Aleksey Zagorulko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Aleksey Zagorulko has a total of 114 co-authors. Here are the top co-authors by number of shared publications:
- Andrii Zahorulko
State Biotechnological University
36 shared publications - Kateryna Kasabova
Dmytro Motornyi Tavria State Agrotechnological University
15 shared publications - Valeriy Mikhaylov
State Biotechnological University
11 shared publications - Olena Shydakova-Kameniuka
State Biotechnological University
7 shared publications - Nataliia Tytarenko
State Biotechnological University
6 shared publications - Maryna Yancheva
State Biotechnological University
5 shared publications
Latest Publications
- Open Access
- 31 October 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 5 (3(91)) , 66-72
Extending the shelf life of pastila using multicomponent fruit and berry pastes
The object of research is a pastila with the replacement of 75% of apple puree with a fruit and berry paste based on apples, cranberries and hawthorn. One of the most problematic areas is the lack of research on the patterns of changes in the quality indicators of pastila with a paste based on apples, cranberries and hawthorn during storage. The relevance of the work is due to the need to expand the range of sugar confectionery products with a foamy structure, namely pastila, using fruit and berry raw materials and assessing their quality during storage. The research aimed to determine the nature of changes in the quality indicators of a pastila with a fruit and berry paste based on apples, cranberries and hawthorn compared to a control sample with apple puree, during storage for 40 days. It was found that the pastila with a multi-component fruit and berry paste lost moisture more slowly than the control: over 40 days the rate of its loss was 5.9% lower. The addition of paste also contributed to the slowdown in the increase in product strength. After 40 days, the strength of the pastila with paste increased by 10.0%, while the strength of the control – by 18.4%. The content of reducing substances and acidity during storage increased statistically insignificantly. After 40 days of storage, no bacteria of the E. coli group were detected in the samples. The number of mesophilic aerobic and facultative anaerobic microorganisms, yeasts and mold fungi did not exceed the maximum permissible levels. In the pastila with fruit and berry paste, the accumulation of microorganisms occurred more slowly than in the control sample. The average organoleptic score of the pastila with paste after 40 days was 4.83 points, which corresponded to the level of the control sample on the day of manufacture. The control score on day 40 decreased to 3.90 points. The results obtained justify the feasibility of extending the recommended shelf life of pastila using a multi-component fruit and berry paste based on apples, cranberries and hawthorn from 30 to 40 days.
- 31 October 2026
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 5 (3(91)) , 66-72
Open AccessExtending the shelf life of pastila using multicomponent fruit and berry pastes
The object of research is a pastila with the replacement of 75% of apple puree with a fruit and berry paste based on apples, cranberries and hawthorn. One of the most problematic areas is the lack of research on the patterns of changes in the quality indicators of pastila with a paste based on apples, cranberries and hawthorn during storage. The relevance of the work is due to the need to expand the range of sugar confectionery products with a foamy structure, namely pastila, using fruit and berry raw materials and assessing their quality during storage. The research aimed to determine the nature of changes in the quality indicators of a pastila with a fruit and berry paste based on apples, cranberries and hawthorn compared to a control sample with apple puree, during storage for 40 days. It was found that the pastila with a multi-component fruit and berry paste lost moisture more slowly than the control: over 40 days the rate of its loss was 5.9% lower. The addition of paste also contributed to the slowdown in the increase in product strength. After 40 days, the strength of the pastila with paste increased by 10.0%, while the strength of the control – by 18.4%. The content of reducing substances and acidity during storage increased statistically insignificantly. After 40 days of storage, no bacteria of the E. coli group were detected in the samples. The number of mesophilic aerobic and facultative anaerobic microorganisms, yeasts and mold fungi did not exceed the maximum permissible levels. In the pastila with fruit and berry paste, the accumulation of microorganisms occurred more slowly than in the control sample. The average organoleptic score of the pastila with paste after 40 days was 4.83 points, which corresponded to the level of the control sample on the day of manufacture. The control score on day 40 decreased to 3.90 points. The results obtained justify the feasibility of extending the recommended shelf life of pastila using a multi-component fruit and berry paste based on apples, cranberries and hawthorn from 30 to 40 days.
