Eduardo Diz-Mellado

Urban areas in Mediterranean climates are increasingly affected by extreme heat, exacerbated by the Urban Heat Island (UHI) effect and the lack of climate-responsive public spaces. This study addresses the need for integrated methodologies combining empirical monitoring and simulation tools to support regenerative urban design. The objective is to evaluate the effectiveness of Nature-Based Solutions (NBSs) in improving microclimatic conditions and outdoor thermal comfort during summer heatwave periods in a vulnerable urban area in Seville (Spain). A mixed-method approach combining microclimatic monitoring and ENVI-met simulations in situ was applied. A field campaign conducted in summer 2023 was used to characterize baseline conditions and calibrate the model, which simulated both current and proposed scenarios incorporating vegetation, shading systems, permeable materials, and water features. Results from the Seville case study show significant improvements, with air temperature reductions of up to 1.6 °C (daytime) and 1.9 °C (nighttime), surface temperature decreases of up to 11 °C, and thermal comfort improvements reaching 8 °C in UTCI. Beyond environmental benefits, the intervention promotes socially regenerative public space by enhancing usability, inclusivity, and comfort. Limitations include the use of a single representative summer day and inherent simplifications of the ENVI-met model. These findings demonstrate the potential of integrated NBS strategies to mitigate urban heat and support climate-adaptive and socially responsive urban design.

Recent development of methodologies based on digital twins through 3D scanning and 3D printing has increased over the past decade, offering new possibilities in manufacturing, production and scaling of models’ applications. However, there are few examples of the application of model digitization technologies for the restoration of ceramic-built heritage by means of 3D modelling. That is why this research focuses on the application of these advanced methodologies to the recovery of architectural ceramic ornamental objects in heritage buildings. Deteriorated ceramic pieces are selected and scanned during field campaigns using 3D scanning technology in early 20th century heritage sites in Seville (Spain). The aim is to create accurate replicas of these damaged objects by 3D printing with clay using non-invasive techniques. The study stands out for its practical approach and its implications for the conservation of built cultural heritage. The results proved effective for replacing lost or damaged elements in a heritage context. Once the investment in the necessary equipment and technologies has been made, the use of clay as a material for 3D printing not only proves feasible but also offers advantages in terms of cost and time savings for repairs compared to traditional restoration techniques. In the present investigation the production time of similar pieces using 3D printing took 6.3–10.9 h while traditional methods take over a week. The application of these technologies represents an advancement in integrating modern methods into cultural heritage conservation, opening new possibilities for the preservation of history and art worldwide.

Outdoor comfort is gaining attention in the design of our cities to face the current context of rising temperatures. Although simulation is required to inform the early design stage of projects considering outdoor space and strategies to improve their thermal performance, different tool options must be compared through monitoring to determine the accuracy of their modeling. This study analyses the thermal comfort benefits of the installation of a shading device in a courtyard in the Mediterranean climate. In the study, two simulation workflows were analyzed, one using ENVI-met software and the other using the Ladybug Tools, to evaluate their performance. Air temperature monitoring data were used to validate and calibrate the simulations. Then, both were used to compute the Universal Thermal Climate Index (UTCI) to evaluate comfort. The results show that the simulation reproduced an air temperature reduction when the shading was installed, but this was not as high as the monitoring results (up to 13.7 °C). In the UTCI, in contrast, the two simulation workflows provided contradictory results. These differences were explained by analyzing the different parameters affecting comfort and the mean radiant temperature, and the air temperature was found to be the parameter most affecting the UTCI in this context. Thus, future research should focus on improving the accuracy of the simulations of these two parameters.

Comparative evaluation of passive conditioning strategies for the improvement of courtyard thermal performance