Jianyu Tan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jianyu Tan has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
C. C. Wang
School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China
4 shared publications- Linhua Liu
Shandong University
4 shared publications Qingzhi Lai
Harbin Inst Technol, Sch New Energy, Weihai 264209, Peoples R China
4 shared publications- Fangzhou Wang
School of New Energy, Harbin Institute of Technology at Weihai, 2, Wenhua Road, Weihai 264209, P. R. China
3 shared publications Lanqing Qiao
3 shared publicationsYinmo Xie
Harbin Inst Technol, Sch New Energy, Weihai 264209, Peoples R China
3 shared publications
Latest Publications
- 1 January 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (1)
Study on wind prediction over coastal complex terrain with a refined weather research and forecasting-computational fluid dynamics model
Accurate wind prediction over complex coastal terrain is essential for mitigating the stochasticity and uncertainty of wind energy in power systems. This study focuses on day-ahead hourly wind speed forecasting for the coastal region around meteorological station no. 45032 in Hong Kong and develops a multiscale prediction methodology that combines a mesoscale Weather Research and Forecasting (WRF) model with a microscale computational fluid dynamics (CFD) model. Based on high-resolution WRF forecasts, the coupling framework dynamically assigns CFD open boundary conditions across multiple grid nodes and directions and incorporates momentum source terms and a relaxation zone in the CFD model to address inconsistencies arising from dynamical downscaling and turbulence parameterization. Results show that high-resolution WRF reduces the day-ahead hourly mean absolute percentage error (MAPE) from 37.2% to 22.8%, with the coupled WRF–CFD model further lowering the MAPE to 14.8%. Furthermore, the coupled WRF–CFD approach accurately captures terrain-induced wind variations, including the speed-up effect over ridges and the sheltering effect in valleys. The proposed forecasting framework achieves both high predictive accuracy and good timeliness, providing a practical and generalizable solution for refined wind resource assessment and wind farm planning in complex terrain.
- 1 January 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (1)
Study on wind prediction over coastal complex terrain with a refined weather research and forecasting-computational fluid dynamics model
Accurate wind prediction over complex coastal terrain is essential for mitigating the stochasticity and uncertainty of wind energy in power systems. This study focuses on day-ahead hourly wind speed forecasting for the coastal region around meteorological station no. 45032 in Hong Kong and develops a multiscale prediction methodology that combines a mesoscale Weather Research and Forecasting (WRF) model with a microscale computational fluid dynamics (CFD) model. Based on high-resolution WRF forecasts, the coupling framework dynamically assigns CFD open boundary conditions across multiple grid nodes and directions and incorporates momentum source terms and a relaxation zone in the CFD model to address inconsistencies arising from dynamical downscaling and turbulence parameterization. Results show that high-resolution WRF reduces the day-ahead hourly mean absolute percentage error (MAPE) from 37.2% to 22.8%, with the coupled WRF–CFD model further lowering the MAPE to 14.8%. Furthermore, the coupled WRF–CFD approach accurately captures terrain-induced wind variations, including the speed-up effect over ridges and the sheltering effect in valleys. The proposed forecasting framework achieves both high predictive accuracy and good timeliness, providing a practical and generalizable solution for refined wind resource assessment and wind farm planning in complex terrain.
- 4 June 2024
- Published by Elsevier in Chemical Engineering Science
- Vol. 298
Effects of foam cathode electrode structure on alkaline water electrolysis for hydrogen production
- 4 June 2024
- Published by Elsevier in Chemical Engineering Science
- Vol. 298
Effects of foam cathode electrode structure on alkaline water electrolysis for hydrogen production
- Open Access
- 1 February 2024
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 61 (9) , 1155-1168
A simulation research on thermal-pressure coupling loading of a 1:3.2 containment model
- 1 February 2024
- Published by Taylor & Francis in Journal of Nuclear Science and Technology
- Vol. 61 (9) , 1155-1168
Open AccessA simulation research on thermal-pressure coupling loading of a 1:3.2 containment model
- Open Access
- 22 December 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (1) , 1683-1694
Optimization of Flow Channels in a PEM Fuel Cell Based on a Multiobjective Evaluation
Proton exchange membrane fuel cells (PEMFCs) are known for their cleanliness and high efficiency. However, the limited energy density and high cost are the main obstacles to this technology. This study aims to overcome these challenges and enhance the overall performance of the PEMFC. Five types of PEMFCs with different blockages are proposed and simulated in this study. Afterward, the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method is performed as a multiobjective evaluation. This study shows that the nozzle effect in the channel enhances the mass transfer of PEMFC and improves water and thermal management, resulting in a reduction of liquid water by up to 35.8%. The blockages benefit the output performance of the PEMFC. For example, the elliptical blockage shows the highest improvement in electrochemical conversion efficiency at 3.42%. The TOPSIS examines indices of power, exergy, economy, environment, and water and thermal management. The multiobjective evaluation shows that the elliptical blockage is more beneficial for PEMFC. This study provides an optimized design of the PEMFC flow channel and a new perspective to evaluate the structural improvement of PEMFC.
- 22 December 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (1) , 1683-1694
Open AccessOptimization of Flow Channels in a PEM Fuel Cell Based on a Multiobjective Evaluation
Proton exchange membrane fuel cells (PEMFCs) are known for their cleanliness and high efficiency. However, the limited energy density and high cost are the main obstacles to this technology. This study aims to overcome these challenges and enhance the overall performance of the PEMFC. Five types of PEMFCs with different blockages are proposed and simulated in this study. Afterward, the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) method is performed as a multiobjective evaluation. This study shows that the nozzle effect in the channel enhances the mass transfer of PEMFC and improves water and thermal management, resulting in a reduction of liquid water by up to 35.8%. The blockages benefit the output performance of the PEMFC. For example, the elliptical blockage shows the highest improvement in electrochemical conversion efficiency at 3.42%. The TOPSIS examines indices of power, exergy, economy, environment, and water and thermal management. The multiobjective evaluation shows that the elliptical blockage is more beneficial for PEMFC. This study provides an optimized design of the PEMFC flow channel and a new perspective to evaluate the structural improvement of PEMFC.
