Tatiana I. Bugrova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tatiana I. Bugrova has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Mikhail Chornoborodov
Zaporizhzhia Polytechnic National University
3 shared publications - Sergii Morshchavka
Zaporizhzhia Polytechnic National University
3 shared publications D. M. Piza
The Institute of Information Science and Radio Electronics, Zaporizhzhye National Technical University, Zaporizhzhya, Ukraine
2 shared publications- Ludmila Logacheva
Zaporizhzhia Polytechnic National University
2 shared publications - Natalia Chornoborodova
Науково-виробнича фірма "Сведа", провідний інженер, 69011, Україна, м. Запоріжжя, вул. Жуковського, 65., Україна
2 shared publications Sergey E. Bankov
Radio Engineering Department, Moscow Power. Engineering Institute, Krasnokazarmennaya st. 14, Moscow 105835, RUSSIA, Fax:(095)3611620
2 shared publications
Latest Publications
- Open Access
- 30 April 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (5 (140)) , 14-24
Determining dispersion characteristics of rectangular waveguide with narrow impedance walls
This study explores a rectangular metal waveguide with narrow impedance walls, described by equivalent impedance-type boundary conditions. The task addressed is to build an effective mathematical model for analyzing waveguides with non-ideally conducting and irregular boundary surfaces, by determining their dispersion characteristics and wave propagation constants. An approach based on the Fourier method and Leontovych impedance boundary conditions has been proposed. This has made it possible to avoid the complications associated with the vector statement of the problem and obtain transcendental equations for determining the propagation constants of bulk and surface waves. The dispersion equation was analytically solved and the eigenwave parameters were calculated in a wide range of surface impedance values. The analytical results made it possible to verify correctness of the approach from a physical point of view; they could facilitate the optimization of parameters for the basic structure to the requirements of a specific microwave device. This is due to the use of an impedance boundary condition model, which adequately takes into account the influence of losses and reactive properties of the surface on electromagnetic fields and wave propagation processes in the waveguide. In practice, the proposed approach could be used for the analysis and design of complex periodic microwave structures, in particular, filters, directional couplers, as well as power distribution elements between phased array antenna elements. Through the generalization of research results in the form of normalization of the impedance and spectral characteristics of the basic waveguide structure, the obtained characteristics could be used to design microwave devices in the range from decimeter to millimeter wavelengths
- 30 April 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (5 (140)) , 14-24
Open AccessDetermining dispersion characteristics of rectangular waveguide with narrow impedance walls
This study explores a rectangular metal waveguide with narrow impedance walls, described by equivalent impedance-type boundary conditions. The task addressed is to build an effective mathematical model for analyzing waveguides with non-ideally conducting and irregular boundary surfaces, by determining their dispersion characteristics and wave propagation constants. An approach based on the Fourier method and Leontovych impedance boundary conditions has been proposed. This has made it possible to avoid the complications associated with the vector statement of the problem and obtain transcendental equations for determining the propagation constants of bulk and surface waves. The dispersion equation was analytically solved and the eigenwave parameters were calculated in a wide range of surface impedance values. The analytical results made it possible to verify correctness of the approach from a physical point of view; they could facilitate the optimization of parameters for the basic structure to the requirements of a specific microwave device. This is due to the use of an impedance boundary condition model, which adequately takes into account the influence of losses and reactive properties of the surface on electromagnetic fields and wave propagation processes in the waveguide. In practice, the proposed approach could be used for the analysis and design of complex periodic microwave structures, in particular, filters, directional couplers, as well as power distribution elements between phased array antenna elements. Through the generalization of research results in the form of normalization of the impedance and spectral characteristics of the basic waveguide structure, the obtained characteristics could be used to design microwave devices in the range from decimeter to millimeter wavelengths
