Marco Antonio Marques Marinho
Marco Antonio Marques Marinho has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Joao Paulo Carvalho Lustosa da Costa
Department 2, Hamm-Lippstadt University of Applied Sciences (HSHL), Lippstadt, Germany
17 shared publications - Edison Pignaton de Freitas
Informatics Institute, Federal University of Rio Grande Do Sul, Porto Alegre, Brazil
14 shared publications - Felix Antreich
Department of Telecommunications, Aeronautics Institute of Technology (ITA), São José dos Campos, Brazil
7 shared publications - Rafael Timóteo de SousaJr
Department of Electrical Engineering, University of Brasilia, Federal District, Brasilia 70910-900, Brazil
7 shared publications Alexey Vinel
4 shared publications- Andre Lima Ferrer de Almeida
Federal University of Ceará
4 shared publications
Latest Publications
- Open Access
- 9 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 110073-110081
Spherical Wave Array Based Positioning for Vehicular Scenarios
Smart vehicles are emerging as a possible solution for multiple concerns in road traffic, such as mobility and safety. This work presents radio localization methods based on simultaneous direction of arrival (DOA), time-delay, and range estimation using the SAGE algorithm. The proposed methods do not rely on external sources of information, such as global navigation satellite systems (GNSS). The proposed methods take advantage of signals of opportunity and do not require the transmission of location-specific signals; therefore, they do not increase the network load. A set of simulations using synthetic and measured data is provided to validate the proposed methods, and the results show that it is possible to achieve accuracy down to decimeter and centimeter-level.
- 9 June 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 110073-110081
Open AccessSpherical Wave Array Based Positioning for Vehicular Scenarios
Smart vehicles are emerging as a possible solution for multiple concerns in road traffic, such as mobility and safety. This work presents radio localization methods based on simultaneous direction of arrival (DOA), time-delay, and range estimation using the SAGE algorithm. The proposed methods do not rely on external sources of information, such as global navigation satellite systems (GNSS). The proposed methods take advantage of signals of opportunity and do not require the transmission of location-specific signals; therefore, they do not increase the network load. A set of simulations using synthetic and measured data is provided to validate the proposed methods, and the results show that it is possible to achieve accuracy down to decimeter and centimeter-level.
- Open Access
- 1 March 2018
- Published by Elsevier in Signal Processing
- Vol. 144, 19-28
Robust Nonlinear Array Interpolation for Direction of Arrival Estimation of Highly Correlated Signals
- 1 March 2018
- Published by Elsevier in Signal Processing
- Vol. 144, 19-28
Open AccessRobust Nonlinear Array Interpolation for Direction of Arrival Estimation of Highly Correlated Signals
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 142-146
Antenna Array Based Localization Scheme for Vehicular Networks
Vehicular ad hoc networks (VANETs) are emerging as the possible solution for multiple concerns in road traffic such as mobility and safety. One of the main concerns present in VANETs is the localization and tracking of vehicles. This work presents a passive vehicle localization and tracking method based on direction of arrival (DOA) estimation. The proposed method does not rely on external sources of information such as Global Navigation Satellite Systems (GNSS) and can be used to mitigate the possibility of spoofing or to provide a second independent source of position estimation for integrity purposes. The proposed algorithm uses array signal processing techniques to estimate not only the position but also the direction of other vehicles in network. Furthermore, it is a fully passive method and can alleviate the network load since it does not require any location based data exchange and can be performed by any listening vehicle using the signal of any data transmission. A set of numerical simulations is used to validate the proposed method and the results are shown to be more precise than the average accuracy of Global Position System (GPS) receivers.
