Farida Abesi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Farida Abesi has a total of 74 co-authors. Here are the top co-authors by number of shared publications:
- Maryam Ehsani
Dental Materials Research Center, Department of Endodontics, Faculty of Dentistry, Babol University of Medical Sciences, Babol-Iran
4 shared publications - Sina Haghanifar
Oral Health Research Center, Health Research Institute, Babol University of Medical Sciences, Babol, Iran
4 shared publications - Soraya Khafri
Cellular and Molecular Biology Research Center, Health Research Institute, Babol University of Medical Sciences, Babol, Iran
4 shared publications - Ehsan Moudi
Babol Univ Med Sci, Hlth Res Inst, Oral Hlth Res Ctr, Babol, Iran
3 shared publications - Hossein Bisheh
School of Engineering and Built Environment, Anglia Ruskin University
3 shared publications Ahmad Tamaddoni
Babol Univ Med Sci, Hlth Res Inst, Noncommunicable Pediat Dis Res Ctr, Babol, Iran
2 shared publications
Latest Publications
- Open Access
- 1 October 2024
- Published by Apex Publishing in Journal of Gorgan University of Medical Sciences
- Vol. 26 (3) , 45-52
Evaluation of the Position and Dimensions of the Infraorbital Canal Based on Cone-Beam Computed Tomography
Background and Objective: The infraorbital canal (IOC) is located in the floor of the orbit and terminates at the infraorbital foramen below the orbital rim. The IOC is a crucial anatomical landmark for successful anesthesia in dentistry and oral and maxillofacial surgery. This study aimed to evaluate the position and dimensions ...
- 1 October 2024
- Published by Apex Publishing in Journal of Gorgan University of Medical Sciences
- Vol. 26 (3) , 45-52
Open AccessEvaluation of the Position and Dimensions of the Infraorbital Canal Based on Cone-Beam Computed Tomography
Background and Objective: The infraorbital canal (IOC) is located in the floor of the orbit and terminates at the infraorbital foramen below the orbital rim. The IOC is a crucial anatomical landmark for successful anesthesia in dentistry and oral and maxillofacial surgery. This study aimed to evaluate the position and dimensions ...
- Open Access
- 29 September 2024
- Published by Maad Rayan Publishing Company in Journal of Shahrekord University of Medical Sciences
- Vol. 26 (3) , 101-107
Jaw bone changes in panoramic radiography in patients with hyperparathyroidism
Background and aims: The current investigation aimed to evaluate jaw bone changes, and compare the presence of gonial cortex bone thickness, mental index (MI), lamina dura (LD), lower dental canal, and bone density in panoramic radiography, in patients with hyperparathyroidism. Methods: The present cross-sectional descriptive-analytical study was performed on 17 healthy individuals and 17 patients who suffered from resorptive hypercalciuria in the dialysis center of Shahid Beheshti hospital in Babol in 2018. If patients had two or more decayed teeth, they were referred to a specialized maxillofacial clinic by the dentist for free panoramic imaging. Mandibular cortical index, LD, bone change, mandibular resorption (MR), and general cortical indices underwent examination. Results: The mean age of the control and case groups was 36.58±11.81 years and 40.23±14.32 years, respectively (P=0.424). In addition, the mean MI was 4.27±0.87 and 2.98±0.75 in the control and case groups, respectively (P<0.001). Based on the results, the mean gonion region’s cortical bone thickness was 0.93±0.23 and 1.09±0.24 in the case and control groups, respectively (P<0.001). Further, bone changes (P=0.036) and MR (P=0.017) were significantly different in the case and control groups. However, LD vision showed no significant difference in the hyperparathyroidism and the control groups (P=0.141). Conclusion: The results demonstrated a decrease in the thickness of the cortical bone in the guinea pig, mental region, and lack of dental canal in resorptive hypercalciuria compared to healthy individuals.