- Open Access
- 28 October 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (11 (143)) , 6-15
Improvement of a rotary film apparatus with local heat supply and secondary heat recovery
Об’єктом дослідження є процес плівкового уварювання термолабільних багатокомпонентних пюреподібних мас у роторно-плівковому апараті з локалізованим теплопідведенням, самопритискними скребково-розподільними лопатями та рекуперацією теплоти вторинної пари. Вирішується проблема підвищення ефективності уварювання мас інтенсифікацією теплопередачі та рекуперації теплоти за зменшення теплового навантаження на продукт. Удосконалено роторно-плівковий апарат, конструктивними особливостями якого є локалізоване теплопідведення, використання самопритискних скребково-розподільних лопатей та рекуперація теплоти вторинної пари. Конструктивні відмінності створюють умови для формування стабільної плівкової течії з циклічно-оновлювальним плівковим шаром без використання класичних високотемпературних проміжних теплоносіїв. Передбачено використання теплової енергії вторинної пари для попереднього підігрівання вхідної пюреподібної маси. Проведено апробацію апарата під час уварювання багатокомпонентного пюре на основі яблука, топінамбура та гарбуза. Визначено, що підвищення температури уварювання з 55°С до 75°С призводить до зниження граничної напруги зсуву пюре з діапазону 22,1…26,4 Па до 10,2…12,2 Па, а також ефективної в’язкості діапазону 16,2…19,4 Па·с до 7,2…8,7 Па·с. Визначено раціональну область режимів уварювання при витраті дослідної пюреподібної маси – 0,80…1,70 мл/с. При витраті термолабільної маси на рівні 1,3·10–3 кг/с практичне використання самопритискної скребково-розподільної лопаті з локальним теплопідведенням формує підвищення коефіцієнту тепловіддачі з 2890 Вт/(м2·К) до 3540 Вт/(м2·К). Рекуперація теплоти вторинної пари за рахунок впровадження сепараційно-рекуперативного простору забезпечує попереднє підігрівання термолабільної пюреподібної маси з 22°С до 35…43°С в залежності від температури уварювання. Так, при уварюванні при 65°С забезпечується повернення до 70,3 кДж/кг теплоти, а отже і скорочення потреби у витраті теплоти на попереднє підігрівання, фактично на 44,2% та зменшення загального теплового навантаження на технологічний процес приблизно на 5,3%
- 28 October 2026
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 5 (11 (143)) , 6-15
Open AccessImprovement of a rotary film apparatus with local heat supply and secondary heat recovery
Об’єктом дослідження є процес плівкового уварювання термолабільних багатокомпонентних пюреподібних мас у роторно-плівковому апараті з локалізованим теплопідведенням, самопритискними скребково-розподільними лопатями та рекуперацією теплоти вторинної пари. Вирішується проблема підвищення ефективності уварювання мас інтенсифікацією теплопередачі та рекуперації теплоти за зменшення теплового навантаження на продукт. Удосконалено роторно-плівковий апарат, конструктивними особливостями якого є локалізоване теплопідведення, використання самопритискних скребково-розподільних лопатей та рекуперація теплоти вторинної пари. Конструктивні відмінності створюють умови для формування стабільної плівкової течії з циклічно-оновлювальним плівковим шаром без використання класичних високотемпературних проміжних теплоносіїв. Передбачено використання теплової енергії вторинної пари для попереднього підігрівання вхідної пюреподібної маси. Проведено апробацію апарата під час уварювання багатокомпонентного пюре на основі яблука, топінамбура та гарбуза. Визначено, що підвищення температури уварювання з 55°С до 75°С призводить до зниження граничної напруги зсуву пюре з діапазону 22,1…26,4 Па до 10,2…12,2 Па, а також ефективної в’язкості діапазону 16,2…19,4 Па·с до 7,2…8,7 Па·с. Визначено раціональну область режимів уварювання при витраті дослідної пюреподібної маси – 0,80…1,70 мл/с. При витраті термолабільної маси на рівні 1,3·10–3 кг/с практичне використання самопритискної скребково-розподільної лопаті з локальним теплопідведенням формує підвищення коефіцієнту тепловіддачі з 2890 Вт/(м2·К) до 3540 Вт/(м2·К). Рекуперація теплоти вторинної пари за рахунок впровадження сепараційно-рекуперативного простору забезпечує попереднє підігрівання термолабільної пюреподібної маси з 22°С до 35…43°С в залежності від температури уварювання. Так, при уварюванні при 65°С забезпечується повернення до 70,3 кДж/кг теплоти, а отже і скорочення потреби у витраті теплоти на попереднє підігрівання, фактично на 44,2% та зменшення загального теплового навантаження на технологічний процес приблизно на 5,3%
- Open Access
- 29 December 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (11 (138)) , 92-100
Improved vacuum evaporator for concentrating fruit and berry raw materials
This study considers the process of heat and mass transfer during the boiling of fruit and berry pastes in a vacuum evaporator with a mixer that has heating blades. The vacuum evaporator has been improved by modernizing the heat supply system with a flexible film-like electric heater of the radiant type. The heating element is evenly placed on the outer surface of the working container; the unified mixer has its own heating surface with an area of 0.7 m2. This solution not only provides a stable thermal field throughout the volume of the apparatus but also reduces the time for the system to enter the operating mode. In addition, this solution makes it possible to reduce the inertia of the heating process, improve resource efficiency, and avoid local overheating of the product, which is especially important when boiling thermolabile fruit and berry masses. The process of boiling a semi-finished product from apples, jujubes, and blueberries was tested. It was found that at a temperature of 25°C, a paste with a mass fraction of dry matter of 30% has a dynamic viscosity coefficient of 428 Pa∙s, which is 1.5 times higher than that of a puree with 15% dry matter (290 Pa∙s). It was determined that under boiling conditions at temperatures of 52…55°C and a residual pressure of 13…16 kPa, the effective viscosity of a product with a dry matter content of 15 to 30% is within 12…28 Pa∙s (shear rate of 1 s⁻1). The transient characteristic during heating in the improved apparatus is 30% less than that in the basic one. The metal consumption indicators of the improved structure are reduced by 45%, and the boiling time of fruit and berry puree (from 15% to 30% dry matter) is reduced by 16%, which is explained by the increase in the heating surface to a value of 4.4 m2. The specific heat consumption for heating the system decreased from 134.5 to 119 kJ/kg, which confirms the positive effect of the structural solution proposed in this work
