Israel Martins Pereira
Research Subjects
Research Interests
Israel Martins Pereira has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Richardson Sales Rocha
State University of North Fluminense Darcy Ribeiro (UENF)
8 shared publications - Derivaldo Pureza da Cruz
Center for Agricultural Sciences and Technologies, State University of North Fluminense Darcy Ribeiro, Campos dos Goytacazes, Brazil
7 shared publications - Geraldo de Amaral Gravina
Universidade Estadual do Norte Fluminense Darcy Ribeiro (UENF), Brazil
7 shared publications - Mário Euclides Pechara da Costa Jaeggi
Universidade Estadual do Norte Fluminense, Brazil
7 shared publications - Rita de Kássia Guarnier da Silva
Universidade Estadual do Norte Fluminense Darcy Ribeiro
5 shared publications - Rogério Figueiredo Daher
Universidade Estadual do Norte Fluminense Darcy Ribeiro (UENF), Brazil
5 shared publications
Latest Publications
- Open Access
- 1 April 2021
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 39 (2) , 216-222
Influence of spacing and harvests on the production of scarlet eggplant and chicory under intercropping system
The aim of this study was to evaluate the fresh mass of scarlet eggplant (kg/pl) and the number of leaves of chicory (nºf/pl) in relation to the spacing used by the farmers of the region for both crops. The experiment evaluated these crops under intercropping cultivation system, varying the number of chicory rows between scarlet eggplant rows as well as harvests (cycle of each crop), for intercropping and monocropping systems. The treatments were T1= scarlet eggplant 0.7x1.1 m (monocropping); T2= intercropped scarlet eggplant, 0.7x1.5 m, with four rows of chicory, 0.2x0.2 m between rows; T3= intercropped scarlet eggplant, 0.7x1.1 m, with three rows and chicory, 0.2x0.2 m; T4= intercropped scarlet eggplant, 0.7x1.3 m, with four rows of chicory, 0.2x0.2 m; T5= intercropped scarlet eggplant, 0.7x1.3 m, with three rows of chicory, 0.2x0.2 m; T6= chicory 0.2x0.1x0.4 m in two double rows, 0.2 m between rows, 0.1 m between plants and 0.4 m between double rows in 1.5 m linear area (monocropping) and T7= chicory 0.2x0.3 m with three simple rows in an 1.5-m area (monocropping). The experimental design was of strip blocks, in a 5x16 factorial scheme, consisting of five spacings of scarlet eggplant (monocropping), 1.5x0.7 m, 1.3x0.7 m and 1.1x0.7 m, alternating the number of chicory rows between rows and 16 harvests in time, once a week. For chicory, the design was also in a 6x12 factorial scheme, with six spacings. The spacing 0.2x0.2 m was intercropped with scarlet eggplant, alternating the number of rows and two monocroppings 0.2x0.1x0.4 m in double rows and 0.2x0.3 m with 12 harvests in time, being performed one harvest per week along with the scarlet eggplant. Intercropped scarlet eggplant in spacing 0.7x1.5 m showed higher averages in some harvests followed by spacing 0.7x1.3 m with four chicory rows between rows. Spacings 0.2x0.1x0.4 m and 0.2x0.3 m were the ones which provided the best averages for chicory crop, except for the 5th harvest, in which spacing 0.2x0.2 m consisting of four chicory rows provided the highest average (5.7 leaves/plant). Regardless of monocropping and intercropping arrangement used for chicory the Area Equivalence Index (IEA) was over 1.6.
