VKVishal Kaushik

Vishal Kaushik

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Vishal Kaushik has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Carrier-Induced Optical Modulation in Si-ITO Based Ring Resonator With Improved Tuning Efficiency

    by Nikita Mohanta, Ashutosh Kumar, Santosh Kumar, Prem Babu, Vishal Kaushik, Shankar Kumar Selvaraja, Mukesh Kumar

    Reconfigurable, high-speed, and energy-efficient modulators are central to the advancement of next-generation optical communication and signal processing systems. Here, we demonstrate a micro-ring modulator based on semiconductor heterojunctions of silicon and indium tin oxide (ITO). The device exploits field-effect induced refractive index tuning in accumulation layer of ITO which has strong plasma dispersion and epsilon near zero (ENZ) effect enabling efficient electro-optic modulation with ultra-compact device footprint. A voltage-tunable spectral range with a wavelength shift of 1 nm, corresponding to EO tuning efficiency of 0.5 nm/V is reported. The 20 μm long device achieves a high extinction ratio of 21 dB and electrical bandwidth of 26.5 GHz which enables the high-speed operation of more than 50 Gbps while maintaining low energy consumption of 0.112 pJ/bit, positioning the device among the most efficient integrated modulators based on ITO. The reported results establish the Si-ITO ring modulator as a compact, CMOS-compatible platform for wavelength-selective modulation and tunable filters with potential for applications in microwave photonic signal processing, and neuromorphic photonic computing applications.


  • Efficient Photodetection via High Aspect Ratio Core-Shell Nanowire Array

    by Vishal Kaushik, Swati Rajput, Ashavani Kumar, Mukesh Kumar

    Here we propose a Cu2O-ZnO-based high-aspect ratio core-shell nanowire (with radial p-n junction) for efficient photodetection via a cost-effective fabrication route. The proposed platform exploits enhanced active depletion area offered by radial p-n junction in high aspect ratio nanowires, along with this excellent transport properties of the device. This results in superior light-matter interaction and better charge collection efficiency. The proposed device demonstrates significant improvement in responsivity via a simple fabrication approach and offers a compact and cost-effective alternative to complex, highly sensitive photodetectors. It can find applications in remote sensing, medical diagnostics barcode readers, and wireless environmental monitoring. Moreover, the enhanced light-matter interaction via the proposed approach can be useful in various other applications such as Solar Cells, Light Emitting Diodes, and Optical Modulation.


  • Electronically Controlled Semiconductor Nanoparticle Array for Tunable Plasmonic Metasurfaces

    by Vishal Kaushik, Swati Rajput, Prem Babu, Suresh Kumar Pandey, Rahul Dev Mishra, Haoran Ren, Stefan A Maier, Volker J. Sorger, Hamed Dalir, Mukesh Kumar

    Plasmonic Metasurfaces (PMs) offer unprecedented ways to manipulate optical wavefronts with an ultra-thin layer of materials. Until recently, the research efforts have focused on designing passive metasurfaces. However, gaining high-speed, reversible control over individual pixels (basic building block) in these engineered structures can offer better and faster ways to control and shape light. Conventionally used tuning approaches target the whole substrate by either utilizing mechanically moving frames or tuning the refractive index of the whole substrate. Conceptualizing a high-speed, switching mechanism for locally tuning pixel/meta-atom will allow new applications that were previously unimaginable. Here we introduce a novel approach for tunable plasmonic meta-atoms via modulation doping in semiconductor nanostructures at the telecommunication window which can potentially be used for local control in PMs. The proposed approach is based on (voltage-controlled) tuning the quantum confinement of the charge carrier from 1-D to 0-D in semiconductor nanorods. The applied field allows accumulation of excess charge carrier density and facilitates tuning plasmonic resonance of nanoresonators from 1800–1550 nm. A high-speed voltage-controlled localized surface plasmon resonance is reported in semiconductor nanostructures fabricated via a cost-effective, scalable, self-assembly process based on aluminum anodization. Moreover, the concept in-principle will be compatible with most semiconductors allowing exciting applications in tunable metasurfaces, spasers, modulators, and many more.