- 29 December 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (11 (138)) , 92-100
Open AccessImproved vacuum evaporator for concentrating fruit and berry raw materials
This study considers the process of heat and mass transfer during the boiling of fruit and berry pastes in a vacuum evaporator with a mixer that has heating blades. The vacuum evaporator has been improved by modernizing the heat supply system with a flexible film-like electric heater of the radiant type. The heating element is evenly placed on the outer surface of the working container; the unified mixer has its own heating surface with an area of 0.7 m2. This solution not only provides a stable thermal field throughout the volume of the apparatus but also reduces the time for the system to enter the operating mode. In addition, this solution makes it possible to reduce the inertia of the heating process, improve resource efficiency, and avoid local overheating of the product, which is especially important when boiling thermolabile fruit and berry masses. The process of boiling a semi-finished product from apples, jujubes, and blueberries was tested. It was found that at a temperature of 25°C, a paste with a mass fraction of dry matter of 30% has a dynamic viscosity coefficient of 428 Pa∙s, which is 1.5 times higher than that of a puree with 15% dry matter (290 Pa∙s). It was determined that under boiling conditions at temperatures of 52…55°C and a residual pressure of 13…16 kPa, the effective viscosity of a product with a dry matter content of 15 to 30% is within 12…28 Pa∙s (shear rate of 1 s⁻1). The transient characteristic during heating in the improved apparatus is 30% less than that in the basic one. The metal consumption indicators of the improved structure are reduced by 45%, and the boiling time of fruit and berry puree (from 15% to 30% dry matter) is reduced by 16%, which is explained by the increase in the heating surface to a value of 4.4 m2. The specific heat consumption for heating the system decreased from 134.5 to 119 kJ/kg, which confirms the positive effect of the structural solution proposed in this work
- Open Access
- 26 August 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (11 (136)) , 25-32
Determining the heat and mass exchange efficiency of a scraper heat exchanger for heating food semi-finished products
This study's object is the process of heating fruit and berry purees made from apple, apricot, and honeysuckle. This paper reports an improved structure of a scraper heat exchanger for heating viscous liquid food products based on fruit and berry raw materials (purees, pastes). One of the main elements of the modernization is heating with a flexible film resistive electric heater of the radiant type instead of the conventional steam system, which has made it possible to eliminate steam fittings and reduce energy consumption. Additional equipment of the heat exchanger with a hinged blade with a remote plate enables turbulization of the product flow in the heat exchange zone, contributing to the formation of a stable film flow on the heating surface, which significantly improves the efficiency of heat transfer. The experimental and computational studies revealed the dependence of the heat transfer coefficient on raw material consumption and the frequency of rotation of the apparatus shaft. It was established that the heat transfer coefficient depends on the product flow rate and, after reaching the maximum (13…15) 10–3 kg/s, it decreases. The influence of rotor speed is less significant and is manifested mainly during the transition from 1.0 to 1.5 s⁻1. Comparative analysis revealed that the use of an improved blade with a remote plate makes it possible to increase the heat transfer coefficient by 1.2 times compared to the conventional design. Calculations of specific heat consumption showed its decrease from 250 to 222 kJ/kg, which is a saving of 12.5%. The proposed structural solutions make it possible to ensure the stability of temperature regimes, reduce energy consumption, improve the quality of heat treatment and process automation. This is especially important for the processing of heat-sensitive and dense products in the food industry
- 26 August 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 4 (11 (136)) , 25-32
Open AccessDetermining the heat and mass exchange efficiency of a scraper heat exchanger for heating food semi-finished products
This study's object is the process of heating fruit and berry purees made from apple, apricot, and honeysuckle. This paper reports an improved structure of a scraper heat exchanger for heating viscous liquid food products based on fruit and berry raw materials (purees, pastes). One of the main elements of the modernization is heating with a flexible film resistive electric heater of the radiant type instead of the conventional steam system, which has made it possible to eliminate steam fittings and reduce energy consumption. Additional equipment of the heat exchanger with a hinged blade with a remote plate enables turbulization of the product flow in the heat exchange zone, contributing to the formation of a stable film flow on the heating surface, which significantly improves the efficiency of heat transfer. The experimental and computational studies revealed the dependence of the heat transfer coefficient on raw material consumption and the frequency of rotation of the apparatus shaft. It was established that the heat transfer coefficient depends on the product flow rate and, after reaching the maximum (13…15) 10–3 kg/s, it decreases. The influence of rotor speed is less significant and is manifested mainly during the transition from 1.0 to 1.5 s⁻1. Comparative analysis revealed that the use of an improved blade with a remote plate makes it possible to increase the heat transfer coefficient by 1.2 times compared to the conventional design. Calculations of specific heat consumption showed its decrease from 250 to 222 kJ/kg, which is a saving of 12.5%. The proposed structural solutions make it possible to ensure the stability of temperature regimes, reduce energy consumption, improve the quality of heat treatment and process automation. This is especially important for the processing of heat-sensitive and dense products in the food industry
