John Howard Jackson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
John Howard Jackson has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Michael Heighes
Idaho National Laboratory (INL), Idaho Falls, ID (United States)
2 shared publications Peter L Andresen
Andresen Consulting, Bakersfield, CA (United States)
2 shared publicationsA. Korinek
McMaster University
1 shared publicationA. S. Kobayashi
1 shared publication- Abdalla Abou-Jaoude
Idaho National Laboratory
1 shared publication - Abderrafi. M. Ougouag
Idaho National Laboratory
1 shared publication
Latest Publications
- Open Access
- 5 November 2026
- Published by Taylor & Francis in Nuclear Science and Engineering
- p. 1-42
Overview of Microreactor Technical Challenges and Opportunities
I. Microreactors, as implied by their name, are small in physical size and are intended to generate power at a much lower rating than large gigawatt-scale reactors. A uniform definition of the term...
- 5 November 2026
- Published by Taylor & Francis in Nuclear Science and Engineering
- p. 1-42
Open AccessOverview of Microreactor Technical Challenges and Opportunities
I. Microreactors, as implied by their name, are small in physical size and are intended to generate power at a much lower rating than large gigawatt-scale reactors. A uniform definition of the term...
- Open Access
- 14 March 2025
- Published by Office of Scientific and Technical Information (OSTI)
Microreactor Program Technology Maturation MACS system reports
This submission contains several reports associated with the DOE Microreactor Program Technology Maturation MACS system. These include milestone reports: M3AT-24IN0804031-Optimized MACS architecture M3AT-24IN0804033-Light and temp sensor integration M4AT-23IN0804055-Update Microreactor Automated Control System (MACS) hardware based on input from demonstration M2AT-23IN0804054-Demonstrate actuation of control system using Microreactor Automated Control System (MACS)
- 14 March 2025
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessMicroreactor Program Technology Maturation MACS system reports
This submission contains several reports associated with the DOE Microreactor Program Technology Maturation MACS system. These include milestone reports: M3AT-24IN0804031-Optimized MACS architecture M3AT-24IN0804033-Light and temp sensor integration M4AT-23IN0804055-Update Microreactor Automated Control System (MACS) hardware based on input from demonstration M2AT-23IN0804054-Demonstrate actuation of control system using Microreactor Automated Control System (MACS)
- Open Access
- 3 October 2023
- Published by Office of Scientific and Technical Information (OSTI)
MARVEL Reactor Structure (MRS)
MARVEL plans to be the first new operational reactor at INL in many years. These documents are being made publicly available to disseminate key information on the MARVEL reactor for private sector use towards reactor development.
- 3 October 2023
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessMARVEL Reactor Structure (MRS)
MARVEL plans to be the first new operational reactor at INL in many years. These documents are being made publicly available to disseminate key information on the MARVEL reactor for private sector use towards reactor development.
- Open Access
- 3 October 2023
- Published by Office of Scientific and Technical Information (OSTI)
MARVEL Fuel and CoreSystem (FCS)
MARVEL plans to be the first new operational reactor at INL in many years. These documents are being made publicly available to disseminate key information on the MARVEL reactor for private sector use towards reactor development.
- 3 October 2023
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessMARVEL Fuel and CoreSystem (FCS)
MARVEL plans to be the first new operational reactor at INL in many years. These documents are being made publicly available to disseminate key information on the MARVEL reactor for private sector use towards reactor development.
- Open Access
- 3 October 2023
- Published by Office of Scientific and Technical Information (OSTI)
MARVEL Reactivity Control System (RCS)
MARVEL plans to be the first new operational reactor at INL in many years. These documents are being made publicly available to disseminate key information on the MARVEL reactor for private sector use towards reactor development.
- 3 October 2023
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessMARVEL Reactivity Control System (RCS)
MARVEL plans to be the first new operational reactor at INL in many years. These documents are being made publicly available to disseminate key information on the MARVEL reactor for private sector use towards reactor development.
