Mario Cappellette Junior
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mario Cappellette Junior has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Reginaldo Raimundo Fujita
Department of Otorhinolaryngology, Escola Paulista de Medicina, Universidade Federal de São Paulo (UNIFESP), São Paulo, Brazil
7 shared publications - Gustavo Antonio Moreira
Universidade Federal de São Paulo (UNIFESP), Departamento de Psicobiologia, São Paulo, SP, Brazil
4 shared publications - Rita Catia Brás Bariani
Universidade Federal de São Paulo (Unifesp), Departamento de Otorrinolaringologia e Cirurgia de Cabeça e Pescoço, São Paulo, SP, Brazil
4 shared publications - Fauze Ramez Badreddine
Universidade Federal de São Paulo (Unifesp), Departamento de Otorrinolaringologia e Cirurgia de Cabeça e Pescoço, São Paulo, SP, Brazil
3 shared publications Luc Louis Maurice Weckx
3 shared publicationsShirley Shizue Nagata Pignatari
Universidade Federal de São Paulo, Departamento de Otorrinolaringologia e Cirurgia de Cabeça e Pescoço (São Paulo/SP, Brasil)
3 shared publications
Latest Publications
- 1 March 2022
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology (Versão em Português)
- Vol. 88 (2) , 263-278
Eficácia dos aparelhos ortodônticos funcionais no tratamento da apneia obstrutiva do sono em crianças: revisão da literatura
- 1 March 2022
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology (Versão em Português)
- Vol. 88 (2) , 263-278
Eficácia dos aparelhos ortodônticos funcionais no tratamento da apneia obstrutiva do sono em crianças: revisão da literatura
- Open Access
- 15 February 2022
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology
- Vol. 88 (5) , S100-S107
Three-dimensional image study of accelerated maxillary expansion in oral breathing kids
- 15 February 2022
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology
- Vol. 88 (5) , S100-S107
Open AccessThree-dimensional image study of accelerated maxillary expansion in oral breathing kids
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 27 (5) , e222115
Evaluation of palatal dimensions in different facial patterns by using digital dental casts
Objective: To analyze the variations of hard palate volume in adults with normal occlusion and different facial types and patterns, by using a three-dimensional analysis on digital casts. Methods: The dental casts of 70 Caucasian adults (28 men, 42 women), mean age of 16.4 years (SD 1.3 years), were scanned by using a tridimensional scanner (Delcam PowerSHAPE™, 2010, Birmingham, UK). Close points were selected in the gingival and cervical regions on the lingual surface of the maxillary teeth, to analyze palatal morphology. The facial patterns and types, and the measurements (width, length, height, volume) of the space on the hard palate were compared using analysis of covariance (ANCOVA), with age as the covariate, and sex as the independent variable. The significance level of 5% (p < 0.05) was adopted. Results: This study showed that the measurements of the width and length were similar among the mesofacial, dolichofacial and brachyfacial facial types, although the height and volume of the space on the hard palate were slightly smaller in dolichofacial individuals, and both Pattern I and Pattern II individuals showed no significant changes for the four measurements. The mean values among facial patterns were: Pattern I - width 38.31±2.59 mm; length 37.44±2.42 mm; height 17.03±2.42 mm and volume 10.52±1.72 mm3; Pattern II - width 37.48±2.44 mm; length 37.48±2.44 mm; height 16.79±2.42 mm and volume 10.41±1.65 mm3 (p>0.05 for all variables). Conclusion: There were no significant differences for the facial patterns and facial types of the individuals compared in the analyzed sample.
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 27 (5) , e222115
Open AccessEvaluation of palatal dimensions in different facial patterns by using digital dental casts
Objective: To analyze the variations of hard palate volume in adults with normal occlusion and different facial types and patterns, by using a three-dimensional analysis on digital casts. Methods: The dental casts of 70 Caucasian adults (28 men, 42 women), mean age of 16.4 years (SD 1.3 years), were scanned by using a tridimensional scanner (Delcam PowerSHAPE™, 2010, Birmingham, UK). Close points were selected in the gingival and cervical regions on the lingual surface of the maxillary teeth, to analyze palatal morphology. The facial patterns and types, and the measurements (width, length, height, volume) of the space on the hard palate were compared using analysis of covariance (ANCOVA), with age as the covariate, and sex as the independent variable. The significance level of 5% (p < 0.05) was adopted. Results: This study showed that the measurements of the width and length were similar among the mesofacial, dolichofacial and brachyfacial facial types, although the height and volume of the space on the hard palate were slightly smaller in dolichofacial individuals, and both Pattern I and Pattern II individuals showed no significant changes for the four measurements. The mean values among facial patterns were: Pattern I - width 38.31±2.59 mm; length 37.44±2.42 mm; height 17.03±2.42 mm and volume 10.52±1.72 mm3; Pattern II - width 37.48±2.44 mm; length 37.48±2.44 mm; height 16.79±2.42 mm and volume 10.41±1.65 mm3 (p>0.05 for all variables). Conclusion: There were no significant differences for the facial patterns and facial types of the individuals compared in the analyzed sample.