- Open Access
- 27 December 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (11 (132)) , 73-83
Applying chia seeds to improve the structural characteristics and nutrient composition of whipped candies
The object of this study is the technology of whipped candies with the introduction of whole and crushed chia seeds. Whole seeds were added at the stage of whipping the protein (% of the mass of dry egg albumin), and crushed seeds were added during the preparation of the milk-fat mixture (% of the mass of fat). The introduction of the additive solves the task of improving the structural characteristics of whipped candy masses and candies made on their basis. The issue of improving the nutritional composition of products has also been resolved. It was established that the introduction of whole chia seeds (up to 50 % of the mass of dry egg albumin included) contributes to the improvement of the foaming of brewed protein masses during whipping and to the reduction of their density. Increasing the dosage of chia causes the deterioration of these indicators. In view of this, it is recommended to limit its dosage to 50 % of the weight of dry albumin when adding whole seeds to the brewed whipped protein mass. It was noted that when adding whole/crushed chia seeds in the amount of (50/40) %, (50/50) %, and (50/60) % of the mass of dry albumin/fat, the viscosity of unstructured candy masses increases slightly. Due to this, the duration of their structure formation is reduced, and the rate of shrinkage decreases. Whipped candies from such masses, compared to the control ones, are characterized by higher values of adhesion, strength, and density indicators. However, the visual deterioration of the porosity and compaction of the structure is characteristic only of the samples with the content of whole/crushed seeds (50/60) %. That is, the rational dosage of whole/crushed chia seeds is (50/50) % of the weight of dry albumin/fat. Such products are characterized by improved nutrient composition. In particular, the content of proteins and non-starch polysaccharides increases, the balance of fats improves, and the content of micronutrients such as polyphenols, minerals, and vitamins increases significantly
- 27 December 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (11 (132)) , 73-83
Open AccessApplying chia seeds to improve the structural characteristics and nutrient composition of whipped candies
The object of this study is the technology of whipped candies with the introduction of whole and crushed chia seeds. Whole seeds were added at the stage of whipping the protein (% of the mass of dry egg albumin), and crushed seeds were added during the preparation of the milk-fat mixture (% of the mass of fat). The introduction of the additive solves the task of improving the structural characteristics of whipped candy masses and candies made on their basis. The issue of improving the nutritional composition of products has also been resolved. It was established that the introduction of whole chia seeds (up to 50 % of the mass of dry egg albumin included) contributes to the improvement of the foaming of brewed protein masses during whipping and to the reduction of their density. Increasing the dosage of chia causes the deterioration of these indicators. In view of this, it is recommended to limit its dosage to 50 % of the weight of dry albumin when adding whole seeds to the brewed whipped protein mass. It was noted that when adding whole/crushed chia seeds in the amount of (50/40) %, (50/50) %, and (50/60) % of the mass of dry albumin/fat, the viscosity of unstructured candy masses increases slightly. Due to this, the duration of their structure formation is reduced, and the rate of shrinkage decreases. Whipped candies from such masses, compared to the control ones, are characterized by higher values of adhesion, strength, and density indicators. However, the visual deterioration of the porosity and compaction of the structure is characteristic only of the samples with the content of whole/crushed seeds (50/60) %. That is, the rational dosage of whole/crushed chia seeds is (50/50) % of the weight of dry albumin/fat. Such products are characterized by improved nutrient composition. In particular, the content of proteins and non-starch polysaccharides increases, the balance of fats improves, and the content of micronutrients such as polyphenols, minerals, and vitamins increases significantly
- Open Access
- 3 November 2024
- Published by Private Company Technology Center
- p. 64-91
Scientific and practical justification of innovative approaches to production of multicomponent semi-finished products for food products in the conditions of food security of the country