- 1 April 2021
- Published by FapUNIFESP (SciELO) in Horticultura Brasileira
- Vol. 39 (2) , 216-222
Open AccessInfluence of spacing and harvests on the production of scarlet eggplant and chicory under intercropping system
The aim of this study was to evaluate the fresh mass of scarlet eggplant (kg/pl) and the number of leaves of chicory (nºf/pl) in relation to the spacing used by the farmers of the region for both crops. The experiment evaluated these crops under intercropping cultivation system, varying the number of chicory rows between scarlet eggplant rows as well as harvests (cycle of each crop), for intercropping and monocropping systems. The treatments were T1= scarlet eggplant 0.7x1.1 m (monocropping); T2= intercropped scarlet eggplant, 0.7x1.5 m, with four rows of chicory, 0.2x0.2 m between rows; T3= intercropped scarlet eggplant, 0.7x1.1 m, with three rows and chicory, 0.2x0.2 m; T4= intercropped scarlet eggplant, 0.7x1.3 m, with four rows of chicory, 0.2x0.2 m; T5= intercropped scarlet eggplant, 0.7x1.3 m, with three rows of chicory, 0.2x0.2 m; T6= chicory 0.2x0.1x0.4 m in two double rows, 0.2 m between rows, 0.1 m between plants and 0.4 m between double rows in 1.5 m linear area (monocropping) and T7= chicory 0.2x0.3 m with three simple rows in an 1.5-m area (monocropping). The experimental design was of strip blocks, in a 5x16 factorial scheme, consisting of five spacings of scarlet eggplant (monocropping), 1.5x0.7 m, 1.3x0.7 m and 1.1x0.7 m, alternating the number of chicory rows between rows and 16 harvests in time, once a week. For chicory, the design was also in a 6x12 factorial scheme, with six spacings. The spacing 0.2x0.2 m was intercropped with scarlet eggplant, alternating the number of rows and two monocroppings 0.2x0.1x0.4 m in double rows and 0.2x0.3 m with 12 harvests in time, being performed one harvest per week along with the scarlet eggplant. Intercropped scarlet eggplant in spacing 0.7x1.5 m showed higher averages in some harvests followed by spacing 0.7x1.3 m with four chicory rows between rows. Spacings 0.2x0.1x0.4 m and 0.2x0.3 m were the ones which provided the best averages for chicory crop, except for the 5th harvest, in which spacing 0.2x0.2 m consisting of four chicory rows provided the highest average (5.7 leaves/plant). Regardless of monocropping and intercropping arrangement used for chicory the Area Equivalence Index (IEA) was over 1.6.
- Open Access
- 31 October 2020
- Published by Research, Society and Development in Research, Society and Development
- Vol. 9 (11)
Associations between morpho-agronomic characters in Conilon (Coffea canephora) 8142
The work consisted of the morpho agronomic evaluation of coffee crop under the influence of intercropping with different types of green manures. The experiment was carried out in the Southern Region of the State of Espírito Santo, Brazil. The experimental plot consisted of five plants per experimental unit, using the clone "Incaper 8142" Conilon Vitória, intercropping with different types of green manure plants, which were: guandu beans (Cajanus cajan), pig bean (Canavalia ensiformis), mucuna preta (Mucuna Pruriens) and Mexican margaridão (Tithonia diversifolia) in addition to a control treatment without green manure. The planting consisted of rows adjacent and located in the “upper interline” meaning is not clear of the coffee crop. The morpho agronomic characteristics evaluated were: plant height, orthotropic branch diameter, plagiotropic branch diameter, number of leaves, number of nodes, number of orthotropic branches, number of plagiotropic branches and productive nodes e productivity green coffee kg/ha, besides the main dependent: The characteristics of greatest direct contribution were number of nodes and number of productive nodes. The species of green fertilizer Mexican Margaridão (Tithonia diversifolia) provided a negative effect on the main variables related to production, and is not recommended for interplanting with robusta coffee.
- 31 October 2020
- Published by Research, Society and Development in Research, Society and Development
- Vol. 9 (11)
Open AccessAssociations between morpho-agronomic characters in Conilon (Coffea canephora) 8142
The work consisted of the morpho agronomic evaluation of coffee crop under the influence of intercropping with different types of green manures. The experiment was carried out in the Southern Region of the State of Espírito Santo, Brazil. The experimental plot consisted of five plants per experimental unit, using the clone "Incaper 8142" Conilon Vitória, intercropping with different types of green manure plants, which were: guandu beans (Cajanus cajan), pig bean (Canavalia ensiformis), mucuna preta (Mucuna Pruriens) and Mexican margaridão (Tithonia diversifolia) in addition to a control treatment without green manure. The planting consisted of rows adjacent and located in the “upper interline” meaning is not clear of the coffee crop. The morpho agronomic characteristics evaluated were: plant height, orthotropic branch diameter, plagiotropic branch diameter, number of leaves, number of nodes, number of orthotropic branches, number of plagiotropic branches and productive nodes e productivity green coffee kg/ha, besides the main dependent: The characteristics of greatest direct contribution were number of nodes and number of productive nodes. The species of green fertilizer Mexican Margaridão (Tithonia diversifolia) provided a negative effect on the main variables related to production, and is not recommended for interplanting with robusta coffee.
