Weina Zhao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Weina Zhao has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Taicheng An
Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangdong-Hong Kong-Macao Joint Laboratory for Contaminants Exposure and Health, Institute of Environmental Health and Pollution Control, Guangdong University of Technology, Guangzhou, 510006, China
4 shared publications Chang Shen
Guangdong Key Laboratory of Environmental Catalysis and Health Risk Control, Guangdong‐Hong Kong‐Macao Joint Laboratory for Contaminants Exposure and Health, Institute of Environmental Health and Pollution Control, School of Environmental Science and Engineering Guangdong University of Technology Guangzhou China
3 shared publications- Guiying Li
Guangdong University of Technology
3 shared publications - Peng Yu
Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou, China
3 shared publications Guowei Yang
State Key Laboratory of Optoelectronic Materials and Technologies, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Nanotechnology Research Center, School of Materials Science and Engineering, Sun Yat-sen University, Guangzhou, PR China
2 shared publicationsWanfu Shen
State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin, PR China
2 shared publications
Latest Publications
- Open Access
- 25 January 2025
- Published by Wiley in Journal of Computational Chemistry
- Vol. 46 (3) , e70047
Computational Insights Into Corrosion Inhibition Mechanism: Dissociation of Imidazole on Iron Surface
Corrosion inhibitors are widely used to mitigate safety risks and economic losses in engineering, yet post‐adsorption processes remain underexplored. In this study, we employed density functional theory calculations with a periodic model to investigate the dissociation mechanisms of imidazole on the Fe(100) surface. Imidazole was found to adsorb optimally in a parallel orientation, with an adsorption energy of −0.88 eV. We explored two dissociation pathways: CH and NH bond cleavages and found CH dissociation having a lower activation barrier of 0.46 eV. Intriguingly, an alternative indirect route CH dissociation pathway involving a tilted intermediate state was found to be competitive. Both indirect and direct CH dissociation pathways are energetically more favorable than NH cleavage. Molecular dynamics simulations reveal that indirect CH dissociation occurs rapidly. This study proposes an alternative protective mechanism involving dissociated imidazole inhibitors, offering new insights for corrosion inhibitor design.
- 25 January 2025
- Published by Wiley in Journal of Computational Chemistry
- Vol. 46 (3) , e70047
Open AccessComputational Insights Into Corrosion Inhibition Mechanism: Dissociation of Imidazole on Iron Surface
Corrosion inhibitors are widely used to mitigate safety risks and economic losses in engineering, yet post‐adsorption processes remain underexplored. In this study, we employed density functional theory calculations with a periodic model to investigate the dissociation mechanisms of imidazole on the Fe(100) surface. Imidazole was found to adsorb optimally in a parallel orientation, with an adsorption energy of −0.88 eV. We explored two dissociation pathways: CH and NH bond cleavages and found CH dissociation having a lower activation barrier of 0.46 eV. Intriguingly, an alternative indirect route CH dissociation pathway involving a tilted intermediate state was found to be competitive. Both indirect and direct CH dissociation pathways are energetically more favorable than NH cleavage. Molecular dynamics simulations reveal that indirect CH dissociation occurs rapidly. This study proposes an alternative protective mechanism involving dissociated imidazole inhibitors, offering new insights for corrosion inhibitor design.
- 20 December 2024
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Nano
- Vol. 12 (2) , 1230-1239
Mechanistic insights into the adsorption of different types of VOCs on monolayer MoS2via first-principles approaches
The underlying mechanism that correlates adsorption energy with both the specific volatile organic compound (VOC) category and the carbon chain length on the MoS2 monolayer is elucidated through DFT calculations.
- 20 December 2024
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Nano
- Vol. 12 (2) , 1230-1239
Mechanistic insights into the adsorption of different types of VOCs on monolayer MoS2via first-principles approaches
The underlying mechanism that correlates adsorption energy with both the specific volatile organic compound (VOC) category and the carbon chain length on the MoS2 monolayer is elucidated through DFT calculations.
