SSSvetlana Sineva

Svetlana Sineva

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Svetlana Sineva has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Quantitative Determination of Iron Redox State in Copper–Iron–Silicate Slags by Electron Probe Microanalysis

    by Roman Starykh, Svetlana Sineva, Denis Shishin, Evgueni Jak

    Iron‐bearing silicate systems are fundamental components of oxide melts, glasses, and ceramic materials, where multivalent iron strongly influences structure, thermodynamic properties, and redox behavior. Accurate determination of iron oxidation state remains a central challenge in studies of high‐temperature silicate systems because ferric to ferrous ratio control oxygen activity, defect chemistry, and phase equilibria. In this study, a quantitative approach for estimating the Fe 3+ /(Fe 3+ + Fe 2+ ) ratio is presented based on direct measurement of oxygen concentration in oxide system by electron probe microanalysis (EPMA). Two sets of samples in the Cu─Si─Fe─O system were synthesized using equilibration and quenching techniques, producing phase assemblages involving slag/copper/tridymite or slag/copper/magnetite (or wüstite) phases. Equilibration experiments were conducted at 1250°C and 1300°C, over oxygen partial pressures ranging from 10 −9 to 10 −6.5 atm, followed by rapid quenching of the samples to preserve high‐temperature equilibrium states. Elemental phase compositions, including metal cations and oxygen, were analyzed by EPMA. The measured oxygen concentrations were used to calculate valence states of metal cations (Cu + , Si 4+ , Fe 2+ , and Fe 3+ , respectively), enabling direct determination of the ferric to ferrous ratio in the samples. The experimental results have been compared with calculated and literature data, demonstrating that accurate oxygen quantification by EPMA provides a reliable approach for oxidation state determination in complex oxide systems. Beyond metallurgical slags, the proposed methodology is applicable to silicate melts, glasses, and ceramic materials, where multivalent cations control structure, defect chemistry, and thermodynamic behavior, offering a robust experimental tool for studies redox‐dependent properties in high‐temperature oxide materials.

  • Open Access

    Experimental study of the phase equilibria in the Cu–Ni–S system

    by Iuliia Shakirova, Denis Shishin, Svetlana Sineva, Maksym Shevchenko, Evgueni Jak

  • The experimental phase equilibria studies of the Ni–Sn–S system

    by Modassir Akhtar, Maksym Shevchenko, Georgii Khartcyzov, Svetlana Sineva, Roman Starykh, Evgueni Jak

    It exhibits a miscibility gap, enabling the simultaneous recycling of Ni- and Sn-containing liquids in industrial pyrometallurgical reactors. Formation of two matte phases (Ni- and Sn-rich) allows separate refinement of each metal.


  • The experimental phase equilibria studies of the Fe–Sb–As system

    by Modassir Akhtar, Maksym Shevchenko, Svetlana Sineva, Evgueni Jak

    No miscibility gap was found. Fe 1+ x (Sb, As) spreads from Fe 1+ x Sb to Fe 3 As 2 with a saddle point and forms an isomorphous system inside the ternary system. No new ternary phase was found. Fe–As and Fe–Sb binary phases dissolved Sb and As, respectively.


  • Open Access

    Quantitative Measurement of Oxygen by Electron Probe X-ray Microanalysis for Estimation of Multivalent Metals Oxidation State in Oxide Solutions and Slags

    by Roman Starykh, Svetlana Sineva, Denis Shishin, Evgueni Jak

    The oxidation state of multivalent metals in oxide solid solutions and slags indicates the oxidation-reduction conditions in geological, metallurgical, and other processes. These conditions are often expressed as effective oxygen partial pressure, essential for understanding metal distribution among phases and optimizing target metal recovery in metallurgy. The ratio of different metal oxidation states in oxide solid solutions and slags significantly affects their physical and chemical properties. Historically, researchers have relied on specialized “atomic” methods, such as Mossbauer spectroscopy, Auger spectroscopy, "wet chemical methods" and gravimetry, to determine the oxidation state of metals in oxide solutions. However, most of these methods are qualitative, applicable to only a few specific metals, and limited in analyzing multiphase materials. Electron Probe Microanalysis (EPMA) has emerged as a key method in phase equilibria research in oxide materials. EPMA offers a good balance between precision, accuracy, cost, and speed of analysis, along with excellent spatial resolution for samples with complex microstructures. Historically, high absorption of characteristic X-rays limited accurate oxygen quantification, resulting in reliance on metal cation measurements and assumptions about their oxidation states, which could be misleading. However, recent instrument advancements enable accurate EPMA measurement of light elements, including oxygen. The goal of the study is to refine the EPMA technique for accurate oxygen measurement and to demonstrate its applicability for determining the oxidation states of the metals in complex oxide solutions. To validate this approach, experimental samples in the Fe-O, Fe-Si-O and Cu-Si-O systems were synthesized under controlled oxygen partial pressures at 1150-1300 °C.