- Open Access
- 14 March 2021
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology
- Vol. 88 (2) , 263-278
Effectiveness of functional orthodontic appliances in obstructive sleep apnea treatment in children: literature review
- 14 March 2021
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology
- Vol. 88 (2) , 263-278
Open AccessEffectiveness of functional orthodontic appliances in obstructive sleep apnea treatment in children: literature review
- Open Access
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 26 (3) , e2119234
3D technology to measure dental arches and create a template for lingual brackets technique
Objective: This study aims at identifying anatomical dimensions of dental arches, based on landmarks currently used in the lingual orthodontic technique, and create an archwire form template to be used in orthodontic clinics. Methods: Maxillary and mandibular dental casts of 140 Caucasian individuals with natural and normal occlusion were digitized (3D), and the images were analyzed with Delcam Power ShapeTM 2010 software. The dental arch shapes and sizes were obtained from 14 landmarks selected on the lingual surface of the teeth. Points and segments defined by the software were used to create an archwire form template. Results: Various dental arch patterns were found for both maxilla and mandible. The smallest sizes were found in females, and the largest were found in male subjects. Six categories were defined for each gender, three for the maxilla and three for the mandible (Small, Medium and Large). A template was created with eighteen anatomic lingual archwire designs, nine for the maxilla and nine for the mandible, for both genders. Conclusions: Landmarks evaluated in this study showed dental arch differences between genders. This information enables making orthodontic lingual archwires that are more compatible with the anatomical forms and sizes of the maxilla and mandible. The findings also allowed the creation of a template for an anatomic lingual metallic archwire form to be used in the lingual technique.
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 26 (3) , e2119234
Open Access3D technology to measure dental arches and create a template for lingual brackets technique
Objective: This study aims at identifying anatomical dimensions of dental arches, based on landmarks currently used in the lingual orthodontic technique, and create an archwire form template to be used in orthodontic clinics. Methods: Maxillary and mandibular dental casts of 140 Caucasian individuals with natural and normal occlusion were digitized (3D), and the images were analyzed with Delcam Power ShapeTM 2010 software. The dental arch shapes and sizes were obtained from 14 landmarks selected on the lingual surface of the teeth. Points and segments defined by the software were used to create an archwire form template. Results: Various dental arch patterns were found for both maxilla and mandible. The smallest sizes were found in females, and the largest were found in male subjects. Six categories were defined for each gender, three for the maxilla and three for the mandible (Small, Medium and Large). A template was created with eighteen anatomic lingual archwire designs, nine for the maxilla and nine for the mandible, for both genders. Conclusions: Landmarks evaluated in this study showed dental arch differences between genders. This information enables making orthodontic lingual archwires that are more compatible with the anatomical forms and sizes of the maxilla and mandible. The findings also allowed the creation of a template for an anatomic lingual metallic archwire form to be used in the lingual technique.
- 1 September 2020
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology (Versão em Português)
- Vol. 86 (5) , 647-653
The impact of positive airway pressure on midface growth: a literature review
- 1 September 2020
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology (Versão em Português)
- Vol. 86 (5) , 647-653
The impact of positive airway pressure on midface growth: a literature review
- Open Access
- 15 June 2020
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology
- Vol. 86 (5) , 647-653
The impact of positive airway pressure on midface growth: a literature review
- 15 June 2020
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology
- Vol. 86 (5) , 647-653
Open AccessThe impact of positive airway pressure on midface growth: a literature review
- Open Access
- 21 September 2017
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Bioscience Journal
- Vol. 33 (5) , 1389-1400
Facial pattern analysis: critic review and collection of facial proportions in a brazilian sample using cone-beam computed tomography
The classification of facial vertical patterns is a common practice among dentists of different specialties. It influences treatment planning and expected outcomes, but is usually carried out qualitatively. The aim of this study is to better understand vertical facial proportions, combining a critic review of the literature with the collection of data from 100 Brazilian adult sample in search of 3D quantitative parameters with the use of Cone-Beam Computed Tomography (CBCT) measurements. In Pubmed database, the following quoted phrases were used: "Facial pattern" AND "Facial Index" AND "Facial height Index" AND "Facial height" AND "Dolichofacial" AND "Brachyfacial" AND "Long-face syndrome" AND "Short-face syndrome" in a 25 years interval (1990-2015). Study selection was performed searching for crucial facial features, commonly used to determine the facial pattern of a patient. In CBCT exams, 100 patients had facial features measured and classified by the three most reliable methods. The literature on the field can be very confusing, as the methods, landmarks and averages differed considerably. Most of the facial features researched had different values when the literature was analyzed and compared to our data. This indicates that ethnic, age and gender variations play an important whole in facial pattern diagnostic and should be taken in account when using general cephalometric approaches on diagnosis. With a group sorting method, combining the ratios between the anterior Facial height and the width, the anterior vertical proportion and the gonial angle divergence, and with anatomical landmarks we successfully correlated the sample to the qualitative description, as shorter faced patients to larger bi-zygomatic distances and less divergent gonial angles and longer faced patients with narrower and more divergent faces.
