JRJan Steinar Rønning

Jan Steinar Rønning

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jan Steinar Rønning has a total of 30 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A Case History of Graphite Exploration in North Norway Integrating Various Geophysical Surveys

    by Vikas Chand Baranwal, Jan Steinar Rønning, Bjørn Eskil Larsen, Yang Su, Bo Zhang, Yunhe Liu, Xiuyan Ren, Håvard Gautneb, Jomar Gellein

    Graphite is considered to be one of Europe’s most critical minerals. It is necessary for the transition from hydrocarbon fuel to electricity due to its use in batteries that power electronic devices and electric transport. In the past, high-quality exposed graphite was found in Norway without today’s advanced geophysical and geological methods. Norway is a key destination in Europe for graphite production. With an increasing demand for graphite, there have been efforts to systematically survey the country using modern geophysical and geological methods to find hidden graphite deposits. Among the various geophysical survey methods, electrical and electromagnetic (EM) methods are the first choice for the exploration of graphite due to the material’s high electrical conductivity. Airborne surveys are often used to cover a large area for a regional reconnaissance survey to locate the sites with potential mineral deposits before performing ground geophysical and geological surveys. Therefore, frequency-domain helicopter EM (HEM) and airborne magnetic surveys were performed in Northern Norway to locate interesting anomalies which were followed by ground surveys such as electrical resistivity tomography (ERT), charged-potential (CP), self-potential (SP), ground EM, and geological surveys. Some locations were also investigated with drilling and petrophysical core-sample analysis. In this paper, we present helicopter EM and magnetic data, 3D inversion of HEM data, and a successful ground follow-up survey result from the Vesterålen district in Northern Norway. The HEM survey identified previously known and new graphite occurrences, both partially exposed or buried, which were confirmed using ground surveys, drilling, and laboratory analysis of the samples.


  • Finetuning ground penetrating radar velocity analysis from hyperbola fitting using migration

    by Jan Steinar Rønning

    The widely used tool, ground penetrating radar (GPR), has proven to be an excellent research method for glaciological studies. The total ice thickness and englacial structures can be studied, and the method can give information on the temperature regime within the ice. Good velocity profiles are needed to convert measured two‐way travel time to depth information. In addition, a good velocity analysis can be used to improve data processing. A number of methods can be used to find the GPR wave velocity, which are briefly described. This study used hyperbola fitting to estimate the velocity in a glaciological study. In addition, Kirchhoff's migration was used to fine‐tune this velocity estimate. Within the Longyearbreen glacier, situated next to Longyearbyen on Spitsbergen, Svalbard archipelago, objects in the ice act as scattering points that create hyperbolas. Using the hyperbola‐fitting method, a GPR wave velocity equal to 0.170 ± 0.005 m/ns was estimated. By doing Kirchhoff's migration and studying the collapse of hyperbolas with variations of the migration velocity, a more accurate velocity estimate can be achieved; 0.172 ± 0.002 m/ns. A more accurate velocity estimate like this opens possibilities for better characterization of the ice body and ice thickness variations, as well as the variation of these as a function of time. In March 2022, the maximum ice thickness in the investigated area was calculated to be 88 ± 1 m.


  • 3D ground-penetrating radar attribute classification: A case study from a paleokarst breccia pipe in the Billefjorden area on Spitsbergen, Svalbard

    by Niklas Allroggen, Björn H. Heincke, Philipp Koyan, Walter Wheeler, Jan S. Rønning

    Ground-penetrating radar (GPR) is a method that can provide detailed information about the near subsurface in sedimentary and carbonate environments. The classical interpretation of GPR data (e.g., based on manual feature selection) often is labor-intensive and limited by the experience of the interpreter. Novel attribute-based classification approaches, typically used for seismic interpretation, can provide faster, more repeatable, and less biased interpretations. We have recorded a 3D GPD data set collected across a paleokarst breccia pipe in the Billefjorden area on Spitsbergen, Svalbard. After performing advanced processing, we compare the results of a classical GPR interpretation to the results of an attribute-based classification. Our attribute classification incorporates a selection of dip and textural attributes as the input for a k-means clustering approach. Similar to the results of the classical interpretation, the resulting classes differentiate between undisturbed strata and breccias or fault zones. The classes also reveal details inside the breccia pipe that are not discerned in the classical interpretation. Using nearby outcropping breccia pipes, we infer that the intrapipe GPR facies result from subtle differences, such as breccia lithology, clast size, or pore-space filling.


  • Open Access

    AEM in Norway: A Review of the Coverage, Applications and the State of Technology

    by Edward J. Harrison, Vikas C. Baranwal, Andreas A. Pfaffhuber, Craig W. Christensen, Guro H. Skurdal, Jan Steinar Rønning, Helgard Anschütz, Marco Brönner

    From the first use of airborne electromagnetic (AEM) systems for remote sensing in the 1950s, AEM data acquisition, processing and inversion technology have rapidly developed. Once used extensively for mineral exploration in its early days, the technology is increasingly being applied in other industries alongside ground-based investigation techniques. This paper reviews the application of onshore AEM in Norway over the past decades. Norway’s rugged terrain and complex post-glacial sedimentary geology have contributed to the later adoption of AEM for widespread mapping compared to neighbouring Nordic countries. We illustrate AEM’s utility by using two detailed case studies, including time-domain and frequency domain AEM. In both cases, we combine AEM with other geophysical, geological and geotechnical drillings to enhance interpretation, including machine learning methods. The end results included bedrock surfaces predicted with an accuracy of 25% of depth, identification of hazardous quick clay deposits, and sedimentary basin mapping. These case studies illustrate that although today’s AEM systems do not have the resolution required for late-phase, detailed engineering design, AEM is a valuable tool for early-phase site investigations. Intrusive, ground-based methods are slower and more expensive, but when they are used to complement the weaknesses of AEM data, site investigations can become more efficient. With new developments of drone-borne (UAV) systems and increasing investment in AEM surveys, we see the potential for continued global adoption of this technology.


  • Open Access

    The Graphite Occurrences of Northern Norway, a Review of Geology, Geophysics, and Resources

    by Håvard Gautneb, Jan Steinar Rønning, Ane K. Engvik, Iain H.C. Henderson, Bjørn Eskil Larsen, Janja Knežević Solberg, Frode Ofstad, Jomar Gellein, Harald Elvebakk, Børre Davidsen

    There are three provinces in Northern Norway in which occurrences of graphite are abundant; the Island of Senja, the Vesterålen archipelago, and the Holandsfjorden area. From these provinces, we report graphite resources from 28 occurrences. We use a combination of airborne and ground geophysics to estimate the dimensions of the mineralized areas, and, combined with sampling and analysis of the graphite contents, this gives us inferred resources for almost all the occurrences. The average TC (total carbon) content is 11.6%, and the average size is 9.3 Mt or 0.8 Mt of contained graphite. We demonstrate that the Norwegian graphite occurrences have grades and tonnages of the same order of magnitude as reported elsewhere. The graphite-bearing rocks occur in a sequence that encompasses carbonates, meta-arenites, acid to intermediate pyroxene gneisses, and banded iron formations metamorphosed into the granulite facies. Available radiometric dating shows that the graphite-bearing rocks are predated by Archean gneisses and postdated by Proterozoic intrusions of granitic to intermediate compositions.