  • Electronically Controlled Quantum Confinement for Tunable Plasmonic Metasurfaces

    by Vishal Kaushik, Swati Rajput, Prem Babu, Suresh Kumar Pandey, Rahul Dev Mishra, Haoran Ren, Stefan Maier, Volker J. Sorger, Hamed Dalir, Mukesh Kumar

    Here we demonstrate a novel approach for high-speed voltage-controlled Localized Surface Plasmon Resonance (LSPR) in semiconductor-nanostructures at the telecommunication window. The novel platform can have exciting applications in tunable metasurfaces, spasers, modulators, and many more

  • Comb-Like Hybrid Plasmonic Ring Resonator for Large and Voltage Tunable Group Delay

    by Rahul Dev Mishra, Lalit Singh, Swati Rajput, Vishal Kaushik, Suresh Kumar Pandey, Prem Babu, Mukesh Kumar

    A nanophotonic ring resonator based on hybrid plasmonic waveguide is numerically proposed. Introduction of a comb-like structure in the resonator results in large group delay which can be tuned electrically. The proposed silicon-based nanophotonic structure incorporates comb-like design with copper-air subwavelength grating on SiO 2 which supports resonance enhanced propagation of hybrid plasmonic mode confined in 50 nm thick SiO 2 . The device with its engineered design shows an ultra-large group delay of 208 ps for 1 mm length. The proposed device also exhibits a voltage tunable group delay with a tuning of 48 ps on varying the voltage from −5 V to 5 V. The proposed device with its CMOS compatible and scalable design is useful for integrated optoelectronic circuits. The reported large delay and wide tuning make it a perfect candidate for applications in optical delay lines, signal processing, beam steering in phase array antennas and in microwave photonics.


  • Open Access

    Efficient Photodetector Based on Sub-Bandgap Transition in Silicon-ITO Distributed-Heterojunctions

    by Swati Rajput, Vishal Kaushik, Lalit Singh, Sulabh Suresh Kumar Pandey, Rahul Dev Mishra, Mukesh Kumar

    An efficient photodetector based on the sub-bandgap transition in Silicon-Indium Tin Oxide (ITO) distributed heterojunctions in form of a grating is demonstrated. The barrier height of 0.45 eV across n: Si - n: ITO heterojunction is sufficient to knock out the electrons to be photoexcited from ITO to Si for a wide wavelength around 1550 nm without using any plasmonic interaction. The n: Si - n: ITO grating structure with high refractive index contrast provides enhanced light-matter interaction and improved absorption efficiency. A large amount of photoexcitation resulting from the distributed heterojunctions leads to an improved responsivity as compared to the single planar heterojunction. We report a responsivity of 0.28 A/W at 1550 nm wavelength in a sub-bandgap regime which is higher than that of photodetectors with metal/2D materials using plasmonic interactions. The responsivity remains acceptably high for a wide wavelength range of 1530 nm-1570 nm.


  • Electrically Controlled Nanophotonic Slot Structure Based on Photocatalytic Nanocomposite for Optical Detection of Foodborne Pathogens

    by Sulabh Srivastava, Lalit Singh, Vishal Kaushik, Swati Rajput, Sourabh Jain, Manoj Kumar Pal, Mukesh Kumar

    A nanophotonic structure with electric control based photocatalytic nanocomposite is proposed to realize label-free optical detection of foodborne pathogens. The photocatalytic response of Cu-ZnO/TiO 2 (CZT) nanocomposite, in terms of the photocurrent, is utilized to detect E. coli in the surrounding media of Luria Bertani broth (LB) solution. An engineered nanophotonic structure based on an optical slot waveguide is presented to provide a two-fold benefit - enhanced light-matter interaction and flexibility to accommodate bio-sample. CZT nanocomposite is synthesised and prepared by a cost-effective sol-gel process, acting as an active layer in the structure, is responsible for the generation of photo-excited carriers which provide photocurrent on the application of a voltage. The fabricated structure with a synthesised nanocomposite slot waveguide exhibits a measured photocurrent of 22 μA with LB media, decreasing to a value of 13 μA in the presence of E. coli. The fabricated biosensor is capable of detecting E. coli bacteria concentrations of 5000 CFU/ml. Altogether a change in photocurrent of 9 μA is obtained with E. coli on applying a low voltage of 3.5 volts. The combination of photocatalytic nanocomposite with engineered optical waveguide carries great potential for applications in biochemical detection and in realizing other integrated photonic devices with slotted nanocomposites.


