CSChandan Samanta

Chandan Samanta

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chandan Samanta has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Nanomechanical vibrational response from electrical mixing measurements

    by C. Samanta, D. A. Czaplewski, S. L. De Bonis, C. B. Møller, R. Tormo-Queralt, C. S. Miller, Y. Jin, F. Pistolesi, A. Bachtold

    Driven nanomechanical resonators based on low-dimensional materials are routinely and efficiently detected with electrical mixing measurements. However, the measured signal is a non-trivial combination of the mechanical eigenmode displacement and an electrical contribution, which makes the extraction of the driven mechanical response challenging. Here, we report a simple yet reliable method to extract solely the driven mechanical vibrations by eliminating the contribution of pure electrical origin. This enables us to measure the spectral mechanical response as well as the driven quadratures of motion. This method is crucial for nanomechanical vibrations in the nonlinear regime, since the shape of the mechanical response depends on the physics at work. We further show how to calibrate the measured signal into units of displacement. Our method marks a key step forward in the study of nanoelectromechanical resonators based on low-dimensional materials in the nonlinear regime.


  • Open Access

    Nanomechanical vibrational response from electrical mixing measurements

    by C. Samanta, D. A. Czaplewski, S. L. De Bonis, C. B. Moller, R. Tormo Queralt, C. S. Miller, Y. Jin, F. Pistolesi, A. Bachtold

    Driven nanomechanical resonators based on low-dimensional materials are routinely and efficiently detected with electrical mixing measurements. However, the measured signal is a non-trivial combination of the mechanical eigenmode displacement and an electrical contribution, which makes the extraction of the driven mechanical response challenging. Here, we report a simple yet reliable method to extract solely the driven mechanical vibrations by eliminating the contribution of pure electrical origin. This enables us to measure the spectral mechanical response as well as the driven quadratures of motion. We further show how to calibrate the measured signal into units of displacement. Additionally, we utilize the pure electrical contribution to directly determine the effective mass of the measured mechanical mode. Our method marks a key step forward in the study of nanoelectromechanical resonators based on low-dimensional materials in both the linear and the nonlinear regime.

  • Open Access

    Cooling and self-oscillation in a nanotube electromechanical resonator

    by C. Urgell, W. Yang, S. L. De Bonis, C. Samanta, M. J. Esplandiu, Q. Dong, Y. Jin, A. Bachtold


  • Optical gradient force for tuning, actuation, and manipulation of nonlinearity in graphene nanomechanical resonator

    by Aneesh Dash, Chandan Samanta, Praveen Ranganath, Shankar Kumar Selvaraja, Akshay Naik

    Graphene nano-mechanical resonators integrated over waveguides provide a powerful sensing platform based on the interaction of graphene with the evanescent wave. An integrated actuation scheme that does not compromise this interaction is required for optimal usage of the ultra-sensitive platform. Conventional electrical and optical actuation techniques are not favorable towards efficient utilization of the near-field interaction. We propose tuning and actuation of these resonators using on-chip optical gradient force due to the guided wave as an alternative to these conventional techniques. We have used the fundamental quasi-TM optical mode in a silicon waveguide in a finite-element model. We obtain a force–distribution that is spatially correlated with the fundamental mechanical mode of the graphene nano-mechanical resonator. We demonstrate that for an evanescent continuous-wave (CW) optical power of 8 μ W, the resonant frequency of the device can be tuned by about 24.5%. With an intensity-modulated optical power ≤0.1 μ W, the mechanical mode can be driven to nonlinearity. We also demonstrate cancellation of the Duffing nonlinearity at a CW power of 5.4 μ W, which can be used to improve the linear dynamic range of vibration. The distributed optical gradient force can produce linear resonant amplitudes that are 50% higher than those obtained using conventional actuation schemes. This actuation scheme is robust against fluctuations in the evanescent optical power and in the refractive index of the side-cladding of the waveguide. This ensures minimal cross-talk from the optical mode to the mechanical mode in nano-mechanical sensing applications.


