Paulo César Torres-Mayanga
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Paulo César Torres-Mayanga has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Lachos-Perez
University of Campinas – Unicamp
7 shared publications - Mauricio Ariel Rostagno
Multidisciplinary Laboratory of Food and Health (LabMAS), School of Applied Sciences (FCA), University of Campinas, Rua Pedro Zaccaria 1300, 13484-350, Limeira, São Paulo, Brazil
5 shared publications - Michael Thomas Timko
Department of Chemical Engineering, Worcester Polytechnic Institute, 100 Institute Road, Worcester, MA 01609, USA
5 shared publications - Rosana Goldbeck
Bioprocess and Metabolic Engineering Laboratory, Department Food Engineering and Technology, School of Food Engineering, Universidade Estadual de Campinas – Cidade Universitária Zeferino Vaz, Campinas, Brazil
4 shared publications T. Forster-Carneiro
4 shared publicationsTânia Forster-Carneiro
Multidisciplinary Laboratory in Food and Health, School of Applied Sciences, University of Campinas, Limeira, Brazil
4 shared publications
Latest Publications
- Open Access
- 17 April 2026
- Published by Elsevier in Food Bioscience
- Vol. 80
Laboratory scale-up of ultrasound-assisted extraction of phenolic compounds from tropical fruit peel by-products: modelling, on-line process monitoring, and product characterization
- 17 April 2026
- Published by Elsevier in Food Bioscience
- Vol. 80
Open AccessLaboratory scale-up of ultrasound-assisted extraction of phenolic compounds from tropical fruit peel by-products: modelling, on-line process monitoring, and product characterization
- Open Access
- 12 February 2026
- Published by Elsevier in SSRN Electronic Journal
Subcritical water extraction of phenolic compounds from Ganoderma applanatum: Process variables evaluation, bioactivity, and sustainability assessment
This study evaluates the recovery of phenolic compounds from the understudied Amazonian fungus Ganoderma applanatum using subcritical water extraction (SWE), a green alternative to conventional extraction methods. The effects of temperature (80 - 120 °C) and flow rate (2.5 - 5mL/min) on global yield, total phenolic content (TPC), and antioxidant activity (ABTS and DPPH) were systematically evaluated. The performance of SWE was benchmarked against Soxhlet extraction. SWE at 100 °C and 5mL/min achieved the higher yield of 4.6 ± 0.16%, a TPC of 438.54 ± 26.11 mg GAE/100 g, and potent antioxidant activity (ABTS: 1031.67 ± 27.16 mg GAE/100 g; DPPH: 872.54 ± 13.62 mg GAE/100 g) in only 56 min, far surpassing Soxhlet in efficiency and speed. UHPLC-DAD-MS analysis identified 14 major bioactive compounds, including phenolic acids, nucleosides, and triterpenoids, thereby confirming the chemical richness of the extracts. A quantitative sustainability assessment using the Path2Green metric (scale -1 to +1) yielded a score of +0.360, placing the process in the green zone and providing advantages in terms of solvent use, energy consumption, and time efficiency compared with conventional methods. These results highlight the potential of SWE as an efficient and sustainable strategy for valorizing G. applanatum as a high-value natural antioxidant for functional applications.
- 12 February 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSubcritical water extraction of phenolic compounds from Ganoderma applanatum: Process variables evaluation, bioactivity, and sustainability assessment
This study evaluates the recovery of phenolic compounds from the understudied Amazonian fungus Ganoderma applanatum using subcritical water extraction (SWE), a green alternative to conventional extraction methods. The effects of temperature (80 - 120 °C) and flow rate (2.5 - 5mL/min) on global yield, total phenolic content (TPC), and antioxidant activity (ABTS and DPPH) were systematically evaluated. The performance of SWE was benchmarked against Soxhlet extraction. SWE at 100 °C and 5mL/min achieved the higher yield of 4.6 ± 0.16%, a TPC of 438.54 ± 26.11 mg GAE/100 g, and potent antioxidant activity (ABTS: 1031.67 ± 27.16 mg GAE/100 g; DPPH: 872.54 ± 13.62 mg GAE/100 g) in only 56 min, far surpassing Soxhlet in efficiency and speed. UHPLC-DAD-MS analysis identified 14 major bioactive compounds, including phenolic acids, nucleosides, and triterpenoids, thereby confirming the chemical richness of the extracts. A quantitative sustainability assessment using the Path2Green metric (scale -1 to +1) yielded a score of +0.360, placing the process in the green zone and providing advantages in terms of solvent use, energy consumption, and time efficiency compared with conventional methods. These results highlight the potential of SWE as an efficient and sustainable strategy for valorizing G. applanatum as a high-value natural antioxidant for functional applications.
