Shuangzan Lu
Shuangzan Lu has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Chendong Zhang
School of Physics and Technology, Wuhan University, Wuhan, China
5 shared publications Jun Liu
5 shared publications- Jinghao Deng
School of Physics and Technology, Wuhan University, Wuhan, China
4 shared publications Hao Ying
3 shared publicationsJiajie Pan
3 shared publicationsQinmin Guo
Wuhan Institute of Physics and Mathematics, Wuhan, CHINA
3 shared publications
Latest Publications
- Open Access
- 18 August 2026
- Published by Elsevier in SSRN Electronic Journal
Plasma-Enhanced Atomic Layer Deposition of Molybdenum Thin Films with High Purity, Superior Uniformity, and Low Resistivity Using MoO₂Cl₂ as a Precursor
Semiconductor device scaling urgently requires high-performance metallic films with high purity, low resistivity, and superior step coverage. Molybdenum (Mo) has emerged as a promising alternative to traditional tungsten and copper interconnects, benefiting from its low resistivity, short electron mean free path, and excellent thermal stability. Herein, a plasma-enhanced atomic layer deposition (PEALD) method is proposed to fabricate high-quality Mo thin films using MoO₂Cl₂ as the precursor and hydrogen plasma as the reducing medium. The optimized process enables seed-layer-free Mo growth at 0.286 Å/cycle, simplifying fabrication workflows and reducing production costs. The resultant Mo films achieve a low resistivity below 9 μΩ·cm, approaching the intrinsic bulk value, and deliver over 90% step coverage in 12:1 high-aspect-ratio trenches. This scalable PEALD strategy provides a feasible solution for batch manufacturing of high-performance Mo conductive films for advanced logic circuits and 3D NAND flash devices.
- 18 August 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessPlasma-Enhanced Atomic Layer Deposition of Molybdenum Thin Films with High Purity, Superior Uniformity, and Low Resistivity Using MoO₂Cl₂ as a Precursor
Semiconductor device scaling urgently requires high-performance metallic films with high purity, low resistivity, and superior step coverage. Molybdenum (Mo) has emerged as a promising alternative to traditional tungsten and copper interconnects, benefiting from its low resistivity, short electron mean free path, and excellent thermal stability. Herein, a plasma-enhanced atomic layer deposition (PEALD) method is proposed to fabricate high-quality Mo thin films using MoO₂Cl₂ as the precursor and hydrogen plasma as the reducing medium. The optimized process enables seed-layer-free Mo growth at 0.286 Å/cycle, simplifying fabrication workflows and reducing production costs. The resultant Mo films achieve a low resistivity below 9 μΩ·cm, approaching the intrinsic bulk value, and deliver over 90% step coverage in 12:1 high-aspect-ratio trenches. This scalable PEALD strategy provides a feasible solution for batch manufacturing of high-performance Mo conductive films for advanced logic circuits and 3D NAND flash devices.
- Open Access
- 9 July 2026
- Published by Elsevier in SSRN Electronic Journal
Mitigation of substrate miscut angle contradiction for monolithic SiC/GaN integration via optimized AlGaN/GaN HEMT epitaxy on 4H-SiC substrates
Monolithic integration of GaN high-electron-mobility transistors (HEMTs) with SiC JFETs offers a transformative solution for high-performance power electronics, as exemplified by the GaN/SiC hybrid field-effect transistor (HyFET). However, this integration is hindered by a fundamental mismatch in substrate requirement: SiC homoepitaxy relies on off-axis substrates for stable polytype growth, whereas GaN heteroepitaxy conventionally requires on-axis substrates. Herein, we report an optimized epitaxial strategy to address this challenge, enabling high-quality AlGaN/GaN HEMT heterostructures to be grown on off-cut 4H-SiC substrates. Via sequential process optimization, we identify three key governing parameters: low growth pressure for the unintentionally doped (UID) GaN buffer layer, high V/III ratio for the AlGaN barrier, and low V/III ratio for the AlN spacer. These parameters collectively enable smooth epitaxial surfaces and high-performance two-dimensional electron gas (2DEG) channels. The optimized heterostructure on 4° off-cut SiC exhibits a record-low sheet resistance of 452 Ω/sq with root-mean-square roughness (Ra) of 0.96 nm. When transferred to a 2° off-cut substrate, the same recipe delivers an ultra-smooth surface with 0.52 nm roughness and excellent wafer uniformity. This work provides a practical pathway to mitigate interfacial defects and improve material quality for SiC/GaN heterostructures, laying a foundation for next-generation power and radio-frequency (RF) devices.
