Kang Liang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kang Liang has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
- Yurong Ren
School of Materials Science and Engineering Jiangsu Province Engineering Research Center of Intelligent Manufacturing Technology for the New Energy Vehicle Power Battery Changzhou University Changzhou China
12 shared publications - Haiyan Wang
Hunan Provincial Key Laboratory of Chemical Power Sources, College of Chemistry and Chemical Engineering, Central South University, Changsha, 410083, P. R. China
4 shared publications Xiaobing Huang
College of Chemistry and Materials Engineering Hunan University of Arts and Science Hunan 415000 P. R. China
4 shared publications- Xiaobing Huang
College of Chemistry and Materials Engineering, Hunan University of Arts and Science, Changde 415000, P. R. China
3 shared publications Hongshun Zhao
School of Materials Science and Engineering Jiangsu Province Engineering Research Center of Intelligent Manufacturing Technology for the New Energy Vehicle Power Battery Changzhou Key Laboratory of Intelligent Manufacturing and Advanced Technology for Power Battery Changzhou University Changzhou 213164 P. R. China
2 shared publicationsJianbin Li
School of Materials Science and Engineering Jiangsu Province Engineering Research Center of Intelligent Manufacturing Technology for the New Energy Vehicle Power Battery Changzhou Key Laboratory of Intelligent Manufacturing and Advanced Technology for Power Battery Changzhou University Changzhou 213164 P. R. China
2 shared publications
Latest Publications
- 18 October 2026
- Published by Wiley in Advanced Energy Materials
Ligand Electronics and Metal‐Site Acidity Enable High‐Voltage MOF Electrolytes for Quasi‐Solid‐State Lithium‐Metal Batteries
Lithium‐metal batteries (LMBs) coupled with Ni‐rich cathodes offer high energy density for next‐generation energy storage. Their practical implementation, however, is limited by electrolyte oxidation and interfacial degradation under high voltage. Metal‐organic frameworks (MOFs) would regulate ion solvation and stabilize electrode‐electrolyte interfaces in quasi‐solid‐state electrolytes, yet the molecular origins of their oxidation stability remain unclear. Here, we identify ligand electronics and metal‐site acidity as key descriptors for high‐voltage‐stable MOF electrolytes. Electron‐withdrawing ligands lower the HOMO energy levels of MOFs, while hard Lewis‐acidic Al sites further enhance oxidation resistance. Guided by this principle, we design a perfluorinated Al‐based MOF, Al‐FBDC, featuring a high oxidation onset potential of 4.82 V (vs. Li + /Li). Incorporating Al‐FBDC into a composite cathode reconstructs the local electrolyte environment at particle‐level interfaces, thereby suppressing parasitic reactions and cathode degradation under high‐voltage operation. As a result, Li||Al‐FBDC@NCM quasi‐solid‐state cells deliver excellent long‐term cycling stability and rate performance, retaining 82% of the capacity after 200 cycles at 1 C over 3.0‐4.5 V, while maintaining robust performance even at 4.6 and 4.8 V cut‐off voltages and with controlled electrolyte loading. This work identifies a general design principle for high‐voltage‐stable MOF electrolytes and offers a practical route toward high‐energy‐density LMBs.
- 18 October 2026
- Published by Wiley in Advanced Energy Materials
Ligand Electronics and Metal‐Site Acidity Enable High‐Voltage MOF Electrolytes for Quasi‐Solid‐State Lithium‐Metal Batteries
Lithium‐metal batteries (LMBs) coupled with Ni‐rich cathodes offer high energy density for next‐generation energy storage. Their practical implementation, however, is limited by electrolyte oxidation and interfacial degradation under high voltage. Metal‐organic frameworks (MOFs) would regulate ion solvation and stabilize electrode‐electrolyte interfaces in quasi‐solid‐state electrolytes, yet the molecular origins of their oxidation stability remain unclear. Here, we identify ligand electronics and metal‐site acidity as key descriptors for high‐voltage‐stable MOF electrolytes. Electron‐withdrawing ligands lower the HOMO energy levels of MOFs, while hard Lewis‐acidic Al sites further enhance oxidation resistance. Guided by this principle, we design a perfluorinated Al‐based MOF, Al‐FBDC, featuring a high oxidation onset potential of 4.82 V (vs. Li + /Li). Incorporating Al‐FBDC into a composite cathode reconstructs the local electrolyte environment at particle‐level interfaces, thereby suppressing parasitic reactions and cathode degradation under high‐voltage operation. As a result, Li||Al‐FBDC@NCM quasi‐solid‐state cells deliver excellent long‐term cycling stability and rate performance, retaining 82% of the capacity after 200 cycles at 1 C over 3.0‐4.5 V, while maintaining robust performance even at 4.6 and 4.8 V cut‐off voltages and with controlled electrolyte loading. This work identifies a general design principle for high‐voltage‐stable MOF electrolytes and offers a practical route toward high‐energy‐density LMBs.