- Open Access
- 31 December 2025
- Published by Universidad Nacional Autonoma Altoandina De Tarma in Advances in Science and Innovation
- Vol. 4 (2) , 20-31
Influencia de condiciones de ultrasonido en compuestos bioactivos de Ganoderma spp. con aplicación en salud
El objetivo de este estudio fue analizar el efecto de diferentes condiciones de ultrasonido sobre la extracción de compuestos bioactivos en Ganoderma spp., con enfoque en sus posibles aplicaciones en el ámbito de la salud. Aunque este hongo es ampliamente valorado por sus propiedades medicinales, los métodos tradicionales de extracción presentan limitaciones que afectan negativamente el rendimiento y la biodisponibilidad de metabolitos esenciales, como triterpenos, polisacáridos y compuestos fenólicos.Para abordar estas limitaciones, se empleó una técnica de extracción asistida por ultrasonido (UAE, por sus siglas en inglés), utilizando un baño ultrasónico de 24 kHz durante 15 minutos a una temperatura controlada de 30 °C. Esta metodología permitió una ruptura parcial de las paredes celulares del micelio, favoreciendo la liberación de compuestos lipofílicos.Los resultados indicaron que la aplicación de ultrasonido como pretratamiento en el proceso de extracción lipídica generó una leve mejora en el rendimiento, aumentando la recuperación de lípidos del 0,46 % mediante el método convencional al 0,50 %. Además, se comprobó que las ondas ultrasónicas a 24 kHz producen fenómenos de cavitación acústica capaces de desestructurar matrices celulares sin comprometer la bioactividad de los metabolitos obtenidos.Estos hallazgos respaldan el uso de tecnologías ultrasónicas como una alternativa eficaz para optimizar tanto la eficiencia del proceso extractivo como la funcionalidad biológica de los compuestos presentes en Ganoderma spp., fortaleciendo así su potencial terapéutico en contextos nutracéuticos y farmacológicos.En conclusión, la extracción asistida por ultrasonido se perfila como una estrategia innovadora, sustentable y técnicamente escalable para la obtención de compuestos bioactivos de Ganoderma spp., contribuyendo de manera significativa al desarrollo de productos con impacto positivo en la salud humana.
- 31 December 2025
- Published by Universidad Nacional Autonoma Altoandina De Tarma in Advances in Science and Innovation
- Vol. 4 (2) , 20-31
Open AccessInfluencia de condiciones de ultrasonido en compuestos bioactivos de Ganoderma spp. con aplicación en salud
El objetivo de este estudio fue analizar el efecto de diferentes condiciones de ultrasonido sobre la extracción de compuestos bioactivos en Ganoderma spp., con enfoque en sus posibles aplicaciones en el ámbito de la salud. Aunque este hongo es ampliamente valorado por sus propiedades medicinales, los métodos tradicionales de extracción presentan limitaciones que afectan negativamente el rendimiento y la biodisponibilidad de metabolitos esenciales, como triterpenos, polisacáridos y compuestos fenólicos.Para abordar estas limitaciones, se empleó una técnica de extracción asistida por ultrasonido (UAE, por sus siglas en inglés), utilizando un baño ultrasónico de 24 kHz durante 15 minutos a una temperatura controlada de 30 °C. Esta metodología permitió una ruptura parcial de las paredes celulares del micelio, favoreciendo la liberación de compuestos lipofílicos.Los resultados indicaron que la aplicación de ultrasonido como pretratamiento en el proceso de extracción lipídica generó una leve mejora en el rendimiento, aumentando la recuperación de lípidos del 0,46 % mediante el método convencional al 0,50 %. Además, se comprobó que las ondas ultrasónicas a 24 kHz producen fenómenos de cavitación acústica capaces de desestructurar matrices celulares sin comprometer la bioactividad de los metabolitos obtenidos.Estos hallazgos respaldan el uso de tecnologías ultrasónicas como una alternativa eficaz para optimizar tanto la eficiencia del proceso extractivo como la funcionalidad biológica de los compuestos presentes en Ganoderma spp., fortaleciendo así su potencial terapéutico en contextos nutracéuticos y farmacológicos.En conclusión, la extracción asistida por ultrasonido se perfila como una estrategia innovadora, sustentable y técnicamente escalable para la obtención de compuestos bioactivos de Ganoderma spp., contribuyendo de manera significativa al desarrollo de productos con impacto positivo en la salud humana.
