Reza Keshavarzi

Perovskite solar cells (PSCs) based on metal halides have garnered significant attention due to their exceptional power conversion efficiency (PCE) and compatibility with low-temperature fabrication processes. However, the development of stable and inexpensive carbon electrodes remains hindered by issues such as insufficient conductivity at the carbon electrode/perovskite interface and weak coupling strength. In this study, we employed a functionalized carbazole–cellulose composite (C–Cz) as an alternative binder to construct highly stable carbon electrodes for PSCs. The incorporation of C–Cz enhances electron interactions through its conjugated carbazole moieties, while the cellulose backbone facilitates uniform dispersion of carbon particles and forms continuous transport pathways. These synergistic effects significantly optimize interfacial energy alignment and defect passivation. Ultimately, p-i-n PSCs fabricated with C–Cz carbon paste electrodes achieved a champion PCE of 16.79%, substantially outperforming the control device using a conventional PMMA binder (10.56%). Notably, the exceptional hydrophobicity and defect passivation capabilities of the C–Cz electrode substantially enhance device durability—maintaining over 95% of initial efficiency after 400 h of continuous maximum power point tracking irradiation. This study reveals an effective adhesive engineering strategy for robust, scalable carbon electrodes, paving new pathways for practical applications in stable perovskite photovoltaics.

Sunlight in the CsPbBr ₃ perovskite generates e ⁻ /h ⁺ pairs; the inverse opal scaffold enhances light absorption and charge separation, enabling electrons and holes to drive water splitting, producing H ₂ and O ₂ , with arrows showing charge paths.

Organometal halide perovskite solar cells have reached a high power conversion efficiency of up to 25.8% but suffered from poor long-term stability against environmental factors such as ultraviolet irradiation and humidity of the environment. Herein, two different multifunctional transparent coatings containing AZO and ZnO porous UV light absorbers were employed on the front of the PSCs. This strategy is designed to improve the long-term stability of PSCs against UV irradiation. Moreover, the provided coatings exhibit two additional roles, including self-cleaning and high wear resistance. In this regard, AZO coating showed higher wear resistance compared to the ZnO coating. The photocatalytic self-cleaning properties of these prepared coatings make them stable against environmental pollutants. Furthermore, appropriate mechanical properties such as high hardness and low coefficient of friction that leads to high resistance against wear are other features of these coatings. The devices with AZO/Glass/FTO/meso-TiO₂/Perovskite/spiro/Au and ZnO/Glass/FTO/meso-TiO₂/Perovskite/spiro/Au configurations maintained 40% and 30% of their initial performance for 100 h during 11 days (9 h per day) against the UV light with the high intensity of 50 mW cm^-2 which is due to higher absorption of AZO compared with ZnO in the ultraviolet region. Since AZO has a higher light transmission in the visible region in comparison to ZnO, perovskite cells with AZO protective layers have higher efficiency than perovskite cells with ZnO layers. It is worth noting that the mentioned features make these coatings usable for cover glass in all types of solar cells.

Inorganic hole-transport materials (HTMs) such as copper indium disulfide (CIS) have been applied in perovskite solar cells (PSCs) to improve the poor stability of the conventional Spiro-based PSCs. However, CIS-PSCs' main drawback is their lower efficiency than Spiro-PSCs. In this work, copolymer-templated TiO₂ (CT-TiO₂) structures have been used as an electron transfer layer (ETL) to improve the photocurrent density and efficiency of CIS-PSCs. Compared to the conventional random porous TiO₂ ETLs, copolymer-templated TiO₂ ETLs with a lower refractive index improve the transmittance of input light into the cell and therefore enhance the photovoltaic performance. Interestingly, a large number of surface hydroxyl groups on the CT-TiO₂ induce a self-healing effect in perovskite. Thus, they provide superior stability in CIS-PSC. The fabricated CIS-PSC presents a conversion efficiency of 11.08% (Jsc = 23.35 mA/cm², Voc = 0.995, and FF = 0.477) with a device area of 0.09 cm² under 100 mW/cm². Moreover, these unsealed CIS-PSCs retained 100% of their performance after aging tests for 90 days under ambient conditions and even increased from 11.08 to 11.27 over time due to self-healing properties.

This work utilizes a realistic electro-optical coupled simulation to study the (i) impact of mesoporous TiO₂ removal; (ii) the embedding of Ag@SiO₂ and SiO₂@Ag@SiO₂ plasmonic nanoparticles; (iii) utilization of solution-processed inorganic p-type copper(I) thiocyanate (CuSCN) layer at the perovskite/carbon interface; and (iv) the increase of the work function of carbon electrodes (via incorporation of suitable additives/binders to the carbon ink) on the performance of carbon-based PSCs. Removal of mesoporous TiO₂ increased the power conversion efficiency (PCE) of the device from 14.83 to 16.50% due to the increase in exciton generation rate and charge carriers’ mobility in the vicinity of the perovskite-compact TiO₂ interface. Subsequently, variable mass ratios of Ag@SiO₂ and SiO₂@Ag@SiO₂ plasmonic nanoparticles are embedded in the vicinity of the perovskite-compact TiO₂ interface. In the optimum cases, the PCE of the devices increased to 19.72% and 18.92%, respectively, due to light trapping, scattering, and strong plasmonic fields produced by the plasmonic nanoparticles. Furthermore, adding the CuSCN layer remarkably increased the PCE of the device with a 0.93% mass ratio of Ag@SiO₂ nanoparticles from 19.72 to 26.58% by a significant improvement of V_oc and FF, due to the proper interfacial energy band alignment and the reduction of the recombination current density. Similar results were obtained by increasing the carbon work function, and the cell PCE was enhanced up to 26% in the optimal scenario. Our results pave the way to achieve high efficiencies in remarkably stable printable carbon-based PSCs.

Despite the outstanding role of mesoscopic structures on the efficiency and stability of perovskite solar cells (PSCs) in the regular (n–i–p) architecture, mesoscopic PSCs in inverted (p–i–n) architecture have rarely been reported. Herein, an efficient and stable mesoscopic NiO_x (mp‐NiO_x) scaffold formed via a simple and low‐cost triblock copolymer template‐assisted strategy is employed, and this mp‐NiO_x film is utilized as a hole transport layer (HTL) in PSCs, for the first time. Promisingly, this approach allows the fabrication of homogenous, crack‐free, and robust 150 nm thick mp‐NiO_x HTLs through a facile chemical approach. Such a high‐quality templated mp‐NiO_x structure promotes the growth of the perovskite film yielding better surface coverage and enlarged grains. These desired structural and morphological features effectively translate into improved charge extraction, accelerated charge transportation, and suppressed trap‐assisted recombination. Ultimately, a considerable efficiency of 20.2% is achieved with negligible hysteresis which is among the highest efficiencies for mp‐NiO_x based inverted PSCs so far. Moreover, mesoscopic devices indicate higher long‐term stability under ambient conditions compared to planar devices. Overall, these results may set new benchmarks in terms of performance for mesoscopic inverted PSCs employing templated mp‐NiO_x films as highly efficient, stable, and easy fabricated HTLs.