- Open Access
- 5 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (24) , 12996
Experimental Study of Discharging Magnesium-Dissolved Oxygen Seawater Batteries with Various Binder Ratios
Magnesium-dissolved oxygen seawater batteries have open structures and flow seawater as electrolytes. These two features attract much attention. The cathode electrode is one of the key components that affect the performance of seawater batteries. In this study, seawater batteries with carbon cathodes made from three commercial carbons were investigated and discussed. The porous structure of the cathode was adjusted by changing the mass ratio between polytetrafluoroethylene (PTFE) and carbon materials. The binder ratios range from 10% to 50%. The structure of the different porous carbon cathodes was characterized, and the discharging performance was analyzed. Results showed that the number of pores with diameters of 2–10 nm decreased as the PTFE ratio increased. Meanwhile, as the PTFE ratio increased from 10% to 50%, the seawater battery discharging voltage and capacity were first inhibited when the PTFE ratio was less than 20% but then promoted. It revealed that a balance should be achieved between the number of reaction sites and the paths for oxygen transfer. Moreover, the oxygen transfer in the porous electrode is more important for batteries working in seawater. This study practically investigates seawater batteries with various PTFE binder ratios and provides a reference for the design of magnesium-dissolved oxygen seawater batteries.
- 5 December 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (24) , 12996
Open AccessExperimental Study of Discharging Magnesium-Dissolved Oxygen Seawater Batteries with Various Binder Ratios
Magnesium-dissolved oxygen seawater batteries have open structures and flow seawater as electrolytes. These two features attract much attention. The cathode electrode is one of the key components that affect the performance of seawater batteries. In this study, seawater batteries with carbon cathodes made from three commercial carbons were investigated and discussed. The porous structure of the cathode was adjusted by changing the mass ratio between polytetrafluoroethylene (PTFE) and carbon materials. The binder ratios range from 10% to 50%. The structure of the different porous carbon cathodes was characterized, and the discharging performance was analyzed. Results showed that the number of pores with diameters of 2–10 nm decreased as the PTFE ratio increased. Meanwhile, as the PTFE ratio increased from 10% to 50%, the seawater battery discharging voltage and capacity were first inhibited when the PTFE ratio was less than 20% but then promoted. It revealed that a balance should be achieved between the number of reaction sites and the paths for oxygen transfer. Moreover, the oxygen transfer in the porous electrode is more important for batteries working in seawater. This study practically investigates seawater batteries with various PTFE binder ratios and provides a reference for the design of magnesium-dissolved oxygen seawater batteries.
- Open Access
- 26 January 2023
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 42
The effect of pulse heating on saturated boiling heat transfer in rough surfaces
- 26 January 2023
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 42
Open AccessThe effect of pulse heating on saturated boiling heat transfer in rough surfaces
- 9 May 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (5) , 5473-5483
Effects of Porous Structure on Oxygen Mass Transfer in Air Cathodes of Nonaqueous Metal–Air Batteries: A Mini-review
- 9 May 2022
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 5 (5) , 5473-5483
Effects of Porous Structure on Oxygen Mass Transfer in Air Cathodes of Nonaqueous Metal–Air Batteries: A Mini-review
- Open Access
- 7 May 2022
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 35
Numerical investigation on boiling mechanism under periodic wave pulse heating by lattice Boltzmann
- 7 May 2022
- Published by Elsevier in Case Studies in Thermal Engineering
- Vol. 35
Open AccessNumerical investigation on boiling mechanism under periodic wave pulse heating by lattice Boltzmann
- 5 August 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (23) , 6902-6909
Multiband directional reflectance properties of oil-in-water emulsion: application for identification of oil spill types
Reflection characteristics play a critical role in identifying, assessing, and responding to different types of oil spills. In this paper, we prepared three concentrations of oil-in-water (OW) emulsions and measured their directional reflection properties in the visible and near-IR range. The spectral differences in reflectance between OW emulsions and oil films were analyzed. Furthermore, the AVIRIS and Landsat 7 images collected over the oil spill accident in the Gulf of Mexico were used to demonstrate the feasibility to apply the experimental results in the identification of oil spill types. The results show that OW emulsions and oil films can be well discriminated in remote sensing images based on their reflectance spectral differences. The OW emulsion is mainly distributed in strips along the edge of the oil film, which is useful to delineate the spill outline and calculate the polluted area.
- 5 August 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (23) , 6902-6909
Multiband directional reflectance properties of oil-in-water emulsion: application for identification of oil spill types
Reflection characteristics play a critical role in identifying, assessing, and responding to different types of oil spills. In this paper, we prepared three concentrations of oil-in-water (OW) emulsions and measured their directional reflection properties in the visible and near-IR range. The spectral differences in reflectance between OW emulsions and oil films were analyzed. Furthermore, the AVIRIS and Landsat 7 images collected over the oil spill accident in the Gulf of Mexico were used to demonstrate the feasibility to apply the experimental results in the identification of oil spill types. The results show that OW emulsions and oil films can be well discriminated in remote sensing images based on their reflectance spectral differences. The OW emulsion is mainly distributed in strips along the edge of the oil film, which is useful to delineate the spill outline and calculate the polluted area.