- 10 February 2023
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 17 (4) , 829-842
Detoxification of furanic aldehydes of the hemicellulosic hydrothermal hydrolysate of brewers’ spent grains by continuous adsorption on a fixed‐bed column
During the process of subcritical water hydrolysis of lignocellulosic compounds, such as brewers' spent grains, some toxic compounds can be formed due to the breakdown of the cellulose structure. These compounds are known as furanic aldehydes, and they are inhibitors of microorganisms that are used in different processes, such as fermentation and anaerobic digestion, among others. The detoxification and conditioning of these hydrolysates are required before their use in other processes that require low concentrations of toxins. One of the mechanisms that can be used to diminish those compounds is the adsorption process. For this reason, this study evaluated at‐line and in‐line purification strategies using different adsorbents in fixed‐bed columns to remove furanic aldehydes from a model feed simulating hydrolysate from subcritical water hydrolysis. The model feed consisted of simple sugars and furanic aldehydes at appropriate concentrations. The selected adsorbents were silica‐C18, hydrocarbons, and activated carbon. The results indicate that, among the adsorbents that were studied, activated carbon was the most efficient for the removal of both 5‐hydroxymethylfurfural and furfural. The activated carbon removed >99% of furanic aldehydes in the experiments conducted in the at‐line system. Sequential subcritical water hydrolysis followed by either at‐line or in‐line purification is promising for integrated inexpensive and efficient hydrolysate purification.
- 10 February 2023
- Published by Wiley in Biofuels, Bioproducts and Biorefining
- Vol. 17 (4) , 829-842
Detoxification of furanic aldehydes of the hemicellulosic hydrothermal hydrolysate of brewers’ spent grains by continuous adsorption on a fixed‐bed column
During the process of subcritical water hydrolysis of lignocellulosic compounds, such as brewers' spent grains, some toxic compounds can be formed due to the breakdown of the cellulose structure. These compounds are known as furanic aldehydes, and they are inhibitors of microorganisms that are used in different processes, such as fermentation and anaerobic digestion, among others. The detoxification and conditioning of these hydrolysates are required before their use in other processes that require low concentrations of toxins. One of the mechanisms that can be used to diminish those compounds is the adsorption process. For this reason, this study evaluated at‐line and in‐line purification strategies using different adsorbents in fixed‐bed columns to remove furanic aldehydes from a model feed simulating hydrolysate from subcritical water hydrolysis. The model feed consisted of simple sugars and furanic aldehydes at appropriate concentrations. The selected adsorbents were silica‐C18, hydrocarbons, and activated carbon. The results indicate that, among the adsorbents that were studied, activated carbon was the most efficient for the removal of both 5‐hydroxymethylfurfural and furfural. The activated carbon removed >99% of furanic aldehydes in the experiments conducted in the at‐line system. Sequential subcritical water hydrolysis followed by either at‐line or in‐line purification is promising for integrated inexpensive and efficient hydrolysate purification.
- Open Access
- 1 November 2021
- Published by Elsevier in Industrial Crops and Products
- Vol. 171
Techno-economic assessment of subcritical water hydrolysis process for sugars production from brewer’s spent grains
- 1 November 2021
- Published by Elsevier in Industrial Crops and Products
- Vol. 171
Open AccessTechno-economic assessment of subcritical water hydrolysis process for sugars production from brewer’s spent grains
- 1 October 2020
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 164
Subcritical water hydrolysis pretreatment of sugarcane bagasse to produce second generation ethanol
- 1 October 2020
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 164
Subcritical water hydrolysis pretreatment of sugarcane bagasse to produce second generation ethanol
- Top Cited PapersOpen Access
- 25 September 2020
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 8
Extraction of Flavonoids From Natural Sources Using Modern Techniques
Flavonoids are one of the main groups of polyphenols found in natural products. Traditional flavonoid extraction techniques are being replaced by advanced techniques to reduce energy and solvent consumption, increase efficiency and selectivity, to meet increased market demand and environmental regulations. Advanced technologies, such as microwaves, ultrasound, pressurized liquids, supercritical fluids, and electric fields, are alternatives currently being used. These modern techniques are generally faster, more environmentally friendly, and with higher automation levels compared to conventional extraction techniques. This review will discuss the different methods available for flavonoid extraction from natural sources and the main parameters involved (temperature, solvent, sample quantity, extraction time, among others). Recent trends and their industrial importance are also discussed in detail, providing insight into their potential. Thus, this paper seeks to review the innovations of compound extraction techniques, presenting in each of them their advantages and disadvantages, trying to offer a broader scope in the understanding of flavonoid extraction from different plant matrices.