- 1 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 142-146
Antenna Array Based Localization Scheme for Vehicular Networks
Vehicular ad hoc networks (VANETs) are emerging as the possible solution for multiple concerns in road traffic such as mobility and safety. One of the main concerns present in VANETs is the localization and tracking of vehicles. This work presents a passive vehicle localization and tracking method based on direction of arrival (DOA) estimation. The proposed method does not rely on external sources of information such as Global Navigation Satellite Systems (GNSS) and can be used to mitigate the possibility of spoofing or to provide a second independent source of position estimation for integrity purposes. The proposed algorithm uses array signal processing techniques to estimate not only the position but also the direction of other vehicles in network. Furthermore, it is a fully passive method and can alleviate the network load since it does not require any location based data exchange and can be performed by any listening vehicle using the signal of any data transmission. A set of numerical simulations is used to validate the proposed method and the results are shown to be more precise than the average accuracy of Global Position System (GPS) receivers.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 666-669
Direction of arrival estimation performance for compact antenna arrays with adjustable size
The quest for compact antenna arrays able to perform robust beamforming and high resolution direction of arrival (DOA) estimation is pushing the antenna array dimensions to progressively shrink, with effects in terms of reduced performance not only for the antenna but also for beamforming and DOA estimation algorithms, for which their assumptions about the antenna properties do not hold anymore. This work shows the design and development of an antenna array with adjustable mutual distance between the single elements: such setup will allow to scientifically analyse the effects that progressive miniaturization, i.e. progressively smaller mutual distances between the antennas, have on the DOA estimation algorithms, as well as show the improvements obtained by using array interpolation methods, i.e. techniques able to create a virtual array response out of the actual array one, such as to comply with the algorithms' requirements on the antenna response.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 666-669
Direction of arrival estimation performance for compact antenna arrays with adjustable size
The quest for compact antenna arrays able to perform robust beamforming and high resolution direction of arrival (DOA) estimation is pushing the antenna array dimensions to progressively shrink, with effects in terms of reduced performance not only for the antenna but also for beamforming and DOA estimation algorithms, for which their assumptions about the antenna properties do not hold anymore. This work shows the design and development of an antenna array with adjustable mutual distance between the single elements: such setup will allow to scientifically analyse the effects that progressive miniaturization, i.e. progressively smaller mutual distances between the antennas, have on the DOA estimation algorithms, as well as show the improvements obtained by using array interpolation methods, i.e. techniques able to create a virtual array response out of the actual array one, such as to comply with the algorithms' requirements on the antenna response.
- 16 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 190-195
Adaptive communication and cooperative MIMO cluster formation for improved lifetime in wireless sensor networks
One of the main limitations that still keeps Wireless Sensor Networks (WSNs) from being adopted in a large scale is the limited energy supply, i.e. the lifetime of the nodes that constitute the network. The wireless communication between nodes is responsible for most of the energy consumed in WSNs. A promising method to improve the energy efficiency is the usage of a Cooperative Multiple Input Multiple Output (CO-MIMO) scheme, where nodes form clusters to transmit and receive signals using a virtual antenna array. This work presents a study on the energy consumption of multi-hop and single-hop transmission compared to CO-MIMO and how to select the most efficient method. It also proposes a method for adaptively choosing the number of nodes that form a CO-MIMO cluster in order to maximize the lifetime of the network and to avoid disconnections. The proposed method takes into account not only the total energy consumption but also the distribution of energy within the network, aiming to keep the energy distribution across the network as uniform as possible. The effects of the proposed methods in the total available energy of the network and in the distribution of the energy is presented by means of numerical simulations.
- 16 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 190-195
Adaptive communication and cooperative MIMO cluster formation for improved lifetime in wireless sensor networks
One of the main limitations that still keeps Wireless Sensor Networks (WSNs) from being adopted in a large scale is the limited energy supply, i.e. the lifetime of the nodes that constitute the network. The wireless communication between nodes is responsible for most of the energy consumed in WSNs. A promising method to improve the energy efficiency is the usage of a Cooperative Multiple Input Multiple Output (CO-MIMO) scheme, where nodes form clusters to transmit and receive signals using a virtual antenna array. This work presents a study on the energy consumption of multi-hop and single-hop transmission compared to CO-MIMO and how to select the most efficient method. It also proposes a method for adaptively choosing the number of nodes that form a CO-MIMO cluster in order to maximize the lifetime of the network and to avoid disconnections. The proposed method takes into account not only the total energy consumption but also the distribution of energy within the network, aiming to keep the energy distribution across the network as uniform as possible. The effects of the proposed methods in the total available energy of the network and in the distribution of the energy is presented by means of numerical simulations.
- 19 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Array interpolation based on multivariate adaptive regression splines
Many important signal processing techniques such as Spatial Smoothing, Forward Backward Averaging and Root-MUSIC, rely on antenna arrays with specific and precise structures. Arrays with such ideal structures, such as a centro-hermitian structure, are often hard to build in practice. Array interpolation is used to enable the usage of these techniques with imperfect (not having a centro-hermitian structure) arrays. Most interpolation methods rely on methods based on least squares (LS) to map the output of a perfect virtual array based on the real array. In this work, the usage of Multivariate Adaptive Regression Splines (MARS) is proposed instead of the traditional LS to interpolate arrays with responses largely different from the ideal.
- 19 September 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-5
Array interpolation based on multivariate adaptive regression splines
Many important signal processing techniques such as Spatial Smoothing, Forward Backward Averaging and Root-MUSIC, rely on antenna arrays with specific and precise structures. Arrays with such ideal structures, such as a centro-hermitian structure, are often hard to build in practice. Array interpolation is used to enable the usage of these techniques with imperfect (not having a centro-hermitian structure) arrays. Most interpolation methods rely on methods based on least squares (LS) to map the output of a perfect virtual array based on the real array. In this work, the usage of Multivariate Adaptive Regression Splines (MARS) is proposed instead of the traditional LS to interpolate arrays with responses largely different from the ideal.
