AZAhmad Hafiz Zulkifly

Ahmad Hafiz Zulkifly

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ahmad Hafiz Zulkifly has a total of 70 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effects of low-intensity pulsed ultrasound on recovery of physical impairments, functional performance and quality of life after total knee arthroplasty

    by Munayati Munajat, Nor Azlin Mohd Nordin, Nor Hamdan Mohamad Yahya, Ahmad Hafiz Zulkifly

    Introduction: The presence of significant pain and swelling during the acute stage following total knee arthroplasty (TKA) may limit the patients’ ability to cooperate in intensive physiotherapy interventions. Low-intensity pulsed ultrasound is one of the modalities that can be used for acute pain and swelling management. However, only one study investigated the effect of this modality in patients with TKA. There is limited documentation of the effects of combining low-intensity pulsed ultrasound in TKA rehabilitation in the recovery of physical impairments and how these influence the recovery of function after TKA. Therefore, this study is proposed with the aim to evaluate the effects of low-intensity pulsed ultrasound as an adjunct to conventional physiotherapy on the recovery of physical impairments, functional performance and quality of life after TKA surgery. Methods: This is an assessor-blinded quasi-experimental study comparing two approaches of physiotherapy, namely pulsed ultrasound-added physiotherapy and conventional physiotherapy. Total number of participants with TKA required for this study will be calculated based on the result of a pilot study. Participants will be alternately allocated into either pulsed ultrasound-added physiotherapy group (low-intensity pulsed ultrasound and conventional physiotherapy) or control group (conventional physiotherapy). Pulsed ultrasound-added physiotherapy group will receive low-intensity pulsed ultrasound starting at post-operative day 2 (4–5 times for the first-week after surgery and 2–3 times a week for a further 2 weeks). Both groups will receive conventional physiotherapy 4 to 5 times for the first-week after surgery and 2 to 3 times a week for a further 11 weeks. This procedure and process will be tested and established in a pilot study. Primary outcomes of interest are pain level, swelling, active range of knee motion, and quadriceps strength. The secondary outcomes are functional performance and quality of life. Discussion: This study will fill the gaps in knowledge relating the benefits of including low-intensity pulsed ultrasound into conventional physiotherapy for patients with TKA. Trial registration: Australian New Zealand Clinical Trials Registry, ACTRN12618001226291


  • Matrix Production in Chondrocytes Transfected with Sex Determining Region Y-Box 9 and Telomerase Reverse Transcriptase Genes: An In Vitro Evaluation from Monolayer Culture to Three-Dimensional Culture

    by Noorhidayah Md Nazir, Ahmad Hafiz Zulkifly, Kamarul Ariffin Khalid, Ismail Zainol, Zaitunnatakhin Zamli, Munirah Sha’bAn

    Background: This study aimed to observe the cartilaginous matrix production in SRY (sex determining region Y)-box 9 (SOX9)- and/or telomerase reverse transcriptase (TERT)-transfected chondrocytes from monolayer to three-dimensional (3D) culture. Methods: The genes were transferred into chondrocytes at passage-1 (P1) via lipofection. The post-transfected chondrocytes (SOX9-, TERT- and SOX9/TERT) were analysed at P1, P2 and P3. The non-transfected group was used as control. The 3D culture was established using the chondrocytes seeded in a disc-shaped PLGA/fibrin and PLGA scaffolds. The resulting 3D “cells-scaffolds” constructs were analysed at week-1, -2 and -3. The histoarchitecture was evaluated using haematoxylin and eosin, alcian blue and safranin o stains. The quantitative sulphated glycosaminoglycan (sGAG) content was measured using biochemical assay. The cartilage-specific markers expression were analysed via real-time polymerase chain reaction. Results: All monolayer cultured chondrocytes showed flattened, fibroblast-like appearance throughout passages. Proteoglycan and sGAG were not detected at the pericellular matrix region of the chondrocytes. The sGAG content assay indicated the matrix production depletion in the culture. The cartilage-specific markers, COL2A1 and ACAN, were downregulated. However, the dedifferentiation marker, COL1A1 was upregulated. In 3D “cells-scaffolds” constructs, regardless of transfection groups, chondrocytes seeded in PLGA/fibrin showed a more uniform distribution and produced denser matrix than the PLGA group especially at week-3. Both sGAG and proteoglycan were clearly visualised in the constructs, supported by the increment of sGAG content, quantitatively. Both COL2A1 and ACAN were upregulated in SOX9/TERT-PLGA and SOX9/TERT-PLGA/fibrin respectively. While, COL1A1 was downregulated in SOX9/TERT-PLGA. Conclusion: These findings indicated that the SOX9/TERT-transfected chondrocytes incorporation into 3D scaffolds facilitates the cartilage regeneration which is viable structurally and functionally.