- 25 September 2020
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 8
Top Cited PapersOpen AccessExtraction of Flavonoids From Natural Sources Using Modern Techniques
Flavonoids are one of the main groups of polyphenols found in natural products. Traditional flavonoid extraction techniques are being replaced by advanced techniques to reduce energy and solvent consumption, increase efficiency and selectivity, to meet increased market demand and environmental regulations. Advanced technologies, such as microwaves, ultrasound, pressurized liquids, supercritical fluids, and electric fields, are alternatives currently being used. These modern techniques are generally faster, more environmentally friendly, and with higher automation levels compared to conventional extraction techniques. This review will discuss the different methods available for flavonoid extraction from natural sources and the main parameters involved (temperature, solvent, sample quantity, extraction time, among others). Recent trends and their industrial importance are also discussed in detail, providing insight into their potential. Thus, this paper seeks to review the innovations of compound extraction techniques, presenting in each of them their advantages and disadvantages, trying to offer a broader scope in the understanding of flavonoid extraction from different plant matrices.
- 1 June 2020
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 160
Sequential subcritical water process applied to orange peel for the recovery flavanones and sugars
- 1 June 2020
- Published by Elsevier in The Journal of Supercritical Fluids
- Vol. 160
Sequential subcritical water process applied to orange peel for the recovery flavanones and sugars
- 1 July 2019
- Published by Oxford University Press (OUP) in FEMS Microbiology Letters
- Vol. 366 (13)
Analysis of metabolite profiles of Saccharomyces cerevisiae strains suitable for butanol production
Butanol has advantages over ethanol as a biofuel. Although butanol is naturally produced by some Clostridium species, clostridial fermentation has inherent characteristics that prevent its industrial application. Butanol-producing Saccharomyces cerevisiae strains may be a solution to this problem. The aim of this study was to evaluate the ability of wild-type and industrial Brazilian strains of S. cerevisiae to produce n-butanol using glycine as co-substrate and evaluate the relationship between the production of this alcohol and other metabolites in fermented broth. Of the 48 strains analyzed, 25 were able to produce n-butanol in a glycine-containing medium. Strains exhibited different profiles of n-butanol, isobutanol, ethanol, glycerol and acetic acid production. Some wild-type strains showed substantial n-butanol production capability, for instance UFMG-CM-Y267, which produced about 12.7 mg/L of butanol. Although this concentration is low, it demonstrates that wild-type S. cerevisiae can synthesize butanol, suggesting that selection and genetic modification of this microorganism could yield promising results. The findings presented here may prove useful for future studies aimed at optimizing S. cerevisiae strains for butanol production.
- 1 July 2019
- Published by Oxford University Press (OUP) in FEMS Microbiology Letters
- Vol. 366 (13)
Analysis of metabolite profiles of Saccharomyces cerevisiae strains suitable for butanol production
Butanol has advantages over ethanol as a biofuel. Although butanol is naturally produced by some Clostridium species, clostridial fermentation has inherent characteristics that prevent its industrial application. Butanol-producing Saccharomyces cerevisiae strains may be a solution to this problem. The aim of this study was to evaluate the ability of wild-type and industrial Brazilian strains of S. cerevisiae to produce n-butanol using glycine as co-substrate and evaluate the relationship between the production of this alcohol and other metabolites in fermented broth. Of the 48 strains analyzed, 25 were able to produce n-butanol in a glycine-containing medium. Strains exhibited different profiles of n-butanol, isobutanol, ethanol, glycerol and acetic acid production. Some wild-type strains showed substantial n-butanol production capability, for instance UFMG-CM-Y267, which produced about 12.7 mg/L of butanol. Although this concentration is low, it demonstrates that wild-type S. cerevisiae can synthesize butanol, suggesting that selection and genetic modification of this microorganism could yield promising results. The findings presented here may prove useful for future studies aimed at optimizing S. cerevisiae strains for butanol production.