- Open Access
- 29 November 2024
- Published by Springer Nature in NPG Asia Materials
- Vol. 16 (1) , 1-10
Intrinsically anisotropic 1D NbTe4 for self-powered polarization-sensitive photodetection
Polarization-sensitive photodetection enhances scene information capture, crucial for modern optoelectronic devices. One-dimensional (1D) materials with intrinsic anisotropy, capable of directly sensing polarized light, are promising for such photodetectors. NbTe4, a quasi-1D transition metal tetra-chalcogenide, offers significant benefits for polarization-sensitive photodetection due to its structural anisotropy. Nonetheless, to date, the anisotropic properties of 1D NbTe4 have not been reported. Herein, NbTe4 nanobelts were synthesized via mechanical exfoliation from needle-like bulk crystals, and their anisotropic and optoelectronic properties were comprehensively studied. Angle-resolved polarized Raman spectroscopy, in conjunction with azimuth-dependent reflectance difference microscopy, confirmed that 1D NbTe₄ exhibits intrinsic structural and in-plane optical anisotropy. The 1D NbTe4 device demonstrated characteristic anisotropic photodetection behavior, achieving dichroic ratios of 1.16 at 671 nm and 1.25 at 1064 nm. Meanwhile, the device exhibits a pronounced photothermoelectric effect, conferring a broad spectral photoresponse ranging from visible to near-infrared wavelengths (532-1064 nm), with a rapid response time of 158 ms. This study demonstrates that NbTe4 inherently possesses in-plane anisotropy, making it a promising candidate for polarization-sensitive photodetection applications.
- 29 November 2024
- Published by Springer Nature in NPG Asia Materials
- Vol. 16 (1) , 1-10
Open AccessIntrinsically anisotropic 1D NbTe4 for self-powered polarization-sensitive photodetection
Polarization-sensitive photodetection enhances scene information capture, crucial for modern optoelectronic devices. One-dimensional (1D) materials with intrinsic anisotropy, capable of directly sensing polarized light, are promising for such photodetectors. NbTe4, a quasi-1D transition metal tetra-chalcogenide, offers significant benefits for polarization-sensitive photodetection due to its structural anisotropy. Nonetheless, to date, the anisotropic properties of 1D NbTe4 have not been reported. Herein, NbTe4 nanobelts were synthesized via mechanical exfoliation from needle-like bulk crystals, and their anisotropic and optoelectronic properties were comprehensively studied. Angle-resolved polarized Raman spectroscopy, in conjunction with azimuth-dependent reflectance difference microscopy, confirmed that 1D NbTe₄ exhibits intrinsic structural and in-plane optical anisotropy. The 1D NbTe4 device demonstrated characteristic anisotropic photodetection behavior, achieving dichroic ratios of 1.16 at 671 nm and 1.25 at 1064 nm. Meanwhile, the device exhibits a pronounced photothermoelectric effect, conferring a broad spectral photoresponse ranging from visible to near-infrared wavelengths (532-1064 nm), with a rapid response time of 158 ms. This study demonstrates that NbTe4 inherently possesses in-plane anisotropy, making it a promising candidate for polarization-sensitive photodetection applications.