- 29 September 2024
- Published by Maad Rayan Publishing Company in Journal of Shahrekord University of Medical Sciences
- Vol. 26 (3) , 101-107
Open AccessJaw bone changes in panoramic radiography in patients with hyperparathyroidism
Background and aims: The current investigation aimed to evaluate jaw bone changes, and compare the presence of gonial cortex bone thickness, mental index (MI), lamina dura (LD), lower dental canal, and bone density in panoramic radiography, in patients with hyperparathyroidism. Methods: The present cross-sectional descriptive-analytical study was performed on 17 healthy individuals and 17 patients who suffered from resorptive hypercalciuria in the dialysis center of Shahid Beheshti hospital in Babol in 2018. If patients had two or more decayed teeth, they were referred to a specialized maxillofacial clinic by the dentist for free panoramic imaging. Mandibular cortical index, LD, bone change, mandibular resorption (MR), and general cortical indices underwent examination. Results: The mean age of the control and case groups was 36.58±11.81 years and 40.23±14.32 years, respectively (P=0.424). In addition, the mean MI was 4.27±0.87 and 2.98±0.75 in the control and case groups, respectively (P<0.001). Based on the results, the mean gonion region’s cortical bone thickness was 0.93±0.23 and 1.09±0.24 in the case and control groups, respectively (P<0.001). Further, bone changes (P=0.036) and MR (P=0.017) were significantly different in the case and control groups. However, LD vision showed no significant difference in the hyperparathyroidism and the control groups (P=0.141). Conclusion: The results demonstrated a decrease in the thickness of the cortical bone in the guinea pig, mental region, and lack of dental canal in resorptive hypercalciuria compared to healthy individuals.
- Open Access
- 7 June 2024
- Published by Termedia Sp. z.o.o. in Polish Journal of Radiology
- Vol. 89, 281-291
Performance of different cone-beam computed tomography scan modes with and without metal artifact reduction in detection of recurrent dental caries under various restorative materials
Purpose: We aimed to compare the diagnostic performance of different cone-beam computed tomography (CBCT) scan modes with and without the application of a metal artifact reduction (MAR) option under 5 different restorative materials.Material and methods: Our research was an in vitro study with 150 caries-free premolars and molars. The teeth were randomly divided into experimental (with artificially induced caries, n = 75) and control (without caries, n = 75) groups and were prepared based on 5 types of restorative materials, including conventional composites (Filtek Z250, Gradia), flow composite, glass ionomer, and amalgam. The teeth were examined under 2 CBCT scan modes (high-resolution [HIRes] and standard) with and without MAR application. Finally, the diagnostic accuracy index values (area under the receiver operating characteristic curve [AUC], sensitivity, and specificity) were calculated.Results: The AUC of standard scan mode with the MAR option was significantly lower than that of HIRes with MAR (p = 0.018) and without MAR option (p = 0.011) in detecting recurrent caries. Also, without MAR option, the diagnostic accuracy (AUC) of the standard mode was significantly lower than that of the HIRes (p = 0.020). Similar findings were observed for sensitivity and specificity. Moreover, diagnostic performance of standard and HIRes scan modes with and without MAR in the amalgam group was lower than that in other restorative material groups.Conclusions: Diagnostic performance of HIRes CBCT mode was higher than that of standard mode for recurrent caries and remained unaffected by MAR application. However, the accuracy in detecting recurrent caries was lower in the amalgam group compared with other restorative material groups.