  • A review of powdered additive manufacturing techniques for Ti-6al-4v biomedical applications

    by W.S.W. Harun, N.S. Manam, M.S.I.N. Kamariah, S. Sharif, A.H. Zulkifly, I. Ahmad, H. Miura


  • Fabrication and characterization of three-dimensional poly(lactic acid-co-glycolic acid), atelocollagen, and fibrin bioscaffold composite for intervertebral disk tissue engineering application

    by Mohd Yusof Mohamad, Muhammad Azri Ifwat Mohamed Amin, Ahmad Fahmi Harun, Noorhidayah Md Nazir, Muhammad Aa’zAmuddin Ahmad Radzi, Rosyafirah Hashim, Nur Farhana Mat Nawi, Ismail Zainol, Ahmad Hafiz Zulkifly, Munirah Binti Sha’bAn

    The use of synthetically derived poly(lactic-co-glycolic acid) scaffold and naturally derived materials in regeneration of intervertebral disks has been reported in many previous studies. However, the potential effect of poly(lactic-co-glycolic acid) in combination with atelocollagen or fibrin or both atelocollagen and fibrin bioscaffold composite have not been mentioned so far. This study aims to fabricate and characterize three-dimensional poly(lactic-co-glycolic acid) scaffold incorporated with (1) atelocollagen, (2) fibrin, and (3) both atelocollagen and fibrin combination for intervertebral disk tissue engineering application. The poly(lactic-co-glycolic acid) without any natural, bioscaffold composites was used as control. The chemical conformation, morphology, cell–scaffold attachment, porosity, water uptake capacity, thermal properties, mechanical strength, and pH level were evaluated on all scaffolds using attenuated total reflectance Fourier transform infrared, scanning electron microscope, gravimetric analysis, swelling test, differential scanning calorimetry, and Instron E3000, respectively. Biocompatibility test was conducted to assess the intervertebral disk, annulus fibrosus cells viability using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. The attenuated total reflectance Fourier transform infrared results demonstrated notable peaks of amide bond suggesting interaction of atelocollagen, fibrin, and both atelocollagen and fibrin combination into the poly(lactic-co-glycolic acid) scaffold. Based on the scanning electron microscope observation, the pore size of the poly(lactic-co-glycolic acid) structure significantly reduced when it was incorporated with atelocollagen and fibrin. The poly(lactic-co-glycolic acid)–atelocollagen scaffolds demonstrated higher significant swelling ratios, mechanical strength, and thermal stability than the poly(lactic-co-glycolic acid) scaffold alone. All the three bioscaffold composite groups exhibited the ability to reduce the acidic poly(lactic-co-glycolic acid) by-product. In this study, the biocompatibility assessment using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide cells proliferation assay demonstrated a significantly higher annulus fibrosus cells viability in poly(lactic-co-glycolic acid)–atelocollagen–fibrin compared to poly(lactic-co-glycolic acid) alone. The cellular attachment is comparable in poly(lactic-co-glycolic acid)–atelocollagen–fibrin and poly(lactic-co-glycolic acid)–fibrin scaffolds. Overall, these results may suggest potential use of poly(lactic-co-glycolic acid) combined with atelocollagen and fibrin bioscaffold composite for intervertebral disk regeneration.


  • Open Access

    Histological Evaluation of Hydroxyapatite Granules with and without Platelet-Rich Plasma versus an Autologous Bone Graft: Comparative study of biomaterials used for spinal fusion in a New Zealand white rabbit model

    by Zamzuri Zakaria, Che Seman, Zunariah Buyong, Mohd Sharifudin, Ahmad Zulkifly, Kamarul Khalid

    Histological Evaluation of Hydroxyapatite Granules with and without Platelet-Rich Plasma versus an Autologous Bone Graft: Comparative study of biomaterials used for spinal fusion in a New Zealand white rabbit model


  • IDENTIFYING THE POTENTIAL OF TRANSCRIPTION FACTOR SOX9 GENE TRANSFER IN CHONDROCYTES DIFFERENTIATION AND ARTICULAR CARTILAGE FORMATION IN VITRO

    by Norhamiza Mohamad Sukri, Muhammad Aa’zamuddin Ahmad Radzi, Rozlin Abdul Rahman, Ahmad Hafiz Zulkifly, Abdurezak Abdulahi Hashi, Munirah Sha’ban

    Sox9 plays an important role as transcription factor for chondrogenesis; the formation of cartilage. This study aimed to identify the potential of the transiently overexpressed Sox9 gene in human chondrocytes differentiation and tissue engineered cartilage (TEC) formation in vitro. Articular cartilage samples were obtained from osteoarthritic patients who underwent joint replacement surgery. The isolated chondrocytes were cultured and transfected with pcDNA3-Sox9 using lipofection technique. The TEC constructs were formed by incorporating the transfected and the non-transfected cells onto poly(lactic-co-glycolic acid) (PLGA) scaffold with or without fibrin. This approach allows a comparison between four groups i.e. (1) transfected chondrocytes seeded on PLGA/fibrin [PFTC], (2) non-transfected chondrocytes on PLGA/fibrin [PFC], (3) transfected chondrocytes on PLGA [PTC] and (4) non-transfected chondrocytes on PLGA [PC]. All TEC constructs were cultured and evaluated at each time point of 1, 2 and 3 weeks in vitro. All TEC constructs were analysed for gross observation, histology, immunohistochemistry, cell proliferation activity, gene expression and sulphated glycosaminoglycan (sGAG) production assay. After 3 weeks, all PFTC and PFC showed higher cell viability, higher sGAG content, better histological features and distribution of extracellular matrix in concert with positive glycosaminoglycan (GAG) accumulation when compared to the PTC and PC. However, at week 3, the PFC and PC exhibited significantly higher sGAG production than PFTC and PTC. Chondrogenic properties of the constructs were evidenced by the expression of cartilage-specific markers; collagen II, collagen XI and aggrecan core protein. In this study, due to the nature of a new cartilage formation, the co-expression of collagen I in all constructs can be an indication of early cartilage development. Based on the outcomes, it is hoped that this study will provide a good ground for future tissue engineering application.