- 20 April 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (28) , e73081
Active Sodium Occupancy Ratio‐A Guiding Descriptor for Predicting Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 Sodium Storage Performance
Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 (NFPP) has recently attracted extensive attention as a highly promising cathode material for sodium‐ion batteries. However, the intrinsic relationship between its local structure and electrochemical properties remains poorly understood, which is crucial for developing high‐performance NFPP. Herein, we propose and validate the Na1/Na4 occupancy ratio as a key descriptor for directly predicting electrochemical performance of NFPP. By precisely controlling the Na/Fe stoichiometric, a low Na1/Na4 occupancy ratio can be obtained, which activates dormant Na1 sites and reduces the Na + migration barrier, thereby optimizing ion‐diffusion pathways. NFPP prepared following this principle exhibits outstanding performance at Na1/Na4 ratio of 0.90, achieving a high specific capacity of 80.1 mAh g −1 at an ultra‐high rate of 50 C and retaining 85.7% of its initial capacity after 20 000 cycles. This work reveals a close correlation between the Na1/Na4 occupancy ratio and the electrochemical performance of NFPP, providing clear design guidelines for developing advanced NFPP cathodes.
- 20 April 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (28) , e73081
Active Sodium Occupancy Ratio‐A Guiding Descriptor for Predicting Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 Sodium Storage Performance
Na 4 Fe 3 (PO 4 ) 2 P 2 O 7 (NFPP) has recently attracted extensive attention as a highly promising cathode material for sodium‐ion batteries. However, the intrinsic relationship between its local structure and electrochemical properties remains poorly understood, which is crucial for developing high‐performance NFPP. Herein, we propose and validate the Na1/Na4 occupancy ratio as a key descriptor for directly predicting electrochemical performance of NFPP. By precisely controlling the Na/Fe stoichiometric, a low Na1/Na4 occupancy ratio can be obtained, which activates dormant Na1 sites and reduces the Na + migration barrier, thereby optimizing ion‐diffusion pathways. NFPP prepared following this principle exhibits outstanding performance at Na1/Na4 ratio of 0.90, achieving a high specific capacity of 80.1 mAh g −1 at an ultra‐high rate of 50 C and retaining 85.7% of its initial capacity after 20 000 cycles. This work reveals a close correlation between the Na1/Na4 occupancy ratio and the electrochemical performance of NFPP, providing clear design guidelines for developing advanced NFPP cathodes.
- 15 May 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (12) , 4228-4237
Microalloying induced stable welded interfaces for highly reversible zero-excess sodium metal batteries
A microalloying welding strategy modified by nano-zinc coating was proposed to construct sodophilic interfaces and form a thin and robust organic/inorganic hybrid SEI in situ.
- 15 May 2024
- Published by Royal Society of Chemistry (RSC) in Energy & Environmental Science
- Vol. 17 (12) , 4228-4237
Microalloying induced stable welded interfaces for highly reversible zero-excess sodium metal batteries
A microalloying welding strategy modified by nano-zinc coating was proposed to construct sodophilic interfaces and form a thin and robust organic/inorganic hybrid SEI in situ.
- 18 March 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (13) , 6016-6025
Interface Engineering Overall Seawater Splitting of Self-Supporting CeOx@NiCo2O4 Arrays
Exploring advanced electrocatalysts for overall seawater splitting is of great significance for large-scale green hydrogen production in which interface engineering has been considered as an effective strategy to enhance the intrinsic activities of the electrocatalysts. In this work, CeOx-modified NiCo2O4 nanoneedle arrays are designed and constructed in situ grown on Ni foam (NF) through a facile two-step synthesis method. Density functional theory calculations reveal that the strong interaction between CeOx and NiCo2O4 can regulate the electronic states of metal surfaces and optimize the electronic structures of the materials, essentially improving the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) properties. Specifically, in alkaline electrolytes, CeOx@NiCo2O4/NF exhibits superior electrocatalytic activities and stabilities, requiring overpotentials of 238 mV for the OER and 144 mV for the HER to achieve a current density of 10 mA cm-2. When applied to a simulated seawater splitting device, the CeOx@NiCo2O4/NF also maintains a battery voltage of 1.66 V to reach 10 mA cm-2 and exhibits good stability for over 60 h, with high faradic efficiencies (FEs) close to 100% for both the OER and HER.