- 23 October 2024
- Published by Elsevier in Chemical Physics
- Vol. 589
Enhanced VOCs adsorption on Group VIII transition metal-doped MoS2: A DFT study
- 23 October 2024
- Published by Elsevier in Chemical Physics
- Vol. 589
Enhanced VOCs adsorption on Group VIII transition metal-doped MoS2: A DFT study
- Open Access
- 27 April 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Bioinspired artificial spider silk photocatalyst for the high-efficiency capture and inactivation of bacteria aerosols
Bioaerosol can cause the spread of disease, and therefore, capture and inactivation of bioaerosols is desirable. However, filtration systems can easily become blocked, and are often unable to inactivate the bioaerosol once it is captured. Herein, we reported a bioinspired artificial spider silk (ASS) photocatalyst, consisting of a periodic spindle structure of TiO2 on nylon fiber that can efficiently capture and concentrate airborne bacteria, followed by photocatalytic inactivation in situ, without a power-supply exhaust system. The ASS photocatalyst exhibits a higher capture capacity than the nylon fiber substrate and a photocatalytic inactivation efficiency of 99.99% obtained under 4 h irradiation. We found that the capture capacity of the ASS photocatalyst can be mainly attributed to the synergistic effects of hydrophilicity, Laplace pressure differences caused by the size of the spindle knots and surface energy gradients induced by surface roughness. The bacteria captured by the ASS photocatalyst are inactivated by photocatalysis within droplets or at the air/photocatalyst interfaces. This strategy paves the way for constructing materials for bioaerosol purification.
- 27 April 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Open AccessBioinspired artificial spider silk photocatalyst for the high-efficiency capture and inactivation of bacteria aerosols
Bioaerosol can cause the spread of disease, and therefore, capture and inactivation of bioaerosols is desirable. However, filtration systems can easily become blocked, and are often unable to inactivate the bioaerosol once it is captured. Herein, we reported a bioinspired artificial spider silk (ASS) photocatalyst, consisting of a periodic spindle structure of TiO2 on nylon fiber that can efficiently capture and concentrate airborne bacteria, followed by photocatalytic inactivation in situ, without a power-supply exhaust system. The ASS photocatalyst exhibits a higher capture capacity than the nylon fiber substrate and a photocatalytic inactivation efficiency of 99.99% obtained under 4 h irradiation. We found that the capture capacity of the ASS photocatalyst can be mainly attributed to the synergistic effects of hydrophilicity, Laplace pressure differences caused by the size of the spindle knots and surface energy gradients induced by surface roughness. The bacteria captured by the ASS photocatalyst are inactivated by photocatalysis within droplets or at the air/photocatalyst interfaces. This strategy paves the way for constructing materials for bioaerosol purification.
- Open Access
Atomically Thin 2D van der Waals Magnetic Materials: Fabrications, Structure, Magnetic Properties and Applications
Two-dimensional (2D) van der Waals (vdW) magnetic materials are considered to be ideal candidates for the fabrication of spintronic devices because of their low dimensionality, allowing the quantization of electronic states and more degrees of freedom for device modulation. With the discovery of few-layer Cr2Ge2Te6 and monolayer CrI3 ferromagnets, the magnetism of 2D vdW materials is becoming a research focus in the fields of material science and physics. In theory, taking the Heisenberg model with finite-range exchange interactions as an example, low dimensionality and ferromagnetism are in competition. In other words, it is difficult for 2D materials to maintain their magnetism. However, the introduction of anisotropy in 2D magnetic materials enables the realization of long-range ferromagnetic order in atomically layered materials, which may offer new effective means for the design of 2D ferromagnets with high Curie temperature. Herein, current advances in the field of 2D vdW magnetic crystals, as well as intrinsic and induced ferromagnetism or antiferromagnetism, physical properties, device fabrication, and potential applications, are briefly summarized and discussed.
Open AccessAtomically Thin 2D van der Waals Magnetic Materials: Fabrications, Structure, Magnetic Properties and Applications
Two-dimensional (2D) van der Waals (vdW) magnetic materials are considered to be ideal candidates for the fabrication of spintronic devices because of their low dimensionality, allowing the quantization of electronic states and more degrees of freedom for device modulation. With the discovery of few-layer Cr2Ge2Te6 and monolayer CrI3 ferromagnets, the magnetism of 2D vdW materials is becoming a research focus in the fields of material science and physics. In theory, taking the Heisenberg model with finite-range exchange interactions as an example, low dimensionality and ferromagnetism are in competition. In other words, it is difficult for 2D materials to maintain their magnetism. However, the introduction of anisotropy in 2D magnetic materials enables the realization of long-range ferromagnetic order in atomically layered materials, which may offer new effective means for the design of 2D ferromagnets with high Curie temperature. Herein, current advances in the field of 2D vdW magnetic crystals, as well as intrinsic and induced ferromagnetism or antiferromagnetism, physical properties, device fabrication, and potential applications, are briefly summarized and discussed.