  • Optical modulator based on a silicon-ITO grating embedded rib structure with a tunable group delay

    by Swati Rajput, Vishal Kaushik, Lalit Singh, Sulabh Srivastava, Mukesh Kumar

    An optical modulator based on an engineered silicon-indium tin oxide (Si-ITO) structure is proposed with a tunable group delay. A large group delay is reported by slowing down the light in a Si-ITO grating embedded rib structure. Optical modulation and a tunable group delay are realized by utilizing the electrically tunable permittivity of ITO in the engineered waveguide. The extinction ratio over 8 dB for a 10 µm long device and the modulation efficiency around 12 V-µm are reported for a wide wavelength from 1530 to 1570 nm. The resulting modulation efficiency and the extinction ratio show a significant improvement as compared to conventional modulators based on rib waveguides. We also report around 82 psec electrical tuning in the group delay for a wide wavelength range. This concept is promising in view of realizing tunable delay lines, along with slow light modulators with a reduced device footprint and low energy dissipation.


  • Light Assisted Electro-Metallization in Resistive Switch With Optical Accessibility

    by Lalit Singh, Sulabh, Vishal Kaushik, Swati Rajput, Rahul Dev Mishra, Mukesh Kumar

    An optically assisted electrically writable non-volatile nanophotonic resistive switch based on silicon is proposed with an optical readout capability. The proposed scheme also address the issue of undesired current overshoot in resistive switches. Optical assistance is provided with the blue pump light which leads to the photogenrated charge carriers in the active $TiO_{2}$ layer to lower the set voltage and to improve the endurance of the device. A large hysteresis of the current loop in presence of a blue wavelength of light at lower voltages is observed with the proposed three-layered device of Ag/ $TiO_{2}$ /p-Si. The electrical resistive state of the device is readout at 1550-nm of wavelength with an optical extinction ratio of 16 dB for 1 mm long device. The optical guidance with the formation (low resistance state) and dissolution (high resistance state) of conductive path filament in the active layer of $TiO_{2}$ is also discussed. The proposed nanophotonic functionality can be useful in realizing ultra-compact on-chip devices for optical switching, modulation and neuromorphic computing.


  • Engineered nanophotonic waveguide with ultra-low dispersion

    by Rahul Dev Mishra, Lalit Singh, Swati Rajput, Vishal Kaushik, Sulabh Srivastava, Mukesh Kumar

    A silicon-based engineered hybrid plasmonic waveguide with ultra-low dispersion is proposed. The ridge-shaped structure of the nanophotonic waveguide enables nano-scale confinement with electrically tunable characteristics using the plasma dispersion effect in silicon. The waveguide exhibits ultra-low dispersion of 1.28 p s 2 / m at telecommunication wavelength (1550 nm) in C band together with dual flatband dispersion over a wavelength range of 370 nm. The hybrid plasmonic mode is made to be confined in 15 nm thick S i O 2 with a propagation loss of 15.3 dB/mm utilizing the engineered ridge structure comprising Si, S i O 2 , and gold. In addition, the proposed waveguide shows six zero-dispersion wavelengths. The imaginary and real parts of the effective refractive index of the guided hybrid plasmonic mode are reported to be tunable with the applied voltage. The reported numerical results can pave the way for achieving intensity modulators and other electrically tunable devices at telecommunication wavelengths. The ultra-low dispersion and electrical tuning make this nanophotonic waveguide an absolute contender for applications including efficient nonlinear signal processing such as wide wavelength conversion based on four-wave mixing, supercontinuum generation, and other nanoscale integrated photonic devices.