LSLars Michael Skjolding

Lars Michael Skjolding

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lars Michael Skjolding has a total of 92 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Biomass‐Based H 2 S Scavengers: Michael Acceptors

    by Xifu Liang, Victor Friis, Karolina Agata Szlek, Asger Munk Koue, Jesper Bendix, Lars Skjolding, Sergey Kucheryavskiy, Marco Maschietti, Christian Marcus Pedersen

    Michael acceptors derived from biomass resources, such as carbohydrates, have been synthesized and their H 2 S scavenging properties studied. The most promising candidates were compared with the commercial H 2 S scavenger MEA‐triazine by studying the aqueous phase scavenging reactions using in situ Raman spectroscopy and the gas–liquid reactions were evaluated in a flow setup. Based on cost and scavenging efficiency considerations, the industrially most promising candidates were submitted to ecotoxicity studies. We have found three families of Michael acceptors, which are readily available and can be tailor‐made to serve as sulfide scavengers under different conditions.


  • Open Access

    Providing environmental and climate-related decision support on PFASs use in photovoltaic panels from a life-cycle perspective

    by Rune Winther Fabrin Olsen, Lars Michael Skjolding, Rune Hjorth, Steffen Foss Hansen, Morten Birkved

    Current LCA methodologies lack sufficient maturity to provide robust decision support regarding PFAS use in photovoltaic panels.

  • Open Access

    Hydrothermal oxidation of MEA-triazine spent and unspent H2S scavengers in continuous-flow reactor

    by Alessandro Perrucci, Lars Michael Skjolding, Sarah Fredung Hückelkamp, Sofie Askjær Hass, Maria Nymann Christensen, Jens Muff, Marco Maschietti


  • Open Access

    Thermosetting Resin for Plug and Abandonment of Oil Wells with Reduced Environmental Impact

    by Maria Echarri-Giacchi, Christian Husum Frederiksen, Lars Michael Skjolding, Anne Ladegaard Skov, Magdalena Skowyra

    Plug and abandonment of offshore oil wells is a costly and time-consuming process, yet it is necessary for the ever-increasing number of mature fields in the region of the Danish North Sea, as well as globally. Current practices ensuring durable solutions for the complete zonal isolation of oil wells have a large environmental impact. This paper proposes a novel resin that could be mixed on the platform and pumped into the tubing in a liquid state. The increased temperature inside the oil well initiates the cross-linking reaction of the liquid resin, creating a solid and impermeable barrier. The liquid resin is thermally stable up to 180 °C and can be handled for up to 20 h at room temperature, preventing setting before intended while decreasing environmental impact. The solid resin has a compressive strength of 54 MPa and a steel adhesion strength of 6.27 MPa, highlighting its ability to withstand extreme downhole conditions.


  • Quantification and ecotoxicological contribution of volatile compounds in produced water effluents

    by Matteo Ottaviani, Neri Bonciani, Markus Varlund Strange, Emil Hoffmann Bohr, Lars Michael Skjolding, Karen Louise Feilberg


  • Behaviour of advanced materials in environmental aquatic media – dissolution kinetics and dispersion stability of perovskite automotive catalysts

    by Veronica Di Battista, Kai Werle, Lars Michael Skjolding, Wendel Wohlleben, Anders Baun

    Tighter regulations on exhaust emission limits require more effective catalysts and here advanced materials (AdMa) play an increasingly important role. Perovskite-based catalysts are among the promising candidates. However, like other automotive catalysts, they contain metal elements of potential concern like nickel, cobalt and noble metals; hence, their likelihood to be released and their fate under environmentally relevant conditions must be assessed at the early stages of material development, so as to align with the goals of the EU Chemical Strategy for Sustainability. The aim of this study is to provide insights into the dissolution and agglomeration behaviour of perovskites in aqueous media with different ionic strengths and salt contents, as well as the influence of the presence of natural organic matter (NOM). The current OECD guidance document and testing guidelines (GD 318 and TG 318, respectively) for nanomaterial testing were applied to three different perovskite AdMa with a lanthanum–cobalt–nickel (LaCoNi) structure with and without doping with palladium or platinum. These tests resulted in a range of practical insights into the feasibility of this methodological cross-over as well as evidence on transferability and applicability to other case studies. Our findings rank the dissolution kinetics of these perovskites to lie between the two reference nanomaterials ZnO and BaSO4. Dissolution rates were found to be, respectively, for ZnO NM110, LaCoNi, and BaSO4 NM220: 0.13, 0.041, and 0.013 μg m−2 s. The ionic strength of the media used in this study did not seem to impact the overall leachable amount of metals (% w/w); however, we found that metal release was mostly incongruent and metal specific i.e., a lower lanthanum ratio with respect to either cobalt or nickel. The presence of NOM increased the dissolution of both benchmark materials; however, no strong influence on dissolution was observed for the perovskite materials. The dispersion stability of perovskites in solution was substantially increased by the presence of NOM and decreased by increased hardness in the test media. Finally, this study provides methodological insights and practical recommendations for testing the dissolution and dispersion stability in different media relevant for ecotoxicological testing and environmental risk assessment.