- Open Access
- 30 April 2026
- Published by SHEI Pryazovskyi State Technical University in Наука та виробництво
- No. 31,p. 166-176
РОЗБІЖНІСТЬ ТЕОРІЇ Й ПРАКТИКИ СПІРАЛЬНИХ АНТЕН
Предметом статті були одновиткові та тривиткові об'ємні спіральні антени діапазону 3..6 ГГц для радіоелектронної боротьби з безпілотними літальними апаратами. Метою статті було порівняння результатів тривимірного моделювання в середовищі HFSS з результатами вимірювань характеристик спрямованості та узгодження фізичних прототипів, які були виготовлені відповідно до геометрії та матеріалів моделі. Для досягнення мети було розраховано геометрію антен, створено моделі одновиткових та тривиткових спіральних антен у середовищі проектування мікрохвильових пристроїв HFSS та оптимізовано розміри за критерієм максимальної ширини діаграми спрямованості. Було встановлено частотні залежності характеристик спрямованості та узгодження з лінією живлення в середовищі HFSS, а саме: розраховано величини імпедансу, коефіцієнти стоячої хвилі, коефіцієнти посилення та діаграми спрямованості одновиткових та тривиткових спіралей з металевими екранами. Для порівняння результатів розрахунків та експериментів були виготовлені прототипи антен відповідно до розрахункових розмірів та експериментально досліджені шляхом безпосереднього вимірювання їх діаграм спрямованості на частоті 5,25 ГГц та якості узгодження з лінією живлення у вигляді коаксіального кабелю з хвильовим опором 50 Ом. Якість узгодження спіральних антен оцінювалася за значенням коефіцієнтів стоячої хвилі в діапазоні від 3 до 6 ГГц. Порівняння літературних, розрахункових та виміряних характеристик показало досить великі розбіжності, які виявилися досить суттєвими, особливо щодо ширини діаграм спрямованості. Було встановлено, що ступінь розбіжності результатів залежить від кількості витків об'ємної спіралі та зменшується зі збільшенням кількості витків. Розбіжність між моделюванням та експериментом коливалася від 20 % до 50 % у характеристиках збігу та від 34% до 50% у ширині діаграм спрямованості (38° та 50° для одновиткової спіралі в експерименті та моделі відповідно, та 25° та 36° для тривиткової спіралі), причому конвергенція зростала зі збільшенням кількості витків спіралі.
- 30 April 2026
- Published by SHEI Pryazovskyi State Technical University in Наука та виробництво
- No. 31,p. 166-176
Open AccessРОЗБІЖНІСТЬ ТЕОРІЇ Й ПРАКТИКИ СПІРАЛЬНИХ АНТЕН
Предметом статті були одновиткові та тривиткові об'ємні спіральні антени діапазону 3..6 ГГц для радіоелектронної боротьби з безпілотними літальними апаратами. Метою статті було порівняння результатів тривимірного моделювання в середовищі HFSS з результатами вимірювань характеристик спрямованості та узгодження фізичних прототипів, які були виготовлені відповідно до геометрії та матеріалів моделі. Для досягнення мети було розраховано геометрію антен, створено моделі одновиткових та тривиткових спіральних антен у середовищі проектування мікрохвильових пристроїв HFSS та оптимізовано розміри за критерієм максимальної ширини діаграми спрямованості. Було встановлено частотні залежності характеристик спрямованості та узгодження з лінією живлення в середовищі HFSS, а саме: розраховано величини імпедансу, коефіцієнти стоячої хвилі, коефіцієнти посилення та діаграми спрямованості одновиткових та тривиткових спіралей з металевими екранами. Для порівняння результатів розрахунків та експериментів були виготовлені прототипи антен відповідно до розрахункових розмірів та експериментально досліджені шляхом безпосереднього вимірювання їх діаграм спрямованості на частоті 5,25 ГГц та якості узгодження з лінією живлення у вигляді коаксіального кабелю з хвильовим опором 50 Ом. Якість узгодження спіральних антен оцінювалася за значенням коефіцієнтів стоячої хвилі в діапазоні від 3 до 6 ГГц. Порівняння літературних, розрахункових та виміряних характеристик показало досить великі розбіжності, які виявилися досить суттєвими, особливо щодо ширини діаграм спрямованості. Було встановлено, що ступінь розбіжності результатів залежить від кількості витків об'ємної спіралі та зменшується зі збільшенням кількості витків. Розбіжність між моделюванням та експериментом коливалася від 20 % до 50 % у характеристиках збігу та від 34% до 50% у ширині діаграм спрямованості (38° та 50° для одновиткової спіралі в експерименті та моделі відповідно, та 25° та 36° для тривиткової спіралі), причому конвергенція зростала зі збільшенням кількості витків спіралі.
- 1 July 2018
- Published by Allerton Press in Radioelectronics and Communications Systems
- Vol. 61 (7) , 325-331
Method of Forming Classified Training Sample in Case of Spacial Signal Processing under Influence of Combined Interference
Under the conditions of the combined interference, the operation efficiency of the radar equipment is substantially deteriorated. This is due to the decorrelation of the signals of the point source...