- 13 August 2015
- Published by Springer Nature
- p. 309-318
A Practical Implementation of a Cooperative Antenna Array for Wireless Sensor Networks
- 13 August 2015
- Published by Springer Nature
- p. 309-318
A Practical Implementation of a Cooperative Antenna Array for Wireless Sensor Networks
- 1 April 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2819-2823
Unscented Transformation based array interpolation
It is impossible to enforce exact responses for each sensor involved in an antenna array. Important signal processing techniques such as Estimation of Signal Parameters via Rotational Invariance (ESPRIT), Forward Backward Average (FBA) and Spatial Smoothing (SPS) rely on sensor arrays with Vandermonde or centro-hermitian responses. To achieve such responses array interpolation is often necessary. In this work a novel way of performing array interpolation while minimizing the transformation error using the Unscented Transformation (UT) is presented. The UT provides a different method for mapping interpolated regions and also exhibits a new insight into array interpolation and its current limitations. A set of numerical simulations presents promising results for array interpolation employing the UT.
- 1 April 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 2819-2823
Unscented Transformation based array interpolation
It is impossible to enforce exact responses for each sensor involved in an antenna array. Important signal processing techniques such as Estimation of Signal Parameters via Rotational Invariance (ESPRIT), Forward Backward Average (FBA) and Spatial Smoothing (SPS) rely on sensor arrays with Vandermonde or centro-hermitian responses. To achieve such responses array interpolation is often necessary. In this work a novel way of performing array interpolation while minimizing the transformation error using the Unscented Transformation (UT) is presented. The UT provides a different method for mapping interpolated regions and also exhibits a new insight into array interpolation and its current limitations. A set of numerical simulations presents promising results for array interpolation employing the UT.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 333-337
Sensor Localization via Diversely Polarized Antennas
Wireless sensor networks (WSNs) are currently employed in a vast number of different applications ranging from home automation and health care to military systems. Although their application may vary greatly, WSNs share a common set of characteristics such as a limited energy supply and simple hardware. A common issue related with the application of WSNs is sensor localization, for some types of applications it is important that the sensors know the relative or absolute position of other sensors in the network, such as surveillance of monitoring networks. If sensors are randomly placed they may resort a wide range of methods such as Global Navigation Satellite Systems (GNSS) or received signal strength indicators (RSSI). In this work we present an alternative to relative sensor localization by employed a crossed dipole antenna in the reception and a known polarization in the transmission. The accuracy of the proposed methods is measured trough numerical simulations and results are presented.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 333-337
Sensor Localization via Diversely Polarized Antennas
Wireless sensor networks (WSNs) are currently employed in a vast number of different applications ranging from home automation and health care to military systems. Although their application may vary greatly, WSNs share a common set of characteristics such as a limited energy supply and simple hardware. A common issue related with the application of WSNs is sensor localization, for some types of applications it is important that the sensors know the relative or absolute position of other sensors in the network, such as surveillance of monitoring networks. If sensors are randomly placed they may resort a wide range of methods such as Global Navigation Satellite Systems (GNSS) or received signal strength indicators (RSSI). In this work we present an alternative to relative sensor localization by employed a crossed dipole antenna in the reception and a known polarization in the transmission. The accuracy of the proposed methods is measured trough numerical simulations and results are presented.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 310-315
Evaluation of Space-Time-Frequency (STF)-Coded MIMO-OFDM Systems in Realistic Channel Models
By taking into account several dimension of the transmitted signal, such as space, frequency, period and time, MIMO-OFDM systems allow an increased spectral efficiency and an improved identifiability in comparison to matrix solutions. In this paper, we evaluate MIMO-OFDM systems for geometric scenarios where the narrow band approximation is violated. To this end a new data model is proposed to better represent the behavior of the system in the presence of wide band signals. Moreover, we also relax the assumption that the amount of transmitted antennas is equal to the number of transmitted symbols.
- 1 May 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 310-315
Evaluation of Space-Time-Frequency (STF)-Coded MIMO-OFDM Systems in Realistic Channel Models
By taking into account several dimension of the transmitted signal, such as space, frequency, period and time, MIMO-OFDM systems allow an increased spectral efficiency and an improved identifiability in comparison to matrix solutions. In this paper, we evaluate MIMO-OFDM systems for geometric scenarios where the narrow band approximation is violated. To this end a new data model is proposed to better represent the behavior of the system in the presence of wide band signals. Moreover, we also relax the assumption that the amount of transmitted antennas is equal to the number of transmitted symbols.