  • Open Access

    Thermodynamic Modeling and Research for Processing Complex Concentrate Blends in Custom Copper Smelters for Maximum Revenue

    by Denis Shishin, Nagendra Tripathi, Svetlana Sineva, Evgueni Jak

    Custom copper smelters, which are dependent on purchased concentrates, are facing increasing economic pressures amid falling treatment and refining fees. With the declining availability of high-grade, low-impurity concentrates, copper demand is expected to surge to support the transition to renewable energy. This study, which is based on recent observations of Chinese custom smelters, examines their strategies to address the challenge of purchasing concentrates at record-low treatment and refining charges. By investing in slag flotation technology, smelters can enhance copper, gold, and silver recovery. By blending high-grade and low-grade concentrates, they can capitalize on the gap between the recoverable and payable metals, which are often referred to as “free metals”, while also benefiting from byproducts, mainly sulfuric acid. While this approach offers economic opportunities, it introduces operational complexities. To mitigate these, laboratory testing, combined with advanced digital predictive tools based on thermodynamics, is crucial. This study demonstrates the use of thermodynamic models supported by experimental work for analyzing furnace operations. FactSage® software and a custom database are employed to define the operating window of two common flowsheets: (1) flash smelting + flash converting and (2) bottom-blown smelting + bottom-blowing converting.


  • Open Access

    Thermodynamic Modelling and Research for Processing of Complex Concentrate Blends in Custom Copper Smelters at Maximum Revenue

    by Denis Shishin, Nagendra Tripathi, Svetlana Sineva, Evgueni Jak

    Custom copper smelters, dependent on purchased concentrates, face increasing economic pressures amid falling treatment and refining fees. With declining availability of high-grade, low-impurity concentrates, copper demand is expected to surge to support the transition to renewable energy. This study, based on recent observations of Chinese custom smelters, examines their strategies to address the challenge of purchasing concentrates at record-low treatment and refining charges. By investing in slag flotation technology, smelters can enhance copper, gold and silver recoveries. Through blending of high-grade and low-grade concentrates they can capitalize on the gap between the recoverable and payable metals, which is often referred to as “free metals”, while also benefiting from by-products, mainly sulfuric acid. While this approach offers economic opportunities, it introduces operational complexities. To mitigate these, laboratory testing combined with advanced digital predictive tools based on thermodynamics is crucial. This study demonstrates the use of thermodynamic models supported by experimental work for analyzing furnace operations. FactSage® software and a custom database are employed to define the operating window of two common flowsheets: 1) Flash Smelting + Flash Converting and 2) Bottom-Blown Smelting + Bottom Blowing Converting.


  • Experimental Study and Thermodynamic Analysis of High-Temperature Processing of Mixed Ni-Cu Sulfide Feed

    by Svetlana Sineva, Denis Shishin, Viktoria Prostakova, Ata Fallah-Mehrjardi, Evgueni Jak


  • Open Access

    Experimental Study and Thermodynamic Modelling of Equilibrium Distributions of Ni, Sn and Zn Between Slag and Black Copper for E-Scrap Recycling Applications

    by Svetlana Sineva, Denis Shishin, Viktoria Prostakova, Mari Lindgren, Roman Starykh, Jiang Chen, Evgueni Jak

    The recycling of waste electronic and electrical equipment (WEEE) and other secondary copper-containing materials through the "black copper" process relies on the selective distribution of metals among the gas, slag, and copper-rich liquid phase. This distribution is controlled by the effective oxidation/reduction potential, often expressed in terms of oxygen partial pressure. Separation of Ni and Sn presents a certain challenge in recycling though black copper route due to similar distribution coefficients over a wide range of oxygen partial pressures and possibly can be improved by optimizing the slag chemistry. This study provides experimental information on the distribution of Ni, Sn, and Zn between fayalite slags or calcium ferrite slags and copper-rich metal at 1250°C. The study uses high-temperature equilibration, quenching, and electron probe X-ray microanalysis (EPMA) techniques along with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) for selected measurements of low concentrations. The oxygen partial pressure is controlled by the CO/CO2/Ar gas flow or by measuring the concentration of copper oxide in the slag. The effect of slag composition in terms of Fe/SiO2 or Fe/CaO ratio is studied by using different holding materials, such as silica (SiO2) ampoule, solid spinel (Fe3O4), wüstite (FeO), or dicalcium ferrite (Ca2Fe2O5). The experimental results are compared with literature data and used to optimize thermodynamic models for FactSage® software. The results demonstrate an opportunity for more effective separation of Ni and Sn using at oxidizing stage by using calcium ferrite slag promoting the formation of Sn4+.


  • Open Access

    Experimental Study of the Combined Effects of Al2O3, CaO and MgO on Gas/Slag/Matte/Spinel Equilibria in the Cu–Fe–O–S–Si–Al–Ca–Mg System at 1473 K (1200ºC) and p(SO2) = 0.25 atm

    by Svetlana Sineva, Denis Shishin, Maksym Shevchenko, Peter C. Hayes, Evgueni Jak

    The combined effects of Al2O3, CaO and MgO slagging components on phase equilibria and thermodynamics in the basic Cu–Fe–O–S–Si system have been evaluated at 1473 K (1200 ºC) and p(SO2) = 0.25 atm for a range of oxygen partial pressures and matte compositions. The experimental technique included high-temperature equilibration of the samples on a spinel substrate under controlled gas atmosphere (CO/CO2/SO2/Ar), followed by rapid quenching and subsequent measurement of the equilibrium phase compositions using Electron Probe X-ray Microanalysis (EPMA). The experimental data have been compared with the results of thermodynamic calculations undertaken using FactSage software and an internal thermodynamic database. Both the experimental results and the calculations results revealed that the presence of Al2O3, CaO and MgO reduced both the sulphur and copper concentrations in the slag phase for a given set of process conditions. The data have been used for further optimisation of the parameters of the thermodynamic database describing multicomponent metallurgical systems. The resulting thermodynamic database is capable of predicting, with high accuracy, the phase equilibria and the distribution of all elements between the phases in the Cu–Fe–O–S–Si–(Al, Ca, Mg) system. Graphical Abstract