Elisabetta Benazzi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Elisabetta Benazzi has a total of 56 co-authors. Here are the top co-authors by number of shared publications:
Carlo Alberto Bignozzi
5 shared publicationsLaura Casarin
Dipartimento Scienze Chimiche e Farmaceutiche, Università di Ferrara , Via F. di Mortara, 44121 Ferrara, Italy
4 shared publicationsRita Boaretto
Univ Ferrara, Dept Chem & Pharmaceut Sci, Via Fossato di Mortara 17, I-44121 Ferrara, Italy
3 shared publicationsRoberto Argazzi
Dept. of Chemical and Pharmaceutical Sciences, University of Ferrara, Via Borsari 46, 44121 Ferrara, Italy
3 shared publicationsStefano Caramori
3 shared publications- Stefano Caramori
Department of Chemical and Pharmaceutical Sciences, University of Ferrara, Via L. Borsari 46, 44121, Ferrara, Italy
3 shared publications
Latest Publications
- Open Access
- 8 July 2025
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 6 (11)
Organic‐Inorganic Photosynthetic Interfaces Built on Intertwined WO 3 Nanosheets for Enhanced HBr/H 2 O Photoanodic Oxidations
Using a sacrificial ZnO template, this study report the fabrication of fluorine‐doped tin oxide (FTO)‐based photoanodes displaying a porous network of interconnected 3D‐tungsten oxide nanosheets (WO 3 3D‐NS), with diameter/thickness distribution respectively in the range 0.20–0.94 μm and 10–40 nm, leading to record aspect ratios (≈100) with respect to literature benchmarks (≈10) and dominant {001} facets. WO 3 3D‐NS provide an ideal platform for shaping hybrid photosynthetic interfaces by deposition of supramolecular perylenebisimide polymers (PBI n ). The combined WO 3 3D‐NS|PBI n are probed for photoelectrochemical HBr splitting using low energy photons (λ > 450 nm), with up to a 83% increase of the state‐of‐the‐art performance based on WO 3 ‐analogs (J > 0.3 mA cm −2 at 0.85 V vs. reversible hydrogen electrode (RHE)). Structure versus reactivity comparison with WO 3 microplates (WO 3 MP) and inverse opal (WO 3 IO) points to a favorable enhanced active surface area of WO 3 3D‐NS exposing dominant {001} facets, which promote PBI sensitization and charge transfer at the photoanode|electrolyte interface. Building on this technology, a >50% improvement of photoanodic water splitting is achieved using WO 3 3D‐NS photoanode as platform for the core‐shell self‐assembly of the PBI based quantasome architecture (QS), templated around the tetra‐ruthenated polyoxometalate as oxygen evolving catalyst ({[PBI] 5 Ru 4 POM} n ). Rendering the bio‐inspired QS on the WO 3 3D‐NS surface yields an incident‐photon‐to‐current‐conversion efficiency (IPCE) of 0.67%, using green photons for oxygenic photosynthesis (500 nm at 0.91 V vs. RHE) which stems from a multiheterojunction molecular array for light harvesting and charge transport, representing a significative advancement in the field.
- 8 July 2025
- Published by Wiley in Advanced Energy and Sustainability Research
- Vol. 6 (11)
Open AccessOrganic‐Inorganic Photosynthetic Interfaces Built on Intertwined WO 3 Nanosheets for Enhanced HBr/H 2 O Photoanodic Oxidations
Using a sacrificial ZnO template, this study report the fabrication of fluorine‐doped tin oxide (FTO)‐based photoanodes displaying a porous network of interconnected 3D‐tungsten oxide nanosheets (WO 3 3D‐NS), with diameter/thickness distribution respectively in the range 0.20–0.94 μm and 10–40 nm, leading to record aspect ratios (≈100) with respect to literature benchmarks (≈10) and dominant {001} facets. WO 3 3D‐NS provide an ideal platform for shaping hybrid photosynthetic interfaces by deposition of supramolecular perylenebisimide polymers (PBI n ). The combined WO 3 3D‐NS|PBI n are probed for photoelectrochemical HBr splitting using low energy photons (λ > 450 nm), with up to a 83% increase of the state‐of‐the‐art performance based on WO 3 ‐analogs (J > 0.3 mA cm −2 at 0.85 V vs. reversible hydrogen electrode (RHE)). Structure versus reactivity comparison with WO 3 microplates (WO 3 MP) and inverse opal (WO 3 IO) points to a favorable enhanced active surface area of WO 3 3D‐NS exposing dominant {001} facets, which promote PBI sensitization and charge transfer at the photoanode|electrolyte interface. Building on this technology, a >50% improvement of photoanodic water splitting is achieved using WO 3 3D‐NS photoanode as platform for the core‐shell self‐assembly of the PBI based quantasome architecture (QS), templated around the tetra‐ruthenated polyoxometalate as oxygen evolving catalyst ({[PBI] 5 Ru 4 POM} n ). Rendering the bio‐inspired QS on the WO 3 3D‐NS surface yields an incident‐photon‐to‐current‐conversion efficiency (IPCE) of 0.67%, using green photons for oxygenic photosynthesis (500 nm at 0.91 V vs. RHE) which stems from a multiheterojunction molecular array for light harvesting and charge transport, representing a significative advancement in the field.