The production of functional products in the form of independent and multicomponent compositions based on vegetable semi-finished products of a high degree of readiness for further use during the manufacture of various food products is proposed. The proposed adaptive mechanism makes it possible to simulate the competitiveness of the agro-industrial sector in the conditions of taking into account the flow parameters of traditional micro- and macro-environments for the optimal adaptation of innovative approaches when implementing resource-saving hardware and technological solutions. A resource-saving method for the production of multi-component puree-like semi-finished products with a high degree of readiness based on own plant raw materials of apple, Jerusalem artichoke, cranberry, beetroot and hawthorn has been developed. The hardware implementation of the resource-saving method is provided by the developed author's designs of unified mobile low-temperature devices, the feature of which is the reduction of energy and metal consumption, ensuring uniformity of heat supply, stabilization of the temperature range, the possibility of using secondary heat energy. The proposed method is unified due to the implementation of the concentration process as needed in the form of a film flow (unified rotary-film apparatus), in a flow (unified tubular apparatus) and boiling in mass (unified vacuum-evaporation apparatus). Also, due to technological necessity, there is an additional technological operation of drying, which is implemented on a fundamentally new thermal radiation single-drum roller dryer. The film-like electronic heater of the radiating type has been improved. Thanks to the improvement, the following technical properties of the film-like electronic heater of the radiating type have been achieved in terms of the maximum temperature of the working surface (40...180 oС). At the same time, the IR wavelength set from 2.0 to 15 μm with a power of up to 800 W/cm2 and a technical efficiency factor (0.97) are optimal for heat and mass transfer processing of multicomponent vegetable semi-finished products. Thus, the reduction of: weight and specific metal capacity of the developed devices is ensured; duration of processing of thermolabile plant raw materials. An equipment-technological line for the production of vegetable polycomponent semi-finished products with a high degree of readiness has been developed, which can be located directly on farmland for the cultivation of natural raw materials. The practical implementation of the proposed innovative approaches in the production of semi-finished products will allow to support the own capacities of farmland, modernization of processing and production sectors of agro-industry. The resulting functional polycomponent semi-finished products will allow expanding the range of food products with an increased content of functionally physiological ingredients, predicted rheological and organoleptic properties. The introduction of developed semi-finished products into the recipes of various food products will reduce the need to use synthetic ingredients, replacing them with natural components.
- 3 November 2024
- Published by Private Company Technology Center
- p. 64-91
Open AccessScientific and practical justification of innovative approaches to production of multicomponent semi-finished products for food products in the conditions of food security of the country
The production of functional products in the form of independent and multicomponent compositions based on vegetable semi-finished products of a high degree of readiness for further use during the manufacture of various food products is proposed. The proposed adaptive mechanism makes it possible to simulate the competitiveness of the agro-industrial sector in the conditions of taking into account the flow parameters of traditional micro- and macro-environments for the optimal adaptation of innovative approaches when implementing resource-saving hardware and technological solutions. A resource-saving method for the production of multi-component puree-like semi-finished products with a high degree of readiness based on own plant raw materials of apple, Jerusalem artichoke, cranberry, beetroot and hawthorn has been developed. The hardware implementation of the resource-saving method is provided by the developed author's designs of unified mobile low-temperature devices, the feature of which is the reduction of energy and metal consumption, ensuring uniformity of heat supply, stabilization of the temperature range, the possibility of using secondary heat energy. The proposed method is unified due to the implementation of the concentration process as needed in the form of a film flow (unified rotary-film apparatus), in a flow (unified tubular apparatus) and boiling in mass (unified vacuum-evaporation apparatus). Also, due to technological necessity, there is an additional technological operation of drying, which is implemented on a fundamentally new thermal radiation single-drum roller dryer. The film-like electronic heater of the radiating type has been improved. Thanks to the improvement, the following technical properties of the film-like electronic heater of the radiating type have been achieved in terms of the maximum temperature of the working surface (40...180 oС). At the same time, the IR wavelength set from 2.0 to 15 μm with a power of up to 800 W/cm2 and a technical efficiency factor (0.97) are optimal for heat and mass transfer processing of multicomponent vegetable semi-finished products. Thus, the reduction of: weight and specific metal capacity of the developed devices is ensured; duration of processing of thermolabile plant raw materials. An equipment-technological line for the production of vegetable polycomponent semi-finished products with a high degree of readiness has been developed, which can be located directly on farmland for the cultivation of natural raw materials. The practical implementation of the proposed innovative approaches in the production of semi-finished products will allow to support the own capacities of farmland, modernization of processing and production sectors of agro-industry. The resulting functional polycomponent semi-finished products will allow expanding the range of food products with an increased content of functionally physiological ingredients, predicted rheological and organoleptic properties. The introduction of developed semi-finished products into the recipes of various food products will reduce the need to use synthetic ingredients, replacing them with natural components.