- Open Access
- 31 October 2020
- Published by Research, Society and Development in Research, Society and Development
- Vol. 9 (11)
Custo / benefício da adubação verde do consórcio no café conilon
O objetivo deste trabalho foi avaliar a relação custo/benefício e a viabilidade econômica do consórcio adubação verde em café conilon (Coffea canephora). O experimento consistiu-se em cinco consócios (tratamentos) de café com leguminosas, a saber: café + feijão guandu (Cajanu cajans L.); café + mucuna preta (Stizolobium aterrimum); café + feijão de porco (Canavalia ensiformis); café + margaridão mexicano (Tithonia diversifolia) e café solteiro (solo capinado). As avaliações foram feitas em 10 plantas de café por tratamento. O experimento foi conduzido em faixa, com o plantio das leguminosas nas entrelinhas. Custo Total CT = CFT + CVT, Custo operacional COP = CT – CO, Custo fixo médio CFMe = CFT/Q, Custo variável médio CVMe = CVT/Q, Custo total médio CTMe = CT/Q, Custo operacional médio CopMe = COp/Q, Renda bruta total RBT = PxQ, Renda líquida total RLT = RBT – CT, Renda líquida operacional Rlop = RBT – COP, Rentabilidade RT = RLT/Investimento x 100, Lucratividade LC = RLT/RBTx100, Ponto de nivelamento PN = CT/preço de mercado, Margem de segurança MS = RBT/RBTx100. O tratamento que se destacou foi o Margaridão mexicano, apresentando maior renda líquida na atividade econômica, permitindo uma oscilação tanto na produção quanto na comercialização da saca de café, sendo o mais recomendado. No segundo ano de avaliação, de forma geral, a adubação verde, apresentaram uma melhor rentabilidade e possuindo uma melhor produção comparado aos demais tratamentos. Nos Três anos de experimento, os adubos verdes proporcionaram maior produção em comparação ao tratamento Testemunha, com destaque para o Margaridão mexicano, nos anos de 2017 e 2018.
- 31 October 2020
- Published by Research, Society and Development in Research, Society and Development
- Vol. 9 (11)
Open AccessCusto / benefício da adubação verde do consórcio no café conilon
O objetivo deste trabalho foi avaliar a relação custo/benefício e a viabilidade econômica do consórcio adubação verde em café conilon (Coffea canephora). O experimento consistiu-se em cinco consócios (tratamentos) de café com leguminosas, a saber: café + feijão guandu (Cajanu cajans L.); café + mucuna preta (Stizolobium aterrimum); café + feijão de porco (Canavalia ensiformis); café + margaridão mexicano (Tithonia diversifolia) e café solteiro (solo capinado). As avaliações foram feitas em 10 plantas de café por tratamento. O experimento foi conduzido em faixa, com o plantio das leguminosas nas entrelinhas. Custo Total CT = CFT + CVT, Custo operacional COP = CT – CO, Custo fixo médio CFMe = CFT/Q, Custo variável médio CVMe = CVT/Q, Custo total médio CTMe = CT/Q, Custo operacional médio CopMe = COp/Q, Renda bruta total RBT = PxQ, Renda líquida total RLT = RBT – CT, Renda líquida operacional Rlop = RBT – COP, Rentabilidade RT = RLT/Investimento x 100, Lucratividade LC = RLT/RBTx100, Ponto de nivelamento PN = CT/preço de mercado, Margem de segurança MS = RBT/RBTx100. O tratamento que se destacou foi o Margaridão mexicano, apresentando maior renda líquida na atividade econômica, permitindo uma oscilação tanto na produção quanto na comercialização da saca de café, sendo o mais recomendado. No segundo ano de avaliação, de forma geral, a adubação verde, apresentaram uma melhor rentabilidade e possuindo uma melhor produção comparado aos demais tratamentos. Nos Três anos de experimento, os adubos verdes proporcionaram maior produção em comparação ao tratamento Testemunha, com destaque para o Margaridão mexicano, nos anos de 2017 e 2018.