  • EVALUATION OF THREE DIMENSIONAL CONSTRUCT ENGINEERED FROM POLY(LACTIC-CO-GLYCOLIC ACID)/FIBRIN HYBRID SCAFFOLD USING RABBIT BONE MARROW MESENCHYMAL STEM CELLS FOR OSTEOCHONDRAL DEFECT REPAIR

    by Rozlin Abdul Rahman, Norhamiza Mohamad Sukri, Noorhidayah Md Nazir, Muhammad Aa’zamuddin Ahmad Radzi, Ahmad Hafiz Zulkifly, Aminudin Che Ahmad, Suzanah Abdul Rahman, Munirah Sha’ban

    Articular cartilage has poor repair capacity due to its avascular and aneural properties and has relatively few cells. This study investigated the ability of autologous implantation approach using three dimensional (3D) constructs engineered from bone marrow mesenchymal stem cells (BMSCs) seeded on poly(lactic-co-glycolic acid) (PLGA) with or without fibrin as cells carrier for the repair of osteochondral defect in rabbit model. The engineered 3D constructs – PLGA/Fibrin/BMSCs and PLGA/BMSCs – were cultured for 3 weeks in vitro and implanted autologously to the osteochondral defect created in the rabbit knee. The in vivo constructs were harvested and evaluated by means of gross observation, histology assessment, gene expression study, sulphated glycosaminoglycan (sGAG) production assay and biomechanical evaluation at 6 and 12 weeks post implantation. The results showed that the osteochondral defects treated with the PLGA/Fibrin/BMSCs constructs exhibited better repairment, more cartilaginous extracellular matrix, higher sGAG production, superior compressive strength and more intense expression of chondrogenic marker genes than the PLGA/BMSCs group. This study suggested that the PLGA/Fibrin/BMSCs has the potential to treat osteochondral defect and may be presented as a viable therapeutic option for those who would be in need from the life-extending benefits of tissue replacement or repair.


  • Predictors of major lower limb amputation in children presenting to a single tertiary centre with perceived or true food allergies

    by Nm Yusof, J Ab Rahman, Ah Zulkifly, A Che-Ahmad, Ka Khalid, Af Sulong, N Vijayasingham

    Formed in 1959, the Singapore Medical Association (SMA) is the national medical organisation representing the majority of medical practitioners in both the public and private sectors


  • The potential of 3-dimensional construct engineered from poly(lactic-co-glycolic acid)/fibrin hybrid scaffold seeded with bone marrow mesenchymal stem cells for in vitro cartilage tissue engineering

    by Rozlin Abdul Rahman, Norhamiza Mohamad Sukri, Noorhidayah Md Nazir, Muhammad Aa’zAmuddin Ahmad Radzi, Ahmad Hafiz Zulkifly, Aminudin Che Ahmad, Abdurezak Abdulahi Hashi, Suzanah Abdul Rahman, Munirah Sha’bAn


  • Open Access

    Morphological Study of the Newly Designed Cementless Femoral Stem

    by Mohd Yusof Baharuddin, Sh-Hussain Salleh, Ahmad Hafiz Zulkifly, Muhammad Hisyam Lee, Alias Mohd Noor

    A morphology study was essential to the development of the cementless femoral stem because accurate dimensions for both the periosteal and endosteal canal ensure primary fixation stability for the stem, bone interface, and prevent stress shielding at the calcar region. This paper focused on a three-dimensional femoral model for Asian patients that applied preoperative planning and femoral stem design. We measured various femoral parameters such as the femoral head offset, collodiaphyseal angle, bowing angle, anteversion, and medullary canal diameters from the osteotomy level to 150 mm below the osteotomy level to determine the position of the isthmus. Other indices and ratios for the endosteal canal, metaphyseal, and flares were computed and examined. The results showed that Asian femurs are smaller than Western femurs, except in the metaphyseal region. The canal flare index (CFI) was poorly correlated (r<0.50) to the metaphyseal canal flare index (MCFI), but correlated well (r=0.66) with the corticomedullary index (CMI). The diversity of the femoral size, particularly in the metaphyseal region, allows for proper femoral stem design for Asian patients, improves osseointegration, and prolongs the life of the implant.