Abderrahmane Seddjar
Abderrahmane Seddjar has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Kamel Djamel Eddine Kerrouche
School of Automation on Science and Electrical Engineering, Beihang University, Haidian District, Beijing 100191, Xueyuan Road 37, China; Satellite Development Center CDS, P. O. B. 4065, 31000 Ibn Rochd USTO, Oran, Algeria
4 shared publications - Lina Wang
School of Automation Science and Electrical Engineering, Beihang University, Beijing, China
4 shared publications - Messaoud Bensaada
Department of Space Instrumentation Research, Satellites Development Center, Algerian Space Agency, Oran, Algeria
2 shared publications Pedro Henrique de Oliveira Nogueira
Astroscale
2 shared publications- Abdelkader Aoudeche
Centre d'Exploitation des Services de Télécom, Agence Spatiale Algerienne, Alger, Algeria
1 shared publication - Arezki Faiza1 shared publication
Latest Publications
- 25 October 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aerospace Information Systems
- p. 1-12
Fuzzy-Based Energy Management Strategy for Nanosatellites: From Concept to Hardware Implementation
Energy management (EM) is a critical factor in enhancing the efficiency and extending the lifespan of Nanosatellite missions. This study introduces an advanced Nanosatellite Power Distribution Strategy based on efficient EM using intelligent Fuzzy-based control to maximize task performance. A novel State of Charge (SoC) prediction model is integrated, optimizing charge and discharge cycles to extend battery lifespan. A Fuzzy decision-making is developed to regulate discharge rates and depth of discharge, preserving battery health while maintaining mission tasks. Simulation experiments demonstrate the effectiveness of the proposed EM approach in representative mission scenarios based on Automatic Identification System (AIS) for tracking and fire detection. Additionally, Processor-in-the-Loop (PIL) validation using the Atmel SAM3X8E ARM Cortex-M3 microcontroller confirms the controller’s practical applicability. These advancements provide a robust foundation for offline optimization of Nanosatellite energy management, supporting reliable and sustainable mission operations.
- 25 October 2026
- Published by American Institute of Aeronautics and Astronautics (AIAA) in Journal of Aerospace Information Systems
- p. 1-12
Fuzzy-Based Energy Management Strategy for Nanosatellites: From Concept to Hardware Implementation
Energy management (EM) is a critical factor in enhancing the efficiency and extending the lifespan of Nanosatellite missions. This study introduces an advanced Nanosatellite Power Distribution Strategy based on efficient EM using intelligent Fuzzy-based control to maximize task performance. A novel State of Charge (SoC) prediction model is integrated, optimizing charge and discharge cycles to extend battery lifespan. A Fuzzy decision-making is developed to regulate discharge rates and depth of discharge, preserving battery health while maintaining mission tasks. Simulation experiments demonstrate the effectiveness of the proposed EM approach in representative mission scenarios based on Automatic Identification System (AIS) for tracking and fire detection. Additionally, Processor-in-the-Loop (PIL) validation using the Atmel SAM3X8E ARM Cortex-M3 microcontroller confirms the controller’s practical applicability. These advancements provide a robust foundation for offline optimization of Nanosatellite energy management, supporting reliable and sustainable mission operations.
- Open Access
- 4 October 2025
- Published by Elsevier in Energy Reports
- Vol. 14, 2951-2976
Innovative power system architectures for nanosatellites using high-efficiency converters and robust battery charge regulation strategy
- 4 October 2025
- Published by Elsevier in Energy Reports
- Vol. 14, 2951-2976
Open AccessInnovative power system architectures for nanosatellites using high-efficiency converters and robust battery charge regulation strategy
- Open Access
- 1 January 2024
- Published by Wiley in International Journal of Energy Research
- Vol. 2024 (1)
Comprehensive Analysis and Design of Electrical Power Systems for Nanosatellite Platforms: A Focus on Robust MPPT Control Using Sliding Mode Control Method
This paper is aimed at performing a comprehensive review of the approaches employed in nanosatellite platforms, specifically 1 U and 3 U, for electrical power systems (EPS). Moreover, it seeks to develop a robust maximum power point tracking (MPPT) controller using the sliding mode control (SMC) method. The proposed control strategy is intended to monitor the solar panel’s maximum power point (MPP) and adapt to changes in temperatures and solar irradiance in low Earth orbit (LEO). The EPS model, designed with the proposed sizing method, is built in MATLAB‐Simulink and integrates a solar panel, battery storage, and power converters controlled by diverse MPPT methods. Then, simulation results demonstrate the effectiveness of the proposed SMC approach compared to other conventional control methods for the designed EPS under varying LEO conditions. To achieve a robust validation of the most appropriate MPPT control method under steady‐state conditions, this paper presents an experimental investigation into the proposed EPS hardware design. The proposed SMC method achieved an increase in power generation from 10% to 12% for buck and boost power converters, respectively, compared to traditional control methods.
- 1 January 2024
- Published by Wiley in International Journal of Energy Research
- Vol. 2024 (1)
Open AccessComprehensive Analysis and Design of Electrical Power Systems for Nanosatellite Platforms: A Focus on Robust MPPT Control Using Sliding Mode Control Method
This paper is aimed at performing a comprehensive review of the approaches employed in nanosatellite platforms, specifically 1 U and 3 U, for electrical power systems (EPS). Moreover, it seeks to develop a robust maximum power point tracking (MPPT) controller using the sliding mode control (SMC) method. The proposed control strategy is intended to monitor the solar panel’s maximum power point (MPP) and adapt to changes in temperatures and solar irradiance in low Earth orbit (LEO). The EPS model, designed with the proposed sizing method, is built in MATLAB‐Simulink and integrates a solar panel, battery storage, and power converters controlled by diverse MPPT methods. Then, simulation results demonstrate the effectiveness of the proposed SMC approach compared to other conventional control methods for the designed EPS under varying LEO conditions. To achieve a robust validation of the most appropriate MPPT control method under steady‐state conditions, this paper presents an experimental investigation into the proposed EPS hardware design. The proposed SMC method achieved an increase in power generation from 10% to 12% for buck and boost power converters, respectively, compared to traditional control methods.