- 7 June 2024
- Published by Termedia Sp. z.o.o. in Polish Journal of Radiology
- Vol. 89, 281-291
Open AccessPerformance of different cone-beam computed tomography scan modes with and without metal artifact reduction in detection of recurrent dental caries under various restorative materials
Purpose: We aimed to compare the diagnostic performance of different cone-beam computed tomography (CBCT) scan modes with and without the application of a metal artifact reduction (MAR) option under 5 different restorative materials.Material and methods: Our research was an in vitro study with 150 caries-free premolars and molars. The teeth were randomly divided into experimental (with artificially induced caries, n = 75) and control (without caries, n = 75) groups and were prepared based on 5 types of restorative materials, including conventional composites (Filtek Z250, Gradia), flow composite, glass ionomer, and amalgam. The teeth were examined under 2 CBCT scan modes (high-resolution [HIRes] and standard) with and without MAR application. Finally, the diagnostic accuracy index values (area under the receiver operating characteristic curve [AUC], sensitivity, and specificity) were calculated.Results: The AUC of standard scan mode with the MAR option was significantly lower than that of HIRes with MAR (p = 0.018) and without MAR option (p = 0.011) in detecting recurrent caries. Also, without MAR option, the diagnostic accuracy (AUC) of the standard mode was significantly lower than that of the HIRes (p = 0.020). Similar findings were observed for sensitivity and specificity. Moreover, diagnostic performance of standard and HIRes scan modes with and without MAR in the amalgam group was lower than that in other restorative material groups.Conclusions: Diagnostic performance of HIRes CBCT mode was higher than that of standard mode for recurrent caries and remained unaffected by MAR application. However, the accuracy in detecting recurrent caries was lower in the amalgam group compared with other restorative material groups.
- Open Access
- 28 May 2024
- Published by Maad Rayan Publishing Company in Journal of Advanced Periodontology & Implant Dentistry
- Vol. 16 (1) , 1-3
Effect of auto-adaptive metal artifact reduction (aMAR) program in cone-beam computed tomography on assessing pre-implant bone levels
This research aimed to introduce an auto-adaptive metal artifact reduction (aMAR) algorithm in cone-beam computed tomography (CBCT) to assess the levels of the pre-implant alveolar crest. Dental implants as a treatment modality for edentulous patients consist of a titanium alloy, which creates a metal artifact, resulting in a dark dental structure in the CBCT scans. Metallic artifacts are limiting factors for the precise detection in CBCT images. These are related to the dark areas around materials and metallic structures (e.g., restorations, implants, and endodontic instruments). To overcome this problem, the metal artifact reduction (MAR) program has been recommended as a post-procedure stage for CBCT image reconstruction. Recent developments offer CBCT scanners with an aMAR option with a greater dynamic range to help overcome the challenges of peri-implant bone evaluation to reach accurate dental diagnoses.
- 28 May 2024
- Published by Maad Rayan Publishing Company in Journal of Advanced Periodontology & Implant Dentistry
- Vol. 16 (1) , 1-3
Open AccessEffect of auto-adaptive metal artifact reduction (aMAR) program in cone-beam computed tomography on assessing pre-implant bone levels
This research aimed to introduce an auto-adaptive metal artifact reduction (aMAR) algorithm in cone-beam computed tomography (CBCT) to assess the levels of the pre-implant alveolar crest. Dental implants as a treatment modality for edentulous patients consist of a titanium alloy, which creates a metal artifact, resulting in a dark dental structure in the CBCT scans. Metallic artifacts are limiting factors for the precise detection in CBCT images. These are related to the dark areas around materials and metallic structures (e.g., restorations, implants, and endodontic instruments). To overcome this problem, the metal artifact reduction (MAR) program has been recommended as a post-procedure stage for CBCT image reconstruction. Recent developments offer CBCT scanners with an aMAR option with a greater dynamic range to help overcome the challenges of peri-implant bone evaluation to reach accurate dental diagnoses.
- 27 March 2024
- Published by Maad Rayan Publishing Company in Journal of Oral Health and Oral Epidemiology
- Vol. 13 (1) , 6-12
Assessment of the relationship between oral health and adenoid hypertrophy in children aged 8 to 15 years
Background: The oral health of children is adversely affected by mouth breathing. One of the main reasons for mouth breathing in children is adenoid hypertrophy. Consequently, this study aimed to assess the relationship between oral health and adenoid hypertrophy among children aged 8–15 years in the city of Babol. Methods: This case-control study was conducted on 100 children. The case group included 50 children with adenoid hypertrophy. An Ear, Nose, and Throat (ENT) specialist examined the children clinically and referred them to the oral and maxillofacial radiology clinic. The study control group included 50 healthy children. To assess the size of the adenoidal tissues and the dimensions of the upper airways, we assessed the linear cephalometric measurement Ptm-ad2 . The evaluations consisted of the decayed, missing, and filled teeth (DMFT and dmft for permanent and primary teeth, respectively) index, mean periodontal pocket depth, plaque index (PI), and papillary marginal attached (PMA) index. Results: Fifty samples had adenoid hypertrophy. The prevalence of dental caries was significantly higher in children with adenoid hypertrophy compared to healthy children (DMFT was 4.10±2.09 and 2.06±0.97, and dmft was 3.52±3.34 and 1.48±1.24, in the case and control groups, respectively). Furthermore, the periodontal indices of the case group were significantly greater than those of the control group (periodontal pocket depth was 2.93±0.35 and 1.98±0.23, PI was 2.73±0.26 and 1.13±0.29, and the PMA index was 5.71±0.82 and 2.55±0.48, in the case and control groups, respectively). Conclusion: In the case group, there was a statistically higher prevalence of dental caries and gingival inflammation than in the control group. Therefore, periodical dental visits and preventive dental procedures are recommended for children with adenoid hypertrophy.
