Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ionut-Cristian Romanu has a total of 22 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Method and Device for the Evaluation of the Static and Dynamic Coefficients of Friction. Part 2: Construction of the Device and Methodology

    by Costica Lupascu, Stelian Alaci, Ionut-Cristian Romanu, Florina-Carmen Ciornei, Toma-Marian Ciocirlan, Delia-Aurora Cerlinca

  • Method and Device for the Evaluation of the Static and Dynamic Coefficients of Friction. Part 1: Proposed Method

    by Toma-Marian Ciocirlan, Stelian Alaci, Ionut-Cristian Romanu, Florina-Carmen Ciornei, Costica Lupascu, Delia-Aurora Cerlinca

  • Open Access

    Aspects Concerning Validation of Theoretical Solution of Generalised Ladder Problem

    by Costica Lupascu, Stelian Alaci, Florina-Carmen Ciornei, Ionut-Cristian Romanu, Delia-Aurora Cerlinca, Carmen Bujoreanu

    One of the most well-known problems of dynamics is the “ladder problem”. In this paper, a theoretical model is proposed followed by the experimental validation of the predicted solution. The model refers to a rod of negligible thickness with the ends leaning frictionless on two walls. By approximating the rod as a segment, the problem is simplified, and the Lagrange equations can be applied. The experimental validation of the model had to address several challenges: the actual rod–wall contacts are singular points, friction cannot be neglected, and the rod’s motion must remain confined to the vertical plane. The physical “ladder” was designed as a cylindrical rod with two identical balls of well-controlled geometry, fixed at the ends. These spheres make contact with two half-cylinder grooves—one vertical and one horizontal—ensuring that the motion remains parallel to the vertical plane. The presence of dry friction in the sphere–groove contacts leads to a complex, strongly nonlinear differential equation of motion, requiring numerical methods of integration. A test-rig was designed and constructed for the experimental study of motion, and an aspect overlooked by the theoretical model was emphasised: the interruption of contact with the vertical wall. An excellent agreement was found between the experimental data and the theoretical results.

  • Open Access

    A Symmetrical RRPRR Robust Coupling for Crossed Axes Transmission

    by Toma-Marian Ciocirlan, Stelian Alaci, Florina-Carmen Ciornei, Ionut-Cristian Romanu, Ioan Doroftei

    A new coupling solution for transmitting the rotation motion between two shafts with crossed axes is proposed. Based on structural considerations, a planar (P) pair is introduced into the structure of the mechanism, presenting the advantage of reduced costs due to the constructive and manufacturing simplicity and to high reliability. The proposed mechanism is of the RRPRR type, and the structural symmetry simplifies substantially the construction of the mechanism. The constructive parameters of the mechanism are the angle and distance between the driving and driven shaft and also the length of the common normal between the axes of driving and driven revolute (R) pairs, and the axes of the revolute pairs of the coupling chain, respectively. Due to the presence of the planar pair, the Hartenberg–Denavit method of homogenous operators is not applicable. The kinematic analysis for a specified motion of the driving element requires two stages: finding the relative motions from the revolute pairs and the motions from the planar pair. The RRPRR transmission is analysed for geometrical asymmetrical and symmetrical cases; the latter is more convenient and the design principles are presented. Concerning the dimensional optimization, it is found to be a methodology for ensuring that the transmission ratio of the mechanism can be maintained within a stipulated range. Based on the kinematical calculus and geometrical optimization, the mechanism was designed and manufactured.

  • Open Access

    Some Aspects of the Effects of Dry Friction Discontinuities on the Behaviour of Dynamic Systems

    by Stelian Alaci, Costica Lupascu, Ionut-Cristian Romanu, Delia-Aurora Cerlinca, Florina-Carmen Ciornei

    Most studies in the literature consider the value of the coefficient of dynamic friction to be constant. We studied the evolution of a dynamic system when the coefficient of friction results in different values depending on the contact surfaces. A system with four balls fixed on an aluminium plate was driven with constant velocity into motion on the coaxial races of two identical outer bearing rings. The assembly presents a motion with periodic variable amplitude between two extremes, a fact that suggests the presence of a periodical excitation. The test was repeated, but this time, new bodies were used, which were two identical bodies made of two balls rigidised via a short cylindrical rod. When the rings were driven into rotational motion, the two bodies performed different motions; if the bodies were inter-changed, the differences between the motions remained. The rings were analysed, and a small region on the race of one ring was observed, where the roughness was considerably greater than the rest of the surface. Then, a mathematical model for the dynamic system with different friction coefficients was proposed and solved. This model is capable of simulating different situations, such as oscillatory motion and circular motion, with or without separation of the contacting bodies. Here, we present a dynamic model with Hertzian contact points in the presence of dry friction, with the coefficient of friction changing suddenly on the contacting surfaces.


  • Open Access

    Mathematical Model of the Evolution of a Simple Dynamic System with Dry Friction

    by Stelian Alaci, Florina-Carmen Ciornei, Costica Lupascu, Ionut-Cristian Romanu

    A simple dynamic system with dry friction is studied theoretically and numerically. Models of systems including dry friction are not easily obtained, as defining the relationship between the friction force and the relative velocity presents a significant challenge. It is known that friction forces exhibit notable discontinuities when there is a change in the direction of motion. Additionally, when the relative motion ceases, the friction force can assume any value within a certain range. In the literature, numerous models of dry friction are presented, and most of them assume a biunivocal dependency of the friction force with respect to relative velocity. The dynamic system considered here is a tilted rod with spherical ends, initially at rest. Dry friction forces are evident at the contact point with the horizontal plane. The ball–plane contact highlights the rolling friction or/and sliding friction. The problem is theoretically solved after adopting one of the two cases of friction: rolling friction or sliding friction. The nonlinear differential equations of motion have been derived, along with expressions for the magnitude of the normal reaction and the friction force. The results of the model are displayed graphically for three different sets of values for the coefficient of friction. It is revealed that there is a critical value of the coefficient of friction that determines the transition from rolling to sliding regimes. To validate the theoretical model, dynamic simulation software was utilised. The excellent match between the theoretical predictions and the results from the numerical simulation confirms the accuracy of the proposed analytical solution.


