Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Paulsamy Sambath has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • MHD radiative nanofluid flow past an upright cone under the influence of dissipative chemical reactions with heat source/sink and mass flux

    by E. Ragulkumar, P. Sambath, A. S. V. Ravi Kanth, S. Noeiaghdam

    The research aims to investigate the impacts of isothermal heat and species (mass) flux models on the phenomena of thermal as well as species (mass) transference aspects of nanofluid composed of water that is (Al2O3, Cu, Ag and TiO2 in Table 1) located over a upright cone in the process of viscidity dissipation, MHD, chemical process, thermic radiation as well as heat blowing/sink. Formulation of the fundamental governing equations for nanofluid flow is accomplished with the use of boundary layer approximations. The Crank–Nicolson approach gives insight into the non-dimensional forms of the relevant equations to be solved. Plots are used to explore specific fundamental characteristics such as velocity, temperature and concentrations of nanoparticles concerning various crucial factors such as the magnetic parameter, Prandtl number, Schmidt number, and volume fraction coefficients. In addition, to verify the efficacy and dependability of the method that has been suggested, the results of the problem that has been taken into consideration are contrasted with the results that have been obtained previously, and it is discovered that there is a positive agreement between the two sets of results. The study also reveals the results of the examination into the drag coefficient, the heat transfer rate as well as the mass transfer rate.


  • Entropy Generation and Heat Transfer Analysis of the Hydromagnetic Flow of Three Distinct Viscoelastic Fluids Over a Cone With Soret and Dufour Effects via Machine Learning

    by S. Varshegaa, P. Francis, P. Sambath, N. Ameer Ahammad, H. Thameem Basha

    Efficient heat and mass transfer is crucial in fields like energy systems and chemical processes, especially when dealing with non‐Newtonian fluids, such as Casson, Maxwell, and Williamson. However, the interactions of thermal radiation, Soret, and Dufour effects in magnetohydrodynamic free convection over a vertical cone have not been thoroughly studied, nor has the impact of entropy generation on thermodynamic efficiency. This study aims to explore these interactions, focusing on how they affect heat and mass transfer and entropy generation in three types of non‐Newtonian fluids. The governing equations are converted into dimensionless forms and solved using MATLAB's BVP4C solver, with results verified using an artificial neural network model. The main findings indicate that the Casson fluid has better heat transfer characteristics due to its lower viscosity at high shear rates. It was also found that magnetic fields can decrease velocity but increase the thermal and concentration boundary layers, which enhances diffusion rates. Additionally, thermal radiation, Soret, and Dufour effects significantly improve heat and mass diffusion, and the analysis of entropy generation highlights their importance for system efficiency. By combining numerical methods with machine learning, this study provides useful insights for improving heat and mass transfer in energy systems, chemical reactors, and manufacturing processes that use non‐Newtonian fluids.


  • Open Access

    Dual Diffusion effects on radiated Bio-convective Magnetohydrodynamics Powell-Eyring nanofluid flow along a vertical cone surface

    by P. Francis, P. Sambath, Ali J. Chamkha

    Non-Newtonian fluids play a crucial role in a wide range of applications involving the exchange of heat and mass. Nanoparticles are one of the key strategies for improving the performance of non-Newtonian fluids in terms of heat and mass transport. Nanoparticles, such as aluminum oxideand titanium dioxide, have exceptional thermal properties due to their high thermal conductivity. To thoroughly understand and optimize the behavior of non-Newtonian nanofluids over a cone surface, we employ numerical techniques. we also investigate the impacts of magnetohydrodynamics, thermal radiation (0.5 ≤ Rd ≤ 1.5), and dual diffusion (0.4 ≤ Nb ≤ 0.8 and 0.3 ≤ Nt ≤ 0.7). Additionally, we examine the impact of a fluid containing microorganisms on mass transmission and heat transfer. In order to convert the interconnected, non-linear governing partial differential equations into non-linear ODE's. Then transform this into a set of first-order ODEs. Subsequently, we utilize the Keller Box finite difference approach to obtain a solution for the non-linear ODE. The results of our study indicate that incorporating thermal radiation and MHD (magnetohydrodynamics) leads to increased rates of heat and mass transfer by enhancing the diffusion of microorganisms. We validate our observations by comparing them to prior research.


  • Open Access

    Analyzing the MHD Bioconvective Eyring–Powell Fluid Flow over an Upright Cone/Plate Surface in a Porous Medium with Activation Energy and Viscous Dissipation

    by Francis Peter, Paulsamy Sambath, Seshathiri Dhanasekaran

    In the field of heat and mass transfer applications, non-Newtonian fluids are potentially considered to play a very important role. This study examines the magnetohydrodynamic (MHD) bioconvective Eyring–Powell fluid flow on a permeable cone and plate, considering the viscous dissipation (0.3 ≤ Ec ≤0.7), the uniform heat source/sink (−0.1 ≤ Q0 ≤ 0.1), and the activation energy (−1 ≤ E1 ≤ 1). The primary focus of this study is to examine how MHD and porosity impact heat and mass transfer in a fluid with microorganisms. A similarity transformation (ST) changes the nonlinear partial differential equations (PDEs) into ordinary differential equations (ODEs). The Keller Box (KB) finite difference method solves these equations. Our findings demonstrate that adding MHD (0.5 ≤ M ≤ 0.9) and porosity (0.3 ≤ Γ ≤ 0.7) effects improves microbial diffusion, boosting the rates of mass and heat transfer. Our comparison of our findings to prior studies shows that they are reliable.