- Open Access
- 3 October 2023
- Published by Office of Scientific and Technical Information (OSTI)
MARVEL Instrumentation and Control System (ICS)
MARVEL plans to be the first new operational reactor at INL in many years. These documents are being made publicly available to disseminate key information on the MARVEL reactor for private sector use towards reactor development.
- 3 October 2023
- Published by Office of Scientific and Technical Information (OSTI)
Open AccessMARVEL Instrumentation and Control System (ICS)
MARVEL plans to be the first new operational reactor at INL in many years. These documents are being made publicly available to disseminate key information on the MARVEL reactor for private sector use towards reactor development.
- Open Access
- 9 January 2023
- Published by Taylor & Francis in Nuclear Technology
- Vol. 209 (sup1) , III-V
Foreword: Special issue on the U.S. Department of Energy Microreactor Program
With pleasure, we introduce this Nuclear Technology special issue, which focuses on the U.S. Department of Energy, Office of Nuclear Energy (DOE-NE) Microreactor Program and associated research and...
- 9 January 2023
- Published by Taylor & Francis in Nuclear Technology
- Vol. 209 (sup1) , III-V
Open AccessForeword: Special issue on the U.S. Department of Energy Microreactor Program
With pleasure, we introduce this Nuclear Technology special issue, which focuses on the U.S. Department of Energy, Office of Nuclear Energy (DOE-NE) Microreactor Program and associated research and...
- 27 July 2020
- Published by Office of Scientific and Technical Information (OSTI)
Irradiation and PIE of alloys X-750 and XM-19 (EPRI Phase III)
The Nuclear Science User Facilities (NSUF) based at Idaho National Laboratory (INL), along with the Electric Power Research Institute (EPRI), formed an agreement to test representative alloys used as reactor structural materials as a pilot program to establish guidelines for future NSUF research programs. This report contains results from the portion of this program established as Phase III (of three phases), entailing irradiation and post-irradiation examination of select alloys typical of boiling water reactor (BWR) internal structural materials. Phases I and II are the subject of separate reports and represent baseline material test results and irradiation experiment design, respectively. The intent of this Phase III research program is to determine properties for the materials of interest after being irradiated at the Advanced Test Reactor (ATR) to three different target fast (E>1MeV) fluences: 5.0 x 10^19 n/cm^2, 2.0 x 10^20 n/cm^2, and 1.0 x 10^21 n/cm^2. These correspond to irradiation damage levels (displacements per atom [dpa]) of approximately 0.08, 0.30, and 1.4 dpa, which represent comparable levels to (a) a previous study which looked at X-750 irradiated to ~1 x 10^19 n/cm^2, comparable to the lowest fluence; (b) approximately a medium level of fluence for BWR components; and (c) extended lifemore » (60 – 80 years) for BWR components. The materials chosen for this research are the nickel-based alloy X-750 and austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co., and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research Center (GE-GRC), and parts were provided to INL for use in this pilot project. « less
- 27 July 2020
- Published by Office of Scientific and Technical Information (OSTI)
Irradiation and PIE of alloys X-750 and XM-19 (EPRI Phase III)
The Nuclear Science User Facilities (NSUF) based at Idaho National Laboratory (INL), along with the Electric Power Research Institute (EPRI), formed an agreement to test representative alloys used as reactor structural materials as a pilot program to establish guidelines for future NSUF research programs. This report contains results from the portion of this program established as Phase III (of three phases), entailing irradiation and post-irradiation examination of select alloys typical of boiling water reactor (BWR) internal structural materials. Phases I and II are the subject of separate reports and represent baseline material test results and irradiation experiment design, respectively. The intent of this Phase III research program is to determine properties for the materials of interest after being irradiated at the Advanced Test Reactor (ATR) to three different target fast (E>1MeV) fluences: 5.0 x 10^19 n/cm^2, 2.0 x 10^20 n/cm^2, and 1.0 x 10^21 n/cm^2. These correspond to irradiation damage levels (displacements per atom [dpa]) of approximately 0.08, 0.30, and 1.4 dpa, which represent comparable levels to (a) a previous study which looked at X-750 irradiated to ~1 x 10^19 n/cm^2, comparable to the lowest fluence; (b) approximately a medium level of fluence for BWR components; and (c) extended lifemore » (60 – 80 years) for BWR components. The materials chosen for this research are the nickel-based alloy X-750 and austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co., and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research Center (GE-GRC), and parts were provided to INL for use in this pilot project. « less