- 22 October 2021
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Nano
- Vol. 8 (12) , 3735-3745
Atomically dispersed Pd sites on Ti-SBA-15 for efficient catalytic combustion of typical gaseous VOCs
The development of atomically dispersed Pd site catalysts is attractive for maximizing metal utilization and reducing the dosage of Pd in the catalytic combustion of atmospheric volatile organic compounds (VOCs). Herein, we developed a scalable and economically feasible approach to prepare atomically dispersed palladium (Pd) sites on titanium substituted ordered mesoporous silica (Pd SSC/Ti-SBA-15) with an extremely low Pd loading (0.04 wt%). Characterization by AC-HAADF-STEM and in situ CO DRIFTS revealed the existence of isolated Pd sites in Pd SSC/Ti-SBA-15, and the Py-DRIFTS results demonstrated that the acidity of the catalyst was improved by doping with a small amount of Ti. The as-prepared Pd SSC/Ti-SBA-15 exhibited excellent catalytic activity (T90 = 270 °C) for cyclohexane combustion, exceeding that of Pd nanoparticles supported on Ti-SBA-15 with a high Pd loading amount (0.5 wt%) (T90 = 370 °C) and Pd SSC/SBA-15 without Ti substitution (T90 = 420 °C). Furthermore, Pd SSC/Ti-SBA-15 displayed remarkable catalytic activity toward cyclohexane, n-hexane and styrene combustion and maintained 100% mineralizaion after 10 h. The excellent catalytic activity of the resultant Pd SSC/Ti-SBA-15 catalyst might be attributed to the considerable amount of acid sites derived from Ti substitution for promoting VOC adsorption and the maximized Pd utilization realized by atomic Pd sites supported on Ti-SBA-15. This work provides a new route for the development of low-cost and high-performance Pd-based catalysts for VOC abatement.
- 22 October 2021
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Nano
- Vol. 8 (12) , 3735-3745
Atomically dispersed Pd sites on Ti-SBA-15 for efficient catalytic combustion of typical gaseous VOCs
The development of atomically dispersed Pd site catalysts is attractive for maximizing metal utilization and reducing the dosage of Pd in the catalytic combustion of atmospheric volatile organic compounds (VOCs). Herein, we developed a scalable and economically feasible approach to prepare atomically dispersed palladium (Pd) sites on titanium substituted ordered mesoporous silica (Pd SSC/Ti-SBA-15) with an extremely low Pd loading (0.04 wt%). Characterization by AC-HAADF-STEM and in situ CO DRIFTS revealed the existence of isolated Pd sites in Pd SSC/Ti-SBA-15, and the Py-DRIFTS results demonstrated that the acidity of the catalyst was improved by doping with a small amount of Ti. The as-prepared Pd SSC/Ti-SBA-15 exhibited excellent catalytic activity (T90 = 270 °C) for cyclohexane combustion, exceeding that of Pd nanoparticles supported on Ti-SBA-15 with a high Pd loading amount (0.5 wt%) (T90 = 370 °C) and Pd SSC/SBA-15 without Ti substitution (T90 = 420 °C). Furthermore, Pd SSC/Ti-SBA-15 displayed remarkable catalytic activity toward cyclohexane, n-hexane and styrene combustion and maintained 100% mineralizaion after 10 h. The excellent catalytic activity of the resultant Pd SSC/Ti-SBA-15 catalyst might be attributed to the considerable amount of acid sites derived from Ti substitution for promoting VOC adsorption and the maximized Pd utilization realized by atomic Pd sites supported on Ti-SBA-15. This work provides a new route for the development of low-cost and high-performance Pd-based catalysts for VOC abatement.