- Open Access
- 3 June 2024
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 3 (3(77)) , 49-52
Determination of the possibilities of using the universal low-temperature rotary apparatus for the production of meat and vegetable products under the conditions of providing uniform heat supply
The object of research is the process of frying a meat-vegetable product in the developed universal low-temperature rotary apparatus. The problem of ensuring the uniformity of the temperature field during low-temperature processing of meat and vegetable products is solved in the developed universal low-temperature rotary apparatus. The expected effect during the approbation of the apparatus is predicted under the condition of eliminating high-temperature intermediate coolants (hot air, etc.) due to the use of a film-like resistive electronic heater of the radiating type. The temperature field is established, which confirms the uniformity of the temperature effect on meat and vegetable products, and a slight deviation within the limits of autonomous exhaust fans is not critical and within the permissible error. Also, the introduction of Peltier elements into the design of the rotary apparatus will allow converting thermal energy into a low-voltage supply voltage (3–6 W) and, already at 20 °C, ensure autonomous operation of fans. The obtained results in the form of practical implementation of the developed apparatus will allow to implement low-temperature processing of meat and vegetable products. This allows to maximally preserve the functional properties of meat raw materials and the physiological properties of vegetable semi-finished products with a high degree of readiness. The practical implementation of the universal low-temperature rotary apparatus from the side of constructive implementation due to the use of functional containers makes it possible to obtain a wide range of assortment of meat products, both in the shell and without the shell. The elimination of high-temperature intermediate heat carriers (hot air, steam, etc.), their technical networks and generating apparatuss ensures energy and metal-intensive resource savings. In addition, the introduction of multicomponent vegetable semi-finished products of a high degree of readiness (powders, pastes, etc.) into the recipes of meat products will lead to a partial replacement of the main recipe components and an increase in the functional properties of the finished products.
- 3 June 2024
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 3 (3(77)) , 49-52
Open AccessDetermination of the possibilities of using the universal low-temperature rotary apparatus for the production of meat and vegetable products under the conditions of providing uniform heat supply
The object of research is the process of frying a meat-vegetable product in the developed universal low-temperature rotary apparatus. The problem of ensuring the uniformity of the temperature field during low-temperature processing of meat and vegetable products is solved in the developed universal low-temperature rotary apparatus. The expected effect during the approbation of the apparatus is predicted under the condition of eliminating high-temperature intermediate coolants (hot air, etc.) due to the use of a film-like resistive electronic heater of the radiating type. The temperature field is established, which confirms the uniformity of the temperature effect on meat and vegetable products, and a slight deviation within the limits of autonomous exhaust fans is not critical and within the permissible error. Also, the introduction of Peltier elements into the design of the rotary apparatus will allow converting thermal energy into a low-voltage supply voltage (3–6 W) and, already at 20 °C, ensure autonomous operation of fans. The obtained results in the form of practical implementation of the developed apparatus will allow to implement low-temperature processing of meat and vegetable products. This allows to maximally preserve the functional properties of meat raw materials and the physiological properties of vegetable semi-finished products with a high degree of readiness. The practical implementation of the universal low-temperature rotary apparatus from the side of constructive implementation due to the use of functional containers makes it possible to obtain a wide range of assortment of meat products, both in the shell and without the shell. The elimination of high-temperature intermediate heat carriers (hot air, steam, etc.), their technical networks and generating apparatuss ensures energy and metal-intensive resource savings. In addition, the introduction of multicomponent vegetable semi-finished products of a high degree of readiness (powders, pastes, etc.) into the recipes of meat products will lead to a partial replacement of the main recipe components and an increase in the functional properties of the finished products.