- 27 March 2024
- Published by Maad Rayan Publishing Company in Journal of Oral Health and Oral Epidemiology
- Vol. 13 (1) , 6-12
Assessment of the relationship between oral health and adenoid hypertrophy in children aged 8 to 15 years
Background: The oral health of children is adversely affected by mouth breathing. One of the main reasons for mouth breathing in children is adenoid hypertrophy. Consequently, this study aimed to assess the relationship between oral health and adenoid hypertrophy among children aged 8–15 years in the city of Babol. Methods: This case-control study was conducted on 100 children. The case group included 50 children with adenoid hypertrophy. An Ear, Nose, and Throat (ENT) specialist examined the children clinically and referred them to the oral and maxillofacial radiology clinic. The study control group included 50 healthy children. To assess the size of the adenoidal tissues and the dimensions of the upper airways, we assessed the linear cephalometric measurement Ptm-ad2 . The evaluations consisted of the decayed, missing, and filled teeth (DMFT and dmft for permanent and primary teeth, respectively) index, mean periodontal pocket depth, plaque index (PI), and papillary marginal attached (PMA) index. Results: Fifty samples had adenoid hypertrophy. The prevalence of dental caries was significantly higher in children with adenoid hypertrophy compared to healthy children (DMFT was 4.10±2.09 and 2.06±0.97, and dmft was 3.52±3.34 and 1.48±1.24, in the case and control groups, respectively). Furthermore, the periodontal indices of the case group were significantly greater than those of the control group (periodontal pocket depth was 2.93±0.35 and 1.98±0.23, PI was 2.73±0.26 and 1.13±0.29, and the PMA index was 5.71±0.82 and 2.55±0.48, in the case and control groups, respectively). Conclusion: In the case group, there was a statistically higher prevalence of dental caries and gingival inflammation than in the control group. Therefore, periodical dental visits and preventive dental procedures are recommended for children with adenoid hypertrophy.
- Open Access
- 1 March 2024
- Published by Walter de Gruyter GmbH in Acta Medica Bulgarica
- Vol. 51 (1) , 67-72
Prevalence of Incidental Findings in Oral and Maxillofacial Cone-Beam Computed Tomography: A Systematic Review and Meta-Analysis
Background: As the use of cone-beam computed tomography (CBCT) is increasing and the quality of images is enhanced, the likelihood of incidental findings detection in CBCT radiographs is raised. Variable frequency of incidental findings on oral and maxillofacial CBCT scans has been reported. Aims: To perform a systematic review and meta-analysis to resolve the conflicting results about the overall prevalence of incidental findings in oral and maxillofacial CBCT scans. Methods: We searched the literature in PubMed, Embase, and Scopus databases from inception to 31 October 2022 to identify studies that reported the frequency of incidental findings in the subjects undergoing CBCT imaging. We pooled the extracted data and reported the estimates as a percent with a 95% confidence interval (CI). Results: A total of 21 eligible studies were included, comprising 9,788 patients (54.2% women) and 10,625 CBCT scans. Analysis showed that the incidental findings were present in 69.1% (95% CI: 55.6-80.0) of the CBCT scans. There were 1.48 incidental findings per CBCT scan. Pooled prevalence of incidental findings in men was 50.2% (95% CI: 23.1-77.3), which was higher than in women (41.8% [95% CI: 16.5-72.2]). Conclusion: A considerable prevalence of incidental findings was observed in oral and maxillofacial CBCT scans.