- 9 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessMitigation of substrate miscut angle contradiction for monolithic SiC/GaN integration via optimized AlGaN/GaN HEMT epitaxy on 4H-SiC substrates
Monolithic integration of GaN high-electron-mobility transistors (HEMTs) with SiC JFETs offers a transformative solution for high-performance power electronics, as exemplified by the GaN/SiC hybrid field-effect transistor (HyFET). However, this integration is hindered by a fundamental mismatch in substrate requirement: SiC homoepitaxy relies on off-axis substrates for stable polytype growth, whereas GaN heteroepitaxy conventionally requires on-axis substrates. Herein, we report an optimized epitaxial strategy to address this challenge, enabling high-quality AlGaN/GaN HEMT heterostructures to be grown on off-cut 4H-SiC substrates. Via sequential process optimization, we identify three key governing parameters: low growth pressure for the unintentionally doped (UID) GaN buffer layer, high V/III ratio for the AlGaN barrier, and low V/III ratio for the AlN spacer. These parameters collectively enable smooth epitaxial surfaces and high-performance two-dimensional electron gas (2DEG) channels. The optimized heterostructure on 4° off-cut SiC exhibits a record-low sheet resistance of 452 Ω/sq with root-mean-square roughness (Ra) of 0.96 nm. When transferred to a 2° off-cut substrate, the same recipe delivers an ultra-smooth surface with 0.52 nm roughness and excellent wafer uniformity. This work provides a practical pathway to mitigate interfacial defects and improve material quality for SiC/GaN heterostructures, laying a foundation for next-generation power and radio-frequency (RF) devices.
- 17 April 2026
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 210
Low-resistance ohmic contacts on AlGaN/GaN HEMTs via MBE regrown n+-GaN
- 17 April 2026
- Published by Elsevier in Materials Science in Semiconductor Processing
- Vol. 210
Low-resistance ohmic contacts on AlGaN/GaN HEMTs via MBE regrown n+-GaN
- Open Access
- 23 February 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (8)
A microscopic understanding of the magnetism in Fe3GeTe2 with mono-atomic vacancies
Fe3GeTe2 (FGT) is a promising two-dimensional van der Waals magnet known for its metallic conductivity and relatively high Curie temperature (Tc). Structural defects, particularly mono-atomic vacancies, are inevitably introduced in FGT during material fabrication and have been observed to significantly modulate Tc and coercivity. However, the underlying mechanisms of these modifications require systematic exploration. In this work, by first-principles calculations, we investigate the effect of various mono-atomic vacancies on the magnetic properties of FGT. We find that magnetic anisotropy is reduced by all kinds of vacancies by a local density approximation method, and the main reason is the diminished contributions from Te atoms, which possess strong spin–orbital coupling. Furthermore, by examining the vacancy-induced changes in the magnetic exchange coupling (MEC), a deeper understanding of magnetism in FGT can be achieved. For instance, the enhanced MEC among the Fe1up–Fe1up pair by Te vacancies confirms the competition between superexchange coupling and Ruderman–Kittel–Kasuya–Yosida interactions. These insights are instrumental for guiding future applications of FGT.
- 23 February 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 139 (8)
Open AccessA microscopic understanding of the magnetism in Fe3GeTe2 with mono-atomic vacancies
Fe3GeTe2 (FGT) is a promising two-dimensional van der Waals magnet known for its metallic conductivity and relatively high Curie temperature (Tc). Structural defects, particularly mono-atomic vacancies, are inevitably introduced in FGT during material fabrication and have been observed to significantly modulate Tc and coercivity. However, the underlying mechanisms of these modifications require systematic exploration. In this work, by first-principles calculations, we investigate the effect of various mono-atomic vacancies on the magnetic properties of FGT. We find that magnetic anisotropy is reduced by all kinds of vacancies by a local density approximation method, and the main reason is the diminished contributions from Te atoms, which possess strong spin–orbital coupling. Furthermore, by examining the vacancy-induced changes in the magnetic exchange coupling (MEC), a deeper understanding of magnetism in FGT can be achieved. For instance, the enhanced MEC among the Fe1up–Fe1up pair by Te vacancies confirms the competition between superexchange coupling and Ruderman–Kittel–Kasuya–Yosida interactions. These insights are instrumental for guiding future applications of FGT.
