed for their traditional counterparts. Despite the resemblance in the design architectures and working principles of NC-based and traditional-sensitized photoelectrodes, recent studies have revealed that the photoelectrochemical (PEC) attributes of NC-sensitized photoelectrodes are distinctly different. Therefore, it is important to redefine the criteria used for assessing NCs in energy conversion devices. In this Focus Review, we present a comprehensive overview of some unique PEC behavior of NC-sensitized photoelectrodes. We also provide a mechanistic description of the photodegradation route and how it can be manipulated to compensate for photosensitization loss in NCs under practical operating conditions. Finally, we discuss future research directions to achieve a better understanding of the unique PEC behavior that will help to establish new design principles.
- 12 July 2021
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 6 (8) , 2713-2725
Similar Looks, Different Photoelectrochemical Behavior: Unique Aspects of Metal-Nanocluster-Sensitized Electrodes
Metal nanoclusters (NCs) were initially used in light-harvesting applications as mere alternatives to traditional photosensitizers; therefore, NCs are often evaluated using a similar set of parameters as those developed for their traditional counterparts. Despite the resemblance in the design architectures and working principles of NC-based and traditional-sensitized photoelectrodes, recent studies have revealed that the photoelectrochemical (PEC) attributes of NC-sensitized photoelectrodes are distinctly different. Therefore, it is important to redefine the criteria used for assessing NCs in energy conversion devices. In this Focus Review, we present a comprehensive overview of some unique PEC behavior of NC-sensitized photoelectrodes. We also provide a mechanistic description of the photodegradation route and how it can be manipulated to compensate for photosensitization loss in NCs under practical operating conditions. Finally, we discuss future research directions to achieve a better understanding of the unique PEC behavior that will help to establish new design principles.
- 28 May 2021
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 6 (6) , 2305-2312
Small Change, Big Difference: Photoelectrochemical Behavior of Au Nanocluster-Sensitized TiO2 Altered by Core Restructuring
- 28 May 2021
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 6 (6) , 2305-2312
Small Change, Big Difference: Photoelectrochemical Behavior of Au Nanocluster-Sensitized TiO2 Altered by Core Restructuring