SGSam Green

Sam Green

*This is an algorithmically generated author record based on publicly available information.

Sam Green has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Correcting density/sonic logs for total organic carbon to reduce uncertainty in pore pressure prediction

    by Sam Green, Lev Vernik

    Pore pressure prediction in shales undergoing compaction, including both mechanical and chemical processes, is customarily related to the mechanism referred to disequilibrium compaction. However, even when this mechanism is established and the normal compaction trend in sonic velocity, as a proxy for shale porosity, is well constrained, the pore pressure prediction may be in error because of the lithological variation in shale composition. The presence of solid organic matter in excess amounts in shale formations that have never been exposed to the pressure–temperature conditions in the oil window is an example of these lithological effects, causing marked overprediction of pore pressure even in thermally immature mudrocks. This necessitates implementation of bulk density and sonic velocity log corrections in organic‐rich shales prior to performing standard pore pressure prediction workflows. In this paper, it is shown how these corrections can be made and the outcomes of the pore pressure prediction can be dramatically improved by using combination of rock physics models relating bulk density to total organic carbon and P‐wave velocity to bulk density in organic‐rich and conventional shales, respectively. To illustrate the workflow, a case study from a well drilled through the Kimmeridge Clay Formation in the North Sea, a well‐recognized source rock with total organic carbon content in the 2%–12% range and significant variation in clay content from 25% to 60%, both of which strongly affect the most commonly utilized log responses recorded in this formation. Using this old but data‐rich well, the importance of accounting for both total organic carbon and clay content variations in pore pressure prediction is demonstrated. It is also recognized that this workflow does not immediately apply to unconventional shale plays, where the pore pressure generation mechanisms are more complex and cannot be solely ascribed to compaction disequilibrium.


  • The Mam Tor Creeping Landslide

    by Sam Green, Ernest Rutter, Christine Arkwright


  • An integrated deep learning solution for petrophysics, pore pressure, and geomechanics property prediction

    by Ehsan Zabihi Naeini, Sam Green, Iestyn Russell-Hughes, Marianne Rauch-Davies

    In unconventional plays, wells are drilled at an unprecedented rate. This, together with technical challenges in terms of complex stratigraphy, multiple play types, variable rock properties, and various elements of pore pressure, geomechanics, fracturing, and diagenesis, calls for more sophisticated, faster, consistent, and wider ranging analytical tools. Given the scale of the work — i.e., the number of wells — performing classical workflows for petrophysics, pore pressure, and geomechanics prediction can be impractical (if not impossible) due to turnaround considerations. Also such workflows might not use any preexisting regional studies efficiently. In principle, a machine learning approach can mitigate these shortcomings. We show that a supervised deep neural network approach can be an alternative innovative tool for petrophysical, pore pressure, and geomechanics analysis enabling the use of all the previously interpreted data to devise solutions that simultaneously integrate wide-ranging wellbore and wireline logs. Beyond that, a similar approach is taken to predict a certain number of attributes solely from seismically derived properties, which allows one to compute volumetric models. The application of such an algorithm is shown on a Permian case study in which the automatic neural-network-based algorithms achieve reasonable accuracy in a fraction of the time.


  • Seismic-based derisking of unconventional plays by integrating rock physics, inversion, geopressure, and geomechanics

    by Sam Green, Jeremy Meyer, Marianne Rauch-Davies, Steve Smith, Bob Schmicker

    Pore pressure is a critical input to a geomechanical model and impacts the mechanical stability of a well. It is also desirable to map the high pressure areas before drilling decisions are made as wells that intersect these zones are typically more prolific producers. A well-based workflow was developed that was able to predict the recorded pore pressure and then calibrate a geomechanical model which matched the wellbore measurements. This model was then tested on wells with the requisite log dataset and was able to replicate the observed mechanical wellbore behavior, highlighting the accuracy of the pore pressure prediction. The resultant models were then applied to a high resolution 3D seismic inversion encompassing key elastic properties and facies prediction to produce a 3D understanding of the distribution of pressure and stress. Presentation Date: Monday, October 15, 2018 Start Time: 1:50:00 PM Location: 206A (Anaheim Convention Center) Presentation Type: Oral


  • A hydrodynamic model and associated spill-point map for the Huntington Field, UK Central North Sea

    by Sam Green, Stephen O'Connor, Richard Swarbrick, Kester Waters

    The Huntington Field is located in Block UK 22/14b in the UK Central North Sea. The reservoir is the Tertiary Forties Formation (a deep-sea fan interval), which has been produced since 2013. Pre-production well data indicate that hydrocarbons (oil) are present outside structural closure as recorded by direct pressure data and wireline-derived fluid contacts, and indicated by seismic attribute data. These observations in other parts of the world (e.g. Mad Dog Field, Miocene Gulf of Mexico) have been attributed to the presence of a hydrodynamic reservoir. This paper aims to reconcile these observations from seismic data, logs and pressure data with competing models to explain the hydrocarbon distribution. Combining the interpretations above with the additional observations that (a) there are no sedimentological barriers or identifiable faulting between wells, (b) the surrounding fields (Everest and Forties) have been actively producing for decades, but that calculated flow rates in the Huntington Field agree with published data for other virgin hydrodynamic systems, and (c) measured regional and local overpressure gradients indicate fluid flow to the NW where hydrocarbons are present outside the structure indicates that a hydrodynamic model is the most probable solution to explain the fluids and their present distribution.