- Open Access
- 6 April 2021
- Published by Wiley in ChemSusChem
- Vol. 14 (8) , 1778
Cover Feature: Rationalizing Photo‐Triggered Hydrogen Evolution Using Polypyridine Cobalt Complexes: Substituent Effects on Hexadentate Chelating Ligands (ChemSusChem 8/2021)
- 6 April 2021
- Published by Wiley in ChemSusChem
- Vol. 14 (8) , 1778
Open AccessCover Feature: Rationalizing Photo‐Triggered Hydrogen Evolution Using Polypyridine Cobalt Complexes: Substituent Effects on Hexadentate Chelating Ligands (ChemSusChem 8/2021)
- 2 March 2021
- Published by Wiley in ChemSusChem
- Vol. 14 (8) , 1874-1885
Rationalizing Photo‐Triggered Hydrogen Evolution Using Polypyridine Cobalt Complexes: Substituent Effects on Hexadentate Chelating Ligands
Four novel polypyridine cobalt(II) complexes were developed based on a hexadentate ligand scaffold bearing either electron‐withdrawing (−CF3) or electron‐donating (−OCH3) groups in different positions of the ligand. Experiments and theoretical calculations were combined to perform a systematic investigation of the effect of the ligand modification on the hydrogen evolution reaction. The results indicated that the position, rather than the type of substituent, was the dominating factor in promoting catalysis. The best performances were observed upon introduction of substituents on the pyridine moiety of the hexadentate ligand, which promoted the formation of the Co(II)H intermediate via intramolecular proton transfer reactions with low activation energy. Quantum yields of 11.3 and 10.1 %, maximum turnover frequencies of 86.1 and 76.6 min−1, and maximum turnover numbers of 5520 and 4043 were obtained, respectively, with a −OCH3 and a −CF3 substituent.
- 2 March 2021
- Published by Wiley in ChemSusChem
- Vol. 14 (8) , 1874-1885
Rationalizing Photo‐Triggered Hydrogen Evolution Using Polypyridine Cobalt Complexes: Substituent Effects on Hexadentate Chelating Ligands
Four novel polypyridine cobalt(II) complexes were developed based on a hexadentate ligand scaffold bearing either electron‐withdrawing (−CF3) or electron‐donating (−OCH3) groups in different positions of the ligand. Experiments and theoretical calculations were combined to perform a systematic investigation of the effect of the ligand modification on the hydrogen evolution reaction. The results indicated that the position, rather than the type of substituent, was the dominating factor in promoting catalysis. The best performances were observed upon introduction of substituents on the pyridine moiety of the hexadentate ligand, which promoted the formation of the Co(II)H intermediate via intramolecular proton transfer reactions with low activation energy. Quantum yields of 11.3 and 10.1 %, maximum turnover frequencies of 86.1 and 76.6 min−1, and maximum turnover numbers of 5520 and 4043 were obtained, respectively, with a −OCH3 and a −CF3 substituent.
- 1 April 2018
- Published by Elsevier in Solid State Ionics
- Vol. 317, 142-148
Searching for new redox-complexes\in organic flow batteries
- 1 April 2018
- Published by Elsevier in Solid State Ionics
- Vol. 317, 142-148
Searching for new redox-complexes\in organic flow batteries
- 8 February 2018
- Published by Elsevier in Polyhedron
- Vol. 140, 99-108
Electrochemical characterization of polypyridine iron(II) and cobalt(II) complexes for organic redox flow batteries
- 8 February 2018
- Published by Elsevier in Polyhedron
- Vol. 140, 99-108
Electrochemical characterization of polypyridine iron(II) and cobalt(II) complexes for organic redox flow batteries
- 1 November 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (22) , 14189-14197
Coupling of Zinc Porphyrin Dyes and Copper Electrolytes: A Springboard for Novel Sustainable Dye-Sensitized Solar Cells
The combination of β-substituted Zn2+ porphyrin dyes and copper-based electrolytes represents a sustainable route for economic and environmentally friendly dye-sensitized solar cells. Remarkably, a new copper electrolyte, [Cu(2-mesityl-1,10-phenanthroline)2]+/2+, exceeds the performance reached by Co2+/3+ and I–/I3– reference electrolytes.
- 1 November 2017
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 56 (22) , 14189-14197
Coupling of Zinc Porphyrin Dyes and Copper Electrolytes: A Springboard for Novel Sustainable Dye-Sensitized Solar Cells
The combination of β-substituted Zn2+ porphyrin dyes and copper-based electrolytes represents a sustainable route for economic and environmentally friendly dye-sensitized solar cells. Remarkably, a new copper electrolyte, [Cu(2-mesityl-1,10-phenanthroline)2]+/2+, exceeds the performance reached by Co2+/3+ and I–/I3– reference electrolytes.