- 24 July 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (35) , 2102541
Penta‐PdPSe: A New 2D Pentagonal Material with Highly In‐Plane Optical, Electronic, and Optoelectronic Anisotropy
Due to their low‐symmetry lattice characteristics and intrinsic in‐plane anisotropy, 2D pentagonal materials, a new class of 2D materials composed entirely of pentagonal atomic rings, are attracting increasing research attention. However, the existence of these 2D materials has not been proven experimentally until the recent discovery of PdSe2. Herein, penta‐PdPSe, a new 2D pentagonal material with a novel low‐symmetry puckered pentagonal structure, is introduced to the 2D family. Interestingly, a peculiar polyanion of [SePPSe]4− is discovered in this material, which is the biggest polyanion in 2D materials yet discovered. Strong intrinsic in‐plane anisotropic behavior endows penta‐PdPSe with highly anisotropic optical, electronic, and optoelectronic properties. Impressively, few‐layer penta‐PdPSe‐based phototransistor not only achieves excellent electronic performances, a moderate electron mobility of 21.37 cm2 V−1 s−1 and a high on/off ratio of up to 108, but it also has a high photoresponsivity of ≈5.07 × 103 A W−1 at 635 nm, which is ascribed to the photogating effect. More importantly, penta‐PdPSe also exhibits a large anisotropic conductance (σmax/σmax = 3.85) and responsivity (Rmax/Rmin = 6.17 at 808 nm), superior to most 2D anisotropic materials. These findings make penta‐PdPSe an ideal material for the design of next‐generation anisotropic devices.
- 24 July 2021
- Published by Wiley in Advanced Materials
- Vol. 33 (35) , 2102541
Penta‐PdPSe: A New 2D Pentagonal Material with Highly In‐Plane Optical, Electronic, and Optoelectronic Anisotropy
Due to their low‐symmetry lattice characteristics and intrinsic in‐plane anisotropy, 2D pentagonal materials, a new class of 2D materials composed entirely of pentagonal atomic rings, are attracting increasing research attention. However, the existence of these 2D materials has not been proven experimentally until the recent discovery of PdSe2. Herein, penta‐PdPSe, a new 2D pentagonal material with a novel low‐symmetry puckered pentagonal structure, is introduced to the 2D family. Interestingly, a peculiar polyanion of [SePPSe]4− is discovered in this material, which is the biggest polyanion in 2D materials yet discovered. Strong intrinsic in‐plane anisotropic behavior endows penta‐PdPSe with highly anisotropic optical, electronic, and optoelectronic properties. Impressively, few‐layer penta‐PdPSe‐based phototransistor not only achieves excellent electronic performances, a moderate electron mobility of 21.37 cm2 V−1 s−1 and a high on/off ratio of up to 108, but it also has a high photoresponsivity of ≈5.07 × 103 A W−1 at 635 nm, which is ascribed to the photogating effect. More importantly, penta‐PdPSe also exhibits a large anisotropic conductance (σmax/σmax = 3.85) and responsivity (Rmax/Rmin = 6.17 at 808 nm), superior to most 2D anisotropic materials. These findings make penta‐PdPSe an ideal material for the design of next‐generation anisotropic devices.