- 1 July 2018
- Published by Allerton Press in Radioelectronics and Communications Systems
- Vol. 61 (7) , 325-331
Method of Forming Classified Training Sample in Case of Spacial Signal Processing under Influence of Combined Interference
Under the conditions of the combined interference, the operation efficiency of the radar equipment is substantially deteriorated. This is due to the decorrelation of the signals of the point source...
- 10 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Method of forming classified training sample with spatial signal processing under the impact of combined clutter and jamming
Problems. In the conditions of combined clutter and jamming radar performance significantly deteriorates. This is due to the decorrelation of a point source of an active jamming by spatially distributed nature of passive clutter. The methods of forming a classified training sample to adjust the weight coefficients of spatial filters are introduced. Goal. Developing an effective method of formation of a classified training sample generated by an active masking jamming, for spatial processing of radar signals in a situation of simultaneous influence of clutter. Methods. The scientific novelty of this work is in developing a new method of forming the training sample based on the assessment of the width of the normalized autocorrelation function in each range resolution element. On-the-fly analysis of the components of combined clutter and jamming in each resolution element improves the quality of the components classification and, as a result, minimizes the effect of passive clutter on a spatial filter adaptation process. Results. The theoretical and practical aspects of the formation of a classified training sample are analyzed. A functional flow block diagram of the classifier of combined clutter components is developed. Conclusions. On-the-fly analysis of the combined clutter and jamming components in each range resolution element improves the quality of the clutter classification, which is important in complex hydrometeorological conditions.
- 10 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Method of forming classified training sample with spatial signal processing under the impact of combined clutter and jamming
Problems. In the conditions of combined clutter and jamming radar performance significantly deteriorates. This is due to the decorrelation of a point source of an active jamming by spatially distributed nature of passive clutter. The methods of forming a classified training sample to adjust the weight coefficients of spatial filters are introduced. Goal. Developing an effective method of formation of a classified training sample generated by an active masking jamming, for spatial processing of radar signals in a situation of simultaneous influence of clutter. Methods. The scientific novelty of this work is in developing a new method of forming the training sample based on the assessment of the width of the normalized autocorrelation function in each range resolution element. On-the-fly analysis of the components of combined clutter and jamming in each resolution element improves the quality of the components classification and, as a result, minimizes the effect of passive clutter on a spatial filter adaptation process. Results. The theoretical and practical aspects of the formation of a classified training sample are analyzed. A functional flow block diagram of the classifier of combined clutter components is developed. Conclusions. On-the-fly analysis of the combined clutter and jamming components in each range resolution element improves the quality of the clutter classification, which is important in complex hydrometeorological conditions.
- 10 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Directional properties of 3D fractal hybrid antennas based on metamaterials
The basic requirements for dron antenna-ensuring the continuity of the radio channel in all the spatial evolution of the eguipment carrier and multifrequency, as different in functional purpose channels have different carrier frequencies. It must be compact, lightweight and durable. Previous researchers used multiple antennas concurrently. The goal was to create a new type of antennas for drones — hybrid 3D fractal antennas of a pyramid form with the use of metamaterials. Similar structures have not yet been explored by other authors. It was obtained the frequency properties for reflection coefficients, standing wave ratio, spatial magnitude distribution and radiation pattern.
- 10 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Directional properties of 3D fractal hybrid antennas based on metamaterials
The basic requirements for dron antenna-ensuring the continuity of the radio channel in all the spatial evolution of the eguipment carrier and multifrequency, as different in functional purpose channels have different carrier frequencies. It must be compact, lightweight and durable. Previous researchers used multiple antennas concurrently. The goal was to create a new type of antennas for drones — hybrid 3D fractal antennas of a pyramid form with the use of metamaterials. Similar structures have not yet been explored by other authors. It was obtained the frequency properties for reflection coefficients, standing wave ratio, spatial magnitude distribution and radiation pattern.