- 7 May 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (19) , 11903-11911
Distinct Assembly Behaviors and Thermal Stabilities of Vanadyl Phthalocyanine on the Cu2Bi and Bi(110) Monolayers
Fabrication of well-organized molecular films on metallic monolayers is crucial for the development of molecular-based electronic and optoelectronic nanodevices. In this study, we investigated the assembly behaviors and thermal stabilities of vanadyl phthalocyanine (VOPc) on Cu2Bi and Bi(110) monolayers by using low-temperature scanning tunneling microscopy. The molecular configurations, orbitals, and thermal stability were elucidated at a submolecular level. On Cu2Bi, a VOPc single layer with the 4-fold symmetry was fabricated, exhibiting an O-down configuration that can be transformed into an O-up configuration through thermal annealing. Conversely, on the Bi(110) monolayer, a VOPc bilayer structure with a square-shaped unit cell formed, and annealing treatments resulted in the retention of a single layer characterized by a parallelogram-shaped unit cell along with two distinct molecular alignment orientations. Thermal stability assessments indicated that the O-up configuration was much more stable for both types of VOPc single layers supported by Cu2Bi and Bi(110) monolayers. Conductance spectra revealed that the VOPc single layer supported by Cu2Bi exhibited an orbital distribution similar to that of the VOPc bilayer fabricated on Bi(110). For both types of VOPc films, thermal annealing significantly reduced the energy gap width of VOPc molecules, possibly due to the enhanced molecule-substrate coupling or strengthened π-π intermolecular interactions. This study would contribute to a deeper understanding of assembly behaviors and stability during molecule-metal contacts, which are essential for fabricating high-speed molecule-based nanodevices.
- 7 May 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (19) , 11903-11911
Distinct Assembly Behaviors and Thermal Stabilities of Vanadyl Phthalocyanine on the Cu2Bi and Bi(110) Monolayers
Fabrication of well-organized molecular films on metallic monolayers is crucial for the development of molecular-based electronic and optoelectronic nanodevices. In this study, we investigated the assembly behaviors and thermal stabilities of vanadyl phthalocyanine (VOPc) on Cu2Bi and Bi(110) monolayers by using low-temperature scanning tunneling microscopy. The molecular configurations, orbitals, and thermal stability were elucidated at a submolecular level. On Cu2Bi, a VOPc single layer with the 4-fold symmetry was fabricated, exhibiting an O-down configuration that can be transformed into an O-up configuration through thermal annealing. Conversely, on the Bi(110) monolayer, a VOPc bilayer structure with a square-shaped unit cell formed, and annealing treatments resulted in the retention of a single layer characterized by a parallelogram-shaped unit cell along with two distinct molecular alignment orientations. Thermal stability assessments indicated that the O-up configuration was much more stable for both types of VOPc single layers supported by Cu2Bi and Bi(110) monolayers. Conductance spectra revealed that the VOPc single layer supported by Cu2Bi exhibited an orbital distribution similar to that of the VOPc bilayer fabricated on Bi(110). For both types of VOPc films, thermal annealing significantly reduced the energy gap width of VOPc molecules, possibly due to the enhanced molecule-substrate coupling or strengthened π-π intermolecular interactions. This study would contribute to a deeper understanding of assembly behaviors and stability during molecule-metal contacts, which are essential for fabricating high-speed molecule-based nanodevices.
- 5 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (22) , 8923-8930
Asymmetric Polaritons with Half-Hyperbolic Shaped Propagation
Traditional hyperbolic phonon polaritons (PhPs) possess intrinsic mirror and rotational symmetry, producing full-hyperbolic fields. Reducing material symmetry enables hyperbolic shear PhPs that break mirror symmetry for asymmetric transmission while maintaining rotational symmetry, yielding shear-hyperbolic fields due to viscous shear effects. Despite advancements, inherent symmetry limits highly directional propagation of polaritons. Here, we introduce a strategy for generating asymmetric polaritons with only a half-hyperbolic shape, thereby enhancing both hyperbolic patterning and unidirectional transmission. By exploiting the asymmetric edge of engineered gold nanopatterns, our method produces highly collimated, directional PhPs while effectively suppressing wave components in the undesired quadrants. We select hyperbolic α-MoO3 for both theoretical and experimental validation, confirming applicability to the library of natural materials like uniaxial hBN, biaxial V2O5, and monoclinic CdWO4. This technique to manipulate asymmetric directional polaritons not only facilitates planar nanophotonic applications but also broadens the scope for nanoscale optical manipulation.
- 5 May 2025
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 25 (22) , 8923-8930
Asymmetric Polaritons with Half-Hyperbolic Shaped Propagation
Traditional hyperbolic phonon polaritons (PhPs) possess intrinsic mirror and rotational symmetry, producing full-hyperbolic fields. Reducing material symmetry enables hyperbolic shear PhPs that break mirror symmetry for asymmetric transmission while maintaining rotational symmetry, yielding shear-hyperbolic fields due to viscous shear effects. Despite advancements, inherent symmetry limits highly directional propagation of polaritons. Here, we introduce a strategy for generating asymmetric polaritons with only a half-hyperbolic shape, thereby enhancing both hyperbolic patterning and unidirectional transmission. By exploiting the asymmetric edge of engineered gold nanopatterns, our method produces highly collimated, directional PhPs while effectively suppressing wave components in the undesired quadrants. We select hyperbolic α-MoO3 for both theoretical and experimental validation, confirming applicability to the library of natural materials like uniaxial hBN, biaxial V2O5, and monoclinic CdWO4. This technique to manipulate asymmetric directional polaritons not only facilitates planar nanophotonic applications but also broadens the scope for nanoscale optical manipulation.