- Open Access
- 30 April 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (11 (128)) , 46-55
Improving the production technique of pat based on multicomponent fruit and berry paste
The object of this study is the technology of making fruit pat based on apple, apricot, and rosehip paste. To increase the organoleptic and physical-chemical quality indicators, the technology of functional fruit pat for functional purposes has been improved by using fruit and berry paste as a fruit base. Accordingly, a technique for the production of fruit and berry paste (apple 50 %, apricot 35 %, rosehip 15 %) was devised. The peculiarity of the technique is a short-term, 30–40 s, concentration at 52–54 °C in a rotary evaporator, which will positively contribute to the preservation of the functional ingredients of raw materials, unlike conventional batch vaporizers. The paste has an improved viscous structure and organoleptic properties compared to the control, which makes it possible to recommend it as a fruit base for pat. The viscosity of the pat mass based on the paste at 50 °C is 225 Pa∙s, which is 20 % higher than the control ("Fruit" pat), which will contribute to better structure formation. At the same time, the sample with the paste has better indicators of taste and smell, which can be characterized as natural and harmonious. The new pat has a natural orange saturated color and is characterized by a long-lasting consistency, and the content of functional ingredients significantly exceeds the control sample. The quantitative content of dietary fiber, vitamin A, C, β-carotene is important, according to which the devised pat based on the paste can be classified as a functional product. The new products are characterized by an organic composition of raw materials, do not contain artificial dyes and flavors, and the proposed technological solutions simplify the process of their production, which makes it possible to recommend the technology for implementation at craft enterprises
- 30 April 2024
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 2 (11 (128)) , 46-55
Open AccessImproving the production technique of pat based on multicomponent fruit and berry paste
The object of this study is the technology of making fruit pat based on apple, apricot, and rosehip paste. To increase the organoleptic and physical-chemical quality indicators, the technology of functional fruit pat for functional purposes has been improved by using fruit and berry paste as a fruit base. Accordingly, a technique for the production of fruit and berry paste (apple 50 %, apricot 35 %, rosehip 15 %) was devised. The peculiarity of the technique is a short-term, 30–40 s, concentration at 52–54 °C in a rotary evaporator, which will positively contribute to the preservation of the functional ingredients of raw materials, unlike conventional batch vaporizers. The paste has an improved viscous structure and organoleptic properties compared to the control, which makes it possible to recommend it as a fruit base for pat. The viscosity of the pat mass based on the paste at 50 °C is 225 Pa∙s, which is 20 % higher than the control ("Fruit" pat), which will contribute to better structure formation. At the same time, the sample with the paste has better indicators of taste and smell, which can be characterized as natural and harmonious. The new pat has a natural orange saturated color and is characterized by a long-lasting consistency, and the content of functional ingredients significantly exceeds the control sample. The quantitative content of dietary fiber, vitamin A, C, β-carotene is important, according to which the devised pat based on the paste can be classified as a functional product. The new products are characterized by an organic composition of raw materials, do not contain artificial dyes and flavors, and the proposed technological solutions simplify the process of their production, which makes it possible to recommend the technology for implementation at craft enterprises
- Open Access
- 28 December 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (11 (126)) , 103-111
Improving the reactor for thickening organic plant-based polycomponent semi-finished products with high degree of readiness
The object of this study is the process of thickening organic polycomponent compositions based on Jerusalem artichoke, apples, pumpkin, cranberry, and dogwood to produce high-level semi-finished products employing the proposed equipment and technological solutions implemented in a unified reactor. Conventional thickening devices have a steam heat supply system, which leads to overheating of certain layers of raw materials and prevents the mobile properties of the apparatus under the conditions of significant execution of organic properties of raw materials. The introduction of apratur-technological solutions could provide the competitive advantage of the reactors by heating the film-like emitting electric heater using a mixing device with a heating surface. Increasing the total area of heat exchange to 1.24 m2 (prototype – 0.98 m2). There is a decrease in specific heat consumption by 20 %, specific metal capacity by 47 %, and the duration of the process by 30 %. We have determined rheological properties in the thickening of the organic polycomponent composition of the paste at a temperature of 55 °C and a shift rate within 3.0…4.5 s-1, effective viscosity is in the range of 22...3.5 Pa·s. In this case, the kinetics of boiling in an improved reactor are by 27 % smaller than that in the basic structure R-P-150m. According to organoleptic indicators, the composition "B" has a pleasant harmonious taste of all components. The results of the studies are relevant for practical implementation in the temperature range from 35 °C to 55 °C. The hardware and technological solutions form the competitiveness of mobile reactors for the thickening of plant semi-finished products under conditions of elimination of the steam component and an increase in the surface of the heat exchange of the mixing device. Providing preference in operating duration with the simultaneous use of Peltier elements to convert secondary heat to the autonomous work of exhaust fans in the motor compartment
- 28 December 2023
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 6 (11 (126)) , 103-111
Open AccessImproving the reactor for thickening organic plant-based polycomponent semi-finished products with high degree of readiness