  • Open Access

    Effect of Exposure Concentration and Growth Conditions on the Association of Cerium Oxide Nanoparticles with Green Algae

    by Aiga Mackevica, Lyndsey Hendriks, Olga Meili-Borovinskaya, Anders Baun, Lars Michael Skjolding

    The increasing release of engineered nanoparticles (NPs) into aquatic ecosystems makes it crucial to understand the interactions of NPs with aquatic organisms, such as algae. In this study, the association of CeO2 NPs with unicellular algae (Raphidocelis subcapitata) and changes to the cellular elemental profile were investigated using three exposure concentrations (1, 50, and 1000 µg CeO2/L) at two different algal growth conditions—exponential and inhibited growth (1% glutaraldehyde). After a 24 h-exposure, algal suspensions were settled by gravity and CeO2-NP/algae association was analyzed by single-cell inductively coupled plasma quadrupole mass spectrometry (sc-ICP-QMS) and ICP time-of-flight MS (sc-ICP-TOFMS). Concurrent detection of the cellular fingerprint with cerium indicated NP association with algae (adsorption/uptake) and changes in the cellular elemental profiles. Less than 5% of cells were associated with NPs when exposed to 1 µg/L. For 50 µg/L exposures in growing and inhibited cell treatments, 4% and 16% of cells were associated with CeO2 NPs, respectively. ICP-TOFMS analysis made it possible to exclude cellular exudates associated with CeO2 NPs due to the cellular fingerprint. Growing and inhibited cells had different elemental profile changes following exposure to CeO2 NPs—e.g., growing cells had higher Mg and lower P contents independent of CeO2 concentration compared to inhibited cells.


  • Open Access

    Reducing the environmental impact of offshore H2S scavenging wastewater via hydrothermal oxidation

    by Nikolaos Montesantos, Lars M. Skjolding, Anders Baun, Jens Muff, Marco Maschietti


  • Open Access

    Critical review of the OSPAR risk-based approach for offshore-produced water discharges

    by Ann F. Nielsen, Anders Baun, Simon I. Andersen, Lars M. Skjolding

    The management of produced water (PW) discharges from offshore oil and gas installations in the North Atlantic is under the auspices of OSPAR (Oslo/Paris convention for Protection of the Marine Environment of the North-East Atlantic). In 2010, OSPAR introduced the risk-based approach (RBA) for PW management. The RBA includes a hazard assessment estimating PW ecotoxicity using two approaches: whole-effluent toxicity (WET) and substance-based (SB). Set against the framework of the WET and SB approach, we conducted a literature review on the magnitude and cause of PW ecotoxicity, respectively, and on the challenges of estimating these. A large variability in the reported magnitude of PW WET was found, with EC50 or LC50 values ranging from 100%, and a median of 11% (n = 301). Across the literature, metals, hydrocarbons, and production chemicals were identified as causing ecotoxicity. However, this review reveals how knowledge gaps on PW composition and high sample and species dependency of PW ecotoxicity make clear identification and generalization difficult. It also highlights how limitations regarding the availability and reliability of ecotoxicity data result in large uncertainties in the subsequent risk estimates, which is not adequately reflected in the RBA output (e.g., environmental impact factors). Thus, it is recommended to increase the focus on improving ecotoxicity data quality before further use in the RBA, and that WET should play a more pronounced role in the testing strategy. To increase the reliability of the SB approach, more attention should be paid to the actual composition of PW. Bioassay-directed chemical analysis, combining outcomes of WET and SB in toxicity identification evaluations, may hold the key to identifying drivers of ecotoxicity in PW. Finally, an uncertainty appraisal must be an integrated part of all reporting of risk estimates in the RBA, to avoid mitigation actions based on uncertainties rather than reliable ecotoxicity estimations. Integr Environ Assess Manag 2023;19:1172–1187. © 2022 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).