  • The effect of strain on effective Duffing nonlinearity in the CVD-MoS2 resonator

    by Chandan Samanta, Nishta Arora, Kranthi Kumar V., Srinivasan Raghavan, A. K. Naik

    We use frequency response of CVD-MoS2 resonator as a probe to estimate the linear thermal expansion coefficient of the material and evaluate the effect of strain on the effective Duffing nonlinearity.


  • Tuning of geometric nonlinearity in ultrathin nanoelectromechanical systems

    by Chandan Samanta, Nishta Arora, A. K. Naik

    Nonlinearities in nanoelectromechanical systems (NEMS) play a vital role in dynamics of the device. Clear understanding of nonlinearities and ability to tune and manipulate them to enhance the performance are crucial for applications with these devices. Here, we utilize an electrostatic mechanism to tune the geometric nonlinearity of an atomically thin NEMS. The exquisite tuning enables us to demonstrate hardening, softening, and mixed nonlinear responses in the device. The electrostatic tuning over the nonlinearity is utilized to effectively nullify Duffing nonlinearity in a specific regime. The observed mixed nonlinear response is the result of cross coupling between strong quadratic and quartic nonlinearities, an aspect explained by method of multiple scale analysis.


  • Open Access

    Ultrasensitive Displacement Noise Measurement of Carbon Nanotube Mechanical Resonators

    by S. L. de Bonis, C. Urgell, W. Yang, C. Samanta, A. Noury, J. Vergara-Cruz, Q. Dong, Y. Jin, A. Bachtold

    Mechanical resonators based on a single carbon nanotube are exceptional sensors of mass and force. The force sensitivity in these ultralight resonators is often limited by the noise in the detection of the vibrations. Here, we report on an ultrasensitive scheme based on a RLC resonator and a low-temperature amplifier to detect nanotube vibrations. We also show a new fabrication process of electromechanical nanotube resonators to reduce the separation between the suspended nanotube and the gate electrode down to ∼150 nm. These advances in detection and fabrication allow us to reach displacement sensitivity. Thermal vibrations cooled cryogenically at 300 mK are detected with a signal-to-noise ratio as high as 17 dB. We demonstrate force sensitivity, which is the best force sensitivity achieved thus far with a mechanical resonator. Our work is an important step toward imaging individual nuclear spins and studying the coupling between mechanical vibrations and electrons in different quantum electron transport regimes.


  • Nonlinear mode coupling and internal resonances in MoS2 nanoelectromechanical system

    by C. Samanta, P. R. Yasasvi Gangavarapu, A. K. Naik

    Atomically thin two dimensional (2D) layered materials have emerged as a new class of material for nanoelectromechanical systems (NEMS) due to their extraordinary mechanical properties and ultralow mass density. Among them, graphene has been the material of choice for nanomechanical resonator. However, recent interest in 2D chalcogenide compounds has also spurred research in using materials such as MoS2 for the NEMS applications. As the dimensions of devices fabricated using these materials shrink down to atomically thin membrane, strain and nonlinear effects have become important. A clear understanding of the nonlinear effects and the ability to manipulate them is essential for next generation sensors. Here, we report on all electrical actuation and detection of few-layer MoS2 resonator. The ability to electrically detect multiple modes and actuate the modes deep into the nonlinear regime enables us to probe the nonlinear coupling between various vibrational modes. The modal coupling in our device is strong enough to detect three distinct internal resonances.


  • Domain growth of carbon nanotubes assisted by dewetting of thin catalyst precursor films

    by Alok Kumar Srivastava, Priyanka Sachan, Chandan Samanta, Kingsuk Mukhopadhyay, Ashutosh Sharma


  • Catalyst and its diameter dependent growth kinetics of CVD grown GaN nanowires

    by Chandan Samanta, D. Sathish Chander, J. Ramkumar, S. Dhamodaran