- Open Access
- 31 October 2020
- Published by Research, Society and Development in Research, Society and Development
- Vol. 9 (11)
Cultivo do tomateiro em ambiente protegido sob diferentes tensões de água no solo
Diferentes cultivares de tomateiro podem apresentar necessidades hídricas diferenciadas, tornando-se indispensável o estudo da demanda hídrica. Desta forma, objetivou-se avaliar a influência de diferentes tensões de água no solo sobre a produção e qualidade pós-colheita de frutos do tomateiro, cultivar Dominador F1, sob cultivo protegido e irrigado por gotejamento. O experimento foi instalado em casa de vegetação com delineamento em blocos casualizados, com quatro repetições. Os tratamentos foram constituídos por seis tensões de água no solo como indicativos do momento de irrigar. As tensões preestabelecidas foram 20, 45, 70, 95, 120 e 145 kPa a 20 cm de profundidade. Aos 140 dias após o transplantio as variáveis avaliadas foram: produção total, comercial e não comercial de frutos; produtividade total, comercial e não comercial de frutos; número de frutos por planta; classificação dos frutos comerciais; massa média dos frutos comerciais; incidência de podridão apical (%); eficiência no uso da água (EUA); acidez titulável (AT); sólidos solúveis totais (SST); pH; relação sólidos solúveis totais e acidez titulável (SST/AT); pectina solúvel; vitamina C; firmeza; coloração e teor de macro e micronutrientes da parte aérea. Os resultados demonstraram que para a obtenção dos maiores valores de produção e produtividade de frutos comerciais, número de frutos por planta, número de frutos grandes e médios e massa média de frutos comerciais, deve-se irrigar quando a tensão de água no solo estiver, em torno, de 20 kPa, à profundidade de 0,20 m. As diferentes tensões de água no solo não influenciaram, significativamente, a acidez titulável, pH, relação sólidos solúveis totais e acidez titulável e pectina solúvel. A eficiência no uso da água, em função das tensões de água no solo, aumentou até a tensão de 116,57 kPa. Das características de qualidade avaliadas, os teores de sólidos solúveis totais, de vitamina C, firmeza e índice L* de coloração, apresentaram efeito significativo com as tensões de água no solo.
- 31 October 2020
- Published by Research, Society and Development in Research, Society and Development
- Vol. 9 (11)
Open AccessCultivo do tomateiro em ambiente protegido sob diferentes tensões de água no solo
Diferentes cultivares de tomateiro podem apresentar necessidades hídricas diferenciadas, tornando-se indispensável o estudo da demanda hídrica. Desta forma, objetivou-se avaliar a influência de diferentes tensões de água no solo sobre a produção e qualidade pós-colheita de frutos do tomateiro, cultivar Dominador F1, sob cultivo protegido e irrigado por gotejamento. O experimento foi instalado em casa de vegetação com delineamento em blocos casualizados, com quatro repetições. Os tratamentos foram constituídos por seis tensões de água no solo como indicativos do momento de irrigar. As tensões preestabelecidas foram 20, 45, 70, 95, 120 e 145 kPa a 20 cm de profundidade. Aos 140 dias após o transplantio as variáveis avaliadas foram: produção total, comercial e não comercial de frutos; produtividade total, comercial e não comercial de frutos; número de frutos por planta; classificação dos frutos comerciais; massa média dos frutos comerciais; incidência de podridão apical (%); eficiência no uso da água (EUA); acidez titulável (AT); sólidos solúveis totais (SST); pH; relação sólidos solúveis totais e acidez titulável (SST/AT); pectina solúvel; vitamina C; firmeza; coloração e teor de macro e micronutrientes da parte aérea. Os resultados demonstraram que para a obtenção dos maiores valores de produção e produtividade de frutos comerciais, número de frutos por planta, número de frutos grandes e médios e massa média de frutos comerciais, deve-se irrigar quando a tensão de água no solo estiver, em torno, de 20 kPa, à profundidade de 0,20 m. As diferentes tensões de água no solo não influenciaram, significativamente, a acidez titulável, pH, relação sólidos solúveis totais e acidez titulável e pectina solúvel. A eficiência no uso da água, em função das tensões de água no solo, aumentou até a tensão de 116,57 kPa. Das características de qualidade avaliadas, os teores de sólidos solúveis totais, de vitamina C, firmeza e índice L* de coloração, apresentaram efeito significativo com as tensões de água no solo.
- Open Access
- 31 October 2020
- Published by Research, Society and Development in Research, Society and Development
- Vol. 9 (11)
Optimal plot size for cabbage experiments
Among the factors that influence the detection of minimum significant differences between treatments in conventional experiments is the size of the plot, whose correct determination allows the reduction of experimental error, consequently, increases the precision of the experiment and the reliability of the interpretations and conclusions obtained. There are different methods to estimate the optimal plot size, which relate plot size and residual variation, highlighting among these the methods of maximum curvature, maximum modified curvature, maximum curvature of the coefficient of variation and regression with plateau response. In addition to these, there is the Hatheway method that takes into account factors such as number of treatments, repetitions and levels of significance. Since there is little work to estimate the optimal plot size in experiments with species of the genus Brassica, the present study aimed to increase the experimental precision in experiments with cabbage in the municipality of Alegre - ES by determining the optimal plot size with based on Hatheway's methods, maximum curvature, maximum curvature of the coefficient of variation and plateau regression. The work was carried out by means of a blank test carried out in the experimental area of the Center for Agricultural Sciences of the Federal University of Espírito Santo, Alegre - ES, in which both productive and growth variables were evaluated. At the end of the project, propose the optimal plot size to be used in experiments with cabbage in order to increase the experimental precision and the reliability of the results obtained in future experiments.