- 6 August 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (39) , 20363-20372
Evaluation procedure of photocatalysts for VOCs degradation from the view of density functional theory calculations: g-C3N4 dots/graphene as an example
Various techniques have been utilized in experiments to evaluate the performance of photocatalysts and to understand the corresponding catalytic mechanism. However, it is still challenging to demonstrate the phenomenon in detail during the catalytic process in experiments to fundamentally understand the catalytic mechanism. Density function theory (DFT) is an excellent technique to solve this problem at the level of electrons and atoms. However, the evaluation procedure for photocatalysts based on DFT calculations was unclear. Thus, in this work, we propose an evaluation procedure for photocatalysts for the degradation of volatile organic compounds (VOCs) from the point of view of DFT calculations through the following aspects: (i) the band structure of photocatalysts, including the band gap, capability of photoadsorption and the positions of the conduction band (CB) and valence band (VB); (ii) the adsorption of H2O, O2 or other oxidants; (iii) the adsorption of pollutants; (iv) the reaction pathway for pollutant degradation. To demonstrate the application of the proposed evaluation procedure, g-C3N4 dots/graphene is taken as an example to evaluate its photocatalytic performance. The results show that g-C3N4 dots/graphene has enhanced visible light absorption with significantly reduced height for photoelectron excitation and the photoelectron migrates between the parts of the heterostructure, from the valence band of the g-C3N4 dots to the graphene layer, and then to the conduction band of the g-C3N4 dots, which promotes light adsorption and induces the generation of electron–hole pairs with a low recombination rate. In addition, both the adsorbed H2O and O2 have strong interactions with g-C3N4 dots/graphene, inducing activation to form ˙OH and ˙O2 − radicals to attack and degrade the adsorbed VOCs. Therefore, a procedure to evaluate the performance of photocatalysts for VOCs degradation based on DFT calculations is proposed in this work, and the evaluation procedure is successfully applied to predict the high photocatalytic performance of g-C3N4 dots/graphene, where a unique photoelectron excitation pathway is also demonstrated within the heterostructure.
- 6 August 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (39) , 20363-20372
Evaluation procedure of photocatalysts for VOCs degradation from the view of density functional theory calculations: g-C3N4 dots/graphene as an example
Various techniques have been utilized in experiments to evaluate the performance of photocatalysts and to understand the corresponding catalytic mechanism. However, it is still challenging to demonstrate the phenomenon in detail during the catalytic process in experiments to fundamentally understand the catalytic mechanism. Density function theory (DFT) is an excellent technique to solve this problem at the level of electrons and atoms. However, the evaluation procedure for photocatalysts based on DFT calculations was unclear. Thus, in this work, we propose an evaluation procedure for photocatalysts for the degradation of volatile organic compounds (VOCs) from the point of view of DFT calculations through the following aspects: (i) the band structure of photocatalysts, including the band gap, capability of photoadsorption and the positions of the conduction band (CB) and valence band (VB); (ii) the adsorption of H2O, O2 or other oxidants; (iii) the adsorption of pollutants; (iv) the reaction pathway for pollutant degradation. To demonstrate the application of the proposed evaluation procedure, g-C3N4 dots/graphene is taken as an example to evaluate its photocatalytic performance. The results show that g-C3N4 dots/graphene has enhanced visible light absorption with significantly reduced height for photoelectron excitation and the photoelectron migrates between the parts of the heterostructure, from the valence band of the g-C3N4 dots to the graphene layer, and then to the conduction band of the g-C3N4 dots, which promotes light adsorption and induces the generation of electron–hole pairs with a low recombination rate. In addition, both the adsorbed H2O and O2 have strong interactions with g-C3N4 dots/graphene, inducing activation to form ˙OH and ˙O2 − radicals to attack and degrade the adsorbed VOCs. Therefore, a procedure to evaluate the performance of photocatalysts for VOCs degradation based on DFT calculations is proposed in this work, and the evaluation procedure is successfully applied to predict the high photocatalytic performance of g-C3N4 dots/graphene, where a unique photoelectron excitation pathway is also demonstrated within the heterostructure.
- Open Access
- 8 January 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (3) , 1261-1270
A high-performance trace level acetone sensor using an indispensable V 4 C 3 T x MXene
A high-performance acetone sensor utilizing an emerging indispensable V 4 C 3 T x MXene is described via combining experimental results with theoretical study.
- 8 January 2020
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 10 (3) , 1261-1270
Open AccessA high-performance trace level acetone sensor using an indispensable V 4 C 3 T x MXene
A high-performance acetone sensor utilizing an emerging indispensable V 4 C 3 T x MXene is described via combining experimental results with theoretical study.