- 28 May 2020
- Published by Office of Scientific and Technical Information (OSTI)
Irradiation and PIE of alloys X-750 and XM-19 (EPRI Phase III)
The Nuclear Science User Facilities (NSUF) based at Idaho National Laboratory (INL), along with the Electric Power Research Institute (EPRI), formed an agreement to test representative alloys used as reactor structural materials as a pilot program to establish guidelines for future NSUF research programs. This report contains results from the portion of this program established as Phase III (of three phases), entailing irradiation and post-irradiation examination of select alloys typical of boiling water reactor (BWR) internal structural materials. Phases I and II are the subject of separate reports and represent baseline material test results and irradiation experiment design, respectively. The intent of this Phase III research program is to determine properties for the materials of interest after being irradiated at the Advanced Test Reactor (ATR) to three different target fast (E>1MeV) fluences: 5.0 x 10^19 n/cm^2, 2.0 x 10^20 n/cm^2, and 1.0 x 10^21 n/cm^2. These correspond to irradiation damage levels (displacements per atom [dpa]) of approximately 0.08, 0.30, and 1.4 dpa, which represent comparable levels to (a) a previous study which looked at X-750 irradiated to ~1 x 10^19 n/cm^2, comparable to the lowest fluence; (b) approximately a medium level of fluence for BWR components; and (c) extended lifemore » (60 – 80 years) for BWR components. The materials chosen for this research are the nickel-based alloy X-750 and austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co., and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research Center (GE-GRC), and parts were provided to INL for use in this pilot project. « less
- 28 May 2020
- Published by Office of Scientific and Technical Information (OSTI)
Irradiation and PIE of alloys X-750 and XM-19 (EPRI Phase III)
The Nuclear Science User Facilities (NSUF) based at Idaho National Laboratory (INL), along with the Electric Power Research Institute (EPRI), formed an agreement to test representative alloys used as reactor structural materials as a pilot program to establish guidelines for future NSUF research programs. This report contains results from the portion of this program established as Phase III (of three phases), entailing irradiation and post-irradiation examination of select alloys typical of boiling water reactor (BWR) internal structural materials. Phases I and II are the subject of separate reports and represent baseline material test results and irradiation experiment design, respectively. The intent of this Phase III research program is to determine properties for the materials of interest after being irradiated at the Advanced Test Reactor (ATR) to three different target fast (E>1MeV) fluences: 5.0 x 10^19 n/cm^2, 2.0 x 10^20 n/cm^2, and 1.0 x 10^21 n/cm^2. These correspond to irradiation damage levels (displacements per atom [dpa]) of approximately 0.08, 0.30, and 1.4 dpa, which represent comparable levels to (a) a previous study which looked at X-750 irradiated to ~1 x 10^19 n/cm^2, comparable to the lowest fluence; (b) approximately a medium level of fluence for BWR components; and (c) extended lifemore » (60 – 80 years) for BWR components. The materials chosen for this research are the nickel-based alloy X-750 and austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co., and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research Center (GE-GRC), and parts were provided to INL for use in this pilot project. « less
- 7 October 2017
- Published by Springer Nature in The Minerals, Metals & Materials Series
- p. 727-741
High Resolution Transmission Electron Microscopy of Irradiation Damage in Inconel X-750
- 7 October 2017
- Published by Springer Nature in The Minerals, Metals & Materials Series
- p. 727-741
High Resolution Transmission Electron Microscopy of Irradiation Damage in Inconel X-750