SBSidhartha Bhowmick

Sidhartha Bhowmick

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Sidhartha Bhowmick has a total of 16 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative Analysis of Unsteady Natural Convection and Thermal Performance in Rectangular and Square Cavities Filled with Stratified Air

    by Syed Mehedi Hassan Shaon, Mahafujur Rahaman, Suvash C. Saha, Sidhartha Bhowmick

    A comprehensive numerical analysis has been conducted to investigate unsteady natural convection (UNC), bifurcation behavior, and heat transfer (HT) in a rectangular enclosure containing thermally stratified air. The enclosure comprises a uniformly heated bottom wall, thermally stratified vertical sidewalls, and a cooled top wall. To assess thermal performance, square and rectangular cavities with identical boundary conditions and working fluid are considered. The finite volume method (FVM) is used to solve the governing equations over a wide range of Rayleigh numbers (Ra = 101 to 109) for air with a Prandtl number (Pr) of 0.71. Flow dynamics and thermal performance are analyzed using temperature time series (TTS), limit point–limit cycle behavior, average Nusselt number (Nuavg), average entropy generation (Savg), average Bejan number (Beavg), and the ecological coefficient of performance (ECOP). In the rectangular cavity, the transition from steady to chaotic flow exhibits three bifurcations: a pitchfork bifurcation at Ra = 3 × 104–4 × 104, a Hopf bifurcation at Ra = 3 × 106–4 × 106, and the onset of chaotic flow at Ra = 9 × 107–2 × 108. The comparative analysis indicates that Nuavg remains nearly identical for both cavities within Ra = 105 to 107. However, at Ra = 108, the HT rate in the rectangular cavity is 29.84% higher than that of the square cavity, while Savg and Beavg differ by 39.32% and 37.50%, respectively. Despite higher HT and Savg in the rectangular enclosure, the square cavity demonstrates superior overall thermal performance by 13.52% at Ra = 108. These results offer significant insights for optimizing cavity geometries in thermal system design based on energy efficiency and entropy considerations.


  • Open Access

    Unsteady Natural Convection and Entropy Generation in Thermally Stratified Trapezoidal Cavities: A Comparative Study

    by Mahafujur Rahaman, Sidhartha Bhowmick, Suvash C. Saha

    This study numerically investigates unsteady natural convection (NC) heat transfer (HT) and entropy generation (Egen) in trapezoidal cavities filled with two thermally stratified fluids. Both air-filled and water-filled configurations are analyzed to evaluate and compare their thermal performance under varying conditions. The cavities are characterized by a heated base, thermally stratified sloped walls, and a cooled top wall. The governing equations are numerically solved using the finite volume (FV) approach. The study considers a Prandtl number (Pr) of 0.71 for air and 7.01 for water, Rayleigh numbers (Ra) ranging from 103 to 5 × 107, and an aspect ratio (AR) of 0.5. Flow behavior is examined through various parameters, including temperature time series (TTS), average Nusselt number (Nu), average entropy generation (Eavg), average Bejan number (Beavg), and ecological coefficient of performance (ECOP). Three bifurcations are identified during the transition from steady to chaotic flow for both fluids. The first is a pitchfork bifurcation, occurring between Ra = 105 and 2 × 105 for air, and between Ra = 9 × 104 and 105 for water. The second, a Hopf bifurcation, is observed between Ra = 4.7 × 105 and 4.8 × 105 for air, and between Ra = 105 and 2 × 105 for water. The third bifurcation marks the onset of chaotic flow, occurring between Ra = 3 × 107 and 4 × 107 for air, and between Ra = 4 × 105 and 5 × 105 for water. At Ra = 106, the average HT in the air-filled cavity is 85.35% higher than in the water-filled cavity, while Eavg is 94.54% greater in the air-filled cavity compared to water-filled cavity. At Ra = 106, the thermal performance of the cavity filled with water is 4.96% better than that of the air-filled cavity. These findings provide valuable insights for optimizing thermal systems using trapezoidal cavities and varying working fluids.


  • Open Access

    Thermal Performance and Entropy Generation of Unsteady Natural Convection in a Trapezoid-Shaped Cavity