  • Open Access

    Wear Reduction on the Roller–Shoe Mechanism at High Operation Loads

    by Constantin Răzvan Iordache, Carmen Bujoreanu, Stelian Alaci, Florina-Carmen Ciornei, Ionut-Cristian Romanu

    The roller–shoe mechanism is a classic mechanical assembly with an essential role in motion transmission. Common rail high-pressure pumps are an example of a complex assembly that uses such a mechanism to transform the rotation motion into a translation one. The rolling element of the mechanism is represented by a cylindrical roller. Although it can carry heavy loads due to its design, a proper surface profile could significantly increase the life of the entire mechanism. A better solution can be achieved using a logarithmic profile. The shoe is the second base element of the mechanism. It is a part with an inner cylindrical surface and it is separated from the roller by a thin lubricant film. Considering this, increasing the hardness of the roller–shoe contact surface can be obtained using a suitable coating. The positive results of this coating are highlighted using endurance tests to which high-pressure pumps are subjected. Therefore, the roller profile and the shoe coating represent two directions for improving the contact between the mechanism transmission elements, in terms of wear reduction. The purpose of this paper is to identify a suitable roller profile and to highlight its impact on the shoe coating.


  • Open Access

    A Rapid and Inexpensive Method for Finding the Basic Parameters of Involute Helical Gears

    by Stelian Alaci, Florina-Carmen Ciornei, Ionut-Cristian Romanu, Ioan Doroftei, Carmen Bujoreanu, Ioan Tamașag

    The paper proposes a rapid, straightforward, and inexpensive method for finding the basic parameters of helical gears with an involute profile. The basic parameters envisaged are the normal module, normal profile shift coefficient, and the helix angle. The proposed method uses balls introduced between the teeth and, thus, the contact with the measuring device surfaces is of the point type, and the centres of the balls are positioned symmetrically with respect to the measuring direction. The condition that the centre of the ball occupies an imposed position is mandatory. Additionally, there is the condition of the positions of the contact points between the balls and the flanks of the teeth. Two sets of balls of different sizes are necessary for a measurement. The conditions of the balls’ positioning lead to a system of five unknowns. The methodology of solving the system is detailed and the method is exemplified for an actual helical gear. The new proposed method is based on the distance over pins but, using balls, presents the following advantages: It can be applied equally to all gears, regardless of the odd or even number of teeth. Furthermore, the dimension to be measured is singular compared to the dimension over pins when a maximum value must be found from several measurements.


  • Open Access

    A New Direct and Inexpensive Method and the Associated Device for the Inspection of Spur Gears

    by Stelian Alaci, Florina-Carmen Ciornei, Ionut-Cristian Romanu, Ioan Doroftei, Carmen Bujoreanu, Ioan Tamașag

    This paper proposes a new rapid and straightforward method along with a related device for finding the three basic parameters of an actual external involute spur gear. The number of teeth is easily counted, but the other two parameters—the module and the coefficient of profile shift—are difficult to identify. The method is based on the principle of inspection of the precision of gear teeth, using the dimension over pins, when the maximum distance is measured between the lateral surfaces of two cylindrical rollers of well-controlled dimensions, placed into the spaces between teeth. The dimension over pins is applied as a function of the number of teeth (odd or even) and requires experience (and this is the main disadvantage of the method) for finding the correct maximum distance between pins. The new method eliminates this drawback as it proposes a measuring scheme where four identical rollers are used in a designed inspection device. The system is statically determinate and, therefore, the dimension to be measured is unequivocally found. A new relation for the dimension to be measured is deduced and allows for finding the module and the coefficient of profile shift. The inspection device is described and a concrete case is presented for exemplifying the methodology. A further application permits finding the centre distance for an external spur gearing. Unlike the classical technique where the centre distance is obtained based on the centring surfaces of the wheels, the new method implies only dimensions measured through flank measurements, thus eliminating errors introduced by the deviations between the flanks and the centring surfaces of the wheels.


  • Open Access

    The Effect of Dry Friction upon the Dynamics of a Short Eccentric Rotor: An Analytical and Experimental Study

    by Stelian Alaci, Ilie Musca, Carmen Bujoreanu, Ionut-Cristian Romanu, Nicolae-Adrian Nitu, Florina-Carmen Ciornei

    The paper proposes the study of dry friction by means of a short eccentric rotor. The rotor was designed and realised in the laboratory. In an ideal frictionless situation, a rotor actuated by gravity will have an angular velocity which increases indefinitely. The analytical model assumes dry friction in the bushing of the rotor and the main result reveals that the angular velocity either stabilizes around a certain value or drops to zero. Two situations of friction were considered for the theoretical model: first only dynamic friction and secondly, both static and dynamic friction are present. The analytical model of the dynamics of the rotor presents the advantage that it can be applied for diverse friction cases, from dry friction to complex dry friction and wet friction. Experimental tests were carried out on the designed and constructed device; they are in very good agreement with the results of the theoretical model.