- Open Access
- 16 August 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (33) , 17737-17745
Perylene Diimide Aggregates on Sb-Doped SnO2: Charge Transfer Dynamics Relevant to Solar Fuel Generation
The deposition of perylene diimide-based aggregates (PDI) onto wide band gap n-type Sb-doped SnO2 (ATO) was investigated with the aim of finding efficient and versatile dye-sensitized platforms for photoelectrochemical solar fuel generation. These ATO-PDI photoanodes displayed hydrolytic stability in a wide range of pH (from 1 to 13) and revealed superior performances (up to 1 mA/cm2 net photocurrent at 1 V vs SCE) compared to both WO3-PDI and undoped SnO2-PDI when used in a photoelectrochemical setup for HBr splitting. Although ATO, SnO2, and WO3 are endowed with similar conduction band edge energetics, in ATO the presence of a significant density of intrabandgap states, whose occupancy varies with the applied potential, plays a substantial role in tuning the efficiency of photoinduced charge separation and collection. Furthermore, the investigation of the charge injection kinetics confirmed that, even in the absence of applied bias, ATO and WO3 are the best substrates for the oxidative quenching of poorly reducing PDI excited states, with at least a fraction of them injecting within 2-modified ATO-PDI photoanodes.
- 16 August 2017
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry C
- Vol. 121 (33) , 17737-17745
Open AccessPerylene Diimide Aggregates on Sb-Doped SnO2: Charge Transfer Dynamics Relevant to Solar Fuel Generation
The deposition of perylene diimide-based aggregates (PDI) onto wide band gap n-type Sb-doped SnO2 (ATO) was investigated with the aim of finding efficient and versatile dye-sensitized platforms for photoelectrochemical solar fuel generation. These ATO-PDI photoanodes displayed hydrolytic stability in a wide range of pH (from 1 to 13) and revealed superior performances (up to 1 mA/cm2 net photocurrent at 1 V vs SCE) compared to both WO3-PDI and undoped SnO2-PDI when used in a photoelectrochemical setup for HBr splitting. Although ATO, SnO2, and WO3 are endowed with similar conduction band edge energetics, in ATO the presence of a significant density of intrabandgap states, whose occupancy varies with the applied potential, plays a substantial role in tuning the efficiency of photoinduced charge separation and collection. Furthermore, the investigation of the charge injection kinetics confirmed that, even in the absence of applied bias, ATO and WO3 are the best substrates for the oxidative quenching of poorly reducing PDI excited states, with at least a fraction of them injecting within 2-modified ATO-PDI photoanodes.
- 6 June 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (23) , 14604-14612
Single Walled Carbon Nanohorns as Catalytic Counter Electrodes for Co(III)/(II) Electron Mediators in Dye Sensitized Cells
The electrochemical properties of both pristine Single Walled Carbon Nanohorns (SWCNHS) and their chemically oxidized form (ox-SWCNHS) spray coated onto fluorine doped SnO2 (FTO) were investigated in the framework of the fabrication of cobalt based transparent Dye Sensitized Solar Cells (DSSCs). These new nanocarbon substrates, evaluated in conjunction with the Co(bpy)32+/3+ (bpy = 2,2’ bipyridine) redox mediator, are endowed with excellent electrocatalytic properties, ease of fabrication and very promising stability and display a great potential for replacing the best noble metal and conductive polymer catalytic materials in the building of semi-transparent counter electrodes in new generation photoelectrochemical devices.
- 6 June 2016
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 8 (23) , 14604-14612
Single Walled Carbon Nanohorns as Catalytic Counter Electrodes for Co(III)/(II) Electron Mediators in Dye Sensitized Cells
The electrochemical properties of both pristine Single Walled Carbon Nanohorns (SWCNHS) and their chemically oxidized form (ox-SWCNHS) spray coated onto fluorine doped SnO2 (FTO) were investigated in the framework of the fabrication of cobalt based transparent Dye Sensitized Solar Cells (DSSCs). These new nanocarbon substrates, evaluated in conjunction with the Co(bpy)32+/3+ (bpy = 2,2’ bipyridine) redox mediator, are endowed with excellent electrocatalytic properties, ease of fabrication and very promising stability and display a great potential for replacing the best noble metal and conductive polymer catalytic materials in the building of semi-transparent counter electrodes in new generation photoelectrochemical devices.
- Open Access
- 3 May 2016
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 18 (19) , 13718
Correction: On the stability of manganese tris(β-diketonate) complexes as redox mediators in DSSCs
Correction for ‘On the stability of manganese tris(β-diketonate) complexes as redox mediators in DSSCs' by Stefano Carli et al., Phys. Chem. Chem. Phys., 2016, 18, 5949–5956.
- 3 May 2016
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 18 (19) , 13718
Open AccessCorrection: On the stability of manganese tris(β-diketonate) complexes as redox mediators in DSSCs
Correction for ‘On the stability of manganese tris(β-diketonate) complexes as redox mediators in DSSCs' by Stefano Carli et al., Phys. Chem. Chem. Phys., 2016, 18, 5949–5956.