    by Mahafujur Rahaman, Sidhartha Bhowmick, Suvash C. Saha

    In this study, a numerical investigation of unsteady natural convection heat transfer (HT) and entropy generation (EG) is performed within a trapezoid-shaped cavity containing thermally stratified water. The cavity’s bottom wall is heated, the sloped walls are thermally stratified, and the top wall is cooled. The finite volume (FV) method is employed to solve the governing equations. This study uses a Prandtl number (Pr) of 7.01 for water, an aspect ratio (AR) of 0.5, and Rayleigh numbers (Ra) varying between 10 and 106. To examine the flow behavior within the cavity, various relevant parameters are determined for different Ra values. These parameters include streamline and isotherm contours, temperature time series, limit point and limit cycle analysis, average Nusselt number (Nu) at the heated walls, average entropy generation (Eavg), and average Bejan number (Beavg). It is found that the flow transitions from a steady symmetrical state to a chaotic state as the Ra value increases. During this transition, three bifurcations occur. The first is a pitchfork bifurcation between Rayleigh numbers of 9 × 104 and 105, followed by a Hopf bifurcation between Rayleigh numbers of 105 and 2 × 105. Finally, another bifurcation occurs, shifting the flow from periodic to chaotic between Rayleigh numbers of 4 × 105 and 5 × 105. The present study shows an increase in Eavg of 94.97% between Rayleigh numbers of 103 and 106, while the rate of increase in Nu is 81.13%. The findings from this study will enhance understanding of the fluid flow phenomena in a trapezoid-shaped cavity filled with stratified water. The current numerical results are compared and validated against previously published numerical and experimental data.


  • Open Access

    Natural Convection Fluid Flow and Heat Transfer in a Valley-Shaped Cavity

    by Sidhartha Bhowmick, Laxmi Rani Roy, Feng Xu, Suvash C. Saha

    The phenomenon of natural convection is the subject of significant research interest due to its widespread occurrence in both natural and industrial contexts. This study focuses on investigating natural convection phenomena within triangular enclosures, specifically emphasizing a valley-shaped configuration. Our research comprehensively analyses unsteady, non-dimensional time-varying convection resulting from natural fluid flow within a valley-shaped cavity, where the inclined walls serve as hot surfaces and the top wall functions as a cold surface. We explore unsteady natural convection flows in this cavity, utilizing air as the operating fluid, considering a range of Rayleigh numbers from Ra = 100 to 108. Additionally, various non-dimensional times τ, spanning from 0 to 5000, are examined, with a fixed Prandtl number (Pr = 0.71) and aspect ratio (A = 0.5). Employing a two-dimensional framework for numerical analysis, our study focuses on identifying unstable flow mechanisms characterized by different non-dimensional times, including symmetric, asymmetric, and unsteady flow patterns. The numerical results reveal that natural convection flows remain steady in the symmetric state for Rayleigh values ranging from 100 to 7 × 103. Asymmetric flow occurs when the Ra surpasses 7 × 103. Under the asymmetric condition, flow arrives in an unsteady stage before stabilizing at the fully formed stage for 7 × 103 < Ra < 107. This study demonstrates that periodic unsteady flows shift into chaotic situations during the transitional stage before transferring to periodic behavior in the developed stage, but the chaotic flow remains predominant in the unsteady regime with larger Rayleigh numbers. Furthermore, we present an analysis of heat transfer within the cavity, discussing and quantifying its dependence on the Rayleigh number.


  • Transient natural convection flows and heat transfer in a thermally stratified air-filled trapezoidal cavity

    by Mahafujur Rahaman, Sidhartha Bhowmick, Bishnu Pada Ghosh, Feng Xu, Rabindra Nath Mondal, Suvash C. Saha


  • Open Access

    A Computational Study of Chaotic Flow and Heat Transfer within a Trapezoidal Cavity

    by Mahafujur Rahaman, Sidhartha Bhowmick, Rabindra Nath Mondal, Suvash C. Saha

    Numerical findings of natural convection flows in a trapezoidal cavity are reported in this study. This study focuses on the shift from symmetric steady to chaotic flow within the cavity. This cavity has a heated bottom wall, a cooled top wall, and adiabatic inclined sidewalls. The unsteady natural convection flows occurring within the cavity are numerically simulated using the finite volume (FV) method. The fluid used in the study is air, and the calculations are performed for different dimensionless parameters, including the Prandtl number (Pr), which is kept constant at 0.71, while varying the Rayleigh numbers (Ra) from 100 to 108 and using a fixed aspect ratio (AR) of 0.5. This study focuses on the effect of the Rayleigh numbers on the transition to chaos. In the transition to chaos, a number of bifurcations occur. The first primary transition is found from the steady symmetric to the steady asymmetric stage, known as a pitchfork bifurcation. The second leading transition is found from a steady asymmetric to an unsteady periodic stage, known as Hopf bifurcation. Another prominent bifurcation happens on the changeover of the unsteady flow from the periodic to the chaotic stage. The attractor bifurcates from a stable fixed point to a limit cycle for the Rayleigh numbers between 4 × 106 and 5 × 106. A spectral analysis and the largest Lyapunov exponents are analyzed to investigate the natural convection flows during the shift from periodic to chaos. Moreover, the cavity’s heat transfers are computed for various regimes. The cavity’s flow phenomena are measured and verified.