- 21 September 2017
- Published by Portal de Periódicos UFU - Universidade Federal de Uberlandia in Bioscience Journal
- Vol. 33 (5) , 1389-1400
Open AccessFacial pattern analysis: critic review and collection of facial proportions in a brazilian sample using cone-beam computed tomography
The classification of facial vertical patterns is a common practice among dentists of different specialties. It influences treatment planning and expected outcomes, but is usually carried out qualitatively. The aim of this study is to better understand vertical facial proportions, combining a critic review of the literature with the collection of data from 100 Brazilian adult sample in search of 3D quantitative parameters with the use of Cone-Beam Computed Tomography (CBCT) measurements. In Pubmed database, the following quoted phrases were used: "Facial pattern" AND "Facial Index" AND "Facial height Index" AND "Facial height" AND "Dolichofacial" AND "Brachyfacial" AND "Long-face syndrome" AND "Short-face syndrome" in a 25 years interval (1990-2015). Study selection was performed searching for crucial facial features, commonly used to determine the facial pattern of a patient. In CBCT exams, 100 patients had facial features measured and classified by the three most reliable methods. The literature on the field can be very confusing, as the methods, landmarks and averages differed considerably. Most of the facial features researched had different values when the literature was analyzed and compared to our data. This indicates that ethnic, age and gender variations play an important whole in facial pattern diagnostic and should be taken in account when using general cephalometric approaches on diagnosis. With a group sorting method, combining the ratios between the anterior Facial height and the width, the anterior vertical proportion and the gonial angle divergence, and with anatomical landmarks we successfully correlated the sample to the qualitative description, as shorter faced patients to larger bi-zygomatic distances and less divergent gonial angles and longer faced patients with narrower and more divergent faces.
- Open Access
- 1 August 2017
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 22 (4) , 61-69
Skeletal effects of RME in the transverse and vertical dimensions of the nasal cavity in mouth-breathing growing children
Introduction: Maxillary constriction is a dentoskeletal deformity characterized by discrepancy in maxilla/mandible relationship in the transverse plane, which may be associated with respiratory dysfunction. Objective: The objective of this study was to evaluate the skeletal effects of RME on maxillary and nasal transverse dimensions and compare the differences between males and females. Methods: Sixty-one mouth-breathers patients with skeletal maxillary constriction (35 males and 26 females, mean age 9.6 years) were included in the study. Posteroanterior (PA) radiographs were taken before expansion (T1) and 3 months after expansion (T2). Data obtained from the evaluation of T1 and T2 cephalograms were tested for normality with the Kolmogorov-Smirnov method. The Student’s t-test was performed for each measurement to determine sex differences. Results: RME produced a significant increase in all linear measurements of maxillary and nasal transverse dimensions. Conclusions: No significant differences were associated regarding sex. The RME produced significant width increases in the maxilla and nasal cavity, which are important for treatment stability, improving respiratory function and craniofacial development.
- 1 August 2017
- Published by FapUNIFESP (SciELO) in Dental Press Journal of Orthodontics
- Vol. 22 (4) , 61-69
Open AccessSkeletal effects of RME in the transverse and vertical dimensions of the nasal cavity in mouth-breathing growing children
Introduction: Maxillary constriction is a dentoskeletal deformity characterized by discrepancy in maxilla/mandible relationship in the transverse plane, which may be associated with respiratory dysfunction. Objective: The objective of this study was to evaluate the skeletal effects of RME on maxillary and nasal transverse dimensions and compare the differences between males and females. Methods: Sixty-one mouth-breathers patients with skeletal maxillary constriction (35 males and 26 females, mean age 9.6 years) were included in the study. Posteroanterior (PA) radiographs were taken before expansion (T1) and 3 months after expansion (T2). Data obtained from the evaluation of T1 and T2 cephalograms were tested for normality with the Kolmogorov-Smirnov method. The Student’s t-test was performed for each measurement to determine sex differences. Results: RME produced a significant increase in all linear measurements of maxillary and nasal transverse dimensions. Conclusions: No significant differences were associated regarding sex. The RME produced significant width increases in the maxilla and nasal cavity, which are important for treatment stability, improving respiratory function and craniofacial development.
- Open Access
- 26 June 2017
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology
- Vol. 84 (4) , 478-485
Short-term evaluation of tegumentary changes of the nose in oral breathers undergoing rapid maxillary expansion
- 26 June 2017
- Published by Elsevier in Brazilian Journal of Otorhinolaryngology
- Vol. 84 (4) , 478-485
Open AccessShort-term evaluation of tegumentary changes of the nose in oral breathers undergoing rapid maxillary expansion