- 1 March 2024
- Published by Walter de Gruyter GmbH in Acta Medica Bulgarica
- Vol. 51 (1) , 67-72
Open AccessPrevalence of Incidental Findings in Oral and Maxillofacial Cone-Beam Computed Tomography: A Systematic Review and Meta-Analysis
Background: As the use of cone-beam computed tomography (CBCT) is increasing and the quality of images is enhanced, the likelihood of incidental findings detection in CBCT radiographs is raised. Variable frequency of incidental findings on oral and maxillofacial CBCT scans has been reported. Aims: To perform a systematic review and meta-analysis to resolve the conflicting results about the overall prevalence of incidental findings in oral and maxillofacial CBCT scans. Methods: We searched the literature in PubMed, Embase, and Scopus databases from inception to 31 October 2022 to identify studies that reported the frequency of incidental findings in the subjects undergoing CBCT imaging. We pooled the extracted data and reported the estimates as a percent with a 95% confidence interval (CI). Results: A total of 21 eligible studies were included, comprising 9,788 patients (54.2% women) and 10,625 CBCT scans. Analysis showed that the incidental findings were present in 69.1% (95% CI: 55.6-80.0) of the CBCT scans. There were 1.48 incidental findings per CBCT scan. Pooled prevalence of incidental findings in men was 50.2% (95% CI: 23.1-77.3), which was higher than in women (41.8% [95% CI: 16.5-72.2]). Conclusion: A considerable prevalence of incidental findings was observed in oral and maxillofacial CBCT scans.
- Open Access
- 1 January 2024
- Published by Medicina Oral, S.L. in Journal of Clinical and Experimental Dentistry
- Vol. 16 (2) , e145-e150
Association between gubernacular canals characteristics and teeth eruption status: a cone-beam computed tomography study
There have been few studies that have evaluated the imaging characteristics of the gubernacular canal. Additionally, it is important to understand the role of this structure and its relationship with tooth erupt. Therefore, the objective of this study was to investigate the association between gubernacular canal features and teeth eruption status on cone-beam computed tomography (CBCT) images. In this cross-sectional study, 150 CBCT images were obtained from patients referred to a maxillofacial radiology clinic in Babol, northern Iran, in 2021. Eruption status (normal, delayed, and impacted) and the presence of the gubernacular canal were recorded. If the gubernacular canal was detected, its opening site in the alveolar crest (buccal, lingual, and central) and its attachment site to the dental follicle (usual, unusual) were further assessed. Gubernacular canal was observed in 133 (88.7%) of the total 150 CBCT images. Also, 41 cases (27.3%) had impacted teeth. The detection rate of the gubernacular canal in the normal, delayed, and impacted eruption of teeth was 92.1% (n=93), 75.0% (n=6), and 82.9% (n=34), respectively (p=0.135). Opening the gubernacular canal in the alveolar crest was not associated with teeth eruption status. Also, unusual attachment sites of the gubernacular canal to dental follicles were mostly seen in abnormal eruptions. According to the findings, observing the presence of the gubernacular canal on CBCT may not help anticipate teeth eruption problems. Key words:Gubernacular canal, Cone-beam computed tomography, Tooth eruption.