  • GPU-optimized LBM-MRT simulation of free convection and entropy generation of non-Newtonian power-law nanofluids in a porous enclosure at REV scale

    by Mashnoon Islam, Farhad Hasan, Sidhartha Bhowmick, Kamrujjaman, Mamun Molla

    The present research investigates the heat transfer and entropy generation of a non-Newtonian power-law Cu-water nanofluid in a square porous enclosure at a representative elementary volume (REV) scale using the multiple-relaxation-time lattice Boltzmann method (MRT-LBM). The Graphics Processing Unit (GPU) accelerated the computations involved. The Brinkman-Forchheimer-extended Darcy model and the shear rate dependent power-law viscosity model were taken into account to characterize the non-Newtonian fluid flow in porous medium. Three types of model validations have been conducted, followed by the mandatory grid independence test, to demonstrate the precision and accuracy of the computational code. The numerical results were obtained by varying five key parameters namely, Darcy number (Da=10-3, 10-2, 10-1); power-law index (n = 0.6 to 1.0); Rayleigh number (Ra=104, 105, 106); porosity parameter (ϵ = 0.6); volume fraction of nanoparticles (ϕ =0.0 to 0.05), and the Darcy Rayleigh number (Ram=100, 1000). The numerically simulated outcomes were presented in terms of streamlines, isotherms, velocity, and temperature profiles as well as the Nusselt (Nu) numbers. Furthermore, a correlation among the parameters to determine the average Nu was developed using the Levenberg-Marquardt (LM) algorithm. The mathematical correlation was also subject to validations, and, in general, good correlation coefficients were obtained. Finally, a comprehensive analysis has been included to record the total entropy production. It was found that the shear-thinning fluid (n < 1) exhibited the maximum heat transfer under the homogeneous porous condition, which effectively enhanced the total entropy generation. However, the local maxima of Nu were found to be greater for nanofluids. In addition, the inclusion of ϕ restricted the fluid mobility leading to reduction in velocity. Meanwhile, the increasing Da number typically reduces the entropy generation, but the rate of plummeting was found to be directly influenced by n and Ra numbers. The findings of this study through numerical code within the GPU environment would be beneficial for the thermal industrial applications where robust analysis and modeling are required within a small time-scale, particularly in ambient energy and aerospace industries.


  • Open Access

    Unsteady Natural Convection in an Initially Stratified Air-Filled Trapezoidal Enclosure Heated from Below

    by Mahafujur Rahaman, Sidhartha Bhowmick, Rabindra Nath Mondal, Suvash C. Saha

    Natural convection is intensively explored, especially in a valley-shaped trapezoidal enclosure, because of its broad presence in both technical settings and nature. This study deals with a trapezoidal cavity, which is initially filled with linearly stratified air. Although the sidewalls remain adiabatic, the bottom wall is heated, and the top wall is cooled. For the stratified fluid (air), the temperature of the fluid adjacent to the top and the bottom walls is the same as that of the walls. Natural convection in the trapezoidal cavity is simulated in two dimensions using numerical simulations, by varying Rayleigh numbers (Ra) from 100 to 108 with constant Prandtl number, Pr = 0.71, and aspect ratio, A = 0.5. The numerical results demonstrate that the development of natural convection from the beginning is dependent on the Rayleigh numbers. According to numerical results, the development of transient flow within the enclosure owing to the predefined conditions for the boundary may be categorized into three distinct stages: early, transitional, and steady or unsteady. The flow characteristics at each of the three phases and the impact of the Rayleigh number on the flow’s growth are quantified. Unsteady natural convection flows in the enclosure are described and validated by numerical results. In addition, heat transfer through the bottom and the top surfaces is described in this study.


  • Open Access

    Unsteady Natural Convection in An Initially Stratified Air-filled Trapezoidal Enclosure Heated from below

    by Mahafujur Rahman, Sidhartha Bhowmick, Rabindra Nath Mondal, Suvash Chandra Saha

    Natural convection is intensively explored, especially in a valley-shaped trapezoidal enclosure, because of its broad presence in both technical settings and nature. This study deals with a trapezoidal cavity, which is initially filled with linearly stratified air. Though the side walls remain adiabatic, the bottom wall is heated, and the top wall is cooled. For the stratified fluid (air), the temperature of the fluid adjacent to the top and the bottom walls is the same as that of the walls. Natural convection in the trapezoidal cavity is simulated in two dimensions using numerical simulations, by varying Rayleigh numbers (Ra) from 100 to 108 with constant Prandtl number, Pr = 0.71, and aspect ratio, A = 0.5. According to numerical results, the development of transient flow within the enclosure owing to the predefined conditions for boundary may be categorized into three distinct stages: early, transitional, and steady or unsteady. The flow characteristics at each of the three phases and the impact of the Rayleigh number on the flow’s growth are stated in this study. In addition, heat transfer through the bottom and the top surfaces is described in this study.