- Open Access
Applications of Nanosatellites in Constellation: Overview and Feasibility Study for a Space Mission Based on Internet of Space Things Applications Used for AIS and Fire Detection
In some geographically challenging areas (such as deserts, seas, and forests) where direct connectivity to a terrestrial network is difficult, space communication is the only option. In these remote locations, Internet of Space Things (IoST) applications can also be used successfully. In this paper, the proposed payload for IoST applications demonstrates how an Automatic Identification System (AIS) and a fire detection system can be used effectively. A space mission based on efficient and low-cost communication can use a constellation of nanosatellites to better meet this need. These two applications, which use a constellation of nanosatellites, can provide relevant university-level data in several countries as an effective policy for the transfer of space technology in an educational initiative project. To enhance educational participation and interest in space technology, this paper shares the lessons learned from the project feasibility study based on an in-depth design of a nanosatellite with several analyses (data budget, link budget, power budget, and lifetime estimation). Lastly, this paper highlights by experiments the development and application of a cost-effective sensor node for fire detection and the use of GPS to enable AIS capabilities in the IoST framework.
Open AccessApplications of Nanosatellites in Constellation: Overview and Feasibility Study for a Space Mission Based on Internet of Space Things Applications Used for AIS and Fire Detection
In some geographically challenging areas (such as deserts, seas, and forests) where direct connectivity to a terrestrial network is difficult, space communication is the only option. In these remote locations, Internet of Space Things (IoST) applications can also be used successfully. In this paper, the proposed payload for IoST applications demonstrates how an Automatic Identification System (AIS) and a fire detection system can be used effectively. A space mission based on efficient and low-cost communication can use a constellation of nanosatellites to better meet this need. These two applications, which use a constellation of nanosatellites, can provide relevant university-level data in several countries as an effective policy for the transfer of space technology in an educational initiative project. To enhance educational participation and interest in space technology, this paper shares the lessons learned from the project feasibility study based on an in-depth design of a nanosatellite with several analyses (data budget, link budget, power budget, and lifetime estimation). Lastly, this paper highlights by experiments the development and application of a cost-effective sensor node for fire detection and the use of GPS to enable AIS capabilities in the IoST framework.
- Open Access
- 25 April 2022
- Published by Taylor & Francis in Automatika
- Vol. 63 (4) , 695-717
CubeSat project: experience gained and design methodology adopted for a low-cost Electrical Power System
This paper focuses on experimented space projects run by universities, offering an effective design process to improve learning methods in space engineering. The approach used for the design of CubeSat Electrical Power System (EPS) will go through estimations, sizing, simulations, PCB design and end with an experimental test procedure for design validation. The main design criteria presented in this paper are low costs and effective reliability. To meet the first criterion, the Commercial-Off-The-Shelf (COTS) components are used during the design, which has become an effective path to put experimental payloads in orbit for minimal cost. In the second criterion, the function of some critical EPS components was replicated, such as circuits used for power maximization and battery charge regulation, by following a suitable algorithm embedded in MCU and hot/cold redundant analog integrated circuits. However, the choice was made on the state of the art of CubeSat components already tested. This approach of working will help new space engineers to think about optimal solutions for the design of the appropriate EPS for a CubeSat university project achievable on a limited budget. Finally, the necessary experiments of the designed EPS were carried out and the results were illustrated in the context below.
- 25 April 2022
- Published by Taylor & Francis in Automatika
- Vol. 63 (4) , 695-717
Open AccessCubeSat project: experience gained and design methodology adopted for a low-cost Electrical Power System
This paper focuses on experimented space projects run by universities, offering an effective design process to improve learning methods in space engineering. The approach used for the design of CubeSat Electrical Power System (EPS) will go through estimations, sizing, simulations, PCB design and end with an experimental test procedure for design validation. The main design criteria presented in this paper are low costs and effective reliability. To meet the first criterion, the Commercial-Off-The-Shelf (COTS) components are used during the design, which has become an effective path to put experimental payloads in orbit for minimal cost. In the second criterion, the function of some critical EPS components was replicated, such as circuits used for power maximization and battery charge regulation, by following a suitable algorithm embedded in MCU and hot/cold redundant analog integrated circuits. However, the choice was made on the state of the art of CubeSat components already tested. This approach of working will help new space engineers to think about optimal solutions for the design of the appropriate EPS for a CubeSat university project achievable on a limited budget. Finally, the necessary experiments of the designed EPS were carried out and the results were illustrated in the context below.
- 31 January 2015
- Published by Praise Worthy Prize in International Review of Automatic Control (IREACO)
- Vol. 8 (1) , 63
A Fuzzy Approach for a Hybrid Multi-Mobile Robot Control Architecture to Maintain a Specific Formation During Navigation
A Fuzzy Approach for a Hybrid Multi-Mobile Robot Control Architecture to Maintain a Specific Formation During Navigation
- 31 January 2015
- Published by Praise Worthy Prize in International Review of Automatic Control (IREACO)
- Vol. 8 (1) , 63
A Fuzzy Approach for a Hybrid Multi-Mobile Robot Control Architecture to Maintain a Specific Formation During Navigation
A Fuzzy Approach for a Hybrid Multi-Mobile Robot Control Architecture to Maintain a Specific Formation During Navigation