- 1 January 2024
- Published by Medicina Oral, S.L. in Journal of Clinical and Experimental Dentistry
- Vol. 16 (2) , e145-e150
Open AccessAssociation between gubernacular canals characteristics and teeth eruption status: a cone-beam computed tomography study
There have been few studies that have evaluated the imaging characteristics of the gubernacular canal. Additionally, it is important to understand the role of this structure and its relationship with tooth erupt. Therefore, the objective of this study was to investigate the association between gubernacular canal features and teeth eruption status on cone-beam computed tomography (CBCT) images. In this cross-sectional study, 150 CBCT images were obtained from patients referred to a maxillofacial radiology clinic in Babol, northern Iran, in 2021. Eruption status (normal, delayed, and impacted) and the presence of the gubernacular canal were recorded. If the gubernacular canal was detected, its opening site in the alveolar crest (buccal, lingual, and central) and its attachment site to the dental follicle (usual, unusual) were further assessed. Gubernacular canal was observed in 133 (88.7%) of the total 150 CBCT images. Also, 41 cases (27.3%) had impacted teeth. The detection rate of the gubernacular canal in the normal, delayed, and impacted eruption of teeth was 92.1% (n=93), 75.0% (n=6), and 82.9% (n=34), respectively (p=0.135). Opening the gubernacular canal in the alveolar crest was not associated with teeth eruption status. Also, unusual attachment sites of the gubernacular canal to dental follicles were mostly seen in abnormal eruptions. According to the findings, observing the presence of the gubernacular canal on CBCT may not help anticipate teeth eruption problems. Key words:Gubernacular canal, Cone-beam computed tomography, Tooth eruption.
- Open Access
- 27 December 2023
- Published by Termedia Sp. z.o.o. in Polish Journal of Radiology
- Vol. 88 (1) , 597-605
Diagnostic performance of cone-beam computed tomography for apical periodontitis: a systematic review and meta-analysis
Introduction: We aimed to conduct a systematic review and meta-analysis of studies examining the performance of cone-beam computed tomography (CBCT) imaging in apical periodontitis (AP) prediction. This was done to address the contradictory results reported in the existing literature on this topic.Material and methods: We searched the Embase, PubMed, Cochrane library, and Scopus databases for literature published from inception to 30 June 2023 without language restriction using appropriate keywords. We included studies that reported the diagnostic accuracy values of CBCT in AP detection among humans by comparing AP diagnosis with a control group without lesions. We pooled the diagnostic accuracy values using a random effects model and presented the estimates as percentage and 95% confidence interval (CI). The heterogeneity between the surveys was explored by I2 statistic.Results: Out of 301 citations initially identified, a total of 8 eligible studies were finally included. According to the analyses, the overall pooled sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) estimated for CBCT were 94.6% (95% CI: 90.2-97.1; I2 = 55.9%, p = 0.026), 91.2% (95% CI: 81.7-96.0; I2 = 81.6%, p < 0.001), 93.0% (95% CI: 87.4-96.2; I2 = 56.5%, p = 0.024), and 92.3% (95% CI: 82.3-96.8; I2 = 86.4%, p < 0.001), respectively. The overall pooled sensitivity, specificity, PPV, and NPV of digital radiography were 61.0% (95% CI: 38.3-79.8; I2 = 94.4%, p < 0.001), 97.3% (95% CI: 85.6-99.5; I2 = 86.7%, p < 0.001), 98.3% (95% CI: 92.0-99.6; I2 = 74.4%, p = 0.002), and 41.6% (95% CI: 28.0-56.6; I2 = 89.5%, p < 0.001), respectively.Conclusions: CBCT imaging has excellent diagnostic accuracy in AP prediction. Also, CBCT has better discriminant test performance for AP than digital radiography.