- 31 October 2020
- Published by Research, Society and Development in Research, Society and Development
- Vol. 9 (11)
Open AccessOptimal plot size for cabbage experiments
Among the factors that influence the detection of minimum significant differences between treatments in conventional experiments is the size of the plot, whose correct determination allows the reduction of experimental error, consequently, increases the precision of the experiment and the reliability of the interpretations and conclusions obtained. There are different methods to estimate the optimal plot size, which relate plot size and residual variation, highlighting among these the methods of maximum curvature, maximum modified curvature, maximum curvature of the coefficient of variation and regression with plateau response. In addition to these, there is the Hatheway method that takes into account factors such as number of treatments, repetitions and levels of significance. Since there is little work to estimate the optimal plot size in experiments with species of the genus Brassica, the present study aimed to increase the experimental precision in experiments with cabbage in the municipality of Alegre - ES by determining the optimal plot size with based on Hatheway's methods, maximum curvature, maximum curvature of the coefficient of variation and plateau regression. The work was carried out by means of a blank test carried out in the experimental area of the Center for Agricultural Sciences of the Federal University of Espírito Santo, Alegre - ES, in which both productive and growth variables were evaluated. At the end of the project, propose the optimal plot size to be used in experiments with cabbage in order to increase the experimental precision and the reliability of the results obtained in future experiments.
- 25 September 2020
- Published by Springer Nature in Euphytica
- Vol. 216 (10) , 1-11
Analysis of the phenotypic adaptability and stability of strains of cowpea through the GGE Biplot approach
- 25 September 2020
- Published by Springer Nature in Euphytica
- Vol. 216 (10) , 1-11
Analysis of the phenotypic adaptability and stability of strains of cowpea through the GGE Biplot approach
- Open Access
- 10 December 2019
- Published by Sciencedomain International in Journal of Experimental Agriculture International
- p. 1-8
Vegetative Development of Radish Seedlings in Different Organic Substrates
The objective of this work was to evaluate the vegetative development of radish seedlings in different organic substrates with seeds from two types of commercial packing. The completely randomized design was used in a 4 x 2 factorial scheme, consisting of four substrates (commercial, tanned bovine manure, mixed organic compound and vermicompost) and two seed packings (aluminized envelope and can), with eight replications, totalizing 64 seedlings. The biometric evaluations of the seedlings were carried out on the 14th day after sowing, and the following phytotechnical parameters were evaluated: leaf number, total fresh mass; fresh mass from aerial part and fresh mass from the root. According to the results, the commercial, vermicompost and mixed organic substrates provided the best results for the variables evaluated when the can was used.
- 10 December 2019
- Published by Sciencedomain International in Journal of Experimental Agriculture International
- p. 1-8
Open AccessVegetative Development of Radish Seedlings in Different Organic Substrates
The objective of this work was to evaluate the vegetative development of radish seedlings in different organic substrates with seeds from two types of commercial packing. The completely randomized design was used in a 4 x 2 factorial scheme, consisting of four substrates (commercial, tanned bovine manure, mixed organic compound and vermicompost) and two seed packings (aluminized envelope and can), with eight replications, totalizing 64 seedlings. The biometric evaluations of the seedlings were carried out on the 14th day after sowing, and the following phytotechnical parameters were evaluated: leaf number, total fresh mass; fresh mass from aerial part and fresh mass from the root. According to the results, the commercial, vermicompost and mixed organic substrates provided the best results for the variables evaluated when the can was used.