  • Open Access

    Numerical Investigation of Radiative Hybrid Nanofluid Flows over a Plumb Cone/Plate

    by Francis Peter, Paulsamy Sambath, Seshathiri Dhanasekaran

    Non-Newtonian fluids play a crucial role in applications involving heat transfer and mass transfer. The inclusion of nanoparticles in these fluids improves the efficiency of heat and mass transfer processes. This study employs a numerical solution approach to examine the flow of non-Newtonian hybrid nanofluids over a plumb cone/plate surface, considering the effects of magnetohydrodynamics (MHD) and thermal radiation. Additionally, we investigate how heat and mass transfer are affected by a fluid containing microorganisms. The governing nonlinear partial differential equations are transformed into nonlinear ordinary differential equations using a similarity transformation to simplify this complex system. We then use the Keller-box finite-difference method to solve these equations. Along with a table presenting the results for skin friction, Nusselt number, Sherwood number, and microbe density number, we present graphical representations of velocity, temperature, concentration, and microorganism diffusion behavior. Our results indicate that the addition of MHD and thermal radiation improves the diffusion of microorganisms, thereby enhancing the rates of heat and mass transfer. Through a comparative analysis with prior research, we demonstrate the reliability of our conclusions.


  • Open Access

    A Radiative Chemical Process for the Methylene Blue Degradation by Natural Convective Nanofluid Flow over an Upright Cone

    by E. Ragulkumar, J. Vinoth Kumar, N. Abirami, P. Sambath, K. K. Viswanathan

    An upstraight cone with nonisothermal surface velocity, temperature, and concentration was investigated using a numerical solution approach to simulate MHD, MB dye, and various nanofluid flows. Numerical evaluation of the flow field equation was carried out using an excellent finite difference method after it has been converted into a dimensionless form. Different heat transfer occurrences were observed depending on temperature, velocity, and concentration when using several types of nanofluids (TiO, Ag, Cu, and ). The amount of MB dye that was degraded by the synthesized nanofluids under the influence of sunlight irradiation was 81.40 percent as a catalyst (carbon nanodots). The parametric analysis of various features of flow fields has been shown using graphs. It was observed that heat is generated from the cone during the sun light irradiation reaction, heat is transferred to MB dye containing nanofluids, and heat interacts with nanofluids and is involved in the chemical reaction with the assistance of electrons. As MB dye degrades in the absence of catalysts (carbon nanodots), it is only 52 percent effective. MB dye is degraded at 81.40 percent, then becomes stable, and takes 120 minutes to degrade in nanofluids containing MB dye with catalysts (carbon nanodots).


  • Open Access

    Dissipative MHD free convective nanofluid flow past a vertical cone under radiative chemical reaction with mass flux

    by E. Ragulkumar, G. Palani, P. Sambath, Ali J. Chamkha

    Recently, Nanoparticles have supplied diverse challenges to several scientific issues. Nanoparticles dispersed in a variety of conventional fluids can change the flow and heat transmission properties of the fluids. The mathematical technique is used in this work to investigate the MHD water-based nanofluid flow via an upright cone. The heat and mass flux pattern is used in this mathematical model to examine MHD, viscous dissipation, radiation, chemical reactions and suction/injection processes. The finite difference approach was used to find the solution to the basic governing equations. A combination of nanofluids comprising nanoparticles including aluminum oxide (Al $$_{2}$$ 2 O $$_{3}$$ 3 ), silver (Ag), copper (Cu) and titanium dioxide (TiO $$_{2}$$ 2 ) with a volume fraction of nanoparticles (0, 0.01, 0.02, 0.03, 0.04), viscous dissipation ( $$\epsilon = 0.4, 0.8$$ ϵ = 0.4 , 0.8 ), MHD (M = 0.5, 1.0), radiation (Rd = 0.4, 1.0, 2.0), chemical reaction ( $$\lambda = 0.2, 2.0$$ λ = 0.2 , 2.0 ) and heat source/sink ( $$\Delta = -3, -2 ,0.5 , 1$$ Δ = - 3 , - 2 , 0.5 , 1 ) . The mathematical findings of velocity, temperature, concentration, skin friction, heat transfer rate as well as Sherwood number distributions are analyzed diagrammatically using non-dimensional flow parameters. It has been discovered that by increasing the value of the radiation parameter, velocity and temperature profiles enhance. The production of safe, high-quality products for consumers across the world depends on vertical cone mixers, from food to medicine, household cleansers to personal hygiene products. Every vertical cone mixer type we provide was especially developed to meet the demands of industry. As the mixer warms up on the slanted surface of the cone while vertical cone mixers are being utilized, the effectiveness of the grinding may be felt. The temperature is transferred along the cone’s slant surface as a consequence of the mixture being mixed quickly and repeatedly. This study describes the heat transmission in these events and their parametric properties. The heated cone’s temperature is then convective to its surroundings.