- 27 December 2023
- Published by Termedia Sp. z.o.o. in Polish Journal of Radiology
- Vol. 88 (1) , 597-605
Open AccessDiagnostic performance of cone-beam computed tomography for apical periodontitis: a systematic review and meta-analysis
Introduction: We aimed to conduct a systematic review and meta-analysis of studies examining the performance of cone-beam computed tomography (CBCT) imaging in apical periodontitis (AP) prediction. This was done to address the contradictory results reported in the existing literature on this topic.Material and methods: We searched the Embase, PubMed, Cochrane library, and Scopus databases for literature published from inception to 30 June 2023 without language restriction using appropriate keywords. We included studies that reported the diagnostic accuracy values of CBCT in AP detection among humans by comparing AP diagnosis with a control group without lesions. We pooled the diagnostic accuracy values using a random effects model and presented the estimates as percentage and 95% confidence interval (CI). The heterogeneity between the surveys was explored by I2 statistic.Results: Out of 301 citations initially identified, a total of 8 eligible studies were finally included. According to the analyses, the overall pooled sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) estimated for CBCT were 94.6% (95% CI: 90.2-97.1; I2 = 55.9%, p = 0.026), 91.2% (95% CI: 81.7-96.0; I2 = 81.6%, p < 0.001), 93.0% (95% CI: 87.4-96.2; I2 = 56.5%, p = 0.024), and 92.3% (95% CI: 82.3-96.8; I2 = 86.4%, p < 0.001), respectively. The overall pooled sensitivity, specificity, PPV, and NPV of digital radiography were 61.0% (95% CI: 38.3-79.8; I2 = 94.4%, p < 0.001), 97.3% (95% CI: 85.6-99.5; I2 = 86.7%, p < 0.001), 98.3% (95% CI: 92.0-99.6; I2 = 74.4%, p = 0.002), and 41.6% (95% CI: 28.0-56.6; I2 = 89.5%, p < 0.001), respectively.Conclusions: CBCT imaging has excellent diagnostic accuracy in AP prediction. Also, CBCT has better discriminant test performance for AP than digital radiography.
- Open Access
- 1 December 2023
- Published by Walter de Gruyter GmbH in Acta Medica Bulgarica
- Vol. 50 (4) , 41-46
Comparison of Ultrasonography and Cone-Beam Computed Tomography Accuracy in Measuring the Soft Tissue Thickness of Maxillary and Mandibular Gingiva in a Sheep Model
Background: To date, few studies have compared the accuracy of cone-beam computed tomography (CBCT) and ultrasonography in measuring the soft tissue thickness of the maxillary and mandibular gingiva. Aims: To compare the accuracy of ultrasonography and CBCT in measuring the soft tissue thickness of the maxillary and mandibular gingiva in a sheep model. Materials and Methods: In this study, 38 different landmarks (26 points from the upper jaw and 12 points from the lower jaw) were evaluated. The gingival soft tissue thickness was measured using a digital caliper, ultrasonography, and standard and high-resolution CBCTs. The measurements were finally compared with each other. Results: Regarding the thicknesses < 2 mm, no significant difference was seen between the measurements of the digital caliper and ultrasonography (mean difference < 0.1 mm, p = 0.140). Conversely, data analysis indicated significant differences between CBCTs measurements and digital caliper and ultrasonography measurements. Regarding thicknesses > 2 mm, digital caliper measurement was not significantly different from ultrasonography and high-resolution CBCT measurements (mean differences < 0.1 mm) but differed from the standard CBCT measurement. Also, a significant difference was observed between ultrasonography and standard CBCT measurements but not between ultrasonography and high-resolution CBCT (mean differences < 0.1 mm). Finally, mean differences between standard and high-resolution CBCT measurements were statistically significant. Conclusion: According to the results, ultrasonography can be a reliable option for measuring gingival soft tissues regardless of their thickness, while CBCT may be more suitable for thicker gingival tissues. Clinicians should carefully consider the measurement accuracy of different imaging methods when planning dental procedures.