The object of this study is the process of thickening organic polycomponent compositions based on Jerusalem artichoke, apples, pumpkin, cranberry, and dogwood to produce high-level semi-finished products employing the proposed equipment and technological solutions implemented in a unified reactor. Conventional thickening devices have a steam heat supply system, which leads to overheating of certain layers of raw materials and prevents the mobile properties of the apparatus under the conditions of significant execution of organic properties of raw materials. The introduction of apratur-technological solutions could provide the competitive advantage of the reactors by heating the film-like emitting electric heater using a mixing device with a heating surface. Increasing the total area of heat exchange to 1.24 m2 (prototype – 0.98 m2). There is a decrease in specific heat consumption by 20 %, specific metal capacity by 47 %, and the duration of the process by 30 %. We have determined rheological properties in the thickening of the organic polycomponent composition of the paste at a temperature of 55 °C and a shift rate within 3.0…4.5 s-1, effective viscosity is in the range of 22...3.5 Pa·s. In this case, the kinetics of boiling in an improved reactor are by 27 % smaller than that in the basic structure R-P-150m. According to organoleptic indicators, the composition "B" has a pleasant harmonious taste of all components. The results of the studies are relevant for practical implementation in the temperature range from 35 °C to 55 °C. The hardware and technological solutions form the competitiveness of mobile reactors for the thickening of plant semi-finished products under conditions of elimination of the steam component and an increase in the surface of the heat exchange of the mixing device. Providing preference in operating duration with the simultaneous use of Peltier elements to convert secondary heat to the autonomous work of exhaust fans in the motor compartment
- Open Access
- 30 November 2023
- Published by OU Scientific Route in EUREKA: Life Sciences
- No. 6,p. 28-36
Assessment of the quality of cream-white candy with the addition of fruit and berry paste during storage
One of the trends in modern nutrition is targeting people who care about their health. Confectionery made from sugar is in stable demand among people of different age groups, and research into their enrichment with vital nutrients is promising. One of the ways to implement such a task is the use of fruit and berry processing products, in particular in the form of pastes, during the production of candies. The purpose of the research was to evaluate the quality of cream-whipped candies with the addition of apple, quince and blackcurrant paste (40: 50: 10) during storage. It was established that the process of hydrolysis of the lipid component of candies with paste occurs at a higher rate compared to the control. This is due to their higher acidity and moisture. However, the fats of candies with the addition of fruit and berry paste are less prone to the formation of peroxides, which is explained by the presence in their composition of a significant number of polyphenolic compounds with pronounced antioxidant properties (anthocyanins and catechins), which are absent in the control sample. In particular, on the 60th day of storage, the value of the peroxide value for the sample with the additive was 27.9 % less than that of the control product. It has been established that candies with paste lose moisture more slowly due to the higher content of non-starch polysaccharides. Thus, on the 60th day, the moisture content of the control decreased by 11.33 %, and the product with paste decreased by 8.72 %. Smaller moisture losses ensure greater stability of their rheological characteristics during storage. It was noted that the strength and density of such candies increase more slowly than in the sample without the additive. The results of the research indicate the compliance of cream-whipped candies with fruit and berry paste to the normative storage terms in terms of oxidative stability of the lipid complex, physico-chemical and sensory indicators
- 30 November 2023
- Published by OU Scientific Route in EUREKA: Life Sciences
- No. 6,p. 28-36
Open AccessAssessment of the quality of cream-white candy with the addition of fruit and berry paste during storage
One of the trends in modern nutrition is targeting people who care about their health. Confectionery made from sugar is in stable demand among people of different age groups, and research into their enrichment with vital nutrients is promising. One of the ways to implement such a task is the use of fruit and berry processing products, in particular in the form of pastes, during the production of candies. The purpose of the research was to evaluate the quality of cream-whipped candies with the addition of apple, quince and blackcurrant paste (40: 50: 10) during storage. It was established that the process of hydrolysis of the lipid component of candies with paste occurs at a higher rate compared to the control. This is due to their higher acidity and moisture. However, the fats of candies with the addition of fruit and berry paste are less prone to the formation of peroxides, which is explained by the presence in their composition of a significant number of polyphenolic compounds with pronounced antioxidant properties (anthocyanins and catechins), which are absent in the control sample. In particular, on the 60th day of storage, the value of the peroxide value for the sample with the additive was 27.9 % less than that of the control product. It has been established that candies with paste lose moisture more slowly due to the higher content of non-starch polysaccharides. Thus, on the 60th day, the moisture content of the control decreased by 11.33 %, and the product with paste decreased by 8.72 %. Smaller moisture losses ensure greater stability of their rheological characteristics during storage. It was noted that the strength and density of such candies increase more slowly than in the sample without the additive. The results of the research indicate the compliance of cream-whipped candies with fruit and berry paste to the normative storage terms in terms of oxidative stability of the lipid complex, physico-chemical and sensory indicators