- Open Access
- 21 August 2019
- Published by Sciencedomain International in Journal of Experimental Agriculture International
- p. 1-11
Path Analysis of Vegetative Characteristics in Conilon Coffee Production Consortiated with Green Fertilizers in Tropical Climate
The objective of this study was to evaluate the relationship between morphoagronomic characters and coffee productivity and their direct and indirect effects under the influence of different types of green fertilizers. The experiment was carried out in the field followed by the sampling method in a pre-established coffee plantation, installed in soil with a slope of 11% in the Southern Region of the State of Espírito Santo. The intercropping of coffee with green fertilizers studied were pigeon pea, jack bean, velvet bean, and wild Mexican sunflower, as well as a control treatment without green fertilizers. The experimental unit consisted of a coffee plant, clonal variety "Incaper 8142" Conilon Vitoria, with a spacing of 2.30 x 2.60 meters, with a crop age of seven years, using the border of at least one coffee plant between experimental units. Eight morphoagronomic characteristics were measured, having as main dependent variable the productivity (in kg per plant) obtained in the harvest of 2015, and as primary explanatory characteristics: plant height, orthotropic branch diameter, plagiotropic branch diameter, number of leaves, number of nodes, number of orthotropic branches, number of plagiotropic branches and number of productive nodes. To increase productivity, coffee plants with the highest number of orthotropic branches and number of plagiotropic branches should be selected. The characteristics of greater direct contribution were a number of nodes and the number of productive nodes.
- 21 August 2019
- Published by Sciencedomain International in Journal of Experimental Agriculture International
- p. 1-11
Open AccessPath Analysis of Vegetative Characteristics in Conilon Coffee Production Consortiated with Green Fertilizers in Tropical Climate
The objective of this study was to evaluate the relationship between morphoagronomic characters and coffee productivity and their direct and indirect effects under the influence of different types of green fertilizers. The experiment was carried out in the field followed by the sampling method in a pre-established coffee plantation, installed in soil with a slope of 11% in the Southern Region of the State of Espírito Santo. The intercropping of coffee with green fertilizers studied were pigeon pea, jack bean, velvet bean, and wild Mexican sunflower, as well as a control treatment without green fertilizers. The experimental unit consisted of a coffee plant, clonal variety "Incaper 8142" Conilon Vitoria, with a spacing of 2.30 x 2.60 meters, with a crop age of seven years, using the border of at least one coffee plant between experimental units. Eight morphoagronomic characteristics were measured, having as main dependent variable the productivity (in kg per plant) obtained in the harvest of 2015, and as primary explanatory characteristics: plant height, orthotropic branch diameter, plagiotropic branch diameter, number of leaves, number of nodes, number of orthotropic branches, number of plagiotropic branches and number of productive nodes. To increase productivity, coffee plants with the highest number of orthotropic branches and number of plagiotropic branches should be selected. The characteristics of greater direct contribution were a number of nodes and the number of productive nodes.
- Open Access
- 27 May 2019
- Published by Sciencedomain International in Journal of Experimental Agriculture International
- p. 1-10
Evaluation of Physiological Quality of Seeds of Improved Snap Bean Lines under Different Storage
Seed quality is a key factor to succeed in a yield generation and storage is an important activity to control the physiological seed quality, as it preserves seed viability while maintaining its robustness at a reasonable level between planting and harvest. On this basis, the goal of this study was to evaluate the physiological quality of snap bean seeds stored in different types of packages and storage conditions. Eight genotypes comprising six lines and two controls were analyzed. It was applied a completely randomized block design with four replicates in a factorial scheme (8×2×2×7).Seed storage was performed in permeable and impermeable packages under controlled and uncontrolled conditions. The physiological seed quality was evaluated by means of germination and vigor tests. The different types of package and storage conditions influenced the physiological seed quality. Under controlled storage conditions, the permeable and impermeable packages were more efficient in controlling the physiological quality of snap bean seeds.
- 27 May 2019
- Published by Sciencedomain International in Journal of Experimental Agriculture International
- p. 1-10
Open AccessEvaluation of Physiological Quality of Seeds of Improved Snap Bean Lines under Different Storage
Seed quality is a key factor to succeed in a yield generation and storage is an important activity to control the physiological seed quality, as it preserves seed viability while maintaining its robustness at a reasonable level between planting and harvest. On this basis, the goal of this study was to evaluate the physiological quality of snap bean seeds stored in different types of packages and storage conditions. Eight genotypes comprising six lines and two controls were analyzed. It was applied a completely randomized block design with four replicates in a factorial scheme (8×2×2×7).Seed storage was performed in permeable and impermeable packages under controlled and uncontrolled conditions. The physiological seed quality was evaluated by means of germination and vigor tests. The different types of package and storage conditions influenced the physiological seed quality. Under controlled storage conditions, the permeable and impermeable packages were more efficient in controlling the physiological quality of snap bean seeds.