- 27 August 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 432-434
Dispersive and diffraction analysis of integrated periodic waveguide structure
- 27 August 2003
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 432-434
Dispersive and diffraction analysis of integrated periodic waveguide structure
- 13 November 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 642-644 vol.2
Integrated quasioptical millimeter wave multibeam antenna
In the present article a modified beam-forming network (BFN) for quasioptical multibeam antennas is considered. We propose adding an array of coupled lines with fixed phase shifters to an array of insulated lines. The feed radiation pattern strives for a rectangular form due to these additional elements. As will be demonstrated, such a radiation pattern shape provides maximum optical system aperture efficiency without power spillage over its borders. At the same time the array period is rather small, to provide for the crossing of neighboring radiation patterns on the half-power level. One format for realizing BFN of multibeam antennas is based on a dielectric slotted waveguide (DSW) array. DSW has a low attenuation constant in comparison with the other transmission lines in millimeter waves.
- 13 November 2002
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 642-644 vol.2
Integrated quasioptical millimeter wave multibeam antenna
In the present article a modified beam-forming network (BFN) for quasioptical multibeam antennas is considered. We propose adding an array of coupled lines with fixed phase shifters to an array of insulated lines. The feed radiation pattern strives for a rectangular form due to these additional elements. As will be demonstrated, such a radiation pattern shape provides maximum optical system aperture efficiency without power spillage over its borders. At the same time the array period is rather small, to provide for the crossing of neighboring radiation patterns on the half-power level. One format for realizing BFN of multibeam antennas is based on a dielectric slotted waveguide (DSW) array. DSW has a low attenuation constant in comparison with the other transmission lines in millimeter waves.
- 1 September 1994
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 1442-1447
Planar Lenses for Millimeter Waves
A quasioptical planar lenses based on periodical strip gratings printed on the both sides of a dielectric slab are proposed for millimeter-wave applications. They may be realized using thin-film technology. The lenses based on strip gratings with thin strips (w<<λ) were experimentally and theoretically investigated in two situations: period d is much smaller then wavelength λ (closely spaced strip gratings) and d is about λ/ 2 (array of coupled slot lines (SL)). Eigen waves of the dielectric slab with gratings on its surfaces and diffraction of the dielectric slab surface waves by the lens boundaries were theoretically studied. Electromagnetic field distribution near the focal spot of the lens was experimentally studied. A compact quasioptical multibeam integrated lens antenna was designed, fabricated and tested. By introducing an array of coupled lines with fixed phase shifter to an array of insulated lines good antenna efficiency has been achieved.
- 1 September 1994
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 2, 1442-1447
Planar Lenses for Millimeter Waves
A quasioptical planar lenses based on periodical strip gratings printed on the both sides of a dielectric slab are proposed for millimeter-wave applications. They may be realized using thin-film technology. The lenses based on strip gratings with thin strips (w<<λ) were experimentally and theoretically investigated in two situations: period d is much smaller then wavelength λ (closely spaced strip gratings) and d is about λ/ 2 (array of coupled slot lines (SL)). Eigen waves of the dielectric slab with gratings on its surfaces and diffraction of the dielectric slab surface waves by the lens boundaries were theoretically studied. Electromagnetic field distribution near the focal spot of the lens was experimentally studied. A compact quasioptical multibeam integrated lens antenna was designed, fabricated and tested. By introducing an array of coupled lines with fixed phase shifter to an array of insulated lines good antenna efficiency has been achieved.
- 1 October 1993
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 6 (13) , 782-786
Analysis of a millimeter‐wave integrated beam‐forming network for quasioptical multibeam antennas
An integrated beam‐forming network analysis for multibeam antennas based on an array of dielectric slotted waveguides in millimeter waves is proposed. The advantages of such networks include low losses, high aperture efficiencies, and design flexibility in comparison with traditional quasitopical systems. A new technique for obtaining the main characteristics by solving eigenwave and diffraction problems of the basic structure of the proposed network has been developed. © 1993 John Wiley & Sons, Inc.
- 1 October 1993
- Published by Wiley in Microwave and Optical Technology Letters
- Vol. 6 (13) , 782-786
Analysis of a millimeter‐wave integrated beam‐forming network for quasioptical multibeam antennas
An integrated beam‐forming network analysis for multibeam antennas based on an array of dielectric slotted waveguides in millimeter waves is proposed. The advantages of such networks include low losses, high aperture efficiencies, and design flexibility in comparison with traditional quasitopical systems. A new technique for obtaining the main characteristics by solving eigenwave and diffraction problems of the basic structure of the proposed network has been developed. © 1993 John Wiley & Sons, Inc.