- 18 March 2024
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 63 (13) , 6016-6025
Interface Engineering Overall Seawater Splitting of Self-Supporting CeOx@NiCo2O4 Arrays
Exploring advanced electrocatalysts for overall seawater splitting is of great significance for large-scale green hydrogen production in which interface engineering has been considered as an effective strategy to enhance the intrinsic activities of the electrocatalysts. In this work, CeOx-modified NiCo2O4 nanoneedle arrays are designed and constructed in situ grown on Ni foam (NF) through a facile two-step synthesis method. Density functional theory calculations reveal that the strong interaction between CeOx and NiCo2O4 can regulate the electronic states of metal surfaces and optimize the electronic structures of the materials, essentially improving the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) properties. Specifically, in alkaline electrolytes, CeOx@NiCo2O4/NF exhibits superior electrocatalytic activities and stabilities, requiring overpotentials of 238 mV for the OER and 144 mV for the HER to achieve a current density of 10 mA cm-2. When applied to a simulated seawater splitting device, the CeOx@NiCo2O4/NF also maintains a battery voltage of 1.66 V to reach 10 mA cm-2 and exhibits good stability for over 60 h, with high faradic efficiencies (FEs) close to 100% for both the OER and HER.
Engineering Crystal Growth and Surface Modification of Na3V2(PO4)2F3 Cathode for High‐Energy‐Density Sodium‐Ion Batteries
Na3V2(PO4)2F3 (NVPF) is a suitable cathode for sodium‐ion batteries owing to its stable structure. However, the large radius of Na+ restricts diffusion kinetics during charging and discharging. Thus, in this study, a phosphomolybdic acid (PMA)‐assisted hydrothermal method is proposed. In the hydrothermal process, the NVPF morphologies vary from bulk to cuboid with varying PMA contents. The optimal channel for accelerated Na+ transmission is obtained by cuboid NVPF. With nitrogen‐doping of carbon, the conductivity of NVPF is further enhanced. Combined with crystal growth engineering and surface modification, the optimal nitrogen‐doped carbon‐covered NVPF cuboid (c‐NVPF@NC) exhibits a high initial discharge capacity of 121 mAh g−1 at 0.2 C. Coupled with a commercial hard carbon (CHC) anode, the c‐NVPF@NC||CHC full battery delivers 118 mAh g−1 at 0.2 C, thereby achieving a high energy density of 450 Wh kg−1. Therefore, this work provides a novel strategy for boosting electrochemical performance by crystal growth engineering and surface modification.
Engineering Crystal Growth and Surface Modification of Na3V2(PO4)2F3 Cathode for High‐Energy‐Density Sodium‐Ion Batteries
Na3V2(PO4)2F3 (NVPF) is a suitable cathode for sodium‐ion batteries owing to its stable structure. However, the large radius of Na+ restricts diffusion kinetics during charging and discharging. Thus, in this study, a phosphomolybdic acid (PMA)‐assisted hydrothermal method is proposed. In the hydrothermal process, the NVPF morphologies vary from bulk to cuboid with varying PMA contents. The optimal channel for accelerated Na+ transmission is obtained by cuboid NVPF. With nitrogen‐doping of carbon, the conductivity of NVPF is further enhanced. Combined with crystal growth engineering and surface modification, the optimal nitrogen‐doped carbon‐covered NVPF cuboid (c‐NVPF@NC) exhibits a high initial discharge capacity of 121 mAh g−1 at 0.2 C. Coupled with a commercial hard carbon (CHC) anode, the c‐NVPF@NC||CHC full battery delivers 118 mAh g−1 at 0.2 C, thereby achieving a high energy density of 450 Wh kg−1. Therefore, this work provides a novel strategy for boosting electrochemical performance by crystal growth engineering and surface modification.
- Open Access
Mnx+ Substitution to Improve Na3V2(PO4)2F3-Based Electrodes for Sodium-Ion Battery Cathode
Na3V2(PO4)2F3 (NVPF) is an extremely promising sodium storage cathode material for sodium-ion batteries because of its stable structure, wide electrochemical window, and excellent electrochemical properties. Nevertheless, the low ionic and electronic conductivity resulting from the insulated PO43− structure limits its further development. In this work, the different valence states of Mnx+ ions (x = 2, 3, 4) doped NVPF were synthesized by the hydrothermal method. A series of tests and characterizations reveals that the doping of Mn ions (Mn2+, Mn3+, Mn4+) changes the crystal structure and also affects the residual carbon content, which further influences the electrochemical properties of NVPF-based materials. The sodiation/desodiation mechanism was also investigated. Among them, the as-prepared NVPF doped with Mn2+ delivers a high reversible discharge capacity (116.2 mAh g−1 at 0.2 C), and the capacity retention of 67.7% after 400 cycles at 1 C was obtained. Such excellent performance and facile modified methods will provide new design ideas for the development of secondary batteries.