  • The Importance of Recognizing Hydrodynamics for Understanding Reservoir Volumetrics, Field Development and Well Placement

    by Sam Green, Richard E. Swarbrick, Stephen A. O'COnnor

    Hydrodynamically active reservoirs have been recognized in various parts of the world. The majority of these are termed "conventional", following the nomenclature presented in Swarbrick (2009), whereby fluid flow is driven by hydraulic head. More recently "unconventional" hydrodynamic reservoirs have been recognized where fluid flow is driven by lateral drainage, typically found in laterally extensive reservoirs. The lateral drainage of pressure in reservoir sand units leads to a pressure gradient from higher pressured non-reservoir sediments (shales) above and below into the reservoir, leading to a focus of fluids, including hydrocarbons, within the reservoir. Within a laterally extensive reservoir fill and spill up-dip is likely to dominate the trapping of hydrocarbons, which is typically assisted by hydrodynamic flow as the aquifer will drain up-dip. Hence, secondary migration along extensive sand units is a highly effective carrier system, with little/no potential for vertical migration of hydrocarbons since there are higher pressures above and below. Hydrocarbon column heights can extend above the limits imposed by capillary entry pressures on account of the higher water pressures in the sealing rocks relative to the aquifer pressures in the sands. Such reservoirs are present in the Miocene of the Gulf of Mexico and there are multiple sources of evidence for active "unconventional" hydrodynamics which are summarized within this paper. Furthermore, new data is presented that indicates the deeper Lower Tertiary Wilcox play is hydrodynamically active by combining direct pressure data interpretation with the geological depositional model.


  • Understanding potential pressure regimes in undrilled Labrador deep water by use of global analogues

    by S. Green, S. A. O'COnnor, A. P. Edwards, J. E. Carter, D. E. L. Cameron, R. Wright

    In recent years, new deepwater seismic-based exploration work has resulted in the revision of existing basin boundaries and identification of new, potentially oil-bearing basins in the deepwater Labrador region. The petroleum potential in this deepwater area has also been encouraged by the identification of slick and seepage locations using 2D seismic data and satellite imagery. The importance is that surface slicks possibly are related to subsurface hydrocarbon migration. Thus, all recent data collated together show strong evidence for an active petroleum system in deep water. Many of the wells in shallow water have been drilled with low mud weights, suggestive of low pore pressures. However, where thick shale packages are present, significant overpressure is observed by significant kicks. Clearly, there is a close association between thick (and deep) shale packages and high pore pressure. Thus, one of the key risks in developing the deepwater potential is to understand the pressure regime. The success of this approach has been highlighted recently by successful discoveries such as the presalt Lulu field onshore Brazil and associated discoveries in Gabon and Angola and postsalt discoveries that include Jubilee field offshore Ghana and the associated discovery of Zaedyus field in French Guiana. The deepwater Vøring Basin of the Mid-Norway North Sea and the Labrador slope and deep water share a similar passive margin setting to each other, similar facies associations, and structural development.


  • What is the impact of geopressure on unconventional plays?

    by Stephen O'Connor, Sam Green, Alexander Edwards


  • Quantifying creep behaviour of clay-bearing rocks below the critical stress state for rapid failure: Mam Tor landslide, Derbyshire, England

    by E.H. Rutter, S. Green

    The Mam Tor landslide (Derbyshire, England) slips downhill at up to 0.5 m a −1 , and offers an excellent opportunity to study time-dependent creep in mudstones under in situ conditions. Annual surveys show that creep rates increase following heavy rainfall, but to establish detailed correlation between creep and pore water pressure required spatially and temporally higher resolution monitoring. We acquired 3 years of such data, at 3 h intervals, from wire creep meters, borehole piezometers and rainfall monitoring, showing that creep is strongly focused into the winter months and correlates well with pore water pressure. Summer grass and fern growth strongly influence rainfall infiltration, recycling much of the rainfall back to the atmosphere, explaining the seasonal variability of creep. The dependence of creep rate on pore pressure can be recast as a rheological model relating shear strain rate to shear stress using the friction angle for the creeping mudstone to link effective normal stress to shear stress. The creep is very non-linear, following a power law with a stress exponent of 48. This flow law may apply also to shear failure in poorly consolidated mudrocks under high pore pressure conditions; for example, within some landslides, subglacial sediments, tectonic fault zones, tectonic mélanges and accretionary complexes.