- 1 December 2023
- Published by Walter de Gruyter GmbH in Acta Medica Bulgarica
- Vol. 50 (4) , 41-46
Open AccessComparison of Ultrasonography and Cone-Beam Computed Tomography Accuracy in Measuring the Soft Tissue Thickness of Maxillary and Mandibular Gingiva in a Sheep Model
Background: To date, few studies have compared the accuracy of cone-beam computed tomography (CBCT) and ultrasonography in measuring the soft tissue thickness of the maxillary and mandibular gingiva. Aims: To compare the accuracy of ultrasonography and CBCT in measuring the soft tissue thickness of the maxillary and mandibular gingiva in a sheep model. Materials and Methods: In this study, 38 different landmarks (26 points from the upper jaw and 12 points from the lower jaw) were evaluated. The gingival soft tissue thickness was measured using a digital caliper, ultrasonography, and standard and high-resolution CBCTs. The measurements were finally compared with each other. Results: Regarding the thicknesses < 2 mm, no significant difference was seen between the measurements of the digital caliper and ultrasonography (mean difference < 0.1 mm, p = 0.140). Conversely, data analysis indicated significant differences between CBCTs measurements and digital caliper and ultrasonography measurements. Regarding thicknesses > 2 mm, digital caliper measurement was not significantly different from ultrasonography and high-resolution CBCT measurements (mean differences < 0.1 mm) but differed from the standard CBCT measurement. Also, a significant difference was observed between ultrasonography and standard CBCT measurements but not between ultrasonography and high-resolution CBCT (mean differences < 0.1 mm). Finally, mean differences between standard and high-resolution CBCT measurements were statistically significant. Conclusion: According to the results, ultrasonography can be a reliable option for measuring gingival soft tissues regardless of their thickness, while CBCT may be more suitable for thicker gingival tissues. Clinicians should carefully consider the measurement accuracy of different imaging methods when planning dental procedures.
- 19 June 2023
- Published by Springer Nature in Oral Radiology
- Vol. 39 (4) , 722-730
Comparison of accuracy cone-beam computed tomography and digital bitewing radiography for detection of recurrent caries under various restorative materials: in vitro study
Objective The aim of this study was to compare and evaluate diagnostic accuracy of two different CBCT scan modes and digital bitewing radiography for detection of recurrent caries under five different restorative materials, and determine the relationship between the types of restorative materials. Materials and methods In this in vitro study, 200 caries-free upper and lower premolars and molars were selected. A standard deep Class II cavities was created in the middle of the mesial surface of all teeth. In 100 teeth of the experimental and control groups, secondary caries was artificially demineralized. All teeth were filled with five types of restorative material including two types of conventional composite resins, flow composite resin, glass ionomer and amalgam. The teeth were imaged with high resolution (HIRes) and standard CBCT scan modes and digital bitewing. The AUC, sensitivity, specificity and areas under the ROC curve were calculated and verified through SPSS. Results CBCT technique was the best option in diagnosing recurrent caries. The diagnostic accuracy and specificity of HIRes CBCT scan mode was significantly higher than standard mode (P = 0.031) and bitewing (P = 0.029) for detection of recurrent caries, especially under composite group. There were no significant differences in accuracy value of bitewing and standard CBCT scan mode. Conclusion CBCT showed higher accuracy and specificity on the detection of recurrent caries which was more accurate than bitewing radiography. The HIRes CBCT scan mode achieved the highest accuracy and performed the best in recurrent caries detection.
- 19 June 2023
- Published by Springer Nature in Oral Radiology
- Vol. 39 (4) , 722-730
Comparison of accuracy cone-beam computed tomography and digital bitewing radiography for detection of recurrent caries under various restorative materials: in vitro study
Objective The aim of this study was to compare and evaluate diagnostic accuracy of two different CBCT scan modes and digital bitewing radiography for detection of recurrent caries under five different restorative materials, and determine the relationship between the types of restorative materials. Materials and methods In this in vitro study, 200 caries-free upper and lower premolars and molars were selected. A standard deep Class II cavities was created in the middle of the mesial surface of all teeth. In 100 teeth of the experimental and control groups, secondary caries was artificially demineralized. All teeth were filled with five types of restorative material including two types of conventional composite resins, flow composite resin, glass ionomer and amalgam. The teeth were imaged with high resolution (HIRes) and standard CBCT scan modes and digital bitewing. The AUC, sensitivity, specificity and areas under the ROC curve were calculated and verified through SPSS. Results CBCT technique was the best option in diagnosing recurrent caries. The diagnostic accuracy and specificity of HIRes CBCT scan mode was significantly higher than standard mode (P = 0.031) and bitewing (P = 0.029) for detection of recurrent caries, especially under composite group. There were no significant differences in accuracy value of bitewing and standard CBCT scan mode. Conclusion CBCT showed higher accuracy and specificity on the detection of recurrent caries which was more accurate than bitewing radiography. The HIRes CBCT scan mode achieved the highest accuracy and performed the best in recurrent caries detection.