Open AccessMnx+ Substitution to Improve Na3V2(PO4)2F3-Based Electrodes for Sodium-Ion Battery Cathode
Na3V2(PO4)2F3 (NVPF) is an extremely promising sodium storage cathode material for sodium-ion batteries because of its stable structure, wide electrochemical window, and excellent electrochemical properties. Nevertheless, the low ionic and electronic conductivity resulting from the insulated PO43− structure limits its further development. In this work, the different valence states of Mnx+ ions (x = 2, 3, 4) doped NVPF were synthesized by the hydrothermal method. A series of tests and characterizations reveals that the doping of Mn ions (Mn2+, Mn3+, Mn4+) changes the crystal structure and also affects the residual carbon content, which further influences the electrochemical properties of NVPF-based materials. The sodiation/desodiation mechanism was also investigated. Among them, the as-prepared NVPF doped with Mn2+ delivers a high reversible discharge capacity (116.2 mAh g−1 at 0.2 C), and the capacity retention of 67.7% after 400 cycles at 1 C was obtained. Such excellent performance and facile modified methods will provide new design ideas for the development of secondary batteries.
- 17 February 2022
- Published by Wiley in Rare Metals
- Vol. 41 (5) , 1406-1409
Stabilization of Sb nanoparticles using metal–organic frameworks to obtain stable performance of anode material for sodium‐ion batteries
- 17 February 2022
- Published by Wiley in Rare Metals
- Vol. 41 (5) , 1406-1409
Stabilization of Sb nanoparticles using metal–organic frameworks to obtain stable performance of anode material for sodium‐ion batteries
- 1 December 2021
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 63, 566-573
Diethyl phenylphosphonite contributing to solid electrolyte interphase and cathode electrolyte interphase for lithium metal batteries
- 1 December 2021
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 63, 566-573
Diethyl phenylphosphonite contributing to solid electrolyte interphase and cathode electrolyte interphase for lithium metal batteries
- 22 December 2020
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 54 (10) , 104002
Improved Na storage performance of Na 3 V 2 (PO 4 ) 3 cathode material for sodium-ion batteries by K-Cl co-doping
As a promising cathode material for sodium-ion batteries (SIBs), Na 3 V 2 (PO 4 ) 3 (NVP), the typical NASICON (Na super-ionic conductor)-structure cathode material, has received much attention resulting from its high working potential and excellent structural stability. However, it has always suffered from low electroconductivity, which largely limits its application in SIBs. Herein, to improve the electrochemical performance, we developed potassium and chlorine co-doped Na 3 V 2 (PO 4 ) 3 /carbon particles (NKVPCl/C) using a spray-drying method combined with a calcinating process and adopted them as cathode materials for SIBs. We studied in detail how K + and Cl − affected the electrochemical performance. The NKVPCl/C-2 particles displayed a highly initial discharge capacity of 109.6 mA h g −1 at 0.2 C, and had a superior cycling stable property (nearly 100% of initial discharge capacity after 500 cycles at 5 C). The excellent electrochemical performance of NKVPCl/C can be attributed to its higher Na + diffusion and electron conduction, which indicates that the strategy of co-doping K-Cl is an effective tactic for improving the property of NVP in SIBs.
- 22 December 2020
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 54 (10) , 104002
Improved Na storage performance of Na 3 V 2 (PO 4 ) 3 cathode material for sodium-ion batteries by K-Cl co-doping
As a promising cathode material for sodium-ion batteries (SIBs), Na 3 V 2 (PO 4 ) 3 (NVP), the typical NASICON (Na super-ionic conductor)-structure cathode material, has received much attention resulting from its high working potential and excellent structural stability. However, it has always suffered from low electroconductivity, which largely limits its application in SIBs. Herein, to improve the electrochemical performance, we developed potassium and chlorine co-doped Na 3 V 2 (PO 4 ) 3 /carbon particles (NKVPCl/C) using a spray-drying method combined with a calcinating process and adopted them as cathode materials for SIBs. We studied in detail how K + and Cl − affected the electrochemical performance. The NKVPCl/C-2 particles displayed a highly initial discharge capacity of 109.6 mA h g −1 at 0.2 C, and had a superior cycling stable property (nearly 100% of initial discharge capacity after 500 cycles at 5 C). The excellent electrochemical performance of NKVPCl/C can be attributed to its higher Na + diffusion and electron conduction, which indicates that the strategy of co-doping K-Cl is an effective tactic for improving the property of NVP in SIBs.