Jana Oborna
Jana Oborna has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
Ivana Marova
2 shared publicationsPavla Benesova
2 shared publications- Stanislav Obruca
Faculty of Chemistry, Brno University of Technology
2 shared publications Eleni Petala
Regional Centre of Advanced Technologies and Materials, Palacký University, Czech Republic
1 shared publication- Jan Filip
Regional Centre of Advanced Technologies and Materials, Czech Advanced Technology and Research Institute, Palacký University, Šlechtitelů 27, 779 00 Olomouc, Czech Republic
1 shared publication L. Mravcova
1 shared publication
Latest Publications
- 18 July 2017
- Published by WITPRESS LTD.
REDOX PROPERTIES OF IRON-BASED MATERIALS IN WATER TREATMENT TECHNOLOGIES: AN OVERVIEW OF LABORATORY VERSUS FIELD EXPERIENCES
Welcome to the WIT Press eLibrary - the home of the Transactions of the Wessex Institute collection, providing on-line access to papers presented at the Institute's prestigious international conferences and from its State-of-the-Art in Science & Engineering publications.
- 18 July 2017
- Published by WITPRESS LTD.
REDOX PROPERTIES OF IRON-BASED MATERIALS IN WATER TREATMENT TECHNOLOGIES: AN OVERVIEW OF LABORATORY VERSUS FIELD EXPERIENCES
Welcome to the WIT Press eLibrary - the home of the Transactions of the Wessex Institute collection, providing on-line access to papers presented at the Institute's prestigious international conferences and from its State-of-the-Art in Science & Engineering publications.
- 1 January 2016
- Published by Department of Polymer Engineering, Scientific Society of Mechanical Engineering in Express Polymer Letters
- Vol. 10 (5) , 361-372
The effect of PLGA-PEG-PLGA modification on the sol-gel transition and degradation properties
This paper deals with the influence of an incubation medium pH on the hydrolytic degradation of a novel thermosensitive biodegradable triblock copolymer based on hydrophilic poly(ethylene glycol) and hydrophobic copolymer poly(lactic acid-co-glycolic acid) (PLGA-PEG-PLGA), consequently modified at α,ω-ends with itaconic acid (ITA) resulting in α,ω-itaconyl(PLGA-PEG-PLGA). Itaconic acid, obtained from renewable resources, delivers a reactive double bond and carboxylic functional group to the end of PLGA-PEG-PLGA copolymer: this is important for a reaction with biologically active substances. The suitability of the sample degradation was assessed depending on whether the copolymer formed a gel at 37 °C. Two reversible physical sol-gel-sol transitions from a sol (liquid phase) to a gel (solid phase) and back to a sol (suspension) were verified using the tube inverting method. The hydrolytical degradation was evaluated at a physiological temperature (37 °C) in the presence of phosphate solutions, at a pH of either 4.2 or 7.4 by monitoring the decrease of the number average molecular weight of copolymers by GPC. Moreover, the degradation kinetics was confirmed by the HPLC/DAD method, where the increasing amount of final degradation products (lactic and glycolic acids) was detected. The study demonstrated that the carboxylic groups modified copolymer (ITA/PLGA–PEG– PLGA/ITA) is more susceptible to hydrolytical degradation than the unmodified copolymer within first days of degradation at pH 7.4
- 1 January 2016
- Published by Department of Polymer Engineering, Scientific Society of Mechanical Engineering in Express Polymer Letters
- Vol. 10 (5) , 361-372
The effect of PLGA-PEG-PLGA modification on the sol-gel transition and degradation properties
This paper deals with the influence of an incubation medium pH on the hydrolytic degradation of a novel thermosensitive biodegradable triblock copolymer based on hydrophilic poly(ethylene glycol) and hydrophobic copolymer poly(lactic acid-co-glycolic acid) (PLGA-PEG-PLGA), consequently modified at α,ω-ends with itaconic acid (ITA) resulting in α,ω-itaconyl(PLGA-PEG-PLGA). Itaconic acid, obtained from renewable resources, delivers a reactive double bond and carboxylic functional group to the end of PLGA-PEG-PLGA copolymer: this is important for a reaction with biologically active substances. The suitability of the sample degradation was assessed depending on whether the copolymer formed a gel at 37 °C. Two reversible physical sol-gel-sol transitions from a sol (liquid phase) to a gel (solid phase) and back to a sol (suspension) were verified using the tube inverting method. The hydrolytical degradation was evaluated at a physiological temperature (37 °C) in the presence of phosphate solutions, at a pH of either 4.2 or 7.4 by monitoring the decrease of the number average molecular weight of copolymers by GPC. Moreover, the degradation kinetics was confirmed by the HPLC/DAD method, where the increasing amount of final degradation products (lactic and glycolic acids) was detected. The study demonstrated that the carboxylic groups modified copolymer (ITA/PLGA–PEG– PLGA/ITA) is more susceptible to hydrolytical degradation than the unmodified copolymer within first days of degradation at pH 7.4
- 1 September 2014
- Published by Elsevier in Process Biochemistry
- Vol. 49 (9) , 1409-1414
Production of polyhydroxyalkanoates using hydrolysate of spent coffee grounds
- 1 September 2014
- Published by Elsevier in Process Biochemistry
- Vol. 49 (9) , 1409-1414
Production of polyhydroxyalkanoates using hydrolysate of spent coffee grounds
- 17 November 2013
- Published by Springer Nature in Biotechnology Letters
- Vol. 36 (4) , 775-781
Application of protease-hydrolyzed whey as a complex nitrogen source to increase poly(3-hydroxybutyrate) production from oils by Cupriavidus necator
Whole whey hydrolyzed by Alcalase (WWH) was tested as a complex nitrogen source for the production of poly(3-hydroxybutyrate) (PHB) from waste frying oils by Cupriavidus necator H16. Addition of WWH (10 % (v/v) of cultivation media) supported the growth and PHB accumulation; PHB yields in Erlenmeyer flasks were more than 3.5-fold higher than in control cultivations. The positive influence of WWH on PHB production was confirmed in experiments performed in laboratory fermentor. C. necator cultivated with WWH produced 28.1 g PHB l−1 resulting in a very high product yield coefficient of 0.94 g PHB per g oil. Since PHB yields were ~40 % higher than in the control cultivation, WWH can be considered as an excellent inexpensive nitrogen source for PHB production by C. necator.
- 17 November 2013
- Published by Springer Nature in Biotechnology Letters
- Vol. 36 (4) , 775-781
Application of protease-hydrolyzed whey as a complex nitrogen source to increase poly(3-hydroxybutyrate) production from oils by Cupriavidus necator
Whole whey hydrolyzed by Alcalase (WWH) was tested as a complex nitrogen source for the production of poly(3-hydroxybutyrate) (PHB) from waste frying oils by Cupriavidus necator H16. Addition of WWH (10 % (v/v) of cultivation media) supported the growth and PHB accumulation; PHB yields in Erlenmeyer flasks were more than 3.5-fold higher than in control cultivations. The positive influence of WWH on PHB production was confirmed in experiments performed in laboratory fermentor. C. necator cultivated with WWH produced 28.1 g PHB l−1 resulting in a very high product yield coefficient of 0.94 g PHB per g oil. Since PHB yields were ~40 % higher than in the control cultivation, WWH can be considered as an excellent inexpensive nitrogen source for PHB production by C. necator.