- 1 April 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 162 (13)
Tuning configurations and orbitals of vanadyl phthalocyanine on transition metals via surface alloy effect
Fabrication of well-ordered molecular films and further tuning their structural and electronic properties is crucial in enhancing the performance of the on-based organic devices. Herein, by high-resolution scanning tunneling microscopy and density functional theory calculation, we demonstrate the on-surface fabrication of well-organized vanadyl phthalocyanine (VOPc) membranes with diverse characteristics on the binary alloy monolayer. The molecular configurations, structures, and orbitals are clearly clarified in the submolecular level. On Ag2Sb/Ag(111), the VOPc membrane exhibits the fourfold symmetric unit cell comprising one centered and four cornered O-up molecules with two distinct stacking orientations. On the contrary, on Cu2Sb/Cu(111), all VOPc molecules adopt the O-down configuration and uniform orientations. The tunneling conductance spectra unveil a semiconductor signature but with different occupied orbitals for both VOPc membranes. These contrasting features are resulted from the diverse molecule–substrate interaction relating to the different charge transfer of alloy surfaces. Our study may open up a new route for modifying the structures and electronic states of the molecular films by applying surface alloy effects.
- 1 April 2025
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 162 (13)
Tuning configurations and orbitals of vanadyl phthalocyanine on transition metals via surface alloy effect
Fabrication of well-ordered molecular films and further tuning their structural and electronic properties is crucial in enhancing the performance of the on-based organic devices. Herein, by high-resolution scanning tunneling microscopy and density functional theory calculation, we demonstrate the on-surface fabrication of well-organized vanadyl phthalocyanine (VOPc) membranes with diverse characteristics on the binary alloy monolayer. The molecular configurations, structures, and orbitals are clearly clarified in the submolecular level. On Ag2Sb/Ag(111), the VOPc membrane exhibits the fourfold symmetric unit cell comprising one centered and four cornered O-up molecules with two distinct stacking orientations. On the contrary, on Cu2Sb/Cu(111), all VOPc molecules adopt the O-down configuration and uniform orientations. The tunneling conductance spectra unveil a semiconductor signature but with different occupied orbitals for both VOPc membranes. These contrasting features are resulted from the diverse molecule–substrate interaction relating to the different charge transfer of alloy surfaces. Our study may open up a new route for modifying the structures and electronic states of the molecular films by applying surface alloy effects.
- Open Access
- 7 March 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (10) , eado6538
Evidence of ferroelectricity in an antiferromagnetic vanadium trichloride monolayer
A reduced dimensionality of multiferroic materials is highly desired for device miniaturization, but the coexistence of ferroelectricity and magnetism at the two-dimensional limit is yet to be conclusively demonstrated. Here, we used a NbSe 2 substrate to break both the C 3 rotational and inversion symmetries in monolayer VCl 3 and, thus, introduced exceptional in-plane ferroelectricity into a two-dimensional magnet. Scanning tunneling spectroscopy directly visualized ferroelectric domains and manipulated their domain boundaries in monolayer VCl 3 , where coexisting antiferromagnetic order with canted magnetic moments was verified by vibrating sample magnetometer measurements. Our density functional theory calculations highlight the crucial role that highly directional interfacial Cl-Se interactions play in breaking the symmetries and, thus, in introducing in-plane ferroelectricity, which was further verified by examining an ML-VCl 3 /graphene sample. Our work demonstrates an approach to manipulate the ferroelectric states in monolayered magnets through van der Waals interfacial interactions.
- 7 March 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (10) , eado6538
Open AccessEvidence of ferroelectricity in an antiferromagnetic vanadium trichloride monolayer
A reduced dimensionality of multiferroic materials is highly desired for device miniaturization, but the coexistence of ferroelectricity and magnetism at the two-dimensional limit is yet to be conclusively demonstrated. Here, we used a NbSe 2 substrate to break both the C 3 rotational and inversion symmetries in monolayer VCl 3 and, thus, introduced exceptional in-plane ferroelectricity into a two-dimensional magnet. Scanning tunneling spectroscopy directly visualized ferroelectric domains and manipulated their domain boundaries in monolayer VCl 3 , where coexisting antiferromagnetic order with canted magnetic moments was verified by vibrating sample magnetometer measurements. Our density functional theory calculations highlight the crucial role that highly directional interfacial Cl-Se interactions play in breaking the symmetries and, thus, in introducing in-plane ferroelectricity, which was further verified by examining an ML-VCl 3 /graphene sample. Our work demonstrates an approach to manipulate the ferroelectric states in monolayered magnets through van der Waals interfacial interactions.